[PATCH v3 3/3] config/aspeed: Enable NC-SI support

[Ramon Fried]

On Mon, Jul 4, 2022 at 11:21 AM Cédric Le Goater <clg at kaod.org> wrote:
>
> On 7/4/22 09:58, Joel Stanley wrote:
> > Aspeed BMCs are commonly used with NC-SI. A system indicates the driver
> > should configure the link over NC-SI using the device tree.
> >
> > Add it to the defconfig so we get compile coverage of the driver, even
> > if the EVBs do not normally use it.
> >
> > Signed-off-by: Joel Stanley <joel at jms.id.au>
>
> Reviewed-by: Cédric Le Goater <clg at kaod.org>
>
> Thanks,
>
> C.
>
> > ---
> >   configs/evb-ast2500_defconfig | 2 ++
> >   configs/evb-ast2600_defconfig | 2 ++
> >   2 files changed, 4 insertions(+)
> >
> > diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig
> > index 9d2c4f81c5ad..866732117aa7 100644
> > --- a/configs/evb-ast2500_defconfig
> > +++ b/configs/evb-ast2500_defconfig
> > @@ -27,6 +27,7 @@ CONFIG_CMD_DHCP=y
> >   CONFIG_BOOTP_BOOTFILESIZE=y
> >   CONFIG_CMD_MII=y
> >   CONFIG_CMD_PING=y
> > +CONFIG_CMD_NCSI=y
> >   CONFIG_ENV_OVERWRITE=y
> >   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> >   CONFIG_NET_RANDOM_ETHADDR=y
> > @@ -38,6 +39,7 @@ CONFIG_SYS_I2C_ASPEED=y
> >   CONFIG_MMC_SDHCI=y
> >   CONFIG_MMC_SDHCI_ASPEED=y
> >   CONFIG_PHY_REALTEK=y
> > +CONFIG_PHY_NCSI=y
> >   CONFIG_DM_ETH=y
> >   CONFIG_FTGMAC100=y
> >   CONFIG_PHY=y
> > diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
> > index 5c4d8426607c..8be22014bb4e 100644
> > --- a/configs/evb-ast2600_defconfig
> > +++ b/configs/evb-ast2600_defconfig
> > @@ -54,6 +54,7 @@ CONFIG_CMD_DHCP=y
> >   CONFIG_BOOTP_BOOTFILESIZE=y
> >   CONFIG_CMD_MII=y
> >   CONFIG_CMD_PING=y
> > +CONFIG_CMD_NCSI=y
> >   CONFIG_SPL_OF_CONTROL=y
> >   CONFIG_ENV_OVERWRITE=y
> >   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> > @@ -73,6 +74,7 @@ CONFIG_MISC=y
> >   CONFIG_MMC_SDHCI=y
> >   CONFIG_MMC_SDHCI_ASPEED=y
> >   CONFIG_PHY_REALTEK=y
> > +CONFIG_PHY_NCSI=y
> >   CONFIG_DM_ETH=y
> >   CONFIG_DM_MDIO=y
> >   CONFIG_FTGMAC100=y
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>