[PATCH 00/23] blk: Rationalise the block interface
Simon Glass
sjg at chromium.org
Sun Aug 7 17:46:45 CEST 2022
The block interface has two separate implementations, one using driver
model and one not. The latter is really only needed for SPL, where
size constraints allegedly don't allow use of driver model. Of course
we still need space for filesystems and other code, so it isn't clear
that driver model is anything more than the straw that breaks the
camel's back.
The driver model version uses a uclass ID for the interface time, but
converts back and forth between that and if_type, which is the legacy
type.
The HAVE_BLOCK_DEVICE define is mostly a hangover from the old days.
At present its main purpose is to enable the legacy block implementation
in SPL.
Finally the use of 'select' to enable BLK does not work very well. It
causes kconfig errors when another option depends on BLK and it is
not recommended by the kconfig style guide.
This series aims to clean things up:
- Enable BLK based on whether different media types are used, but still
allow boards to disable it
- Rename HAVE_BLOCK_DEVICE to indicates its real purpose
- Drop if_type and use the uclass instead
- Drop some obsolete if_type values
An issue not resolved by this series is that the sandbox host interface
does not actually have a device. At present it uses the root device, which
was convenience for the driver model conversion but not really correct. It
should be possible to clean this up, in a future series.
Another minor issue is the use of UCLASS_USB for a mass-storage device.
This has been the case for a while and is not addresed by this series,
other than to add a comment.
Note that this test relies on Tom Rini's series to drop various boards
including warp and cm_t335
Finally, a patch is included to make binman put fake files in a
subdirectory, since repeated runs of certain boards can cause unrelated
failues (e.g. chromebook_coral) when fake files are left around.
Simon Glass (23):
binman: Put fake files in a subdirectory
disk: Correct help for TPL_PARTITIONS
blk: Enable CONFIG_BLK for all media
ata: Fix an instance of SPL_SATA_SUPPORT
sandbox: Avoid defining HAVE_BLOCK_DEVICE in Konfig
disk: Use Makefile to omit partition drivers
blk: Use a function for whether block devices are available
cmd: Drop use of HAVE_BLOCK_DEVICE
blk: Drop unnecessary #ifdef in in blk_legacy
blk: Rename HAVE_BLOCK_DEVICE
blk: Select SPL_LEGACY_BLOCK automatically
blk: Drop unnecessary CONFIG_SPL_LEGACY_BLOCK in defconfigs
blk: Hide the BLK and SPL_LEGACY_BLOCK options
blk: Drop IF_TYPE_DOC
ide: Use a flag for an ATAPI device
blk: Drop IF_TYPE_ATAPI
blk: Drop IF_TYPE_SD
blk: Rename var in blk_get_devnum_by_typename()
blk: Rewrite if_type to name functions
efi: Correct assumption about if_type
blk: Switch over to using uclass IDs
blk: Drop if_type
blk: Rename if_type to uclass_id
arch/Kconfig | 1 -
arch/arm/Kconfig | 1 -
.../mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 +-
board/st/common/stm32mp_dfu.c | 2 +-
board/toradex/common/tdx-cfg-block.c | 4 +-
cmd/Kconfig | 5 -
cmd/Makefile | 2 +-
cmd/bcb.c | 4 +-
cmd/blk_common.c | 18 +-
cmd/ide.c | 2 +-
cmd/lsblk.c | 2 +-
cmd/mmc.c | 10 +-
cmd/mvebu/bubt.c | 2 +-
cmd/nvme.c | 4 +-
cmd/pvblock.c | 2 +-
cmd/sata.c | 4 +-
cmd/scsi.c | 2 +-
cmd/usb.c | 2 +-
cmd/virtio.c | 2 +-
common/spl/Kconfig | 2 -
common/spl/spl_sata.c | 2 +-
common/spl/spl_usb.c | 2 +-
common/usb_storage.c | 10 +-
configs/M5253DEMO_defconfig | 1 +
configs/axm_defconfig | 1 -
configs/bcm968380gerg_ram_defconfig | 1 -
.../gardena-smart-gateway-mt7688_defconfig | 1 -
configs/nsim_hs38_defconfig | 1 -
configs/qemu-ppce500_defconfig | 1 -
disk/Kconfig | 4 +-
disk/Makefile | 4 +
disk/disk-uclass.c | 11 +-
disk/part.c | 156 +++++--------
disk/part_amiga.c | 4 -
disk/part_dos.c | 4 -
disk/part_efi.c | 3 -
disk/part_iso.c | 3 -
disk/part_mac.c | 3 -
doc/develop/driver-model/migration.rst | 2 +-
doc/develop/uefi/uefi.rst | 2 +-
doc/usage/partitions.rst | 2 +-
drivers/Makefile | 3 +-
drivers/ata/Kconfig | 4 +-
drivers/ata/dwc_ahsata.c | 2 +-
drivers/ata/fsl_sata.c | 2 +-
drivers/ata/sata.c | 2 +-
drivers/ata/sata_mv.c | 2 +-
drivers/ata/sata_sil.c | 2 +-
drivers/block/Kconfig | 20 +-
drivers/block/Makefile | 2 +-
drivers/block/blk-uclass.c | 219 +++++++++---------
drivers/block/blk_legacy.c | 60 +++--
drivers/block/efi_blk.c | 2 +-
drivers/block/ide.c | 16 +-
drivers/block/sandbox.c | 14 +-
drivers/dfu/dfu_mmc.c | 6 +-
drivers/mmc/Kconfig | 1 -
drivers/mmc/mmc-uclass.c | 12 +-
drivers/mmc/mmc_legacy.c | 8 +-
drivers/mmc/mmc_write.c | 4 +-
drivers/net/fsl_enetc.c | 12 +-
drivers/net/fsl_enetc.h | 2 +-
drivers/nvme/Kconfig | 2 -
drivers/nvme/nvme.c | 2 +-
drivers/scsi/Kconfig | 2 -
drivers/scsi/scsi.c | 12 +-
drivers/tee/optee/rpmb.c | 4 +-
drivers/virtio/Kconfig | 1 -
drivers/virtio/virtio_blk.c | 4 +-
drivers/xen/Kconfig | 1 -
drivers/xen/pvblock.c | 6 +-
env/mmc.c | 4 +-
fs/fat/fat.c | 4 +-
include/blk.h | 141 +++++------
include/efi_api.h | 4 +-
include/efi_loader.h | 4 +-
include/mmc.h | 2 +-
lib/efi_driver/efi_block_device.c | 4 +-
lib/efi_loader/Kconfig | 1 -
lib/efi_loader/efi_device_path.c | 2 +-
lib/efi_loader/efi_device_path_to_text.c | 4 +-
lib/efi_loader/efi_disk.c | 28 +--
lib/efi_loader/efi_net.c | 2 +-
lib/efi_loader/efi_var_file.c | 4 +-
test/dm/blk.c | 24 +-
tools/binman/control.py | 10 +-
tools/binman/entry.py | 25 +-
tools/binman/ftest.py | 30 ++-
88 files changed, 492 insertions(+), 523 deletions(-)
--
2.37.1.559.g78731f0fdb-goog
More information about the U-Boot
mailing list