[RFC PATCH 13/17] sunxi: add early Allwinner R528/T113 SoC support
Andre Przywara
andre.przywara at arm.com
Tue Dec 6 01:45:45 CET 2022
This adds the remaining code bits to teach U-Boot about Allwinner's
newest SoC generation. This was introduced with the RISC-V based
Allwinner D1 SoC, which actually shares a die with the ARM cores versions
called R528 (BGA, without DRAM) and T113s (QFP, with embedded DRAM).
This adds the new Kconfig stanza, using the two newly introduced symbols
for the new SoC generation and pincontroller. It also adds the new symbols
to the relavent code places, to set all the hardcoded bits directly.
We just chicken out the DRAM controller code for now with a stub to make
it compile. There is GPLed code out there that can be used, although that
still looks very much like the disassembly/decompile it came from.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
.../arm/include/asm/arch-sunxi/clock_sun50i_h6.h | 5 +++++
arch/arm/mach-sunxi/Kconfig | 16 ++++++++++++++++
arch/arm/mach-sunxi/board.c | 4 ++++
arch/arm/mach-sunxi/clock_sun50i_h6.c | 2 ++
arch/arm/mach-sunxi/cpu_info.c | 2 ++
board/sunxi/Makefile | 1 +
board/sunxi/dram_sun8i_r528.c | 9 +++++++++
drivers/mmc/sunxi_mmc.c | 1 +
drivers/pinctrl/sunxi/Kconfig | 1 +
9 files changed, 41 insertions(+)
create mode 100644 board/sunxi/dram_sun8i_r528.c
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index 8471e11aa02..d34a9baf5e1 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -288,6 +288,11 @@ struct sunxi_ccm_reg {
/* apb1 bit field */
#define CCM_APB1_DEFAULT 0x03000102
+#elif CONFIG_MACH_SUN8I_R528
+#define CCM_PLL6_DEFAULT 0xe8216300
+#define CCM_PSI_AHB1_AHB2_DEFAULT 0x03000002
+//#define CCM_AHB3_DEFAULT 0x03000002
+#define CCM_APB1_DEFAULT 0x03000102
#endif
/* apb2 bit field */
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b59db212fa8..71799686a05 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -51,6 +51,12 @@ config DRAM_SUN50I_H616
Select this dram controller driver for some sun50i platforms,
like H616.
+config DRAM_SUN8I_R528
+ bool
+ help
+ Select this DRAM controller driver for the R528, T113, D1
+ and D1s/F133 SoC.
+
if DRAM_SUN50I_H616
config DRAM_SUN50I_H616_WRITE_LEVELING
bool "H616 DRAM write leveling"
@@ -318,6 +324,15 @@ config MACH_SUN8I_R40
select PHY_SUN4I_USB
imply SPL_SYS_I2C_LEGACY
+config MACH_SUN8I_R528
+ bool "sun8i (Allwinner R528)"
+ select CPU_V7A
+ select SUNXI_GEN_NCAT2
+ select SUNXI_NEW_PINCTRL
+ select MMC_SUNXI_HAS_NEW_MODE
+ select SUPPORT_SPL
+ select DRAM_SUN8I_R528
+
config MACH_SUN8I_V3S
bool "sun8i (Allwinner V3/V3s/S3/S3L)"
select CPU_V7A
@@ -622,6 +637,7 @@ config SYS_CONFIG_NAME
default "sun6i" if MACH_SUN6I
default "sun7i" if MACH_SUN7I
default "sun8i" if MACH_SUN8I
+ default "sun8i" if MACH_SUN8I_R528
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
default "sun50i" if MACH_SUN50I_H6
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 3763ec3d2e4..33331cda5e2 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -148,6 +148,10 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_R528)
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(2), 6);
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(3), 6);
+ sunxi_gpio_set_pull(SUNXI_GPE(3), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUNIV)
sunxi_gpio_set_cfgpin(SUNXI_GPA(2), SUNIV_GPE_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPA(3), SUNIV_GPE_UART0);
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 607efe6a9c1..4d5e23a9af4 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -38,7 +38,9 @@ void clock_init_safe(void)
CCM_CPU_AXI_DEFAULT_FACTORS);
writel(CCM_PSI_AHB1_AHB2_DEFAULT, &ccm->psi_ahb1_ahb2_cfg);
+#ifdef CCM_AHB3_DEFAULT
writel(CCM_AHB3_DEFAULT, &ccm->ahb3_cfg);
+#endif
writel(CCM_APB1_DEFAULT, &ccm->apb1_cfg);
/*
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index 7eef178859b..7fecc3b88dd 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -93,6 +93,8 @@ int print_cpuinfo(void)
printf("CPU: Allwinner R40 (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN8I_V3S
printf("CPU: Allwinner V3s (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_R528
+ puts("CPU: Allwinner R528 (SUN8I)\n");
#elif defined CONFIG_MACH_SUN9I
puts("CPU: Allwinner A80 (SUN9I)\n");
#elif defined CONFIG_MACH_SUN50I
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 7763b032c80..db16cf247c6 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -12,4 +12,5 @@ obj-$(CONFIG_SUN7I_GMAC) += gmac.o
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o
+obj-$(CONFIG_DRAM_SUN8I_R528) += dram_sun8i_r528.o
obj-$(CONFIG_CHIP_DIP_SCAN) += chip.o
diff --git a/board/sunxi/dram_sun8i_r528.c b/board/sunxi/dram_sun8i_r528.c
new file mode 100644
index 00000000000..84261df1cd8
--- /dev/null
+++ b/board/sunxi/dram_sun8i_r528.c
@@ -0,0 +1,9 @@
+/*
+ * Quick hack to make it compile, we cannot use the SPL just yet.
+ * There is GPLed DRAM code in awboot, to be lifted here, after some
+ * massaging.
+ */
+unsigned long sunxi_dram_init(void)
+{
+ return 128 * 1024 * 1024;
+}
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 6ce2729473c..59b1bbd4a9c 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -736,6 +736,7 @@ static const struct udevice_id sunxi_mmc_ids[] = {
{ .compatible = "allwinner,sun50i-h6-emmc" },
{ .compatible = "allwinner,sun50i-a100-mmc" },
{ .compatible = "allwinner,sun50i-a100-emmc" },
+ { .compatible = "allwinner,sun20i-d1-mmc" },
{ /* sentinel */ }
};
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index c8f937d91e9..cbd61795986 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -126,6 +126,7 @@ config PINCTRL_SUN50I_H616_R
config PINCTRL_SUN20I_D1
bool "Support for the Allwinner D1/R528 PIO"
+ default MACH_SUN8I_R528
select PINCTRL_SUNXI
endif
--
2.35.5
More information about the U-Boot
mailing list