[RFC PATCH 14/17] sunxi: refactor serial base addresses to avoid asm/arch/cpu.h
Andre Przywara
andre.przywara at arm.com
Tue Dec 6 01:45:46 CET 2022
At the moment we have each SoC's memory map defined in its own cpu.h,
which is included in include/configs/sunxi_common.h. This will be a
problem with the introduction of Allwinner RISC-V support.
Remove the inclusion of that header file from the common config header,
instead move the required serial base addresses (for the SPL) into a
separate header file. Then include the original cpu.h file only where
we really need it, which is only under arch/arm now.
This disentangles the architecture specific header files from the
generic code.
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
arch/arm/cpu/armv7/sunxi/sram.c | 1 +
arch/arm/cpu/armv8/fel_utils.S | 1 +
arch/arm/include/asm/arch-sunxi/clock.h | 1 +
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 15 ---------
.../include/asm/arch-sunxi/cpu_sun50i_h6.h | 5 ---
arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 7 ----
.../include/asm/arch-sunxi/cpu_sunxi_ncat2.h | 5 ---
arch/arm/include/asm/arch-sunxi/serial.h | 32 +++++++++++++++++++
arch/arm/mach-sunxi/gtbus_sun9i.c | 1 +
arch/arm/mach-sunxi/timer.c | 1 +
include/configs/sunxi-common.h | 2 +-
11 files changed, 38 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/include/asm/arch-sunxi/serial.h
diff --git a/arch/arm/cpu/armv7/sunxi/sram.c b/arch/arm/cpu/armv7/sunxi/sram.c
index 28564c2846a..28ff6a1b7c2 100644
--- a/arch/arm/cpu/armv7/sunxi/sram.c
+++ b/arch/arm/cpu/armv7/sunxi/sram.c
@@ -12,6 +12,7 @@
#include <common.h>
#include <init.h>
#include <asm/io.h>
+#include <asm/arch/cpu.h>
void sunxi_sram_init(void)
{
diff --git a/arch/arm/cpu/armv8/fel_utils.S b/arch/arm/cpu/armv8/fel_utils.S
index 5266515f145..9b1d55bb31a 100644
--- a/arch/arm/cpu/armv8/fel_utils.S
+++ b/arch/arm/cpu/armv8/fel_utils.S
@@ -10,6 +10,7 @@
#include <config.h>
#include <asm/system.h>
#include <linux/linkage.h>
+#include <asm/arch/cpu.h>
/*
* We don't overwrite save_boot_params() here, to save the FEL state upon
diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
index 3d34261b0e5..fcc8966cb0b 100644
--- a/arch/arm/include/asm/arch-sunxi/clock.h
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -9,6 +9,7 @@
#define _SUNXI_CLOCK_H
#include <linux/types.h>
+#include <asm/arch/cpu.h>
#define CLK_GATE_OPEN 0x1
#define CLK_GATE_CLOSE 0x0
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index d6fe51f24bc..3daee2f574a 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -128,20 +128,6 @@ defined(CONFIG_MACH_SUN50I)
#define SUNXI_CPUCFG_BASE 0x01c25c00
#endif
-#ifdef CONFIG_MACH_SUNIV
-#define SUNXI_UART0_BASE 0x01c25000
-#define SUNXI_UART1_BASE 0x01c25400
-#define SUNXI_UART2_BASE 0x01c25800
-#else
-#define SUNXI_UART0_BASE 0x01c28000
-#define SUNXI_UART1_BASE 0x01c28400
-#define SUNXI_UART2_BASE 0x01c28800
-#endif
-#define SUNXI_UART3_BASE 0x01c28c00
-#define SUNXI_UART4_BASE 0x01c29000
-#define SUNXI_UART5_BASE 0x01c29400
-#define SUNXI_UART6_BASE 0x01c29800
-#define SUNXI_UART7_BASE 0x01c29c00
#define SUNXI_PS2_0_BASE 0x01c2a000
#define SUNXI_PS2_1_BASE 0x01c2a400
@@ -208,7 +194,6 @@ defined(CONFIG_MACH_SUN50I)
#endif
#define SUNXI_R_TWI_BASE 0x01f02400
-#define SUNXI_R_UART_BASE 0x01f02800
#define SUN6I_P2WI_BASE 0x01f03400
#define SUNXI_RSB_BASE 0x01f03400
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
index 9b6bf843601..15ee092d358 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
@@ -42,10 +42,6 @@
#define SUNXI_DRAM_PHY0_BASE 0x04800000
#endif
-#define SUNXI_UART0_BASE 0x05000000
-#define SUNXI_UART1_BASE 0x05000400
-#define SUNXI_UART2_BASE 0x05000800
-#define SUNXI_UART3_BASE 0x05000C00
#define SUNXI_TWI0_BASE 0x05002000
#define SUNXI_TWI1_BASE 0x05002400
#define SUNXI_TWI2_BASE 0x05002800
@@ -67,7 +63,6 @@
#define SUNXI_R_CPUCFG_BASE 0x07000400
#define SUNXI_PRCM_BASE 0x07010000
#define SUNXI_R_WDOG_BASE 0x07020400
-#define SUNXI_R_UART_BASE 0x07080000
#define SUNXI_R_TWI_BASE 0x07081400
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
index 20025be2319..2bf2675d5c1 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
@@ -86,12 +86,6 @@
#define SUNXI_LRADC_BASE (REGS_APB0_BASE + 0x1800)
/* APB1 Module */
-#define SUNXI_UART0_BASE (REGS_APB1_BASE + 0x0000)
-#define SUNXI_UART1_BASE (REGS_APB1_BASE + 0x0400)
-#define SUNXI_UART2_BASE (REGS_APB1_BASE + 0x0800)
-#define SUNXI_UART3_BASE (REGS_APB1_BASE + 0x0C00)
-#define SUNXI_UART4_BASE (REGS_APB1_BASE + 0x1000)
-#define SUNXI_UART5_BASE (REGS_APB1_BASE + 0x1400)
#define SUNXI_TWI0_BASE (REGS_APB1_BASE + 0x2800)
#define SUNXI_TWI1_BASE (REGS_APB1_BASE + 0x2C00)
#define SUNXI_TWI2_BASE (REGS_APB1_BASE + 0x3000)
@@ -100,7 +94,6 @@
/* RCPUS Module */
#define SUNXI_PRCM_BASE (REGS_RCPUS_BASE + 0x1400)
-#define SUNXI_R_UART_BASE (REGS_RCPUS_BASE + 0x2800)
#define SUNXI_RSB_BASE (REGS_RCPUS_BASE + 0x3400)
/* Misc. */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h b/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
index 13093085a5e..d01508517c3 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
@@ -27,10 +27,6 @@
#define SUNXI_MMC1_BASE 0x04021000
#define SUNXI_MMC2_BASE 0x04022000
-#define SUNXI_UART0_BASE 0x02500000
-#define SUNXI_UART1_BASE 0x02500400
-#define SUNXI_UART2_BASE 0x02500800
-#define SUNXI_UART3_BASE 0x02500C00
#define SUNXI_TWI0_BASE 0x02502000
#define SUNXI_TWI1_BASE 0x02502400
#define SUNXI_TWI2_BASE 0x02502800
@@ -42,7 +38,6 @@
#define SUNXI_R_CPUCFG_BASE 0x07000400
#define SUNXI_PRCM_BASE 0x07010000
#define SUNXI_R_WDOG_BASE 0x07020400
-#define SUNXI_R_UART_BASE 0x07080000
#define SUNXI_R_TWI_BASE 0x07081400
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-sunxi/serial.h b/arch/arm/include/asm/arch-sunxi/serial.h
new file mode 100644
index 00000000000..9386287b65e
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/serial.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * hardcoded UART base addresses for early SPL use
+ *
+ * Copyright (c) 2022 Arm Ltd.
+ */
+
+#ifndef SUNXI_SERIAL_MEMMAP_H
+#define SUNXI_SERIAL_MEMMAP_H
+
+#if defined(CONFIG_MACH_SUN9I)
+#define SUNXI_UART0_BASE 0x07000000
+#define SUNXI_R_UART_BASE 0x08002800
+#elif defined(CONFIG_SUN50I_GEN_H6)
+#define SUNXI_UART0_BASE 0x05000000
+#define SUNXI_R_UART_BASE 0x07080000
+#elif defined(CONFIG_MACH_SUNIV)
+#define SUNXI_UART0_BASE 0x01c25000
+#define SUNXI_R_UART_BASE 0
+#elif defined(CONFIG_SUNXI_GEN_NCAT2)
+#define SUNXI_UART0_BASE 0x02500000
+#define SUNXI_R_UART_BASE 0 // 0x07080000 (?>
+#else
+#define SUNXI_UART0_BASE 0x01c28000
+#define SUNXI_R_UART_BASE 0x01f02800
+#endif
+
+#define SUNXI_UART1_BASE (SUNXI_UART0_BASE + 0x400)
+#define SUNXI_UART2_BASE (SUNXI_UART0_BASE + 0x800)
+#define SUNXI_UART3_BASE (SUNXI_UART0_BASE + 0xc00)
+
+#endif /* SUNXI_SERIAL_MEMMAP_H */
diff --git a/arch/arm/mach-sunxi/gtbus_sun9i.c b/arch/arm/mach-sunxi/gtbus_sun9i.c
index cf011c4cfa7..5624621b500 100644
--- a/arch/arm/mach-sunxi/gtbus_sun9i.c
+++ b/arch/arm/mach-sunxi/gtbus_sun9i.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/gtbus_sun9i.h>
#include <asm/arch/sys_proto.h>
diff --git a/arch/arm/mach-sunxi/timer.c b/arch/arm/mach-sunxi/timer.c
index fc9d419a25e..9a6f6c06d8c 100644
--- a/arch/arm/mach-sunxi/timer.c
+++ b/arch/arm/mach-sunxi/timer.c
@@ -10,6 +10,7 @@
#include <time.h>
#include <asm/global_data.h>
#include <asm/io.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/timer.h>
#include <linux/delay.h>
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 720768629d6..d594e9aaf88 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -12,7 +12,6 @@
#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H
-#include <asm/arch/cpu.h>
#include <linux/stringify.h>
/* Serial & console */
@@ -25,6 +24,7 @@
#define CONFIG_SYS_NS16550_CLK 24000000
#endif
#ifndef CONFIG_DM_SERIAL
+#include <asm/arch/serial.h>
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
--
2.35.5
More information about the U-Boot
mailing list