[PATCH v2 1/1] Kconfig: clean up skipping low-level initialization

[Heinrich Schuchardt]

Put all entries for skipping low-level initialization into a sub-menu.
Use different titles for main U-Boot, SPL, TPL.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
v2:
	adjust the placement of the words SPL and TPL in the titles
---
 arch/Kconfig | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 102956d24c..112dcfe00f 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -381,9 +381,11 @@ config SYS_IMMR
 	  Address for the Internal Memory-Mapped Registers (IMMR) window used
 	  to configure the features of many Freescale / NXP SoCs.
 
-config SKIP_LOWLEVEL_INIT
-	bool "Skip the calls to certain low level initialization functions"
+menu "Skipping low level initialization functions"
 	depends on ARM || MIPS || RISCV
+
+config SKIP_LOWLEVEL_INIT
+	bool "Skip calls to certain low level initialization functions"
 	help
 	  If enabled, then certain low level initializations (like setting up
 	  the memory controller) are omitted and/or U-Boot does not relocate
@@ -393,8 +395,8 @@ config SKIP_LOWLEVEL_INIT
 	  debugger which performs these initializations itself.
 
 config SPL_SKIP_LOWLEVEL_INIT
-	bool "Skip the calls to certain low level initialization functions"
-	depends on SPL && (ARM || MIPS || RISCV)
+	bool "Skip calls to certain low level initialization functions in SPL"
+	depends on SPL
 	help
 	  If enabled, then certain low level initializations (like setting up
 	  the memory controller) are omitted and/or U-Boot does not relocate
@@ -404,7 +406,7 @@ config SPL_SKIP_LOWLEVEL_INIT
 	  debugger which performs these initializations itself.
 
 config TPL_SKIP_LOWLEVEL_INIT
-	bool "Skip the calls to certain low level initialization functions"
+	bool "Skip calls to certain low level initialization functions in TPL"
 	depends on SPL && ARM
 	help
 	  If enabled, then certain low level initializations (like setting up
@@ -415,7 +417,7 @@ config TPL_SKIP_LOWLEVEL_INIT
 	  debugger which performs these initializations itself.
 
 config SKIP_LOWLEVEL_INIT_ONLY
-	bool "Skip the call to lowlevel_init during early boot ONLY"
+	bool "Skip call to lowlevel_init during early boot ONLY"
 	depends on ARM
 	help
 	  This allows just the call to lowlevel_init() to be skipped. The
@@ -423,7 +425,7 @@ config SKIP_LOWLEVEL_INIT_ONLY
 	  performed.
 
 config SPL_SKIP_LOWLEVEL_INIT_ONLY
-	bool "Skip the call to lowlevel_init during early boot ONLY"
+	bool "Skip call to lowlevel_init during early SPL boot ONLY"
 	depends on SPL && ARM
 	help
 	  This allows just the call to lowlevel_init() to be skipped. The
@@ -431,13 +433,15 @@ config SPL_SKIP_LOWLEVEL_INIT_ONLY
 	  performed.
 
 config TPL_SKIP_LOWLEVEL_INIT_ONLY
-	bool "Skip the call to lowlevel_init during early boot ONLY"
+	bool "Skip call to lowlevel_init during early TPL boot ONLY"
 	depends on TPL && ARM
 	help
 	  This allows just the call to lowlevel_init() to be skipped. The
 	  normal CP15 init (such as enabling the instruction cache) is still
 	  performed.
 
+endmenu
+
 config SYS_HAS_NONCACHED_MEMORY
 	bool "Enable reserving a non-cached memory area for drivers"
 	depends on (ARM || MIPS) && (RTL8169 || MEDIATEK_ETH)
-- 
2.37.2