[PATCH 3/8] sata: Rearrange Kconfig for SATA

[Stefan Roese]

On 1/31/22 15:49, Simon Glass wrote:
> Move the SATA options inside an 'if SATA' part, so they are grouped.
> 
> Fix the 'Complient' typo while we are here.
> 
> Signed-off-by: Simon Glass <sjg at chromium.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
> 
>   drivers/ata/Kconfig | 71 +++++++++++++++++++++++----------------------
>   1 file changed, 37 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 1def9305dd5..6e8363c04d9 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -48,16 +48,6 @@ config SPL_AHCI_PCI
>   	depends on SPL_PCI
>   	depends on SPL_SATA_SUPPORT && DM_SCSI
>   
> -config SATA_CEVA
> -	bool "Ceva Sata controller"
> -	depends on AHCI
> -	depends on DM_SCSI
> -	help
> -	  This option enables Ceva Sata controller hard IP available on Xilinx
> -	  ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
> -	  AHCI 1.3 specifications with hot-plug detect feature.
> -
> -
>   config DWC_AHCI
>   	bool "Enable Synopsys DWC AHCI driver support"
>   	select SCSI_AHCI
> @@ -83,30 +73,6 @@ config DWC_AHSATA_AHCI
>   	help
>   	  Enable this option unless you need your private ahci implementation
>   
> -config FSL_SATA
> -	bool "Enable Freescale SATA controller driver support"
> -	select AHCI
> -	select LIBATA
> -	help
> -	  Enable this driver to support the SATA controller found in
> -	  some Freescale PowerPC SoCs.
> -
> -config SATA_MV
> -	bool "Enable Marvell SATA controller driver support"
> -	select AHCI
> -	select LIBATA
> -	help
> -	  Enable this driver to support the SATA controller found in
> -	  some Marvell SoCs.
> -
> -config SATA_SIL
> -	bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
> -	select AHCI
> -	select LIBATA
> -	help
> -	  Enable this driver to support the SIL3131, SIL3132 and SIL3124
> -	  SATA controllers.
> -
>   config SUNXI_AHCI
>   	bool "Enable Allwinner SATA driver support"
>   	depends on AHCI
> @@ -134,4 +100,41 @@ config MTK_AHCI
>   	  Enable this driver to support Sata devices through
>   	  Mediatek AHCI controller (e.g. MT7622).
>   
> +if SATA
> +
> +config SATA_CEVA
> +	bool "Ceva Sata controller"
> +	depends on AHCI
> +	depends on DM_SCSI
> +	help
> +	  This option enables Ceva Sata controller hard IP available on Xilinx
> +	  ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and
> +	  AHCI 1.3 specifications with hot-plug detect feature.
> +
> +config FSL_SATA
> +	bool "Enable Freescale SATA controller driver support"
> +	select AHCI
> +	select LIBATA
> +	help
> +	  Enable this driver to support the SATA controller found in
> +	  some Freescale PowerPC SoCs.
> +
> +config SATA_MV
> +	bool "Enable Marvell SATA controller driver support"
> +	select AHCI
> +	select LIBATA
> +	help
> +	  Enable this driver to support the SATA controller found in
> +	  some Marvell SoCs.
> +
> +config SATA_SIL
> +	bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
> +	select AHCI
> +	select LIBATA
> +	help
> +	  Enable this driver to support the SIL3131, SIL3132 and SIL3124
> +	  SATA controllers.
> +
> +endif # SATA
> +
>   endmenu

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de