February 2022 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Feb 1 00:25:33 CET 2022
Ending: Mon Feb 28 23:53:21 CET 2022
Messages: 2599

• i.MX8M Mini Hangs at ATF when booting from USB   Peng Fan (OSS)
• [PATCH 00/27] imx: imx8ulp: misc update from downstream   Peng Fan (OSS)
• [PATCH 01/27] imx: imx8ulp: Set COUNTER_FREQUENCY to 1Mhz   Peng Fan (OSS)
• [PATCH 02/27] imx: imx8ulp: include pcc/cgc header in clock header   Peng Fan (OSS)
• [PATCH 03/27] imx: imx8ulp: Add M33 handshake functions   Peng Fan (OSS)
• [PATCH 04/27] imx: imx8ulp: clock: Add clock support for i3c controller   Peng Fan (OSS)
• [PATCH 05/27] imx: imx8ulp: add CAAM clock entry   Peng Fan (OSS)
• [PATCH 06/27] imx: imx8ulp_evk: Remove PMIC Bucks PWM mode settings   Peng Fan (OSS)
• [PATCH 07/27] imx: imx8ulp: add ND/LD clock   Peng Fan (OSS)
• [PATCH 08/27] imx: imx8ulp_evk: Skip init DDR for reboot in dual boot mode   Peng Fan (OSS)
• [PATCH 09/27] imx: imx8ulp: cgc: Switch to NICLPAV to FRO192 before PLL4 init   Peng Fan (OSS)
• [PATCH 10/27] imx: imx8ulp: enable MU0_B clk by default   Peng Fan (OSS)
• [PATCH 11/27] misc: imx8ulp: Add OEM SRK Hash fuse support   Peng Fan (OSS)
• [PATCH 12/27] imx: imx8ulp: Change LPAV assignment for dual boot   Peng Fan (OSS)
• [PATCH 13/27] imx: imx8ulp: Load the lposc fuse for dual boot   Peng Fan (OSS)
• [PATCH 14/27] misc: S400_API: add ahab_release_caam   Peng Fan (OSS)
• [PATCH 15/27] misc: S400_API: Update S400 API for buffer dump   Peng Fan (OSS)
• [PATCH 16/27] imx: imx8ulp: release CAAM for the Cortex-A35   Peng Fan (OSS)
• [PATCH 17/27] imx: imx8ulp_evk: Update LPDDR4 PHY settings   Peng Fan (OSS)
• [PATCH 18/27] imx: imx8ulp_evk: call the handshake with M33   Peng Fan (OSS)
• [PATCH 19/27] imx: imx8ulp_evk: Power down the domains may used in u-boot   Peng Fan (OSS)
• [PATCH 20/27] imx: dynamic setting mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH 21/27] imx: imx8ulp_evk: Enable SD/MMC port auto detect   Peng Fan (OSS)
• [PATCH 22/27] imx: imx8ulp: enable wdog_ad interrupt in CMC1   Peng Fan (OSS)
• [PATCH 23/27] imx: imx8ulp: reserve tee memory   Peng Fan (OSS)
• [PATCH 24/27] imx: imx8ulp_evk: enlarge CONFIG_NR_DRAM_BANKS   Peng Fan (OSS)
• [PATCH 25/27] dt-bindings: power: imx8ulp: include power entry header   Peng Fan (OSS)
• [PATCH 26/27] imx: imx8ulp_evk: Enable multiple env storage devices   Peng Fan (OSS)
• [PATCH 27/27] misc: imx8ulp: Update fuse driver   Peng Fan (OSS)
• [PATCH 1/4] imx: imx8mp: detect i.MX8MP UltraLite when get cpu rev   Peng Fan (OSS)
• [PATCH 2/4] imx: imx8mp: disable fused IP for UltraLite   Peng Fan (OSS)
• [PATCH 3/4] imx: imx8m: soc: runtime drop extcon property from usbotg node   Peng Fan (OSS)
• [PATCH 4/4] imx8m: soc: drop phy-reset-gpios for fec   Peng Fan (OSS)
• [PATCH v2] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Peng Fan (OSS)
• [PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Peng Fan (OSS)
• [PATCH] imx8mn-*-evk: rename mkimage config   Peng Fan (OSS)
• [PATCH] ARM: imx: imx8mn-evk: change environment address variables   Peng Fan (OSS)
• [PATCH 1/2] ARM: imx: imx8mn-evk: generate a single bootable flash.bin   Peng Fan (OSS)
• [PATCH 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards   Peng Fan (OSS)
• [PATCH 1/2] fsl-layerscape: add dtb overlay feature   Sahil Malhotra (OSS)
• [PATCH 1/2] fsl-layerscape: add dtb overlay feature   Sahil Malhotra (OSS)
• [PATCH] armv8: fsl-layerscape: use previous aligned address for gic_lpi_base   Wasim Khan (OSS)
• N00b need help - U-Boot 2015.01-gfe79c6daed-dirty - How to detect CPU | how to backup firmware | how to boot custom-firmware  
• Issue with spi-uclass.c and mxc_spi.c when DM_SPI_FLASH is enabled   Abder
• [PATCH] arm: dts: imx8mq kernel dts updates   Angus Ainslie
• [PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit   Angus Ainslie
• [PATCH v2] arm: dts: imx8mq kernel dts updates   Angus Ainslie
• [PATCH] mach-imx: iomux-v3: add a define for the SION bit   Angus Ainslie
• [PATCH 0/2] Fixes for the dwc3 driver   Angus Ainslie
• [PATCH 1/2] usb: dwc3: dwc3-generic: check the parent nodes   Angus Ainslie
• [PATCH 2/2] usb: dwc3: core: stop the core when it's removed   Angus Ainslie
• [PATCH] core: devres: don't use devres code when CONFIG_DEVRES is not defined   Angus Ainslie
• [PATCH] phy: phy-uclass: check the parents for phys   Angus Ainslie
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Angus Ainslie
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Angus Ainslie
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Angus Ainslie
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Angus Ainslie
• [PATCH] core: devres: don't use devres code when CONFIG_DEVRES is not defined   Angus Ainslie
• [PATCH v2] core: devres: optionally build devres into the SPL   Angus Ainslie
• [PATCH 0/2] ARM: at91: sama7g5: Reset external devices at software reset   Tudor Ambarus
• [PATCH 1/2] configs: Convert AT91RESET_EXTRST to Kconfig   Tudor Ambarus
• [PATCH 2/2] ARM: at91: sama7g5: Reset external devices at software reset   Tudor Ambarus
• [PATCH 1/4] cmd: clk: test the number of argument in setfreq command   Sean Anderson
• [PATCH 2/4] cmd: clk: replace clk_lookup by uclass_get_device_by_name   Sean Anderson
• [PATCH 3/4] cmd: clk: update result of do_clk_setfreq   Sean Anderson
• [PATCH 4/4] cmd: clk: fix long help message   Sean Anderson
• [PATCH 1/7] clk: Make rfree return void   Sean Anderson
• [PATCH] clk: ccf: correct the test on the parent uclass in clk_enable/clk_disable   Sean Anderson
• [PATCH] clk: update clk_clean_rate_cache to use private clk struct   Sean Anderson
• [PATCH 1/7] clk: Make rfree return void   Sean Anderson
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Sean Anderson
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Sean Anderson
• [PATCH] apple: Fix debug uart clock rate   Sean Anderson
• Running qemu tests on RISC-V   Sean Anderson
• [PATCH 00/14] Add support for NVMEM API   Sean Anderson
• [PATCH 01/14] sandbox: net: Remove fake-host-hwaddr   Sean Anderson
• [PATCH 02/14] sandbox: Remove eth2addr from environment   Sean Anderson
• [PATCH 03/14] test: eth: Add test for ethernet addresses   Sean Anderson
• [PATCH 04/14] sandbox: Move some mac addresses to device tree   Sean Anderson
• [PATCH 05/14] misc: i2c_eeprom: Make i2c_eeprom_write use a const buf   Sean Anderson
• [PATCH 06/14] misc: Add support for nvmem cells   Sean Anderson
• [PATCH 07/14] sandbox: Enable NVMEM   Sean Anderson
• [PATCH 08/14] rtc: Implement nvmem interface   Sean Anderson
• [PATCH 09/14] misc: i2c_eeprom: Implement nvmem interface   Sean Anderson
• [PATCH 10/14] misc: Implement nvmem interface   Sean Anderson
• [PATCH 11/14] net: Add support for reading mac addresses from nvmem cells   Sean Anderson
• [PATCH 12/14] test: Load mac address with i2c eeprom   Sean Anderson
• [PATCH 13/14] test: Load mac address using RTC   Sean Anderson
• [PATCH 14/14] test: Load mac address using misc device   Sean Anderson
• [PATCH 00/14] Add support for NVMEM API   Sean Anderson
• [PATCH] spl: add %z support for tiny-printf   Sean Anderson
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Sean Anderson
• Unable to select a different ENV location due env_get_location on zynqmp   Sean Anderson
• [PATCH 1/2] Split CONFIG_CC_OPTIMIZE_FOR_SIZE into two configs   Sean Anderson
• [PATCH 2/2] Add option to use -Og   Sean Anderson
• [PATCH 1/2] armv8: fsl-layerscape: Respect Kconfig for erratum A009007   Sean Anderson
• [PATCH 2/2] arm: layerscape: Disable erratum A009007 on LS1021A, LS1043A, and LS1046A   Sean Anderson
• [PATCH 1/7] k210: use the board vendor name rather than the marketing name   Sean Anderson
• [PATCH 2/7] k210: dts: add missing power bus clocks   Sean Anderson
• [PATCH 3/7] k210: dts: fix fpioa node   Sean Anderson
• [PATCH 6/7] pinctrl: k210: Fix loop in k210_pc_get_drive()   Sean Anderson
• [PATCH 7/7] pinctrl: k210: Fix bias-pull-up   Sean Anderson
• [PATCH 4/7] spi: dw: Force set K210 fifo length to 31   Sean Anderson
• [PATCH 5/7] spi: dw: Actually mask interrupts   Sean Anderson
• [BUG] include/generated/environment.h included incorrectly   Sean Anderson
• [PATCH v1 1/1] clk: nuvoton: Add support for NPCM845   Sean Anderson
• [PATCH v2 5/5] clk: scmi: register scmi clocks with CCF   Sean Anderson
• [PATCH 1/4] cmd: clk: test the number of argument in setfreq command   Sean Anderson
• [PATCH] clk: ccf: correct the test on the parent uclass in clk_enable/clk_disable   Sean Anderson
• [PATCH v3 0/1] clk: Clean up optional helpers, and add API docs to HTML   Sean Anderson
• [GIT PULL] clock changes for v2022.04-rc2   Sean Anderson
• [PATCH] clk: Consolidate some clock functions   Sean Anderson
• [PATCH 1/7] clk: Make rfree return void   Sean Anderson
• [PATCH 06/14] misc: Add support for nvmem cells   Sean Anderson
• [EXT] RE: [PATCH v10 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   ZHIZHIKIN Andrey
• [PATCH] arm: dts: k3-j7200: Fix up MAIN R5FSS cluster mode back to Split-mode   Suman Anna
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   Ilias Apalodimas
• [RFC PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   Ilias Apalodimas
• [RFC PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   Ilias Apalodimas
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   Ilias Apalodimas
• [RFC PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   Ilias Apalodimas
• [PATCH 1/2] efi_loader: fix dual signed image certification   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [RFC PATCH] efi_loader: fix uefi secure boot with intermediate certs   Ilias Apalodimas
• [RFC PATCH] efi_loader: fix uefi secure boot with intermediate certs   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   Ilias Apalodimas
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Ilias Apalodimas
• [RFC PATCH] efi_loader: fix uefi secure boot with intermediate certs   Ilias Apalodimas
• [PATCH 01/10] tpm: Move tpm-utils header under the include directory   Ilias Apalodimas
• [PATCH 02/10] tpm: rng: Change tpm_get_random to return an int   Ilias Apalodimas
• [PATCH 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Ilias Apalodimas
• [PATCH v2 3/4] arm: xea: config: Provide special defconfig for a single binary u-boot   Stefano Babic
• [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [PATCH v4] apalis/colibri_imx6: move setting bootcmd to defconfig   Stefano Babic
• [PATCH v5] apalis/colibri_imx6: move setting bootcmd to defconfig   Stefano Babic
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Stefano Babic
• [PATCH v1] imx: imx8qm: cgtqmx8: switch to binman   Stefano Babic
• [PATCH v4 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Stefano Babic
• [PATCH] udoo_neo: Move to DM for REGUALTOR/PMIC/I2C drivers   Stefano Babic
• [PATCH 2/2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Stefano Babic
• [PATCH 1/2] mmc: fsl_esdhc_imx: Fix fsl_esdhc_wait_dat0   Stefano Babic
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20220220   Stefano Babic
• [PATCH] Makefile: Sort u-boot-initial-env output   Stefano Babic
• [PATCH v12] driver: spi: add bcm iproc qspi support   Roman Bacik
• Falcon Mode Support For Uncompressed Kernel Images   Nathan Barrett-Morrison
• Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Nathan Barrett-Morrison
• [PATCH] common: spl: spl_spi: Add in FIT image support for kernel/OS loading during Falcon boot mode while booting via SPI   Nathan Barrett-Morrison
• [PATCH] common: spl: spl_mmc: Add full FIT image support for kernel/OS loading during Falcon boot mode while booting via MMC   Nathan Barrett-Morrison
• [PATCH] tools/mrvl_uart.sh: Remove script   Marek Behún
• [RFC PATCH v2 21/21] test: hush: Fix loop tests for hush 2021   Marek Behún
• [RFC PATCH v2 19/21] test: hush: Fix if tests for hush 2021   Marek Behún
• [PATCH u-boot-marvell RFC] PLEASE TEST: ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Marek Behún
• kwboot: Marvell Dove UART booting   Marek Behún
• kwboot: Marvell Dove UART booting   Marek Behún
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Marek Behún
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Marek Behún
• [PATCH u-boot-mvebu 3/3] arm: mvebu: a37xx: Fix comment with name of the function   Marek Behún
• [PATCH u-boot-mvebu 1/3] arm: mvebu: a37xx: Fix calling build_mem_map()   Marek Behún
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Marek Behún
• [PATCH u-boot-marvell RFC] PLEASE TEST: ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Marek Behún
• [PATCH u-boot-marvell] ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Marek Behún
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Marek Behún
• [PATCH u-boot-marvell 2/2] arm: mvebu: turris_omnia: Reset the board immediately on DDR training failure   Marek Behún
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Marek Behún
• [PATCH u-boot-marvell v2 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Marek Behún
• [PATCH u-boot-marvell v2 2/2] arm: mvebu: turris_omnia: Reset the board immediately on DDR training failure   Marek Behún
• [PATCH u-boot-mvebu 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value   Marek Behún
• [PATCH u-boot-mvebu 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards   Marek Behún
• [PATCH u-boot-mvebu 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu   Marek Behún
• [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Marek Behún
• [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Marek Behún
• [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Marek Behún
• [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Marek Behún
• [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Marek Behún
• [PATCH 1/2] pci: pci_mvebu: Remove unused SELECT and lane_mask   Marek Behún
• [PATCH 2/2] pci: pci_mvebu: Cleanup macro names   Marek Behún
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Enable ext4 write support in defconfig   Marek Behún
• [PATCH u-boot-marvell] arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function again   Marek Behún
• [PATCH u-boot-mvebu] watchdog: armada_37xx: Probe driver also when watchdog is already running   Marek Behún
• [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Marek Behún
• [PATCH u-boot-marvell] arm64: a37xx: pinctrl: Fix PWM pins indexes   Marek Behún
• [PATCH] drivers/adc/rockchip-saradc: remove double semi-colon   Giulio Benetti
• [PATCH] build: allow a downstream suffix in the version shown during boot   Nicolas Boulenguez
• Early debug UART not working on AM33XX SoC   Felix Brack
• Early debug UART not working on AM33XX SoC   Felix Brack
• Early debug UART not working on AM33XX SoC   Felix Brack
• [PATCH] arm: pdu001: Fix dt to work with the current am33xx dtsi files   Felix Brack
• [PATCH] arm: am33xx: Fix early debug UART initialization   Felix Brack
• [PATCH] arm: am33xx: Fix early debug UART initialization   Felix Brack
• [PATCH] arm: pdu001: Fix early debugging UART   Felix Brack
• [PATCH] arm: pdu001: Setup pinmux for console UART as early as possible   Felix Brack
• [PATCH] arm: pdu001: Setup pinmux for console UART as early as possible   Felix Brack
• [PATCH] arm: am33xx: Fix early debug UART initialization   Felix Brack
• [PATCH] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Bryan Brattlof
• [PATCH] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Bryan Brattlof
• [PATCH] rpi: always set fdt_addr to the correct value   Matthias Brugger
• [PATCH] rpi: always set fdt_addr to the correct value   Matthias Brugger
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Patrice CHOTARD
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Patrice CHOTARD
• bind/unbind command not working for usb_ether   Patrice CHOTARD
• bind/unbind command not working for usb_ether   Patrice CHOTARD
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Patrice CHOTARD
• bind/unbind command not working for usb_ether   Patrice CHOTARD
• bind/unbind command not working for usb_ether   Patrice CHOTARD
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Patrice CHOTARD
• [PATCH] video: stm32: stm32_ltdc: fix the check of return value of clk_set_rate()   Patrice CHOTARD
• [PATCH] board: st: common: update test on misc_read result in command stboard   Patrice CHOTARD
• [PATCH 1/2] stm32mp: bsec: add permanent lock write support   Patrice CHOTARD
• [PATCH 2/2] stm32mp1: bsec: add missing dev in function comment   Patrice CHOTARD
• [PATCH v2 1/2] ram: stm32mp1: Unconditionally enable ASR   Patrice CHOTARD
• [PATCH v2 2/2] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Patrice CHOTARD
• [PATCH] mtd: rawnand: stm32_fmc2: add NAND Write Protect support   Patrice CHOTARD
• [PATCH] arm: dts: stm32mp15: alignment with v5.17   Patrice CHOTARD
• [PATCH v2] spi: Add spi_get_bus_and_cs() new use_dt param   Patrice CHOTARD
• [PATCH] button: adc: set state to pressed when the voltage is closest to nominal   Peter Cai
• [PATCH] adc: rockchip-saradc: add support for getting reference voltage value   Peter Cai
• [PATCH v2] adc: rockchip-saradc: add support for getting reference voltage value   Peter Cai
• [PATCH 1/5] doc: binding: scmi: link to latest Linux kernel binding   Etienne Carriere
• [PATCH 2/5] sandbox: scmi: test against a single scmi agent   Etienne Carriere
• [PATCH 3/5] scmi: change parameter dev in devm_scmi_process_msg   Etienne Carriere
• [PATCH 4/5] firmware: scmi: fix sandbox and related tests for clock discovery   Etienne Carriere
• [PATCH 5/5] clk: scmi: register scmi clocks with CCF   Etienne Carriere
• [PATCH 2/5] sandbox: scmi: test against a single scmi agent   Etienne Carriere
• [PATCH 5/5] clk: scmi: register scmi clocks with CCF   Etienne Carriere
• [PATCH v2 1/5] doc: binding: scmi: link to latest Linux kernel binding   Etienne Carriere
• [PATCH v2 2/5] sandbox: scmi: test against a single scmi agent   Etienne Carriere
• [PATCH v2 3/5] scmi: change parameter dev in devm_scmi_process_msg   Etienne Carriere
• [PATCH v2 4/5] firmware: scmi: fix sandbox and related tests for clock discovery   Etienne Carriere
• [PATCH v2 5/5] clk: scmi: register scmi clocks with CCF   Etienne Carriere
• [PATCH] pstore: Do not fail if a reserved-memory node already exists   Detlev Casanova
• [PATCH v2] pstore: Support already existing reserved-memory node   Detlev Casanova
• k210 spi flash regression   Niklas Cassel
• [PATCH] spi: dw: Fix broken dw_spi_mem_ops()   Niklas Cassel
• [PATCH 0/7] canaan k210 SoC fixes   Niklas Cassel
• [PATCH 1/7] k210: use the board vendor name rather than the marketing name   Niklas Cassel
• [PATCH 2/7] k210: dts: add missing power bus clocks   Niklas Cassel
• [PATCH 3/7] k210: dts: fix fpioa node   Niklas Cassel
• [PATCH 4/7] spi: dw: Force set K210 fifo length to 31   Niklas Cassel
• [PATCH 5/7] spi: dw: Actually mask interrupts   Niklas Cassel
• [PATCH 6/7] pinctrl: k210: Fix loop in k210_pc_get_drive()   Niklas Cassel
• [PATCH 7/7] pinctrl: k210: Fix bias-pull-up   Niklas Cassel
• [PATCH] tools/zynqmp_pm_cfg_obj_convert.py: fix build with Vivado 2021.x   Luca Ceresoli
• [PATCH] Revert "mmc: fsl_esdhc_imx: add wait_dat0() support"   Bough Chen
• [PATCH 1/3] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Bough Chen
• [PATCH v2 0/4] QEMU spike machine support for U-Boot   Rick Chen
• [PATCH 0/3] gpio: Add AST2[456]00 GPIO driver   Ryan Chen
• [PATCH 3/3] net: xilinx: Force a probe failure if it cannot setup phy   Andy Chiu
• [PATCH v2] spi: Add spi_get_bus_and_cs() new use_dt param   Patrice Chotard
• [PATCH v1 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Stanley Chu
• [PATCH v2 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Stanley Chu
• [PATCH v3 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Stanley Chu
• [PATCH v1 1/1] clk: nuvoton: Add support for NPCM845   Stanley Chu
• [PATCH v1 1/1] gpio: npcm: Add support for Nuvoton NPCM SoCs   Stanley Chu
• [PATCH v2] clk: nuvoton: Add support for NPCM845   Stanley Chu
• [PATCH v1] mmc: fsl_esdhc_imx: fix watermark level in dma   Jaehoon Chung
• [PATCH v1] mmc: fsl_esdhc_imx: fix watermark level in dma   Jaehoon Chung
• [PATCH] cmd: mmc: Consider GP partitions in mmc hwpartition user enh start -   Jaehoon Chung
• [PATCH v4 3/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399   Jaehoon Chung
• [PATCH v4 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Jaehoon Chung
• [PATCH 03/19] mmc: call device_probe() after scanning   Jaehoon Chung
• [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [PATCH v2 03/20] mmc: call device_probe() after scanning   Jaehoon Chung
• [PATCH] cmd/mmc: fix output of mmc info for e-MMC   Jaehoon Chung
• [PATCH v3] power: zynqmp: Add power domain driver for ZynqMP   Jaehoon Chung
• [PATCH] rpi: always set fdt_addr to the correct value   Jaehoon Chung
• [PATCH 3/4] arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG   Jaehoon Chung
• [PATCH v2] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Jaehoon Chung
• [PATCH 1/3] arm: mmc: Add "ti,am335-sdhci" compatible for TI's omap_hsmmc driver   Jaehoon Chung
• [PATCH v1 02/11] mmc: sdhci: allow disabling sdma in spl   Jaehoon Chung
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v3 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v3 1/6] imx8m: add regs used by GPMI   Ariel D'Alessandro
• [PATCH v3 2/6] phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific   Ariel D'Alessandro
• [PATCH v3 3/6] iopoll: Extend read_poll_timeout macro to support variable parameters   Ariel D'Alessandro
• [PATCH v3 4/6] net: phy: Add phy_modify() accessor   Ariel D'Alessandro
• [PATCH v3 5/6] net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver   Ariel D'Alessandro
• [PATCH v3 6/6] bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v10 3/9] env: Allow U-Boot scripts to be placed in a .env file   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Patrick DELAUNAY
• [PATCH] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Patrick DELAUNAY
• [PATCH 1/5] doc: binding: scmi: link to latest Linux kernel binding   Patrick DELAUNAY
• [PATCH 2/5] sandbox: scmi: test against a single scmi agent   Patrick DELAUNAY
• [PATCH 3/5] scmi: change parameter dev in devm_scmi_process_msg   Patrick DELAUNAY
• [PATCH 4/5] firmware: scmi: fix sandbox and related tests for clock discovery   Patrick DELAUNAY
• [PATCH 5/5] clk: scmi: register scmi clocks with CCF   Patrick DELAUNAY
• STM32MP: Can't lock PHK fuses through U-Boot cmd's "stm32key" or "fuse"   Patrick DELAUNAY
• STM32MP: Can't lock PHK fuses through U-Boot cmd's "stm32key" or "fuse"   Patrick DELAUNAY
• [PATCH] clk: update clk_clean_rate_cache to use private clk struct   Patrick DELAUNAY
• [PATCH] video: stm32: stm32_ltdc: fix the check of return value of clk_set_rate()   Patrick Delaunay
• [PATCH] board: st: common: update test on misc_read result in command stboard   Patrick Delaunay
• [PATCH 1/2] stm32mp: bsec: add permanent lock write support   Patrick Delaunay
• [PATCH 2/2] stm32mp1: bsec: add missing dev in function comment   Patrick Delaunay
• [PATCH 1/2] mmc: fix error message for unaligned erase request   Patrick Delaunay
• [PATCH 2/2] env: mmc : align erase address and size on erase_grp_size   Patrick Delaunay
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Alistair Delva
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Alistair Delva
• [PATCH] arm: kirkwood: iConnect : Add Ethernet support   Tony Dinh
• [RESEND PATCH] arm: kirkwood: Dockstar : Add DM Ethernet   Tony Dinh
• Marvell Avanta UART booting   Tony Dinh
• [PATCH] tools/mrvl_uart.sh: Remove script   Tony Dinh
• Marvell Avanta UART booting   Tony Dinh
• [PATCH] arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• [PATCH u-boot-marvell 0/7] tools: kwbimage: Support for parsing extended v0 format   Tony Dinh
• kwboot: Marvell Dove UART booting   Tony Dinh
• [PATCH] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Tony Dinh
• [PATCH] configs: ti: use standard configuration nodes naming   Denys Dmytriyenko
• [PATCH v1] mmc: fsl_esdhc_imx: fix watermark level in dma   Fabio Estevam
• [PATCH] Revert "mmc: fsl_esdhc_imx: add wait_dat0() support"   Fabio Estevam
• [PATCH] arm: dts: imx8mq kernel dts updates   Fabio Estevam
• Issue with spi-uclass.c and mxc_spi.c when DM_SPI_FLASH is enabled   Fabio Estevam
• [PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit   Fabio Estevam
• [PATCH v2] arm: dts: imx8mq kernel dts updates   Fabio Estevam
• [PATCH v1] mmc: fsl_esdhc_imx: fix watermark level in dma   Fabio Estevam
• i.MX8M Mini Hangs at ATF when booting from USB   Fabio Estevam
• [PATCH v2 2/5] sunxi: move Cortex SMPEN setting into start.S   Fabio Estevam
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Fabio Estevam
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Fabio Estevam
• [PATCH v3] board: toradex: add verdin imx8m plus support   Fabio Estevam
• [PATCH v1] mmc: fsl_esdhc_imx: fix watermark level in dma   Fabio Estevam
• commit leads to failure while writing env to sdcard (MMC1) on my imx8mq board   Fabio Estevam
• [PATCH v3] board: gateworks: venice: add imx8mn-gw7902 support   Fabio Estevam
• [PATCH] board: gateworks: venice: config file cleanups   Fabio Estevam
• [PATCH 1/3] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Fabio Estevam
• [PATCH 1/2] mmc: fsl_esdhc_imx: Fix fsl_esdhc_wait_dat0   Fabio Estevam
• [PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Fabio Estevam
• [PATCH v3] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Fabio Estevam
• [PATCH 1/2] ARM: imx: imx8mn-*-evk: use reset-gpios in phy node   Fabio Estevam
• [PATCH 1/2] ARM: imx: imx8mn-evk: generate a single bootable flash.bin   Fabio Estevam
• [PATCH 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards   Fabio Estevam
• IMX8MM 4GiB boundary issue   Fabio Estevam
• IMX8MM 4GiB boundary issue   Fabio Estevam
• IMX8MM 4GiB boundary issue   Fabio Estevam
• [PATCH 1/2] ARM: imx: imx8mn-evk: enable DM_SERIAL   Fabio Estevam
• [PATCH] ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string   Fabio Estevam
• [PATCH] pmic: pca9450: Add PCA9450C compatible string   Fabio Estevam
• [PATCH 1/2] ARM: imx: imx8m: Add 933 MHz PLL settings   Fabio Estevam
• [PATCH 2/2] imx8m: ddrphy_utils: Add 3732 MT/s mode   Fabio Estevam
• [PATCH v2 1/2] ARM: imx: imx8mn-evk: enable DM_SERIAL   Fabio Estevam
• [PATCH v2 2/2] ARM: imx: imx8mn-ddr4-evk: enable DM_SERIAL   Fabio Estevam
• [PATCH] imx: imx8mm/imx8mn_beacon: Remove redundant code   Fabio Estevam
• [PATCH v2] imx: imx8qm: cgtqmx8: switch to binman   Fabio Estevam
• [PATCH] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   Fabio Estevam
• [PATCH] configs: imx8m{m,n}_venice_defconfig: add usb support   Fabio Estevam
• [PATCH] imx8m{m,n}_venice: update boot_net script to load fdt   Fabio Estevam
• [PATCH] include: configs: *imx8*: remove IMX_FEC_BASE   Fabio Estevam
• [PATCH] imx8m{m,n}_venice: update env memory layout   Fabio Estevam
• [PATCH] board: gateworks: venice: determine dram size at runtime   Fabio Estevam
• [PATCH] board: gateworks: venice: add imx8mm-gw7903 support   Fabio Estevam
• [PATCH] imx8mn-*-evk: rename mkimage config   Fabio Estevam
• [PATCH 24/27] imx: imx8ulp_evk: enlarge CONFIG_NR_DRAM_BANKS   Fabio Estevam
• [PATCH 02/27] imx: imx8ulp: include pcc/cgc header in clock header   Fabio Estevam
• [PATCH 04/27] imx: imx8ulp: clock: Add clock support for i3c controller   Fabio Estevam
• [PATCH 07/27] imx: imx8ulp: add ND/LD clock   Fabio Estevam
• [PATCH 25/27] dt-bindings: power: imx8ulp: include power entry header   Fabio Estevam
• [PATCH] imx8m{m,n}_venice: update env memory layout   Fabio Estevam
• [PATCH v6 0/7] fpga: zynqmp: Adding support of loading authenticated images   Adrian Fiergolski
• [PATCH v6 1/7] fpga: add option for loading FPGA secure bitstreams   Adrian Fiergolski
• [PATCH v6 2/7] fpga: add fit_fpga_load function   Adrian Fiergolski
• [PATCH v6 3/7] fpga: xilinx: pass an address of xilinx_desc in fpga_desc   Adrian Fiergolski
• [PATCH v6 4/7] fpga: xilinx: add missed identifier names   Adrian Fiergolski
• [PATCH v6 5/7] fpga: xilinx: pass xilinx_desc pointer address into load() ops   Adrian Fiergolski
• [PATCH v6 6/7] fpga: zynqmp: support loading authenticated images   Adrian Fiergolski
• [PATCH v6 7/7] fpga: zynqmp: support loading encrypted bitfiles   Adrian Fiergolski
• FIT image: load secure FPGA   Adrian Fiergolski
• FIT image: load secure FPGA   Adrian Fiergolski
• [PATCH 1/2] arch: x86: lib: acpi_table: Fix MCFG entries   Moritz Fischer
• [PATCH 2/2] acpi: Move MCFG implementation to common lib   Moritz Fischer
• [PATCH 2/2] acpi: Move MCFG implementation to common lib   Moritz Fischer
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Adam Ford
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Adam Ford
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Adam Ford
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Adam Ford
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Adam Ford
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Adam Ford
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• Problem IMX8MN booting legacy kernel and mipi display   Adam Ford
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH 1/7] arch: mach-imx: imx8m: Add FlexSPI addresses for SPL booting   Adam Ford
• [PATCH 2/7] imx8m: Add FlexSPI Configuration Block   Adam Ford
• [PATCH 3/7] imx8m: add image cfg for i.MX8MM FlexSPI booting   Adam Ford
• [PATCH 4/7] arm: dts: imx8mm: Create generic DTSI for booting from FlexSPI   Adam Ford
• [PATCH 5/7] arm: dts: imx8mm-beacon: Enhange FlexSPI/flash nodes   Adam Ford
• [PATCH 6/7] arm: dts: Add imx8mm-beacon-kit-flexspi   Adam Ford
• [PATCH 7/7] imx8m: Add imx8mm_beacon_fspi   Adam Ford
• [PATCH 2/7] imx8m: Add FlexSPI Configuration Block   Adam Ford
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH v3 07/18] pxe: Move pxe_utils files   Adam Ford
• [PATCH 1/2] arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO   Adam Ford
• [PATCH 2/2] arm: omap3: Make some memory functions static and clean headers   Adam Ford
• [PATCH] usb: ehci-omap: Drop dead code   Adam Ford
• Problem IMX8MN booting legacy kernel and mipi display   Adam Ford
• Problem IMX8MN booting legacy kernel and mipi display   Adam Ford
• [PATCH] usb: ehci-omap: Drop dead code   Adam Ford
• [PATCH] usb: ehci-omap: Drop dead code   Adam Ford
• [PATCH 0/7] Migrate omap_ehci to use phy driver   Adam Ford
• [PATCH 1/7] usb: ehci-omap: Drop dead code   Adam Ford
• [PATCH 2/7] usb: ehci-omap: Move omap_ehci_hcd_init to omap_ehci_probe   Adam Ford
• [PATCH 3/7] phy: nop-phy: Fix enabling reset   Adam Ford
• [PATCH 4/7] usb: ehci-omap: Make Kconfig select PHY if USB_EHCI_OMAP   Adam Ford
• [PATCH 5/7] usb: ehci-omap: Use PHY system to manage phy resets   Adam Ford
• [PATCH 6/7] usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from Kconfig   Adam Ford
• [PATCH 7/7] configs: omap various: Remove OMAP_EHCI_PHY from defconfigs   Adam Ford
• [PATCH 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Adam Ford
• [PATCH 2/2] arm: rmobile: rzg2_beacon: Enable proper Ethernet PHY   Adam Ford
• [PATCH 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Adam Ford
• [PATCH] imx: imx8mm/imx8mn_beacon: Remove redundant code   Adam Ford
• [PATCH V2 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Adam Ford
• [PATCH V2 2/2] arm: rmobile: rzg2_beacon: Enable proper Ethernet PHY   Adam Ford
• [PATCH V2 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Adam Ford
• [PATCH V3 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Adam Ford
• [PATCH V3 2/2] arm: rmobile: rzg2_beacon: Enable proper Ethernet PHY   Adam Ford
• [PATCH V2 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Adam Ford
• [PATCH] ARM: am3517-evm: Remove more non-DM legacy ethernet reset code   Adam Ford
• [PATCH 1/2] ARM: dts: logicpd-som-lv: Resync DTS files with Linux 5.17-rc5   Adam Ford
• [PATCH 2/2] ARM: omap3_logic: Remove hard-coded USB muxing   Adam Ford
• [PATCH] ARM: dts: logicpd-torpedo: Resyc DTS files with Linux 5.17-rc5   Adam Ford
• [PATCH 1/2] ARM: dts: am3517-evm: Sync DTS with Linux 5.17-rc5   Adam Ford
• [PATCH 2/2] ARM: am3517_evm: Remove hard-coded pin muxing   Adam Ford
• [PATCH] net: ti: am65-cpsw: Cleanup resources before jump to kernel   Ramon Fried
• [PATCH] net: bootp: Make root path (option 17) length configurable   Ramon Fried
• [PATCH 2/2] net: phy: mv88e6352: Fix miiphy_read/miiphy_write return value checks   Ramon Fried
• [PATCH 2/2] net: phy: mv88e6352: Fix miiphy_read/miiphy_write return value checks   Ramon Fried
• [PATCH 01/14] sandbox: net: Remove fake-host-hwaddr   Ramon Fried
• [PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Christoph Fritz
• [PATCH] image: Control FIT signature verification at runtime   Alex G.
• [PATCH] image: Control FIT signature verification at runtime   Alex G.
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Sughosh Ganu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Sughosh Ganu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Sughosh Ganu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Sughosh Ganu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Sughosh Ganu
• [PATCH v10 6/9] tools: mkeficapsule: allow for specifying GUID explicitly   Sughosh Ganu
• [PATCH v4 00/11] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
• [PATCH v4 03/11] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
• [PATCH v4 04/11] FWU: STM32MP1: Add support to read boot index from backup register   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH v4 06/11] stm32mp1: Populate ImageTypeId values in EFI_FIRMWARE_IMAGE_DESCRIPTOR array   Sughosh Ganu
• [PATCH v4 07/11] FWU: Add boot time checks as highlighted by the FWU specification   Sughosh Ganu
• [PATCH v4 08/11] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [PATCH v4 09/11] FWU: cmd: Add a command to read FWU metadata   Sughosh Ganu
• [PATCH v4 10/11] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
• [PATCH v4 11/11] FWU: doc: Add documentation for the FWU feature   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 00/11] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Sughosh Ganu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Sughosh Ganu
• [PATCH v4 07/11] FWU: Add boot time checks as highlighted by the FWU specification   Sughosh Ganu
• [PATCH v4 10/11] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
• [PATCH v4 10/11] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH 00/10] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH 01/10] tpm: Move tpm-utils header under the include directory   Sughosh Ganu
• [PATCH 02/10] tpm: rng: Change tpm_get_random to return an int   Sughosh Ganu
• [PATCH 03/10] tpm: Fix the return type of tpm_startup   Sughosh Ganu
• [PATCH 04/10] tpm: Move the TPM version detection functions to the uclass driver   Sughosh Ganu
• [PATCH 05/10] configs: gazerbeam: Build TPMV2 library routines   Sughosh Ganu
• [PATCH 06/10] configs: chromebook_coral: Build TPMV1 library routines   Sughosh Ganu
• [PATCH 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH 09/10] qemu: arm: Remove platform specific function to get RNG device   Sughosh Ganu
• [PATCH 10/10] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [PATCH 03/10] tpm: Fix the return type of tpm_startup   Sughosh Ganu
• [PATCH v2 00/10] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v2 01/10] tpm: Move tpm-utils header under the include directory   Sughosh Ganu
• [PATCH v2 02/10] tpm: rng: Change tpm_get_random to return an int   Sughosh Ganu
• [PATCH v2 03/10] tpm: Fix the return type of tpm_startup   Sughosh Ganu
• [PATCH v2 04/10] tpm: Move the TPM version detection functions to the uclass driver   Sughosh Ganu
• [PATCH v2 05/10] configs: gazerbeam: Build TPMV2 library routines   Sughosh Ganu
• [PATCH v2 06/10] configs: chromebook_coral: Build TPMV1 library routines   Sughosh Ganu
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v2 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v2 09/10] qemu: arm: Remove platform specific function to get RNG device   Sughosh Ganu
• [PATCH v2 10/10] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH 22/24] rockchip: Support building the all output files in binman   Peter Geis
• [PATCH 22/24] rockchip: Support building the all output files in binman   Peter Geis
• [PATCH 22/24] rockchip: Support building the all output files in binman   Peter Geis
• [PATCH v1 00/11] rockchip fixes and extend rk3568 support   Peter Geis
• [PATCH v1 01/11] clk: rockchip: rk3568: fix reset handler   Peter Geis
• [PATCH v1 02/11] mmc: sdhci: allow disabling sdma in spl   Peter Geis
• [PATCH v1 03/11] spi: rockchip-sfc: fix building rockchip-sfc   Peter Geis
• [PATCH v1 04/11] spi: rockchip-sfc: sanity check minimum freq   Peter Geis
• [PATCH v1 05/11] spl: support adc drivers in spl   Peter Geis
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Peter Geis
• [PATCH v1 07/11] rockchip: rk3568: add boot device detection   Peter Geis
• [PATCH v1 08/11] rockchip: rk3568: enable automatic clock gating   Peter Geis
• [PATCH v1 09/11] rockchip: move dwc3 config to chip specific handler   Peter Geis
• [PATCH v1 10/11] rockchip: rk3568: add dwc3 otg support   Peter Geis
• [PATCH v1 11/11] [RFC] rockchip: rk356x: attempt to fix ram detection   Peter Geis
• Tips on porting a board from older u-boot versions   Peter Geis
• [PATCH] riscv: Fix build against binutils 2.38   Alexandre Ghiti
• [PATCH] riscv: Fix build against binutils 2.38   Alexandre Ghiti
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• Early debug UART not working on AM33XX SoC   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH 1/7] clk: Make rfree return void   Simon Glass
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Simon Glass
• [PATCH] serial-uclass: fix build warning   Simon Glass
• [PATCH] common: fdt_support: add support for "partitions" subnode to fdt_fixup_mtdparts()   Simon Glass
• [PATCH] mkimage: Improve documentation of algo-name parameter   Simon Glass
• [PATCH] gpio: Enable hogging support in SPL   Simon Glass
• [PATCH] test/py: Add test case for mkimage -o argument   Simon Glass
• [PATCH v4 02/18] arch: sandbox: dts: sandbox.dts: add empty binman node   Simon Glass
• [PATCH v4 01/18] arch: sandbox: add an config SANDBOX_BINMAN   Simon Glass
• make mrproper deletes lib/acpi/dsdt.c   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Simon Glass
• [u-boot][PATCH] binman: Add support for TEE BL32   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• [PATCH v2] adc: rockchip-saradc: add support for getting reference voltage value   Simon Glass
• [PATCH 1/1] binman: add sign option for binman   Simon Glass
• [RFC PATCH v1 16/21] test: hush: Fix variable expansion tests for hush 2021.   Simon Glass
• [PATCH v2] gpio: Enable hogging support in SPL   Simon Glass
• [PATCH] drivers: serial: Make sure we really return a serial device   Simon Glass
• [PATCH] Replace echo -n's used in environment processing with touch   Simon Glass
• [PATCH 1/5] binman: Fix subentry expansion for FIT entry type   Simon Glass
• [PATCH 2/5] binman: Register and check bintools from FIT subentries   Simon Glass
• [PATCH 3/5] binman: Check missing bintools of Section subclasses   Simon Glass
• [PATCH 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Simon Glass
• [PATCH 5/5] binman: Update image positions of FIT subentries   Simon Glass
• [PATCH 0/5] binman: Improvements to FIT entry type   Simon Glass
• [PATCH 1/2] arch: x86: lib: acpi_table: Fix MCFG entries   Simon Glass
• [PATCH 2/2] acpi: Move MCFG implementation to common lib   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• [PATCH v2 1/5] binman: Fix subentry expansion for FIT entry type   Simon Glass
• [PATCH 2/2] acpi: Move MCFG implementation to common lib   Simon Glass
• [PATCH] boot: Update default on USE_SPL_FIT_GENERATOR   Simon Glass
• [PATCH] serial: remove nulldev_serial_input   Simon Glass
• [RFC PATCH] dts: automatically build necessary .dtb files   Simon Glass
• [PATCH v2 1/1] sandbox: fix build failure with musl and SDL   Simon Glass
• [RFC PATCH v2 00/21] Modernize U-Boot shell   Simon Glass
• Compile error with SPL_FIT_FULL_CHECK and SPL_LOAD_FIT_FULL enabled   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• [PATCH] binman: Correct the error message for a bad hash algorithm   Simon Glass
• [PATCH 00/24] binman: rockchip: Migrate from rockchip SPL_FIT_GENERATOR script   Simon Glass
• [PATCH 01/24] moveconfig: Show the config name rather than the defconfig   Simon Glass
• [PATCH 02/24] moveconfig: Allow regex matches when finding combinations   Simon Glass
• [PATCH 03/24] spl: x86: Correct the binman symbols for SPL   Simon Glass
• [PATCH 04/24] spl: Allow disabling binman symbols in SPL   Simon Glass
• [PATCH 05/24] rockchip: evb-rk3288: Drop raw-image support   Simon Glass
• [PATCH 06/24] dtoc: Support adding a string list to a device tree   Simon Glass
• [PATCH 07/24] dtoc: Support deleting a node   Simon Glass
• [PATCH 08/24] dtoc: Allow deleting nodes and adding them in the same sync   Simon Glass
• [PATCH 09/24] dtoc: Support reading a list of arguments   Simon Glass
• [PATCH 10/24] binman: Update docs to indicate mkimage is supported   Simon Glass
• [PATCH 11/24] elf: Add a way to read segment information from an ELF file   Simon Glass
• [PATCH 12/24] WIP: binman: Add support for OP-TEE   Simon Glass
• [PATCH 13/24] binman: Add to the TODO   Simon Glass
• [PATCH 14/24] binman: Support a list of strings with the mkimage etype   Simon Glass
• [PATCH 15/24] binman: Add a ELF test file with disjoint text sections   Simon Glass
• [PATCH 16/24] binman: Move entry-data collection into a Entry method   Simon Glass
• [PATCH 17/24] binman: fit: Refactor to reduce function size   Simon Glass
• [PATCH 18/24] binman: Tidy up the docs a little with fit   Simon Glass
• [PATCH 19/24] binman: Allow different operations in FIT generator nodes   Simon Glass
• [PATCH 20/24] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH 21/24] rockchip: Include binman script in 64-bit boards   Simon Glass
• [PATCH 22/24] rockchip: Support building the all output files in binman   Simon Glass
• [PATCH 23/24] rockchip: Convert all boards to use binman   Simon Glass
• [PATCH 24/24] rockchip: Drop the FIT generator script   Simon Glass
• [PATCH] binman: Correct the error message for a bad hash algorithm   Simon Glass
• [PATCH] boot: Update default on USE_SPL_FIT_GENERATOR   Simon Glass
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Simon Glass
• [PATCH v2 2/5] binman: Register and check bintools from FIT subentries   Simon Glass
• [PATCH v2 3/5] binman: Check missing bintools of Section subclasses   Simon Glass
• [PATCH v2 1/5] binman: Fix subentry expansion for FIT entry type   Simon Glass
• [PATCH 2/2] acpi: Move MCFG implementation to common lib   Simon Glass
• [PATCH 1/2] arch: x86: lib: acpi_table: Fix MCFG entries   Simon Glass
• [PATCH] serial-uclass: fix build warning   Simon Glass
• [PATCH] serial: remove nulldev_serial_input   Simon Glass
• [PATCH 16/17] patman: Update with new pylint scores   Simon Glass
• [PATCH 15/17] patman: Convert camel case in terminal.py   Simon Glass
• [PATCH 14/17] patman: Rename Color() method to build()   Simon Glass
• [PATCH 13/17] patman: Rename Print() to Tprint()   Simon Glass
• [PATCH 10/17] patman: Convert camel case in test_checkpatch.py   Simon Glass
• [PATCH 11/17] patman: Convert camel case in test_util.py   Simon Glass
• [PATCH 12/17] patman: Convert camel case in tout.py   Simon Glass
• [PATCH 09/17] patman: Convert camel case in project.py   Simon Glass
• [PATCH 08/17] patman: Convert camel case in gitutil.py   Simon Glass
• [PATCH 07/17] patman: Convert camel case in get_maintainer.py   Simon Glass
• [PATCH 06/17] patman: Convert camel case in func_test.py   Simon Glass
• [PATCH 05/17] patman: Convert camel case in cros_subprocess.py   Simon Glass
• [PATCH 03/17] patman: Convert camel case in checkpatch.py   Simon Glass
• [PATCH 04/17] patman: Convert camel case in commit.py   Simon Glass
• [PATCH 02/17] patman: Convert camel case in command.py   Simon Glass
• [RFC PATCH] dts: automatically build necessary .dtb files   Simon Glass
• [PATCH 01/17] patman: Convert camel case in tools.py   Simon Glass
• [PATCH v2 1/1] sandbox: fix build failure with musl and SDL   Simon Glass
• [PATCH] dm: Use parenthesis for the device_get_ops macro argument   Simon Glass
• [PATCH v2 5/5] binman: Update image positions of FIT subentries   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• Compile error with SPL_FIT_FULL_CHECK and SPL_LOAD_FIT_FULL enabled   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH] binman: Skip processing "hash" subnodes of FIT subsections   Simon Glass
• Running qemu tests on RISC-V   Simon Glass
• [PATCH v3 07/18] pxe: Move pxe_utils files   Simon Glass
• [PATCH] Replace echo -n's used in environment processing with touch   Simon Glass
• Please pull u-boot-dm (take 2)   Simon Glass
• Please pull u-boot-dm (take 2)   Simon Glass
• Please pull u-boot-dm (take 3)   Simon Glass
• [PATCH v3 07/18] pxe: Move pxe_utils files   Simon Glass
• [PATCH 22/24] rockchip: Support building the all output files in binman   Simon Glass
• Please pull u-boot-dm (take 3)   Simon Glass
• Please pull u-boot-dm (take 3)   Simon Glass
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Simon Glass
• Please pull u-boot-dm (take 3)   Simon Glass
• [PATCH] dm: core: Check flags before removing devices   Simon Glass
• [PATCH 1/1] cmd: add serial console support for the cls command   Simon Glass
• [PATCH 2/2] test: test UTF-16 truncation in sprintf()   Simon Glass
• [PATCH v1 1/1] env: fat: Allow overriding interface, device and partition   Simon Glass
• [PATCH 1/1] test: test field truncation in snprint()   Simon Glass
• [PATCH] rockchip: Set default LNX_KRNL_IMG_TEXT_OFFSET_BASE to SYS_TEXT_BASE   Simon Glass
• [PATCH 04/14] video: nexell: Drop unused and invalid code   Simon Glass
• [PATCH v3] gpio: Enable hogging support in SPL   Simon Glass
• [PATCH v2 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Simon Glass
• [PATCH] scripts: dtc: libfdt: fdt_ro.c: always define fdt_check_full   Simon Glass
• [PATCH v2] binman: Skip processing "hash" subnodes of FIT subsections   Simon Glass
• [ANN] U-Boot v2022.04-rc1 released   Simon Glass
• [ANN] U-Boot v2022.04-rc1 released   Simon Glass
• [PATCH 0/9] Enable the pylint checker in CI   Simon Glass
• [PATCH 1/9] patman: Correct pylint errors   Simon Glass
• [PATCH 2/9] buildman: Correct pylint errors   Simon Glass
• [PATCH 3/9] dtoc: Correct pylint errors   Simon Glass
• [PATCH 4/9] binman: Correct pylint errors   Simon Glass
• [PATCH 5/9] moveconfig: Correct pylint errors   Simon Glass
• [PATCH 6/9] test: Correct pylint errors   Simon Glass
• [PATCH 7/9] Makefile: Add a way to check for pylint errors   Simon Glass
• [PATCH 8/9] buildman: Update default config to build for sandbox   Simon Glass
• [PATCH 9/9] Azure/GitLab CI: Add the pylint checker   Simon Glass
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Simon Glass
• [PATCH v2 1/1] cmd: add serial console support for the cls command   Simon Glass
• [PATCH] arm: apple: Disable debug UART   Simon Glass
• [PATCH] arm: apple: Disable debug UART   Simon Glass
• [PATCH] binman: Include also subnodes in generator nodes   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• make mrproper deletes lib/acpi/dsdt.c   Simon Glass
• [PATCH v1] imx: imx8qm: cgtqmx8: switch to binman   Simon Glass
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH] dm: core: fix uclass_get_by_name   Simon Glass
• [PATCH] lib: acpi: rename dsdt.c to acpi_write_dsdt.c   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH v5 04/16] lib: allow to build asn1 decoder and oid registry in SPL   Simon Glass
• [PATCH v5 03/16] lib: Kconfig: enhance the help of OID_REGISTRY   Simon Glass
• [PATCH v5 02/16] lib: Kconfig: enhance help for ASN1   Simon Glass
• [PATCH v5 05/16] lib: crypto: allow to build crypyo in SPL   Simon Glass
• [PATCH v5 06/16] lib: rsa: allow rsa verify with pkey in SPL   Simon Glass
• [PATCH v5 01/16] arch: Kconfig: imply BINMAN for SANDBOX   Simon Glass
• [PATCH v5 12/16] tools: binman: add support for pre-load header   Simon Glass
• [PATCH 1/1] video: bmp: Support x2r10g10b10 pixel format   Simon Glass
• [PATCH 01/14] sandbox: net: Remove fake-host-hwaddr   Simon Glass
• [PATCH] drivers: serial: Make sure we really return a serial device   Simon Glass
• [u-boot][PATCH] binman: Add support for TEE BL32   Simon Glass
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Simon Glass
• [u-boot PATCH v2] binman: Add support for TEE BL32   Simon Glass
• [PATCH] core: devres: don't use devres code when CONFIG_DEVRES is not defined   Simon Glass
• [PATCH] phy: phy-uclass: check the parents for phys   Simon Glass
• [PATCH] drivers: serial: Make sure we really return a serial device   Simon Glass
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   Simon Glass
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Simon Glass
• [PATCH] drivers: serial: Make sure we really return a serial device   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH v2] binman: Skip processing "hash" subnodes of FIT subsections   Simon Glass
• [PATCH] scripts: dtc: libfdt: fdt_ro.c: always define fdt_check_full   Simon Glass
• [PATCH 19/24] binman: Allow different operations in FIT generator nodes   Simon Glass
• [PATCH 16/24] binman: Move entry-data collection into a Entry method   Simon Glass
• [PATCH 17/24] binman: fit: Refactor to reduce function size   Simon Glass
• [PATCH 14/24] binman: Support a list of strings with the mkimage etype   Simon Glass
• [PATCH 11/24] elf: Add a way to read segment information from an ELF file   Simon Glass
• [PATCH 10/24] binman: Update docs to indicate mkimage is supported   Simon Glass
• [PATCH 09/24] dtoc: Support reading a list of arguments   Simon Glass
• [PATCH 06/24] dtoc: Support adding a string list to a device tree   Simon Glass
• [PATCH 04/24] spl: Allow disabling binman symbols in SPL   Simon Glass
• [PATCH 03/24] spl: x86: Correct the binman symbols for SPL   Simon Glass
• [PATCH 02/24] moveconfig: Allow regex matches when finding combinations   Simon Glass
• [PATCH 01/24] moveconfig: Show the config name rather than the defconfig   Simon Glass
• [PATCH] binman: Correct the error message for a bad hash algorithm   Simon Glass
• [PATCH v2 5/5] binman: Update image positions of FIT subentries   Simon Glass
• [u-boot PATCH v2] binman: Add support for TEE BL32   Simon Glass
• [PATCH] phy: phy-uclass: check the parents for phys   Simon Glass
• [PATCH 01/24] moveconfig: Show the config name rather than the defconfig   Simon Glass
• [PATCH] arm: am33xx: Fix early debug UART initialization   Simon Glass
• [PATCH 03/24] spl: x86: Correct the binman symbols for SPL   Simon Glass
• [PATCH 06/24] dtoc: Support adding a string list to a device tree   Simon Glass
• [PATCH 09/24] dtoc: Support reading a list of arguments   Simon Glass
• [PATCH 11/24] elf: Add a way to read segment information from an ELF file   Simon Glass
• [PATCH 14/24] binman: Support a list of strings with the mkimage etype   Simon Glass
• [PATCH 17/24] binman: fit: Refactor to reduce function size   Simon Glass
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Simon Glass
• [PATCH 20/24] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH] arm: pdu001: Fix early debugging UART   Simon Glass
• [PATCH 1/4] powerpc: Remove unused MPC8540/60ADS code   Simon Glass
• [PATCH] dm: pinctrl: Use explicit values for enums   Simon Glass
• [PATCH] Makefile: Sort u-boot-initial-env output   Simon Glass
• [PATCH v2 00/25] binman: rockchip: Migrate from rockchip SPL_FIT_GENERATOR script   Simon Glass
• [PATCH v2 01/25] dtoc: Make GetArgs() more flexible   Simon Glass
• [PATCH v2 02/25] moveconfig: Remove remove_defconfig()   Simon Glass
• [PATCH v2 03/25] moveconfig: Use re.fullmatch() to avoid extra check   Simon Glass
• [PATCH v2 04/25] spl: Correct Kconfig help for TPL_BINMAN_SYMBOLS   Simon Glass
• [PATCH v2 05/25] dtoc: Tidy up implementation of AddStringList()   Simon Glass
• [PATCH v2 06/25] elf: Rename load_segments() and module failure   Simon Glass
• [PATCH v2 07/25] binman: Tweak collect_contents_to_file() and docs   Simon Glass
• [PATCH v2 08/25] binman: Rename ExpandToLimit to extend_to_limit   Simon Glass
• [PATCH v2 09/25] binman: Rename ExpandEntries to gen_entries   Simon Glass
• [PATCH v2 10/25] binman: Refactor fit to generate output at the end   Simon Glass
• [PATCH v2 11/25] binman: Rename tools parameter to btools   Simon Glass
• [PATCH v2 12/25] binman: Change how faked blobs are created   Simon Glass
• [PATCH v2 13/25] binman: Make fake blobs zero-sized by default   Simon Glass
• [PATCH v2 14/25] binman: Allow mkimage to use a non-zero fake-blob size   Simon Glass
• [PATCH v2 15/25] binman: Read the fit entries only once   Simon Glass
• [PATCH v2 16/25] binman: Fix some pylint warnings in fit   Simon Glass
• [PATCH v2 17/25] binman: Add a consistent way to report errors with fit   Simon Glass
• [PATCH v2 18/25] binman: Update fit to use node instead of subnode   Simon Glass
• [PATCH v2 19/25] binman: Keep a separate list of entries for fit   Simon Glass
• [PATCH v2 20/25] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH v2 21/25] rockchip: evb-rk3288: Drop raw-image support   Simon Glass
• [PATCH v2 22/25] rockchip: Include binman script in 64-bit boards   Simon Glass
• [PATCH v2 23/25] rockchip: Support building the all output files in binman   Simon Glass
• [PATCH v2 24/25] rockchip: Convert all boards to use binman   Simon Glass
• [PATCH v2 25/25] rockchip: Drop the FIT generator script   Simon Glass
• [PATCH] arm: am33xx: Fix early debug UART initialization   Simon Glass
• [PATCH] Makefile: Sort u-boot-initial-env output   Simon Glass
• [PATCH v4 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Simon Glass
• [PATCH v4 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Simon Glass
• [PATCH 1/2] tools: binman: main.py: add build-sandbox in sys.path   Simon Glass
• [PATCH 2/2] tools: binman: main.py: add /tmp/sandbox sys.path   Simon Glass
• [PATCH] spi: Add spi_get_bus_and_cs() new use_dt param   Simon Glass
• [PATCH 1/7] clk: Make rfree return void   Simon Glass
• [PATCH v1 01/15] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Simon Glass
• [PATCH v1 02/15] rockchip: rk3228-cru: sync the clock dt-binding header from Linux   Simon Glass
• [PATCH v1 05/15] rockchip: rk3288-power: sync power domain dt-binding header from Linux   Simon Glass
• [PATCH v1 09/15] rockchip: fix boot_devices constants   Simon Glass
• [PATCH v1 06/15] rockchip: rk3288-cru: sync the clock dt-binding header from Linux   Simon Glass
• [PATCH v1 11/15] arm: dts: rockchip: rename mipi_dsi label in rk3288-evb.dtsi   Simon Glass
• [PATCH v1 12/15] arm: dts: rockchip: remove hdmi_audio node from rk3288-veyron.dtsi   Simon Glass
• [PATCH 02/14] sandbox: Remove eth2addr from environment   Simon Glass
• [PATCH 03/14] test: eth: Add test for ethernet addresses   Simon Glass
• [PATCH 04/14] sandbox: Move some mac addresses to device tree   Simon Glass
• [PATCH 05/14] misc: i2c_eeprom: Make i2c_eeprom_write use a const buf   Simon Glass
• [PATCH 06/14] misc: Add support for nvmem cells   Simon Glass
• [PATCH 07/14] sandbox: Enable NVMEM   Simon Glass
• [PATCH 11/14] net: Add support for reading mac addresses from nvmem cells   Simon Glass
• [PATCH 12/14] test: Load mac address with i2c eeprom   Simon Glass
• [PATCH 13/14] test: Load mac address using RTC   Simon Glass
• [PATCH 14/14] test: Load mac address using misc device   Simon Glass
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Simon Glass
• [PATCH] tools: mkimage/dumpimage: Allow to use -l with -T   Simon Glass
• [PATCH 4/5] firmware: scmi: fix sandbox and related tests for clock discovery   Simon Glass
• [PATCH v2 09/20] dm: add tag support   Simon Glass
• [PATCH v2 10/20] dm: tag: add some document   Simon Glass
• [PATCH v2 11/20] test: dm: add tests for tag support   Simon Glass
• [PATCH] drivers: watchdog: wdt-uclass.c: add a property u-boot, noautostart   Simon Glass
• [PATCH v3 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH] cmd: abootimg: Accept a DTB in second for index 0   Simon Glass
• [PATCH 1/2] arm64: dts: rk3399-rock-pi-4b-u-boot: add optee node   Simon Glass
• [PATCH] core: devres: don't use devres code when CONFIG_DEVRES is not defined   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Simon Glass
• [PATCH v7 00/15] vpl: Introduce a verifying program loader   Simon Glass
• [PATCH v7 01/15] doc: Convert SPL documentation to ReST   Simon Glass
• [PATCH v7 02/15] doc: Expand SPL docs to explain the phase and config   Simon Glass
• [PATCH v7 03/15] test: Tidy up test building with SPL   Simon Glass
• [PATCH v7 04/15] bloblist: Correct Kconfig dependencies   Simon Glass
• [PATCH v7 05/15] avb: Don't build in SPL   Simon Glass
• [PATCH v7 06/15] Makefile: Simplify devicetree rules for SPL/TPL   Simon Glass
• [PATCH v7 07/15] Makefile: Tidy up the TPL build rules   Simon Glass
• [PATCH v7 08/15] Add a default for TPL_TEXT_BASE   Simon Glass
• [PATCH v7 09/15] disk: Correct the conditions for SPL   Simon Glass
• [PATCH v7 10/15] fdt: Correct condition for SEPARATE_BSS   Simon Glass
• [PATCH v7 11/15] fdt: sandbox: Avoid looking for an appended device tree   Simon Glass
• [PATCH v7 12/15] binman: Add VPL support   Simon Glass
• [PATCH v7 13/15] Introduce Verifying Program Loader (VPL)   Simon Glass
• [PATCH v7 14/15] vpl: Add Kconfig options for VPL   Simon Glass
• [PATCH v7 15/15] sandbox: Add a build for VPL   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Simon Glass
• [PATCH 00/18] Various bugfixes related to verified boot   Simon Glass
• [PATCH 01/18] buildman: Update default config to build for sandbox   Simon Glass
• [PATCH 02/18] buildman: Fix up cfgutil   Simon Glass
• [PATCH 03/18] binman: Correct Chromium OS entry types   Simon Glass
• [PATCH 04/18] errno: Avoid including strings in SPL   Simon Glass
• [PATCH 05/18] abuf: Correct a corner case with abuf_realloc()   Simon Glass
• [PATCH 06/18] fdt: Correct condition for SEPARATE_BSS   Simon Glass
• [PATCH 07/18] fdt: sandbox: Avoid looking for an appended device tree   Simon Glass
• [PATCH 08/18] lzma: Tidy up the function prototype   Simon Glass
• [PATCH 09/18] cbfs: Add some more definititions   Simon Glass
• [PATCH 10/18] cros_ec: Complete the comment for cros_ec_read_batt_charge()   Simon Glass
• [PATCH 11/18] spi: Avoid checking console in SPL   Simon Glass
• [PATCH 12/18] disk: Correct the conditions for SPL   Simon Glass
• [PATCH 13/18] Add a default for TPL_TEXT_BASE   Simon Glass
• [PATCH 14/18] Make ASYMMETRIC_KEY_TYPE depend on FIT_SIGNATURE   Simon Glass
• [PATCH 15/18] stdint: Add a definition of UINT8_MAX   Simon Glass
• [PATCH 16/18] dm: core: Add a required struct declaration   Simon Glass
• [PATCH 17/18] dm: core: Tidy up comments in uclass headers   Simon Glass
• [PATCH 18/18] dm: blk: Expand iteration and add tests   Simon Glass
• [PATCH 0/5] sandbox: Minor Fixes in various areas   Simon Glass
• [PATCH 1/5] sandbox: Show a message when writing out the ram buffer   Simon Glass
• [PATCH 2/5] sandbox: Add the handoff header for spl   Simon Glass
• [PATCH 3/5] sandbox: Open host file for read-only access if needed   Simon Glass
• [PATCH 4/5] sandbox: Slow down the LCD sync rate   Simon Glass
• [PATCH 5/5] sandbox: test: Tidy up spl_test_load() calls   Simon Glass
• [PATCH 1/2] x86: Add an enum name for the GNVS firmware type   Simon Glass
• [PATCH 2/2] x86: Correct the coreboot header file in MAINTAINERS   Simon Glass
• [PATCH v1 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Christian Gmeiner
• [PATCH] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Christian Gmeiner
• [PATCH v1 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Christian Gmeiner
• [PATCH v1 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Christian Gmeiner
• [PATCH] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Christian Gmeiner
• [PATCH v2] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Christian Gmeiner
• [PATCH] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Christian Gmeiner
• [PATCH] spi: cadence-qspi: Make reset control optinal   Christian Gmeiner
• [PATCH 0/5] Add ESM driver support for AM64x R5   Christian Gmeiner
• [PATCH v2] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Christian Gmeiner
• [PATCH] configs: j721e_*_evm_a72_defconfig: Enable config for setting mmc speed mode   Aswath Govindraju
• [PATCH 0/2] J721E: Fix bootcmd   Aswath Govindraju
• [PATCH 1/2] configs: j721e_evm_a72_defconfig: Fix the bootcmd   Aswath Govindraju
• [PATCH 2/2] configs: j721e_hs_evm_a72_defconfig: Sync up the bootcmd with GP configs   Aswath Govindraju
• [PATCH 0/2] J721E: Fix bootcmd   Aswath Govindraju
• [PATCH v2 0/3] J721E: Fix initialization of QSGMII PHY   Aswath Govindraju
• [PATCH v2 1/3] include: configs: j721e_evm.h: Fix the env variable corresponding to QSGMII PHY init   Aswath Govindraju
• [PATCH v2 2/3] configs: j721e_evm_a72_defconfig: Fix the bootcmd   Aswath Govindraju
• [PATCH v2 3/3] configs: j721e_hs_evm_a72_defconfig: Add command for initializing QSGMII PHY   Aswath Govindraju
• [PATCH] efi_loader: Ignore DT when ACPI is on   Alexander Graf
• [PATCH] qemu-arm: Enable NVMe for distro boot   Alexander Graf
• [PATCH] lib/acpi: Enable QEMU special cases for ARM   Alexander Graf
• [PATCH] efi_loader: Ignore DT when ACPI is on   Alexander Graf
• [PATCH] qfw: Do not include tables.h on arm   Alexander Graf
• [PATCH] qfw: Allocate ACPI memory using efi logic   Alexander Graf
• [PATCH 0/4] Add support for QEMU's ramfb display   Alexander Graf
• [PATCH 1/4] qfw: Add WRITE definition   Alexander Graf
• [PATCH 2/4] ramfb: Add driver for ramfb display   Alexander Graf
• [PATCH 3/4] qfw: Spawn ramfb device if its file is present   Alexander Graf
• [PATCH 4/4] qemu-arm*: Enable ramfb by default   Alexander Graf
• [PATCH] efi_loader: Ignore DT when ACPI is on   Alexander Graf
• [PATCH 5/5] qemu-riscv: Enable ramfb by default   Alexander Graf
• [PATCH 0/4] Add support for QEMU's ramfb display   Alexander Graf
• ARM: socfpga: gen5: release reset before using USB as device with ums   Wolfgang Grandegger
• ARM: socfpga: gen5: release reset before using USB as device with ums   Wolfgang Grandegger
• [PATCH v1] imx: imx8qm: cgtqmx8: switch to binman   Oliver Graute
• [PATCH v1] imx: imx8qm: cgtqmx8: switch to binman   Oliver Graute
• [PATCH v2] imx: imx8qm: cgtqmx8: switch to binman   Oliver Graute
• [PATCH 1/2] arm64: dts: rk3399-rock-pi-4b-u-boot: add optee node   Peter Griffin
• [PATCH 1/2] arm64: dts: rk3399-rock-pi-4b-u-boot: add optee node   Peter Griffin
• [PATCH 2/2] configs: rock-pi-4: Enable OP-TEE secure os support   Peter Griffin
• [PATCH 1/1] arm: apple: Switch to fully dynamic mem layout   Janne Grunau
• [PATCH 1/1] arm: apple: Switch to fully dynamic mem layout   Janne Grunau
• [PATCH v2 1/1] arm: apple: Switch to fully dynamic mem layout   Janne Grunau
• [PATCH 1/1] iommu: Add M1 Pro/Max support to Apple DART driver   Janne Grunau
• [PATCH 1/1] video: bmp: Support x2r10g10b10 pixel format   Janne Grunau
• [PATCH v3 1/1] arm: apple: Switch to fully dynamic mem layout   Janne Grunau
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Anatolij Gustschin
• Boot logging to file in ESP   Tom Hale
• Single-document documentation format   Tom Hale
• Which board to select for "Rasbperry Pi 4B"   Tom Hale
• Boot from specified partition (or FS) UUID without knowing Device ID   Tom Hale
• Problem IMX8MN booting legacy kernel and mipi display   Tim Harvey
• i.MX8M Mini Hangs at ATF when booting from USB   Tim Harvey
• [PATCH v3] board: gateworks: venice: add imx8mn-gw7902 support   Tim Harvey
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Tim Harvey
• IMX8MM board with 512MB   Tim Harvey
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Tim Harvey
• bind/unbind command not working for usb_ether   Tim Harvey
• [PATCH v3] board: gateworks: venice: add imx8mn-gw7902 support   Tim Harvey
• [PATCH v3] board: gateworks: venice: add imx8mn-gw7902 support   Tim Harvey
• [PATCH v4] board: gateworks: venice: add imx8mn-gw7902 support   Tim Harvey
• [PATCH] board: gateworks: venice: config file cleanups   Tim Harvey
• bind/unbind command not working for usb_ether   Tim Harvey
• bind/unbind command not working for usb_ether   Tim Harvey
• [PATCH] dm: core: fix uclass_get_by_name   Tim Harvey
• [PATCH] dm: core: fix uclass_get_by_name   Tim Harvey
• bind/unbind command not working for usb_ether   Tim Harvey
• [PATCH] include: configs: *imx8*: remove IMX_FEC_BASE   Tim Harvey
• [PATCH] board: gateworks: venice: determine dram size at runtime   Tim Harvey
• [PATCH] board: gateworks: venice: add imx8mm-gw7903 support   Tim Harvey
• [PATCH] imx8m{m,n}_venice: update env memory layout   Tim Harvey
• [PATCH] imx8m{m,n}_venice: update boot_net script to load fdt   Tim Harvey
• [PATCH] configs: imx8m{m,n}_venice_defconfig: add usb support   Tim Harvey
• [PATCH 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards   Tim Harvey
• IMX8MM 4GiB boundary issue   Tim Harvey
• IMX8MM 4GiB boundary issue   Tim Harvey
• dm driver probe and dm question   Tim Harvey
• dm driver probe and dm question   Tim Harvey
• [PATCH] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH] imx8m{m,n}_venice: update env memory layout   Tim Harvey
• phy_connect_dev calling phy_reset???   Tim Harvey
• [PATCH] phy: nop-phy: Fix phy reset if no reset-gpio defined   Tim Harvey
• U-Boot Digest, Vol 165, Issue 29   Walter Heck
• [PATCH V8] arm: add initial support for the Phytium Pomelo Board   Rob Herring
• [PATCH RFC *RFC*] dt-bindings: add U-Boot chosen for environment data phandle   Rob Herring
• [PATCH V2] dt-bindings: nvmem: add U-Boot environment variables binding   Rob Herring
• [PATCH 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Masami Hiramatsu
• [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v2 0/2] EFI: Reset system after capsule-on-disk   Masami Hiramatsu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Masami Hiramatsu
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Masami Hiramatsu
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Masami Hiramatsu
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v2 0/2] EFI: Reset system after capsule-on-disk   Masami Hiramatsu
• [PATCH v2 1/2] efi_loader: use efi_update_capsule_firmware() for capsule on disk   Masami Hiramatsu
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v4 0/2] EFI: Reset system after capsule-on-disk   Masami Hiramatsu
• [PATCH v4 1/2] efi_loader: use efi_update_capsule_firmware() for capsule on disk   Masami Hiramatsu
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH 2/2] mkeficapsule: Support "--flags reset" option   Masami Hiramatsu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Masami Hiramatsu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Masami Hiramatsu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Masami Hiramatsu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Masami Hiramatsu
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Masami Hiramatsu
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Masami Hiramatsu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Masami Hiramatsu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Masami Hiramatsu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Masami Hiramatsu
• [PATCH v4 02/11] FWU: Add FWU metadata access driver for GPT partitioned block devices   Masami Hiramatsu
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH v5 0/4] EFI: Reset system after capsule-on-disk   Masami Hiramatsu
• [PATCH v5 1/4] efi_loader: use efi_update_capsule_firmware() for capsule on disk   Masami Hiramatsu
• [PATCH v5 2/4] test/py: Handle expected reset by command   Masami Hiramatsu
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Masami Hiramatsu
• [PATCH v5 4/4] efi_loader: test/py: Reset system after capsule update on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [RFC PATCH v2 0/8] FWU: Add FWU Multi Bank Update for DeveloerBox   Masami Hiramatsu
• [RFC PATCH v2 1/8] FWU: Calculate CRC32 in fwu_update_mdata()   Masami Hiramatsu
• [RFC PATCH v2 2/8] FWU: Free metadata copy if gpt_get_mdata() failed   Masami Hiramatsu
• [RFC PATCH v2 3/8] synquacer: Update for TBBR based new FIP layout   Masami Hiramatsu
• [RFC PATCH v2 4/8] dt/bindings: firmware: Add FWU metadata on SPI flash binding   Masami Hiramatsu
• [RFC PATCH v2 5/8] FWU: Add FWU metadata access driver for SPI flash   Masami Hiramatsu
• [RFC PATCH v2 6/8] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Masami Hiramatsu
• [RFC PATCH v2 7/8] FWU: synquacer: Initialize broken metadata   Masami Hiramatsu
• [RFC PATCH v2 8/8] configs: synquacer: Add FWU support for DeveloperBox   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [RFC PATCH v2 7/8] FWU: synquacer: Initialize broken metadata   Masami Hiramatsu
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Masami Hiramatsu
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Masami Hiramatsu
• [PATCH v2 2/5] sunxi: move Cortex SMPEN setting into start.S   Samuel Holland
• [PATCH v2 5/5] sunxi-common.h: remove pointless #ifdefs   Samuel Holland
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Z.Q. Hou
• [PATCH] armv8: fsl-layerscape: use previous aligned address for gic_lpi_base   Z.Q. Hou
• [PATCH] arch: arm: recode the initialization of GICv3 ITS Re-Distributor tables   Z.Q. Hou
• [PATCH] tools: pblimage: fix image header verification function   Zhiqiang Hou
• [PATCH] arch: arm: recode the initialization of GICv3 ITS Re-Distributor tables   Zhiqiang Hou
• [PATCH] spl: add %z support for tiny-printf   Du Huanpeng
• [PATCH] ram: aspeed: Rework kconfig options   Dylan Hung
• [EXT] RE: [PATCH v10 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] RE: [PATCH v10 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• pull request of u-boot-fsl-qoriq for v2022.04   Priyanka Jain
• [PATCH 00/10] board: sl28: add sl28cpld support and board cleanups   Priyanka Jain
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Priyanka Jain
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Priyanka Jain
• [PATCH 1/5] armv8: include psci_update_dt() unconditionally   Priyanka Jain
• [PATCH] gpio: Enable hogging support in SPL   Eddie James
• [PATCH v2] gpio: Enable hogging support in SPL   Eddie James
• [PATCH v3] gpio: Enable hogging support in SPL   Eddie James
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH 0/3] gpio: Add AST2[456]00 GPIO driver   Andrew Jeffery
• [PATCH 1/3] gpio: Add Aspeed GPIO driver   Andrew Jeffery
• [PATCH 2/3] ARM: dts: ast2500: Add ngpios property to GPIO node   Andrew Jeffery
• [PATCH 3/3] configs: evb-ast2[56]00: Enable GPIO control   Andrew Jeffery
• [PATCH 0/3] gpio: Add AST2[456]00 GPIO driver   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH v3 0/5] fs/erofs: new filesystem   Huang Jianan
• [PATCH v3 1/5] fs/erofs: add erofs filesystem support   Huang Jianan
• [PATCH v3 2/5] lib/lz4: update LZ4 decompressor module   Huang Jianan
• [PATCH v3 3/5] fs/erofs: add lz4 decompression support   Huang Jianan
• [PATCH v3 4/5] fs/erofs: add filesystem commands   Huang Jianan
• [PATCH v3 5/5] test/py: Add tests for the erofs   Huang Jianan
• [PATCH v4 0/5] fs/erofs: new filesystem   Huang Jianan
• [PATCH v4 1/5] fs/erofs: add erofs filesystem support   Huang Jianan
• [PATCH v4 2/5] lib/lz4: update LZ4 decompressor module   Huang Jianan
• [PATCH v4 3/5] fs/erofs: add lz4 decompression support   Huang Jianan
• [PATCH v4 4/5] fs/erofs: add filesystem commands   Huang Jianan
• [PATCH v4 5/5] test/py: Add tests for the erofs   Huang Jianan
• [PATCH v1 01/15] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v1 02/15] rockchip: rk3228-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v1 03/15] arm: dts: rockchip: sync rk322x.dtsi from Linux   Johan Jonker
• [PATCH v1 04/15] arm: dts: rockchip: sync rk3229-evb.dts from Linux   Johan Jonker
• [PATCH v1 05/15] rockchip: rk3288-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v1 06/15] rockchip: rk3288-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v1 07/15] arm: dts: rockchip: sync rk3288.dtsi from Linux   Johan Jonker
• [PATCH v1 08/15] arm: dts: rockchip: move all rk3288 u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v1 09/15] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH v1 10/15] arm: dts: rockchip: sync rk3288 DT boards from Linux   Johan Jonker
• [PATCH v1 11/15] arm: dts: rockchip: rename mipi_dsi label in rk3288-evb.dtsi   Johan Jonker
• [PATCH v1 12/15] arm: dts: rockchip: remove hdmi_audio node from rk3288-veyron.dtsi   Johan Jonker
• [PATCH v1 13/15] arm: dts: rockchip: move all rk3288-veyron u-boot related properties   Johan Jonker
• [PATCH v1 14/15] arm: dts: rockchip: sync rk3288-veyron DT from Linux   Johan Jonker
• [PATCH v1 15/15] arm: dts: rockchip: rk3288-evb: fix memory reg value   Johan Jonker
• [PATCH v2 1/2] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Johan Jonker
• [PATCH v2 2/2] mmc: dw_mmc: support transfer mode auto detection   Johan Jonker
• [PATCHv2] arm64: zynqmp: Print the secure boot status information   Jorge Ramirez-Ortiz, Foundries
• [PATCHv2] arm64: zynqmp: Print the secure boot status information   Jorge Ramirez-Ortiz, Foundries
• FIT image: load secure FPGA   Jorge Ramirez-Ortiz, Foundries
• Unable to select a different ENV location due env_get_location on zynqmp   Jorge Ramirez-Ortiz, Foundries
• [PATCH 3/4] arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG   Minkyu Kang
• [PATCH] adc: rockchip-saradc: add support for getting reference voltage value   John Keeping
• [PATCH] arm: dts: k3-j721e-r5-common-proc-board: tps659413: Correct the min/max voltages of VDD_CPU   Keerthy
• [PATCH] mtd: rawnand: stm32_fmc2: add NAND Write Protect support   Christophe Kerello
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Mark Kettenis
• [PATCH] drivers: serial: Make sure we really return a serial device   Mark Kettenis
• [PATCH] apple: Fix debug uart clock rate   Mark Kettenis
• [PATCH v2] apple: Fix debug uart clock rate   Mark Kettenis
• [PATCH] apple: Fix debug uart clock rate   Mark Kettenis
• [PATCH 1/1] arm: apple: Switch to fully dynamic mem layout   Mark Kettenis
• [PATCH] drivers: serial: Make sure we really return a serial device   Mark Kettenis
• [PATCH] arm: apple: Add M1 Pro/Max support   Mark Kettenis
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Mark Kettenis
• [PATCH] arm: apple: Disable debug UART   Mark Kettenis
• [PATCH] arm: apple: Disable debug UART   Mark Kettenis
• [PATCH v2 0/2] Disable debug UART for Apple M1   Mark Kettenis
• [PATCH v2 1/2] arm: apple: Disable debug UART   Mark Kettenis
• [PATCH v2 2/2] doc: board: apple: Update Apple M1 documentation   Mark Kettenis
• [PATCH] drivers: serial: Make sure we really return a serial device   Mark Kettenis
• [PATCH] drivers: serial: Make sure we really return a serial device   Mark Kettenis
• [PATCH v2] drivers: serial: Make sure we really return a serial device   Mark Kettenis
• [PATCH] drivers: serial: Remove code that binds devices pre-reloc   Mark Kettenis
• [PATCH] drivers: serial: Make sure we really return a serial device   Mark Kettenis
• IMX8MM 4GiB boundary issue   Mark Kettenis
• IMX8MM 4GiB boundary issue   Mark Kettenis
• [PATCH] efi_loader: Ignore DT when ACPI is on   Mark Kettenis
• [PATCH] qemu-arm: Enable NVMe for distro boot   Mark Kettenis
• [PATCH] armv8: fsl-layerscape: use previous aligned address for gic_lpi_base   Wasim Khan
• [PATCH v4] sf: Query write-protection status before operating the flash   Jan Kiszka
• [PATCH v4] sf: Query write-protection status before operating the flash   Jan Kiszka
• [PATCH v4] sf: Query write-protection status before operating the flash   Jan Kiszka
• [PATCH] mkimage: Improve documentation of algo-name parameter   Jan Kiszka
• [PATCH] test/py: Add test case for mkimage -o argument   Jan Kiszka
• [PATCH v4] sf: Query write-protection status before operating the flash   Jan Kiszka
• [PATCH v2] mkimage: Improve documentation of algo-name parameter   Jan Kiszka
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Jan Kiszka
• [PATCH] binman: Include also subnodes in generator nodes   Jan Kiszka
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Jan Kiszka
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Jan Kiszka
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Jan Kiszka
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Jan Kiszka
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Jan Kiszka
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Jan Kiszka
• [PATCH] arm: dts: iot2050: Add cfg register space for ringacc and udmap   Jan Kiszka
• [PATCH v2] binman: Include also subnodes in generator nodes   Jan Kiszka
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Jan Kiszka
• [PATCH] watchdog: rti_wdt: Add 10% safety margin to clock frequency   Jan Kiszka
• [PATCH v5 0/2] sf: Check protection before writing/erasing flash   Jan Kiszka
• [PATCH v5 1/2] mtd: spi: Convert is_locked callback to is_unlocked   Jan Kiszka
• [PATCH v5 2/2] sf: Query write-protection status before operating the flash   Jan Kiszka
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Jan Kiszka
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Jan Kiszka
• [PATCH v3] binman: Include also subnodes in generator nodes   Jan Kiszka
• [PATCH] lx2160a: Fix distroboot device list for configs without USB/SCSI/etc   Daniel Klauer
• [PATCH 1/2] miiphyutil: Fix inconsistent miiphy_write() error return value   Daniel Klauer
• [PATCH 2/2] net: phy: mv88e6352: Fix miiphy_read/miiphy_write return value checks   Daniel Klauer
• [PATCH 2/2] net: phy: mv88e6352: Fix miiphy_read/miiphy_write return value checks   Daniel Klauer
• [PATCH 2/2] net: phy: mv88e6352: Fix miiphy_read/miiphy_write return value checks   Daniel Klauer
• [PATCH 0/3] enable menu-driven boot device selection   Masahisa Kojima
• [PATCH 1/3] efi_loader: add menu-driven boot device selection   Masahisa Kojima
• [PATCH 2/3] lib/charset: add u16_strcat() function   Masahisa Kojima
• [PATCH 3/3] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [PATCH 2/3] lib/charset: add u16_strcat() function   Masahisa Kojima
• [PATCH 1/3] efi_loader: add menu-driven boot device selection   Masahisa Kojima
• [PATCH 3/3] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [PATCH] efi_loader: update the timing of enabling and disabling EFI watchdog   Masahisa Kojima
• [PATCH 3/3] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [RFC PATCH v2 0/4] enable menu-driven boot device selection   Masahisa Kojima
• [RFC PATCH v2 1/4] efi_loader: add menu-driven boot device selection   Masahisa Kojima
• [RFC PATCH v2 2/4] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [RFC PATCH v2 3/4] test: unit test for u16_strlcat()   Masahisa Kojima
• [RFC PATCH v2 4/4] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [RFC PATCH v2 0/4] enable menu-driven boot device selection   Masahisa Kojima
• [RESEND RFC PATCH v2 0/4] enable menu-driven boot device selection   Masahisa Kojima
• [RESEND RFC PATCH v2 1/4] efi_loader: add menu-driven boot device selection   Masahisa Kojima
• [RESEND RFC PATCH v2 2/4] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [RESEND RFC PATCH v2 3/4] test: unit test for u16_strlcat()   Masahisa Kojima
• [RESEND RFC PATCH v2 4/4] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [RESEND RFC PATCH v2 1/4] efi_loader: add menu-driven boot device selection   Masahisa Kojima
• [PATCH] arm: sunxi: dram: restore previous value in DRAM   Andrei Lalaev
• [RFC PATCH v1 04/21] test: hush: Test hush variable expansion.   Francis Laniel
• [RFC PATCH v1 16/21] test: hush: Fix variable expansion tests for hush 2021.   Francis Laniel
• [RFC PATCH v1 17/21] cli: hush_2021: Enable using \< and \> as string compare operators.   Francis Laniel
• [RFC PATCH v2 00/21] Modernize U-Boot shell   Francis Laniel
• [RFC PATCH v2 01/21] test: Add framework to test hush behavior   Francis Laniel
• [RFC PATCH v2 02/21] test: hush: Test hush if/else   Francis Laniel
• [RFC PATCH v2 03/21] test/py: hush_if_test: Remove the test file   Francis Laniel
• [RFC PATCH v2 04/21] test: hush: Test hush variable expansion   Francis Laniel
• [RFC PATCH v2 05/21] test: hush: Test hush commands list   Francis Laniel
• [RFC PATCH v2 06/21] test: hush: Test hush loops   Francis Laniel
• [RFC PATCH v2 07/21] cli: Add Busybox upstream hush.c file   Francis Laniel
• [RFC PATCH v2 08/21] cli: Port Busybox 2021 hush to U-Boot   Francis Laniel
• [RFC PATCH v2 09/21] cli: Add choice for hush parser   Francis Laniel
• [RFC PATCH v2 10/21] cli: Add HUSH_2021_PARSER to hush parser choice   Francis Laniel
• [RFC PATCH v2 11/21] cli: Enables using hush 2021 parser as command line parser   Francis Laniel
• [RFC PATCH v2 12/21] cli: hush_2021: Enable variables expansion for hush 2021   Francis Laniel
• [RFC PATCH v2 13/21] cli: hush_2021: Add functions to be called from run_command()   Francis Laniel
• [RFC PATCH v2 14/21] cli: Modify run_command() to add hush 2021 as parser   Francis Laniel
• [RFC PATCH v2 15/21] test: hush: Fix instructions list tests for hush 2021   Francis Laniel
• [RFC PATCH v2 16/21] test: hush: Fix variable expansion tests for hush 2021   Francis Laniel
• [RFC PATCH v2 17/21] cli: hush_2021: Enable using \< and \> as string compare operators   Francis Laniel
• [RFC PATCH v2 18/21] cli: hush_2021: Enable if keyword   Francis Laniel
• [RFC PATCH v2 19/21] test: hush: Fix if tests for hush 2021   Francis Laniel
• [RFC PATCH v2 20/21] cli: hush_2021: Enable loops   Francis Laniel
• [RFC PATCH v2 21/21] test: hush: Fix loop tests for hush 2021   Francis Laniel
• Running qemu tests on RISC-V   Michael Lawnick
• [PULL] u-boot-riscv/master   Leo Liang
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH] riscv: fix build with binutils 2.38   Leo Liang
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH] crypto: aspeed: fix polling RSA status wrong issue   Neal Liu
• [PATCH] crypto: aspeed: fix polling RSA status wrong issue   Neal Liu
• [PATCH v2] crypto: aspeed: fix polling RSA status wrong issue   Neal Liu
• [RESEND PATCH v7 0/1] arm: imx8m: add support for Advantech RSB-3720   Ying-Chun Liu
• [RESEND PATCH v7 1/1] arm: imx8m: add support for Advantech RSB-3720   Ying-Chun Liu
• [PATCH 0/3] add TCB driver for sama5d2   Clément Léger
• [PATCH 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH 2/3] dts: sama5d2: add TCB node   Clément Léger
• [PATCH 3/3] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v2 0/3] add TCB driver for sama5d2   Clément Léger
• [PATCH v2 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v2 2/3] dts: sama5d2: add TCB node   Clément Léger
• [PATCH v2 3/3] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v2 2/3] dts: sama5d2: add TCB node   Clément Léger
• [PATCH v2 2/3] dts: sama5d2: add TCB node   Clément Léger
• [PATCH] arm:dts:k3-am64-sk: EMIF tool update to 0.8.0 with 1333MTs for lpddr4   Sinthu Raja M
• [PATCH] mtd: nand: Add support to dedicated function to set timings   Kory Maincent
• [PATCH 1/3] arm: mmc: Add "ti, am335-sdhci" compatible for TI's omap_hsmmc driver   Lukasz Majewski
• [PATCH 2/3] arm: dts: Add mmc[01] aliases to am33xx.dtsi   Lukasz Majewski
• [PATCH 3/3] arm: dts: Add DTS description for MMC2 am33xx devices   Lukasz Majewski
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Lukasz Majewski
• [PATCH 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver   Lukasz Majewski
• [PATCH 3/3] defconfig: Enable DM_PMIC and DM PMIC_TPS65217 on AM335x EVM board   Lukasz Majewski
• [PATCH] arm: Add AM335x based CBC board   Lukasz Majewski
• [PATCH] tools/mrvl_uart.sh: Remove script   Robert Marko
• [PATCH v2] scripts: setlocalversion: remove quotes around localversion from config   Nikita Maslov
• bzImage under x86_64 UEFI app mode.   Christian Melki
• [PATCH 1/2] usb: dwc3: dwc3-generic: check the parent nodes   Bin Meng
• [PATCH 2/2] usb: dwc3: core: stop the core when it's removed   Bin Meng
• [PATCH] usb: xhci: reset endpoint on USB stall   Bin Meng
• [PATCH v1 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Nishanth Menon
• [PATCH v1 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Nishanth Menon
• [PATCH v1 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Nishanth Menon
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Tommaso Merciai
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Tommaso Merciai
• [PATCH] freescale: imx8mm_evk: Use IS_ENABLED instead of #ifdef   Tommaso Merciai
• Unable to select a different ENV location due env_get_location on zynqmp   Rafał Miłecki
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rafał Miłecki
• [PATCH RFC *RFC*] dt-bindings: add U-Boot chosen for environment data phandle   Rafał Miłecki
• [PATCH V2] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH V2] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH] spi: dw: Fix broken dw_spi_mem_ops()   Damien Le Moal
• [PATCH 0/5] Add ESM driver support for AM64x R5   Hari Nagalla
• [PATCH 0/5] Add ESM driver support for AM64x R5   Nagalla, Hari
• [PATCH v1 0/4] Add ESM driver support for AM64x R5   Hari Nagalla
• [PATCH v1 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Hari Nagalla
• [PATCH v1 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Hari Nagalla
• [PATCH v1 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Hari Nagalla
• [PATCH v1 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Hari Nagalla
• [PATCH 0/5] Add ESM driver support for AM64x R5   Nagalla, Hari
• [PATCH v2 0/4] Add ESM driver support for AM64x R5 SPL/U-boot   Hari Nagalla
• [PATCH v2 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Hari Nagalla
• [PATCH v2 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Hari Nagalla
• [PATCH v2 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Hari Nagalla
• [PATCH v2 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Hari Nagalla
• [PATCH] configs: ti: use standard configuration nodes naming   Romain Naour
• [PATCH 1/4] ARM: omap3_beagle: Remove non-DM initialization   Romain Naour
• [PATCH 2/4] ARM: omap3_beagle: Power on MMC when setting up PMIC   Romain Naour
• [PATCH 3/4] ARM: omap3_beagle: Enable Pinctrl   Romain Naour
• [PATCH 4/4] ARM: omap3_beagle: Enable DM_PMIC and DM_REGULATOR   Romain Naour
• Compile error with SPL_FIT_FULL_CHECK and SPL_LOAD_FIT_FULL enabled   Johann Neuhauser
• Compile error with SPL_FIT_FULL_CHECK and SPL_LOAD_FIT_FULL enabled   Johann Neuhauser
• STM32MP: Can't lock PHK fuses through U-Boot cmd's "stm32key" or "fuse"   Johann Neuhauser
• STM32MP: Can't lock PHK fuses through U-Boot cmd's "stm32key" or "fuse"   Johann Neuhauser
• [PATCH 1/2] stm32mp: bsec: add permanent lock write support   Johann Neuhauser
• [PATCH] cmd/mmc: fix output of mmc info for e-MMC   Markus Niebel
• [PATCH] Makefile: Sort u-boot-initial-env output   Christoph Niedermaier
• [PATCH] scripts/get_default_envs.sh: Remove blank lines   Christoph Niedermaier
• [PATCH] Makefile: Sort u-boot-initial-env output   Christoph Niedermaier
• [PATCH V2] Makefile: Sort u-boot-initial-env output   Christoph Niedermaier
• [PATCH] Makefile: Sort u-boot-initial-env output   Christoph Niedermaier
• [PATCH] [v3] add kaslr-seed generation to extlinux.conf   Zhang Ning
• [PATCH] [v4] cmd: pxe_utils: sysboot: add kaslr-seed generation support   Zhang Ning
• [PATCH] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Hajo Noerenberg
• [EXT] [PATCH] crypto/fsl: Fallback to SW sha1/256 is misaligned buffers   Philip Oberfichtner
• [PATCH 0/2] Add pmic bootcount driver   Philip Oberfichtner
• [PATCH 1/2] power: pfuze100: Add MEMx register definitions   Philip Oberfichtner
• [PATCH 2/2] bootcount: Add pmic pfuze100 bootcount driver   Philip Oberfichtner
• [PATCH 0/2] PHY of_init breakage with non-OF   Vladimir Oltean
• [PATCH 1/2] net: phy: dp83867: avoid error in dp83867_of_init() when PHY has no OF node   Vladimir Oltean
• [PATCH 2/2] net: phy: atheros: avoid error in ar803x_of_init() when PHY has no OF node   Vladimir Oltean
• [PATCH v4 06/11] remoteproc: uclass: Add remoteproc resource handling helpers   Amjad Ouled-Ameur
• [PATCH u-boot-marvell RFC] PLEASE TEST: ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Chris Packham
• [PATCH 1/7] microblaze: exception: move privileged instruction exception out of v5 ifdef   Ovidiu Panait
• [PATCH 2/7] microblaze: exception: migrate MICROBLAZE_V5 to Kconfig   Ovidiu Panait
• [PATCH 3/7] microblaze: exception: fix delay slot exception handling   Ovidiu Panait
• [PATCH 4/7] microblaze: exception: fix return address for delay slot exceptions   Ovidiu Panait
• [PATCH 5/7] microblaze: exception: move unaligned access printfs inside switch case   Ovidiu Panait
• [PATCH 6/7] microblaze: exception: fix unaligned data access register mask   Ovidiu Panait
• [PATCH 7/7] microblaze: exception: drop user exception support   Ovidiu Panait
• [PATCH 7/7] microblaze: exception: drop user exception support   Ovidiu Panait
• [PATCH v2 0/4] QEMU spike machine support for U-Boot   Anup Patel
• [PATCH] image: Control FIT signature verification at runtime   Dhananjay Phadke
• [PATCH] image: Control FIT signature verification at runtime   Dhananjay Phadke
• [EXT] Re: [PATCH] tools/mrvl_uart.sh: Remove script   Kostya Porotchkin
• [PATCH v2 0/5] sunxi: remove lowlevel_init   Andre Przywara
• [PATCH v2 1/5] sunxi: move non-essential code out of s_init()   Andre Przywara
• [PATCH v2 2/5] sunxi: move Cortex SMPEN setting into start.S   Andre Przywara
• [PATCH v2 3/5] sunxi: move early "SRAM setup" into separate file   Andre Przywara
• [PATCH v2 4/5] armv8: remove no longer needed lowlevel_init.S   Andre Przywara
• [PATCH v2 5/5] sunxi-common.h: remove pointless #ifdefs   Andre Przywara
• [PATCH v2 2/5] sunxi: move Cortex SMPEN setting into start.S   Andre Przywara
• Pull request: u-boot-sunxi/master for 2022.04 (part 2)   Andre Przywara
• Pull request: u-boot-sunxi/master for 2022.04 (part 2)   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• [PATCH v1 2/3] mach-sunxi: Add spi boot for SUNIV   Andre Przywara
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Andre Przywara
• [PATCH v1 3/3] mach-sunxi: Enable spi boot for SUNIV   Andre Przywara
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Andre Przywara
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• [PATCH v2 0/6] armv8: fixes and cleanups   Andre Przywara
• [PATCH v2 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH v2 2/6] armv8: Always unmask SErrors   Andre Przywara
• [PATCH v2 3/6] armv8: Force SP_ELx stack pointer usage   Andre Przywara
• [PATCH v2 4/6] arm: Clean up asm/io.h   Andre Przywara
• [PATCH v2 5/6] armv8: Simplify switch_el macro   Andre Przywara
• [PATCH v2 6/6] armv8: Fix and simplify branch_if_master/branch_if_slave   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• [PATCH 7/7] sunxi: H6: Enable SPI0 in DT when no eMMC is used   Andre Przywara
• [u-boot][PATCH] binman: Add support for TEE BL32   Roger Quadros
• [u-boot][PATCH] binman: Add support for TEE BL32   Roger Quadros
• [u-boot][PATCH] binman: Add support for TEE BL32   Roger Quadros
• [u-boot PATCH v2] binman: Add support for TEE BL32   Roger Quadros
• [u-boot PATCH v2] binman: Add support for TEE BL32   Roger Quadros
• Compile error with SPL_FIT_FULL_CHECK and SPL_LOAD_FIT_FULL enabled   Philippe REYNES
• [PATCH] lib: acpi: rename dsdt.c to acpi_write_dsdt.c   Philippe REYNES
• [PATCH] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Philippe REYNES
• [PATCH v3] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Philippe REYNES
• [PATCH] Add ethernet0 alias in Nanopi NEO's device tree   Baltazár Radics
• [PATCH] riscv: fix build with binutils 2.38   Khem Raj
• [PATCH] riscv: fix build with binutils 2.38   Khem Raj
• [PATCH] riscv: fix build with binutils 2.38   Khem Raj
• [PATCH V3 00/16] Add support for J721E SK   Sinthu Raja
• [PATCH V3 01/16] drivers: power: pmic: Add support for tps659412 PMIC   Sinthu Raja
• [PATCH V3 02/16] drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck   Sinthu Raja
• [PATCH V3 03/16] board: ti: j721e: Guard functions with right #ifdef to avoid build warnings   Sinthu Raja
• [PATCH V3 04/16] board: ti: j721e: Enable support for reading EEPROM at next alternate address   Sinthu Raja
• [PATCH V3 05/16] board: ti: j721e: Add support to update board_name for j721e-sk   Sinthu Raja
• [PATCH V3 06/16] board: ti: j721e: Disable probing of daughtercards   Sinthu Raja
• [PATCH V3 07/16] board: ti: j721e: Add support for detecting multiple device trees   Sinthu Raja
• [PATCH V3 08/16] arm: j721e: Add support for selecting DT based on board name   Sinthu Raja
• [PATCH V3 09/16] arm: dts: k3-j721e-r5-common-proc-board: Do not use power-domains for I2C   Sinthu Raja
• [PATCH V3 10/16] arm: dts: k3-j721e-sk: Add initial A72 specific dts support   Sinthu Raja
• [PATCH V3 11/16] arm: dts: k3-j721e-r5-sk: Add initial R5 specific dts support for j721e-sk   Sinthu Raja
• [PATCH V3 12/16] configs: j721e_evm_r5: Enable support for building multiple dtbs into FIT   Sinthu Raja
• [PATCH V3 13/16] configs: j721e_evm_a72: Add SK dtb as part of DTB FIT   Sinthu Raja
• [PATCH V3 14/16] configs: j721e_evm_a72: Align OSPI partitions on erase block boundary   Sinthu Raja
• [PATCH V3 15/16] configs: j721e_evm: Store env in MMC FAT partition   Sinthu Raja
• [PATCH V3 16/16] include: configs: Update env for selecting right dtb   Sinthu Raja
• [PATCH] mtd: nand: Add support to dedicated function to set timings   Miquel Raynal
• Tips on porting a board from older u-boot versions   Jayson Reis
• [PATCH 2/4] imx: imx8mp: disable fused IP for UltraLite   Teresa Remmet
• [PATCH] scripts: dtc: libfdt: fdt_ro.c: always define fdt_check_full   Philippe Reynes
• [PATCH v5 00/16] image: add a stage pre-load   Philippe Reynes
• [PATCH v5 01/16] arch: Kconfig: imply BINMAN for SANDBOX   Philippe Reynes
• [PATCH v5 02/16] lib: Kconfig: enhance help for ASN1   Philippe Reynes
• [PATCH v5 03/16] lib: Kconfig: enhance the help of OID_REGISTRY   Philippe Reynes
• [PATCH v5 04/16] lib: allow to build asn1 decoder and oid registry in SPL   Philippe Reynes
• [PATCH v5 05/16] lib: crypto: allow to build crypyo in SPL   Philippe Reynes
• [PATCH v5 06/16] lib: rsa: allow rsa verify with pkey in SPL   Philippe Reynes
• [PATCH v5 07/16] boot: image: add a stage pre-load   Philippe Reynes
• [PATCH v5 08/16] cmd: bootm: add a stage pre-load   Philippe Reynes
• [PATCH v5 09/16] common: spl: fit_ram: allow to use image pre load   Philippe Reynes
• [PATCH v5 10/16] mkimage: add public key for image pre-load stage   Philippe Reynes
• [PATCH v5 11/16] Makefile: provide sah-key to binman   Philippe Reynes
• [PATCH v5 12/16] tools: binman: add support for pre-load header   Philippe Reynes
• [PATCH v5 13/16] configs: sandbox_defconfig: enable stage pre-load in bootm   Philippe Reynes
• [PATCH v5 14/16] test: py: vboot: add test for global image signature   Philippe Reynes
• [PATCH v5 15/16] cmd: verify: initial import   Philippe Reynes
• [PATCH v5 16/16] configs: sandbox_defconfig: enable config CMD_VERIFY   Philippe Reynes
• [PATCH] drivers: watchdog: wdt-uclass.c: add a property u-boot, noautostart   Philippe Reynes
• [PATCH 1/5] bcm6753: add initial support   Philippe Reynes
• [PATCH 2/5] gpio: bcm6345: allow to use this driver on arm bcm6753   Philippe Reynes
• [PATCH 3/5] nand: brcmnand: add bcm6753 support   Philippe Reynes
• [PATCH 4/5] watchdog: bcm6345: allow to use this driver on arm bcm6753   Philippe Reynes
• [PATCH 5/5] bcm96753ref: add initial support   Philippe Reynes
• [PATCH] lib: acpi: rename dsdt.c to acpi_write_dsdt.c   Philippe Reynes
• [PATCH 1/4] drivers: led: led_bcm6753: initial support   Philippe Reynes
• [PATCH 2/4] arch: arm: dts: bcm6753: add led support   Philippe Reynes
• [PATCH 3/4] arch: arm: dts: bcm96753ref: enable led support   Philippe Reynes
• [PATCH 4/4] configs: bcm96753ref_ram_defconfig: enable led support   Philippe Reynes
• [PATCH] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Philippe Reynes
• [PATCH v3] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Philippe Reynes
• [PATCH v6 00/16] image: add a stage pre-load   Philippe Reynes
• [PATCH v6 01/16] arch: Kconfig: imply BINMAN for SANDBOX   Philippe Reynes
• [PATCH v6 02/16] lib: Kconfig: enhance help for ASN1   Philippe Reynes
• [PATCH v6 03/16] lib: Kconfig: enhance the help of OID_REGISTRY   Philippe Reynes
• [PATCH v6 04/16] lib: allow to build asn1 decoder and oid registry in SPL   Philippe Reynes
• [PATCH v6 05/16] lib: crypto: allow to build crypyo in SPL   Philippe Reynes
• [PATCH v6 06/16] lib: rsa: allow rsa verify with pkey in SPL   Philippe Reynes
• [PATCH v6 07/16] boot: image: add a stage pre-load   Philippe Reynes
• [PATCH v6 08/16] cmd: bootm: add a stage pre-load   Philippe Reynes
• [PATCH v6 09/16] common: spl: fit_ram: allow to use image pre load   Philippe Reynes
• [PATCH v6 10/16] mkimage: add public key for image pre-load stage   Philippe Reynes
• [PATCH v6 11/16] Makefile: provide sah-key to binman   Philippe Reynes
• [PATCH v6 12/16] tools: binman: add support for pre-load header   Philippe Reynes
• [PATCH v6 13/16] configs: sandbox_defconfig: enable stage pre-load in bootm   Philippe Reynes
• [PATCH v6 14/16] test: py: vboot: add test for global image signature   Philippe Reynes
• [PATCH v6 15/16] cmd: verify: initial import   Philippe Reynes
• [PATCH v6 16/16] configs: sandbox_defconfig: enable config CMD_VERIFY   Philippe Reynes
• [PATCH v4] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Philippe Reynes
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• [PATCH] boot: Update default on USE_SPL_FIT_GENERATOR   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• Please pull u-boot-cfi-flash/master   Tom Rini
• i.MX8M Mini Hangs at ATF when booting from USB   Tom Rini
• pull request of u-boot-fsl-qoriq for v2022.04   Tom Rini
• [PATCH] Dockfile, CI: Update to latest focal tag and build   Tom Rini
• [PATCH] sandbox: fix build failure with musl and SDL   Tom Rini
• i.MX8M Mini Hangs at ATF when booting from USB   Tom Rini
• [PATCH v5 3/4] sandbox: Detect the host bit size automatically   Tom Rini
• [RFC 0/2] A/B firmware update based in eMMC boot partition.   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH v5 1/4] scripts/checkpatch.pl: Resync with v5.16   Tom Rini
• [PATCH v5 2/4] efi: Use 16-bit Unicode strings   Tom Rini
• [PATCH v5 4/4] treewide: Use 16-bit unicode strings   Tom Rini
• [PATCH] armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code   Tom Rini
• [PATCH] scripts: Makefile: also clean subdir dtc   Tom Rini
• [PATCH] net: ti: am65-cpsw: Cleanup resources before jump to kernel   Tom Rini
• [PATCH] arm: pdu001: Exend the list of maintained files   Tom Rini
• [PATCH] armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER   Tom Rini
• [PATCH] spl: ymodem: Fix buffer overflow during Image copy   Tom Rini
• [PATCH] Dockerfile: Add libgnutls package for building mkeficapsule command   Tom Rini
• [PATCH] Dockfile, CI: Update to latest focal tag and build   Tom Rini
• Pull request: u-boot-sunxi/master for 2022.04 (part 2)   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Tom Rini
• Pull request for efi-2022-04-rc2   Tom Rini
• Pull request for efi-2022-04-rc2-2   Tom Rini
• [PATCH 1/1] arm: apple: Switch to fully dynamic mem layout   Tom Rini
• Running qemu tests on RISC-V   Tom Rini
• i.MX8M Mini Hangs at ATF when booting from USB   Tom Rini
• [PATCH v1 0/5] Move board specific files to board directory   Tom Rini
• [PATCH] boot: Update default on USE_SPL_FIT_GENERATOR   Tom Rini
• [RFC PATCH v2 00/21] Modernize U-Boot shell   Tom Rini
• [PATCH v4 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Tom Rini
• [PATCH v4 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance   Tom Rini
• [PATCH v4 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems   Tom Rini
• [PATCH v4 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple DDR subsystems   Tom Rini
• [PATCH v4 05/20] arm: K3: Add basic support for J721S2 SoC definition   Tom Rini
• [PATCH v4 06/20] drivers: dma: Add support for J721S2   Tom Rini
• [PATCH v4 07/20] clk: clk-k3: Add support for J721S2 SoC   Tom Rini
• [PATCH v4 08/20] power: domain: ti: Add support for J721S2 SoC   Tom Rini
• [PATCH v4 09/20] ram: k3-ddrss: Add support for J721S2 SoC   Tom Rini
• [PATCH v4 10/20] soc: ti: k3-socinfo: Add entry for J721S2 SoC   Tom Rini
• [PATCH v4 11/20] board: ti: j721s2: Add board support for J721S2   Tom Rini
• [PATCH v4 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC   Tom Rini
• [PATCH v4 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2   Tom Rini
• [PATCH v4 14/20] arm: dts: Add initial support for J721S2 SoC   Tom Rini
• [PATCH v4 15/20] arm: dts: Add initial support for J721S2 System on Module   Tom Rini
• [PATCH v4 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board   Tom Rini
• [PATCH v4 17/20] arm: dts: k3-j721s2: Add r5 specific dt support   Tom Rini
• [PATCH v4 18/20] arm: dts: k3-j721s2-ddr: Add DDR support   Tom Rini
• [PATCH v4 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig   Tom Rini
• [PATCH v4 20/20] configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig   Tom Rini
• [PATCH] soc: soc_ti_k3: update j721e revision numbering   Tom Rini
• [PATCH v4 01/11] configs: dra7xx_evm: Increase the size of SPL_MULTI_DTB_FIT   Tom Rini
• [PATCH v4 02/11] reset: dra7: Add a reset driver   Tom Rini
• [PATCH v4 03/11] arm: mach-omap2: load/start remoteproc IPU1/IPU2   Tom Rini
• [PATCH v4 04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Tom Rini
• [PATCH v4 05/11] linux: bitmap.h: Add find_next_zero_area function   Tom Rini
• [PATCH v4 06/11] remoteproc: uclass: Add remoteproc resource handling helpers   Tom Rini
• [PATCH v4 07/11] remoteproc: ipu: Add driver to bring up ipu   Tom Rini
• [PATCH v4 08/11] dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes   Tom Rini
• [PATCH v4 09/11] arm: dts: dra7: Add ipu and related nodes   Tom Rini
• [PATCH v4 10/11] arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes   Tom Rini
• [PATCH v4 11/11] dts: am57xx*: Add ipu early boot DT changes   Tom Rini
• [PATCH v2 01/25] phy: cadence: sierra: Fix for USB3 U1/U2 state   Tom Rini
• [PATCH v2 02/25] phy: cadence: Sierra: Fix PHY power_on sequence   Tom Rini
• [PATCH v2 03/25] phy: cadence: Sierra: Create PHY only for "phy" or "link" sub-nodes   Tom Rini
• [PATCH v2 04/25] phy: cadence: Sierra: Move all clk_get_*() to a separate function   Tom Rini
• [PATCH v2 05/25] phy: cadence: Sierra: Move all reset_control_get*() to a separate function   Tom Rini
• [PATCH v2 06/25] phy: cadence: Sierra: Add array of input clocks in "struct cdns_sierra_phy"   Tom Rini
• [PATCH v2 07/25] phy: cadence: Sierra: Add missing clk_disable_unprepare() in .remove callback   Tom Rini
• [PATCH v2 08/25] phy: cadence: Sierra: Add a UCLASS_PHY device for links   Tom Rini
• [PATCH v2 09/25] phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as a clock   Tom Rini
• [PATCH v2 10/25] phy: ti: phy-j721e-wiz.c: Fix the condition for setting P_ENABLE_FORCE   Tom Rini
• [PATCH v2 11/25] board: ti: j721e: evm.c: Add support for probing SerDes0   Tom Rini
• [PATCH v2 12/25] arm: dts: k3-j721e: Add support for PLL_CMNLC clocks in SerDes0   Tom Rini
• [PATCH v2 13/25] phy: cadence: Sierra: Prepare driver to add support for multilink configurations   Tom Rini
• [PATCH v2 14/25] dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode   Tom Rini
• [PATCH v2 15/25] phy: cadence: Sierra: Add support to get SSC type from device tree.   Tom Rini
• [PATCH v2 16/25] phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation   Tom Rini
• [PATCH v2 17/25] phy: cadence: Sierra: Add PHY PCS common register configurations   Tom Rini
• [PATCH v2 18/25] phy: cadence: Sierra: Check cmn_ready assertion during PHY power on   Tom Rini
• [PATCH v2 19/25] phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation   Tom Rini
• [PATCH v2 20/25] phy: cadence: Sierra: Update single link PCIe register configuration   Tom Rini
• [PATCH v2 21/25] phy: cadence: Sierra: Add support for PHY multilink configurations   Tom Rini
• [PATCH v2 22/25] phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration   Tom Rini
• [PATCH v2 23/25] phy: cadence: Sierra: Add support for skipping configuration   Tom Rini
• [PATCH v2 24/25] arm: dts: k3-j721e: Add support for multilink PCIe + QSGMII   Tom Rini
• [PATCH v2 25/25] include: configs: j721e_evm: Add support to boot ethfw core in j721e   Tom Rini
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Tom Rini
• [PATCH] boot: Update default on USE_SPL_FIT_GENERATOR   Tom Rini
• [RFC] CI: enforce packages upgrade for Msys2 on Windows   Tom Rini
• [PATCH] arm:dts:k3-am64-sk: EMIF tool update to 0.8.0 with 1333MTs for lpddr4   Tom Rini
• [PATCH v3 07/18] pxe: Move pxe_utils files   Tom Rini
• [PATCH v5 13/13] test: Add some tests for kconfig.h   Tom Rini
• [PATCH v5 01/13] imx: Don't define __ASSEMBLY__ in source files   Tom Rini
• [PATCH v5 02/13] mips: Avoid using config_enabled() directly   Tom Rini
• [PATCH v5 03/13] mmc: fsl: Use brackets around if()   Tom Rini
• [PATCH v5 04/13] kconfig: Update IS_ENABLED() internals   Tom Rini
• [PATCH v5 05/13] kconfig: Add support for conditional values   Tom Rini
• [PATCH v5 06/13] bloblist: Update to use conditional value   Tom Rini
• [PATCH v5 07/13] patman: Update test_util to run doc tests   Tom Rini
• [PATCH v5 08/13] buildman: Add a flag to control the traceback   Tom Rini
• [PATCH v5 09/13] buildman: Make use of test_util   Tom Rini
• [PATCH v5 10/13] buildman: Add helper functions for updating .config files   Tom Rini
• [PATCH v5 11/13] buildman: Provide a hint on how to debug thread crashes   Tom Rini
• [PATCH v5 12/13] buildman: Allow adjusting board config on the fly   Tom Rini
• [PATCH 1/3] ide: Drop CONFIG_IDE_AHB   Tom Rini
• [PATCH 2/3] Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig   Tom Rini
• [PATCH 3/3] Drop CONFIG_SYS_PIO_MODE   Tom Rini
• [PATCH] Convert CONFIG_REMAKE_ELF to Kconfig   Tom Rini
• [PATCH 1/8] sata: Drop Silicon Image SIL3114 SATA driver   Tom Rini
• [PATCH 2/8] sata: Only support BLK   Tom Rini
• [PATCH 3/8] sata: Rearrange Kconfig for SATA   Tom Rini
• [PATCH 4/8] sata: sata_sil: Only support BLK   Tom Rini
• [PATCH 5/8] ahci: Make ahci drivers depend on AHCI   Tom Rini
• [PATCH 6/8] scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE   Tom Rini
• [PATCH 7/8] Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig   Tom Rini
• [PATCH 8/8] dm: scsi: Add a migration deadline for scsi   Tom Rini
• Running qemu tests on RISC-V   Tom Rini
• [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [PATCH v3 5/5] test/py: Add tests for the erofs   Tom Rini
• [PATCH v3 0/5] fs/erofs: new filesystem   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v3 07/18] pxe: Move pxe_utils files   Tom Rini
• Please pull u-boot-dm (take 3)   Tom Rini
• Please pull u-boot-dm (take 3)   Tom Rini
• Please pull u-boot-dm (take 3)   Tom Rini
• [PATCH] Replace echo -n's used in environment processing with touch   Tom Rini
• [PULL] u-boot-riscv/master   Tom Rini
• [PATCH] arm:dts:k3-am64-sk: EMIF tool update to 0.8.0 with 1333MTs for lpddr4   Tom Rini
• [PATCH v2 1/9] nvme: Split out PCI support   Tom Rini
• [PATCH v2 2/9] mailbox: apple: Add driver for Apple IOP mailbox   Tom Rini
• [PATCH v2 3/9] arm: apple: Change SoC name from "m1" into "apple"   Tom Rini
• [PATCH v2 4/9] arm: apple: Add RTKit support   Tom Rini
• [PATCH v2 5/9] nvme: Introduce driver ops   Tom Rini
• [PATCH v2 6/9] nvme: Add shutdown function   Tom Rini
• [PATCH v2 7/9] power: domain: apple: Add reset support   Tom Rini
• [PATCH v2 8/9] nvme: apple: Add driver for Apple NVMe storage controller   Tom Rini
• [PATCH v2 9/9] configs: apple: Add NVMe boot target   Tom Rini
• [PATCH v2 1/2] spi: apple: Add driver for Apple SPI controller   Tom Rini
• [PATCH v2 2/2] input: apple: Add support for Apple SPI keyboard   Tom Rini
• [PATCH 1/2] powerpc: mpc8xx: drop CONFIG_SYS_RESET_ADDRESS   Tom Rini
• [PATCH 2/2] common: drop CONFIG_SYS_RESET_ADDR   Tom Rini
• [PATCH v2] apple: Fix debug uart clock rate   Tom Rini
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Tom Rini
• [PATCH v3 07/18] pxe: Move pxe_utils files   Tom Rini
• [PATCH v3 07/18] pxe: Move pxe_utils files   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH] test/py: Add test case for mkimage -o argument   Tom Rini
• [PATCH V3 1/2] fw_env: make flash_io() take buffer as an argument   Tom Rini
• [PATCH V3 2/2] fw_env: simplify logic & code paths in the fw_env_open()   Tom Rini
• [PATCH V4] phy: nop-phy: Enable reset-gpios support   Tom Rini
• [PATCH 1/1] test: test field truncation in snprint()   Tom Rini
• [PATCH] acpi: Move acpi_write_tables() to a generic header   Tom Rini
• [PATCH v2 1/5] DFU: Do not copy the entity name over the buffer size   Tom Rini
• [PATCH v2 2/5] DFU: Accept redundant spaces and tabs in dfu_alt_info   Tom Rini
• [PATCH v2 3/5] DFU: Check the number of arguments and argument string strictly   Tom Rini
• [PATCH v2 4/5] doc: usage: DFU: Fix dfu_alt_info document   Tom Rini
• [PATCH v2 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB   Tom Rini
• [PATCH] [v4] cmd: pxe_utils: sysboot: add kaslr-seed generation support   Tom Rini
• [PATCH] button: adc: set state to pressed when the voltage is closest to nominal   Tom Rini
• [PATCH] common: fdt_support: add support for "partitions" subnode to fdt_fixup_mtdparts()   Tom Rini
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Tom Rini
• [PATCH 1/1] cmd: wrong printf() code in do_test_stackprot_fail()   Tom Rini
• [PATCH] Replace echo -n's used in environment processing with touch   Tom Rini
• [PATCH v2] mkimage: Improve documentation of algo-name parameter   Tom Rini
• [PATCH v3 07/18] pxe: Move pxe_utils files   Tom Rini
• [PATCH v3 07/18] pxe: Move pxe_utils files   Tom Rini
• [PATCH] spl: add %z support for tiny-printf   Tom Rini
• [PATCH v2] pstore: Support already existing reserved-memory node   Tom Rini
• [PATCH v2] scripts: setlocalversion: remove quotes around localversion from config   Tom Rini
• [PATCH] arm: pdu001: Fix dt to work with the current am33xx dtsi files   Tom Rini
• [ANN] U-Boot v2022.04-rc2 released   Tom Rini
• [PATCH] arm: am33xx: Fix early debug UART initialization   Tom Rini
• [PATCH] arm: am33xx: Fix early debug UART initialization   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH] arm: pdu001: Fix early debugging UART   Tom Rini
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Tom Rini
• [PATCH v1 2/9] clk: nuvoton: Add support for NPCM845   Tom Rini
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Tom Rini
• [PATCH] fdtdec.h: Remove gurads around fdtdec_resetup function   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH 1/2] arm: dts: k3-j721e-sk: EMIF tool update to 0.6.1 with 4266MTs for lpddr4   Tom Rini
• [PATCH 2/2] arm: dts: k3-j721e-r5-sk: Update R5 DT to pick the new DDR config   Tom Rini
• [PATCH V3 01/16] drivers: power: pmic: Add support for tps659412 PMIC   Tom Rini
• [PATCH V3 02/16] drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck   Tom Rini
• [PATCH V3 03/16] board: ti: j721e: Guard functions with right #ifdef to avoid build warnings   Tom Rini
• [PATCH V3 04/16] board: ti: j721e: Enable support for reading EEPROM at next alternate address   Tom Rini
• [PATCH V3 05/16] board: ti: j721e: Add support to update board_name for j721e-sk   Tom Rini
• [PATCH V3 06/16] board: ti: j721e: Disable probing of daughtercards   Tom Rini
• [PATCH V3 07/16] board: ti: j721e: Add support for detecting multiple device trees   Tom Rini
• [PATCH V3 08/16] arm: j721e: Add support for selecting DT based on board name   Tom Rini
• [PATCH V3 09/16] arm: dts: k3-j721e-r5-common-proc-board: Do not use power-domains for I2C   Tom Rini
• [PATCH V3 10/16] arm: dts: k3-j721e-sk: Add initial A72 specific dts support   Tom Rini
• [PATCH V3 11/16] arm: dts: k3-j721e-r5-sk: Add initial R5 specific dts support for j721e-sk   Tom Rini
• [PATCH V3 12/16] configs: j721e_evm_r5: Enable support for building multiple dtbs into FIT   Tom Rini
• [PATCH V3 13/16] configs: j721e_evm_a72: Add SK dtb as part of DTB FIT   Tom Rini
• [PATCH V3 14/16] configs: j721e_evm_a72: Align OSPI partitions on erase block boundary   Tom Rini
• [PATCH V3 15/16] configs: j721e_evm: Store env in MMC FAT partition   Tom Rini
• [PATCH V3 16/16] include: configs: Update env for selecting right dtb   Tom Rini
• [PATCH v3 1/1] env: fat: Allow overriding interface, device and partition   Tom Rini
• [PATCH v3 1/1] env: fat: Allow overriding interface, device and partition   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Tom Rini
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Tom Rini
• Single-document documentation format   Tom Rini
• Which board to select for "Rasbperry Pi 4B"   Tom Rini
• Boot from specified partition (or FS) UUID without knowing Device ID   Tom Rini
• [RFC PATCH v2 00/21] Modernize U-Boot shell   Tom Rini
• [PATCH] board: stemmy: Detect board variants and patch DTB   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20220220   Tom Rini
• [PATCH] arm: pdu001: Setup pinmux for console UART as early as possible   Tom Rini
• [PATCH] arm: pdu001: Setup pinmux for console UART as early as possible   Tom Rini
• [GIT PULL] xilinx patches for v2022.04-rc3   Tom Rini
• [PATCH] arm: apple: Add M1 Pro/Max support   Tom Rini
• [PATCH 1/1] iommu: Add M1 Pro/Max support to Apple DART driver   Tom Rini
• [PATCH] arm: dts: k3-j721e-r5-common-proc-board: tps659413: Correct the min/max voltages of VDD_CPU   Tom Rini
• [PATCH 1/2] arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO   Tom Rini
• [PATCH 2/2] arm: omap3: Make some memory functions static and clean headers   Tom Rini
• [PATCH] arm: dts: k3-j7200: Fix up MAIN R5FSS cluster mode back to Split-mode   Tom Rini
• [PATCH v2 1/2] arm: apple: Disable debug UART   Tom Rini
• [PATCH v2 2/2] doc: board: apple: Update Apple M1 documentation   Tom Rini
• [PATCH v2] crypto: aspeed: fix polling RSA status wrong issue   Tom Rini
• [PATCH] ti: i2c: fix probe_chip() return value   Tom Rini
• [PATCH 1/4] powerpc: Remove unused MPC8540/60ADS code   Tom Rini
• [PATCH 2/4] Convert CONFIG_BTB to Kconfig   Tom Rini
• [PATCH 3/4] arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG   Tom Rini
• [PATCH 4/4] Convert CONFIG_BOARD_COMMON to Kconfig   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH 1/9] Convert CONFIG_BIOSEMU to Kconfig   Tom Rini
• [PATCH 2/9] Convert CONFIG_BOARD_ECC_SUPPORT to Kconfig   Tom Rini
• [PATCH 3/9] Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig   Tom Rini
• [PATCH 4/9] Convert CONFIG_BOOTFILE to Kconfig   Tom Rini
• [PATCH 5/9] powerpc: P1010RDB: Move CONFIG_BOOTMODE out of CONFIG namespace   Tom Rini
• [PATCH 6/9] Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig   Tom Rini
• [PATCH 7/9] net: Remove CONFIG_BOOTP_DHCP_REQUEST_DELAY   Tom Rini
• [PATCH 8/9] Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to Kconfig   Tom Rini
• [PATCH 9/9] Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig   Tom Rini
• [GIT PULL] clock changes for v2022.04-rc2   Tom Rini
• [PATCH v3] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Tom Rini
• [PATCH v4] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Tom Rini
• [PATCH] tools: pblimage: fix image header verification function   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• Pull request for efi-2022-04-rc3   Tom Rini
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Tom Rini
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Tom Rini
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Tom Rini
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Tom Rini
• [PATCH] tools: mkimage/dumpimage: Allow to use -l with -T   Tom Rini
• [PATCH] arm: pdu001: Fix early debugging UART   Tom Rini
• [PATCH v3 1/1] arm: apple: Switch to fully dynamic mem layout   Tom Rini
• [PATCH v2] board: stemmy: Detect board variants and patch DTB   Tom Rini
• [PATCH] arm: pdu001: Setup pinmux for console UART as early as possible   Tom Rini
• [PATCH 1/8] sata: Drop Silicon Image SIL3114 SATA driver   Stefan Roese
• [PATCH 2/8] sata: Only support BLK   Stefan Roese
• [PATCH 3/8] sata: Rearrange Kconfig for SATA   Stefan Roese
• [PATCH 4/8] sata: sata_sil: Only support BLK   Stefan Roese
• [PATCH 5/8] ahci: Make ahci drivers depend on AHCI   Stefan Roese
• [PATCH 6/8] scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE   Stefan Roese
• [PATCH 7/8] Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig   Stefan Roese
• [PATCH 8/8] dm: scsi: Add a migration deadline for scsi   Stefan Roese
• [PATCH] mtd: cfi_mtd: populate mtd->dev with flash_info->dev   Stefan Roese
• [PATCH] mtd: cfi_mtd: populate mtd->dev with flash_info->dev   Stefan Roese
• Please pull u-boot-cfi-flash/master   Stefan Roese
• [PATCH] tools/mrvl_uart.sh: Remove script   Stefan Roese
• [PATCH] tools: kwboot: Fix detection of quit esc sequence   Stefan Roese
• [PATCH] MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers   Stefan Roese
• [RESEND PATCH] arm: kirkwood: Dockstar : Add DM Ethernet   Stefan Roese
• [PATCH] arm: kirkwood: iConnect : Add Ethernet support   Stefan Roese
• [PATCH] tools/mrvl_uart.sh: Remove script   Stefan Roese
• [PATCH] tools: kwboot: Allow to use -b without image path as the last getopt() option   Stefan Roese
• [PATCH] U-Boot ENV in EXT4 support for Espressobin   Stefan Roese
• [PATCH] arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model   Stefan Roese
• [PATCH] arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH] arm: kirkwood: iConnect : Add Ethernet support   Stefan Roese
• [PATCH] tools: kwboot: Fix detection of quit esc sequence   Stefan Roese
• [PATCH] MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers   Stefan Roese
• [RESEND PATCH] arm: kirkwood: Dockstar : Add DM Ethernet   Stefan Roese
• [PATCH] tools: kwboot: Allow to use -b without image path as the last getopt() option   Stefan Roese
• [PATCH] arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver Model   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH u-boot-marvell 1/4] arm: a37xx: pci: Use standard register macros from pci.h   Stefan Roese
• [PATCH u-boot-marvell 2/4] arm: a37xx: pci: Cleanup macro names   Stefan Roese
• [PATCH u-boot-marvell 3/4] arm: a37xx: pci: Use dev_read_addr()   Stefan Roese
• [PATCH u-boot-marvell 4/4] arm: a37xx: pci: Ensure that root port is always on root zero bus   Stefan Roese
• [PATCH u-boot-marvell 1/9] rtc: ds1307: Add bindings for microchip,mcp7940x   Stefan Roese
• [PATCH u-boot-marvell 2/9] phy: marvell: a3700: Update compatible string to official DT bindings   Stefan Roese
• [PATCH u-boot-marvell 3/9] usb: ehci: ehci-marvell: Update compatible string to official DT bindings   Stefan Roese
• [PATCH u-boot-marvell 4/9] watchdog: armada_37xx: Convert to official DT bindings   Stefan Roese
• [PATCH u-boot-marvell 5/9] arm: mvebu: turris_mox: Remove hardcoded ethernet node names   Stefan Roese
• [PATCH u-boot-marvell 6/9] arm: a37xx: Update sdhci pointers to official DT bindings   Stefan Roese
• [PATCH u-boot-marvell 7/9] arm: a37xx: espressobin: Move U-Boot specific partitions node to -u-boot.dtsi   Stefan Roese
• [PATCH u-boot-marvell 8/9] arm: a37xx: espressobin: Explicitly enable eMMC node in -u-boot.dtsi   Stefan Roese
• [PATCH u-boot-marvell 9/9] arm: a37xx: Update DTS files to version from upstream Linux kernel   Stefan Roese
• [PATCH] tools: kwbimage: Fix dumping DATA registers for v0 images   Stefan Roese
• [PATCH u-boot-mvebu 1/3] arm: mvebu: a37xx: Fix calling build_mem_map()   Stefan Roese
• [PATCH u-boot-marvell RFC] PLEASE TEST: ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Stefan Roese
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Stefan Roese
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Stefan Roese
• [PATCH u-boot-mvebu 3/3] arm: mvebu: a37xx: Fix comment with name of the function   Stefan Roese
• [PATCH u-boot-marvell 1/3] arm: a37xx: pci: Do not try to access other buses when link is down   Stefan Roese
• [PATCH u-boot-marvell 2/3] arm: a37xx: pci: Register controller also when no PCIe card is connected   Stefan Roese
• [PATCH u-boot-marvell 3/3] arm: a37xx: pci: Update comment about Command/Direct mode   Stefan Roese
• [PATCH u-boot-marvell] pci: mvebu: Ensure that root port is always on root zero bus   Stefan Roese
• [PATCH u-boot-marvell 1/7] tools: kwbimage: Define structures for extended kwbimage v0 headers   Stefan Roese
• [PATCH u-boot-marvell 2/7] tools: kwbimage: Fix calculating size of kwbimage v0 header   Stefan Roese
• [PATCH u-boot-marvell 3/7] tools: kwbimage: Add support for dumping extended and binary v0 headers   Stefan Roese
• [PATCH u-boot-marvell 4/7] tools: kwbimage: Do not show mkimage error message in dumpimage   Stefan Roese
• [PATCH u-boot-marvell 5/7] tools: kwbimage: Add support for NAND_BLKSZ and NAND_BADBLK_LOCATION for v0 images   Stefan Roese
• [PATCH u-boot-marvell 6/7] tools: kwbimage: Fix help how to extract DDR3 training code   Stefan Roese
• [PATCH u-boot-marvell 7/7] tools: kwbimage: Add me as an author of kwbimage   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: Do not define or overwrite vectors in SPL build   Stefan Roese
• [PATCH u-boot-mvebu v2 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Stefan Roese
• [PATCH u-boot-marvell RFC] PLEASE TEST: ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Stefan Roese
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell 2/2] arm: mvebu: turris_omnia: Reset the board immediately on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell 0/7] tools: kwbimage: Support for parsing extended v0 format   Stefan Roese
• [PATCH u-boot-marvell v2 3/7] tools: kwbimage: Add support for dumping extended and binary v0 headers   Stefan Roese
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell v2 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell v2 2/2] arm: mvebu: turris_omnia: Reset the board immediately on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell 1/4] arm: a37xx: pci: Use standard register macros from pci.h   Stefan Roese
• [PATCH u-boot-marvell 2/4] arm: a37xx: pci: Cleanup macro names   Stefan Roese
• [PATCH u-boot-marvell 3/4] arm: a37xx: pci: Use dev_read_addr()   Stefan Roese
• [PATCH u-boot-marvell 4/4] arm: a37xx: pci: Ensure that root port is always on root zero bus   Stefan Roese
• [PATCH] tools: kwbimage: Fix dumping DATA registers for v0 images   Stefan Roese
• [PATCH u-boot-marvell 0/9] arm: a37xx: Fix code and update DTS files to upstream version   Stefan Roese
• [PATCH u-boot-mvebu v2 0/3] arm: mvebu: a37xx: Fix and extend building memory map   Stefan Roese
• [PATCH u-boot-marvell] pci: mvebu: Ensure that root port is always on root zero bus   Stefan Roese
• [PATCH u-boot-marvell] ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision   Stefan Roese
• [PATCH u-boot-marvell v2 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell v2 2/2] arm: mvebu: turris_omnia: Reset the board immediately on DDR training failure   Stefan Roese
• [PATCH u-boot-marvell v2 0/7] tools: kwbimage: Support for parsing extended v0 format   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH u-boot-mvebu v2 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value   Stefan Roese
• [PATCH u-boot-mvebu v2 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards   Stefan Roese
• [PATCH u-boot-mvebu v2 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu   Stefan Roese
• [PATCH u-boot-mvebu v2 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Stefan Roese
• [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Stefan Roese
• [PATCH] tools: kwboot: Fix quitting terminal   Stefan Roese
• [PATCH 1/2] pci: pci_mvebu: Remove unused SELECT and lane_mask   Stefan Roese
• [PATCH 2/2] pci: pci_mvebu: Cleanup macro names   Stefan Roese
• [PATCH 1/2] sandbox: video: Replace PCI_CLASS_* macros by one from pci_ids.h   Stefan Roese
• [PATCH 2/2] pci: Remove duplicate PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* macros   Stefan Roese
• [PATCH] pci: Add defines for normal and subtractive PCI bridges   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Enable ext4 write support in defconfig   Stefan Roese
• [PATCH] tools: kwboot: Fix detection of quit esc sequence   Pali Rohár
• [PATCH] tools/mrvl_uart.sh: Remove script   Pali Rohár
• [PATCH] MAINTAINERS: Update list of Armada 385 and Armada 3720 drivers   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Pali Rohár
• [PATCH] malloc_simple: Remove usage of unsupported %zx format string   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• [PATCH] tools/mrvl_uart.sh: Remove script   Pali Rohár
• [PATCH] tools/mrvl_uart.sh: Remove script   Pali Rohár
• [PATCH] tools/mrvl_uart.sh: Remove script   Pali Rohár
• Marvell Avanta UART booting   Pali Rohár
• Marvell Avanta UART booting   Pali Rohár
• [PATCH] tools/mrvl_uart.sh: Remove script   Pali Rohár
• [PATCH] tools: kwboot: Allow to use -b without image path as the last getopt() option   Pali Rohár
• [PATCH] U-Boot ENV in EXT4 support for Espressobin   Pali Rohár
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Pali Rohár
• [PATCH] U-Boot ENV in EXT4 support for Espressobin   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_KEYBOARD   Pali Rohár
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Pali Rohár
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Pali Rohár
• [PATCH u-boot-marvell 1/4] arm: a37xx: pci: Use standard register macros from pci.h   Pali Rohár
• [PATCH u-boot-marvell 2/4] arm: a37xx: pci: Cleanup macro names   Pali Rohár
• [PATCH u-boot-marvell 3/4] arm: a37xx: pci: Use dev_read_addr()   Pali Rohár
• [PATCH u-boot-marvell 4/4] arm: a37xx: pci: Ensure that root port is always on root zero bus   Pali Rohár
• [PATCH] tools: kwbimage: Fix dumping DATA registers for v0 images   Pali Rohár
• [PATCH] tools: mkimage/dumpimage: Allow to use -l with -T   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• [PATCH u-boot-marvell 0/9] arm: a37xx: Fix code and update DTS files to upstream version   Pali Rohár
• [PATCH u-boot-marvell 1/9] rtc: ds1307: Add bindings for microchip, mcp7940x   Pali Rohár
• [PATCH u-boot-marvell 2/9] phy: marvell: a3700: Update compatible string to official DT bindings   Pali Rohár
• [PATCH u-boot-marvell 3/9] usb: ehci: ehci-marvell: Update compatible string to official DT bindings   Pali Rohár
• [PATCH u-boot-marvell 4/9] watchdog: armada_37xx: Convert to official DT bindings   Pali Rohár
• [PATCH u-boot-marvell 5/9] arm: mvebu: turris_mox: Remove hardcoded ethernet node names   Pali Rohár
• [PATCH u-boot-marvell 6/9] arm: a37xx: Update sdhci pointers to official DT bindings   Pali Rohár
• [PATCH u-boot-marvell 7/9] arm: a37xx: espressobin: Move U-Boot specific partitions node to -u-boot.dtsi   Pali Rohár
• [PATCH u-boot-marvell 8/9] arm: a37xx: espressobin: Explicitly enable eMMC node in -u-boot.dtsi   Pali Rohár
• [PATCH u-boot-marvell 9/9] arm: a37xx: Update DTS files to version from upstream Linux kernel   Pali Rohár
• [PATCH v4 2/2] arm: mvebu: add Globalscale MOCHAbin support   Pali Rohár
• [PATCH u-boot-mvebu 0/3] arm: mvebu: a37xx: Fix and extend building memory map   Pali Rohár
• [PATCH u-boot-mvebu 1/3] arm: mvebu: a37xx: Fix calling build_mem_map()   Pali Rohár
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Pali Rohár
• [PATCH u-boot-mvebu 3/3] arm: mvebu: a37xx: Fix comment with name of the function   Pali Rohár
• [PATCH u-boot-marvell 6/9] arm: a37xx: Update sdhci pointers to official DT bindings   Pali Rohár
• [PATCH u-boot-marvell 1/3] arm: a37xx: pci: Do not try to access other buses when link is down   Pali Rohár
• [PATCH u-boot-marvell 2/3] arm: a37xx: pci: Register controller also when no PCIe card is connected   Pali Rohár
• [PATCH u-boot-marvell 3/3] arm: a37xx: pci: Update comment about Command/Direct mode   Pali Rohár
• [PATCH u-boot-marvell] pci: mvebu: Ensure that root port is always on root zero bus   Pali Rohár
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Pali Rohár
• [PATCH u-boot-marvell 0/7] tools: kwbimage: Support for parsing extended v0 format   Pali Rohár
• [PATCH u-boot-marvell 1/7] tools: kwbimage: Define structures for extended kwbimage v0 headers   Pali Rohár
• [PATCH u-boot-marvell 2/7] tools: kwbimage: Fix calculating size of kwbimage v0 header   Pali Rohár
• [PATCH u-boot-marvell 3/7] tools: kwbimage: Add support for dumping extended and binary v0 headers   Pali Rohár
• [PATCH u-boot-marvell 4/7] tools: kwbimage: Do not show mkimage error message in dumpimage   Pali Rohár
• [PATCH u-boot-marvell 5/7] tools: kwbimage: Add support for NAND_BLKSZ and NAND_BADBLK_LOCATION for v0 images   Pali Rohár
• [PATCH u-boot-marvell 6/7] tools: kwbimage: Fix help how to extract DDR3 training code   Pali Rohár
• [PATCH u-boot-marvell 7/7] tools: kwbimage: Add me as an author of kwbimage   Pali Rohár
• [PATCH u-boot-marvell] arm: mvebu: Do not define or overwrite vectors in SPL build   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Pali Rohár
• kwboot: Marvell Dove UART booting   Pali Rohár
• [PATCH u-boot-mvebu 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Pali Rohár
• [PATCH u-boot-marvell] arm: mvebu: Do not define or overwrite vectors in SPL build   Pali Rohár
• [PATCH u-boot-mvebu v2 0/3] arm: mvebu: a37xx: Fix and extend building memory map   Pali Rohár
• [PATCH u-boot-mvebu v2 1/3] arm: mvebu: a37xx: Fix calling build_mem_map()   Pali Rohár
• [PATCH u-boot-mvebu v2 2/3] arm: mvebu: a37xx: Map CCI-400 and AP BootROM address space   Pali Rohár
• [PATCH u-boot-mvebu v2 3/3] arm: mvebu: a37xx: Fix comment with name of the function   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH u-boot-marvell 0/7] tools: kwbimage: Support for parsing extended v0 format   Pali Rohár
• [PATCH u-boot-mvebu 0/5] arm: mvebu: a37xx: Add support for reading OTP   Pali Rohár
• [PATCH u-boot-mvebu 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value   Pali Rohár
• [PATCH u-boot-mvebu 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards   Pali Rohár
• [PATCH u-boot-mvebu 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu   Pali Rohár
• [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Pali Rohár
• [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Pali Rohár
• [PATCH u-boot-marvell v2 0/7] tools: kwbimage: Support for parsing extended v0 format   Pali Rohár
• [PATCH u-boot-marvell v2 1/7] tools: kwbimage: Define structures for extended kwbimage v0 headers   Pali Rohár
• [PATCH u-boot-marvell v2 2/7] tools: kwbimage: Fix calculating size of kwbimage v0 header   Pali Rohár
• [PATCH u-boot-marvell v2 3/7] tools: kwbimage: Add support for dumping extended and binary v0 headers   Pali Rohár
• [PATCH u-boot-marvell v2 4/7] tools: kwbimage: Do not show mkimage error message in dumpimage   Pali Rohár
• [PATCH u-boot-marvell v2 5/7] tools: kwbimage: Add support for NAND_BLKSZ and NAND_BADBLK_LOCATION for v0 images   Pali Rohár
• [PATCH u-boot-marvell v2 6/7] tools: kwbimage: Fix help how to extract DDR3 training code   Pali Rohár
• [PATCH u-boot-marvell v2 7/7] tools: kwbimage: Add me as an author of kwbimage   Pali Rohár
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Pali Rohár
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Pali Rohár
• [PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH u-boot-marvell v2 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure   Pali Rohár
• [PATCH u-boot-marvell v2 2/2] arm: mvebu: turris_omnia: Reset the board immediately on DDR training failure   Pali Rohár
• [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Pali Rohár
• [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Pali Rohár
• [PATCH u-boot-mvebu v2 0/5] arm: mvebu: a37xx: Add support for reading OTP   Pali Rohár
• [PATCH u-boot-mvebu v2 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value   Pali Rohár
• [PATCH u-boot-mvebu v2 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards   Pali Rohár
• [PATCH u-boot-mvebu v2 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu   Pali Rohár
• [PATCH u-boot-mvebu v2 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Pali Rohár
• [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Pali Rohár
• [PATCH] tools: kwboot: Fix quitting terminal   Pali Rohár
• [PATCH 1/2] pci: pci_mvebu: Remove unused SELECT and lane_mask   Pali Rohár
• [PATCH 2/2] pci: pci_mvebu: Cleanup macro names   Pali Rohár
• [PATCH 1/2] sandbox: video: Replace PCI_CLASS_* macros by one from pci_ids.h   Pali Rohár
• [PATCH 2/2] pci: Remove duplicate PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* macros   Pali Rohár
• [PATCH] pci: Add defines for normal and subtractive PCI bridges   Pali Rohár
• [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Pali Rohár
• [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Pali Rohár
• [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP   Pali Rohár
• [PATCH u-boot-mvebu v3 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value   Pali Rohár
• [PATCH u-boot-mvebu v3 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards   Pali Rohár
• [PATCH u-boot-mvebu v3 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu   Pali Rohár
• [PATCH u-boot-mvebu v3 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code   Pali Rohár
• [PATCH u-boot-mvebu v3 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values   Pali Rohár
• [PATCH u-boot-mvebu] watchdog: armada_37xx: Probe driver also when watchdog is already running   Pali Rohár
• [PATCH] console: Implement flush() function   Pali Rohár
• [PATCH] tools: pblimage: fix image header verification function   Pali Rohár
• [PATCH 1/2] Fix Espressobin build for configs where ENV is not in SPI   Pali Rohár
• [PATCH 2/2] Add SCSI scan for ENV in EXT4 or FAT   Pali Rohár
• [PATCH u-boot-marvell] arm64: a37xx: pinctrl: Fix PWM pins indexes   Pali Rohár
• Unable to select a different ENV location due env_get_location on zynqmp   Ricardo Salveti
• Unable to select a different ENV location due env_get_location on zynqmp   Ricardo Salveti
• [PATCH 0/3] save prev bootloader data, when u-boot chainloaded   Dzmitry Sankouski
• [PATCH 1/3 v3] arm: init: save previous bootloader data   Dzmitry Sankouski
• [PATCH 2/3 v3] board: starqltechn: get board usable - add bootcmd and docs   Dzmitry Sankouski
• [PATCH 3/3 v2] board: axy17lte: get board usable - add bootcmd and docs   Dzmitry Sankouski
• [PATCH 0/3] save prev bootloader data, when u-boot chainloaded   Dzmitry Sankouski
• [PATCH 1/3 v3] arm: init: save previous bootloader data   Dzmitry Sankouski
• [PATCH 2/3 v4] board: starqltechn: get board usable - add bootcmd and docs   Dzmitry Sankouski
• [PATCH 3/3 v2] board: axy17lte: get board usable - add bootcmd and docs   Dzmitry Sankouski
• [PATCH] common: fdt_support: add support for "partitions" subnode to fdt_fixup_mtdparts()   Matthias Schiffer
• [PATCH] serial: remove nulldev_serial_input   Heiko Schocher
• [PATCH] serial-uclass: fix build warning   Heiko Schocher
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Heiko Schocher
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Heiko Schocher
• [PATCH] ti: i2c: fix probe_chip() return value   Heiko Schocher
• bind/unbind command not working for usb_ether   Heiko Schocher
• [PATCH] gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander   Heiko Schocher
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Frieder Schrempf
• Re: [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Heinrich Schuchardt
• [PATCH] sandbox: fix build failure with musl and SDL   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Heinrich Schuchardt
• [PATCH v5 3/4] sandbox: Detect the host bit size automatically   Heinrich Schuchardt
• [PATCH v5 4/4] treewide: Use 16-bit unicode strings   Heinrich Schuchardt
• [PATCH 1/1] cmd: wrong printf() code in do_test_stackprot_fail()   Heinrich Schuchardt
• [PATCH] efi_loader: use %zu not %zd to print efi_uintn_t   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: use %zu to print efi_uintn_t in FMP driver   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: add handle for UART   Heinrich Schuchardt
• [PATCH 2/2] mkeficapsule: Support "--flags reset" option   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: merge FDT and RISC-V tests   Heinrich Schuchardt
• [PATCH v2 1/3] efi: Add debugging to efi_set_bootdev()   Heinrich Schuchardt
• [PATCH v2 2/3] efi: Use device_get_uclass_id() where appropriate   Heinrich Schuchardt
• [PATCH v2 3/3] efi: Drop unnecessary calls to blk_find_device()   Heinrich Schuchardt
• [PATCH 08/19] dm: add event notification   Heinrich Schuchardt
• [PATCH 17/19] efi_loader: disk: use udevice instead of blk_desc   Heinrich Schuchardt
• [PATCH v10 4/9] doc: update UEFI document for usage of mkeficapsule   Heinrich Schuchardt
• [PATCH 09/19] dm: add tag support   Heinrich Schuchardt
• [PATCH 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• Pull request for efi-2022-04-rc2   Heinrich Schuchardt
• Pull request for efi-2022-04-rc2   Heinrich Schuchardt
• [PATCH 1/1] tools: mkeficapsule: dont use malloc.h   Heinrich Schuchardt
• Pull request for efi-2022-04-rc2   Heinrich Schuchardt
• [PATCH v10 6/9] tools: mkeficapsule: allow for specifying GUID explicitly   Heinrich Schuchardt
• Pull request for efi-2022-04-rc2-2   Heinrich Schuchardt
• [PATCH v2 3/4] riscv: qemu: Implement is_flash_available() for MTD NOR   Heinrich Schuchardt
• [RFC PATCH v2 00/21] Modernize U-Boot shell   Heinrich Schuchardt
• Running qemu tests on RISC-V   Heinrich Schuchardt
• Running qemu tests on RISC-V   Heinrich Schuchardt
• Running qemu tests on RISC-V   Heinrich Schuchardt
• [PATCH v2 1/1] sandbox: fix build failure with musl and SDL   Heinrich Schuchardt
• Running qemu tests on RISC-V   Heinrich Schuchardt
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   Heinrich Schuchardt
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• Device Tree Overlays and FIT Images - Are they supported together fully?   Heinrich Schuchardt
• [RFC] CI: enforce packages upgrade for Msys2 on Windows   Heinrich Schuchardt
• [PATCH v2 1/1] cmd: add serial console support for the cls command   Heinrich Schuchardt
• Pull request for efi-2022-04-rc2-3   Heinrich Schuchardt
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   Heinrich Schuchardt
• [PATCH v11 5/9] test/py: efi_capsule: add image authentication test   Heinrich Schuchardt
• Pull request for efi-2022-04-rc2-4   Heinrich Schuchardt
• [PATCH] arm: apple: Disable debug UART   Heinrich Schuchardt
• [PATCH v4 1/2] efi_loader: use efi_update_capsule_firmware() for capsule on disk   Heinrich Schuchardt
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Heinrich Schuchardt
• [PATCH 3/3] efi_loader: add menu-driven UEFI Boot Variable maintenance   Heinrich Schuchardt
• [PATCH 1/3] efi_loader: add menu-driven boot device selection   Heinrich Schuchardt
• [PATCH 2/3] lib/charset: add u16_strcat() function   Heinrich Schuchardt
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Heinrich Schuchardt
• [RFC PATCH] efi_loader: fix uefi secure boot with intermediate certs   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [BUG] clean target deletes lib/acpi/dsdt.c   Heinrich Schuchardt
• [PATCH v11 5/9] test/py: efi_capsule: add image authentication test   Heinrich Schuchardt
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH 1/1] doc: describe generation of SMBIOS table   Heinrich Schuchardt
• [PATCH 1/1] doc: describe generation of SMBIOS table   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [PATCH] lib: acpi: rename dsdt.c to acpi_write_dsdt.c   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• Boot from specified partition (or FS) UUID without knowing Device ID   Heinrich Schuchardt
• Which board to select for "Rasbperry Pi 4B"   Heinrich Schuchardt
• Single-document documentation format   Heinrich Schuchardt
• [PATCH 1/1] doc: describe fatload command   Heinrich Schuchardt
• [PATCH 1/1] tools: mkefitools: remove duplicate test   Heinrich Schuchardt
• Re: Boot from specified partition (or FS) UUID without knowing Device ID   Heinrich Schuchardt
• [PATCH] tools: mkeficapsule: remove duplicated code   Heinrich Schuchardt
• [RFC PATCH] efi_loader: fix uefi secure boot with intermediate certs   Heinrich Schuchardt
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   Heinrich Schuchardt
• [PATCH] efi_loader: update the timing of enabling and disabling EFI watchdog   Heinrich Schuchardt
• [PATCH] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix display of NVMe EUI-64   Heinrich Schuchardt
• [RFC PATCH v2 0/4] enable menu-driven boot device selection   Heinrich Schuchardt
• [PATCH 10/10] cmd: rng: Add support for selecting RNG device   Heinrich Schuchardt
• [PATCH 09/10] qemu: arm: Remove platform specific function to get RNG device   Heinrich Schuchardt
• [PATCH 01/10] tpm: Move tpm-utils header under the include directory   Heinrich Schuchardt
• [PATCH 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Heinrich Schuchardt
• [PATCH 08/10] tpm: Add the RNG child device   Heinrich Schuchardt
• [PATCH 03/10] tpm: Fix the return type of tpm_startup   Heinrich Schuchardt
• [PATCH 04/10] tpm: Move the TPM version detection functions to the uclass driver   Heinrich Schuchardt
• [PATCH 02/10] tpm: rng: Change tpm_get_random to return an int   Heinrich Schuchardt
• [PATCH 08/10] tpm: Add the RNG child device   Heinrich Schuchardt
• [RESEND RFC PATCH v2 1/4] efi_loader: add menu-driven boot device selection   Heinrich Schuchardt
• [PATCH v3] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Heinrich Schuchardt
• [PATCH v2 1/1] doc: describe generation of SMBIOS table   Heinrich Schuchardt
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Heinrich Schuchardt
• Pull request for efi-2022-04-rc3   Heinrich Schuchardt
• dm driver probe and dm question   Heinrich Schuchardt
• [PATCH 0/2] efi_loader: use short-form DP for load options   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: support booting via short-form device-path   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: use short-form DP for load options   Heinrich Schuchardt
• [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Heinrich Schuchardt
• dm driver probe and dm question   Heinrich Schuchardt
• [PATCH] efi_loader: Ignore DT when ACPI is on   Heinrich Schuchardt
• [PATCH 0/4] Add support for QEMU's ramfb display   Heinrich Schuchardt
• Re: [PATCH v5 3/4] test/py: Handle expected reboot while booting sandbox   Heinrich Schuchardt
• Question on running uboot_testpy with tbot   Harald Seiler
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [PATCH] video: Add missing dependency for DM_GPIO   Michal Simek
• [PATCH] xilinx: Remove GPIO_EXTRA_HEADER selection   Michal Simek
• [PATCHv2] arm64: zynqmp: Print the secure boot status information   Michal Simek
• [PATCHv2] arm64: zynqmp: Print the secure boot status information   Michal Simek
• [PATCH v2] zynqmp: Use the same style for macro definitions   Michal Simek
• [PATCH 0/4] Zynq qspi updates   Michal Simek
• [PATCH v3] power: zynqmp: Add power domain driver for ZynqMP   Michal Simek
• [PATCH v2] power: zynqmp: Add power domain driver for ZynqMP   Michal Simek
• [PATCH v2 1/2] phy: zynqmp: Add support for sata and DP phy initialization   Michal Simek
• [PATCH v2 2/2] scsi: ceva: Enable PHY and reset support   Michal Simek
• [PATCH] arm64: zynqmp: Remove SOM *u-boot.dtsi   Michal Simek
• [PATCH 1/2] lmb: Fix lmb property's defination under struct lmb   Michal Simek
• [PATCH 2/2] zynqmp: Run board_get_usable_ram_top() only on main U-Boot   Michal Simek
• [PATCH v2 1/3] lmb: Fix lmb property's defination under struct lmb   Michal Simek
• [PATCH v2 2/3] zynqmp: Run board_get_usable_ram_top() only on main U-Boot   Michal Simek
• [PATCH v2 3/3] arm64: zynqmp: Disable LMB for mini configurations   Michal Simek
• [PATCH 1/2] lmb: Fix lmb property's defination under struct lmb   Michal Simek
• [PATCH v4 07/11] FWU: Add boot time checks as highlighted by the FWU specification   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 00/11] FWU: Add support for FWU Multi Bank Update feature   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [PATCH v4 01/11] FWU: Add FWU metadata structure and driver for accessing metadata   Michal Simek
• [ANN] U-Boot v2022.04-rc1 released   Michal Simek
• Unable to select a different ENV location due env_get_location on zynqmp   Michal Simek
• [PATCH] arm64: zynqmp: Remove additional gpio header from dlc21   Michal Simek
• [PATCH] tools/zynqmp_pm_cfg_obj_convert.py: fix build with Vivado 2021.x   Michal Simek
• [PATCH v3] power: zynqmp: Add power domain driver for ZynqMP   Michal Simek
• [PATCH v2 1/2] phy: zynqmp: Add support for sata and DP phy initialization   Michal Simek
• [PATCH] video: Add missing dependency for DM_GPIO   Michal Simek
• [PATCH] xilinx: Remove GPIO_EXTRA_HEADER selection   Michal Simek
• [PATCH 7/7] microblaze: exception: drop user exception support   Michal Simek
• Unable to select a different ENV location due env_get_location on zynqmp   Michal Simek
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Michal Simek
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Michal Simek
• Unable to select a different ENV location due env_get_location on zynqmp   Michal Simek
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Michal Simek
• [PATCH] dt-bindings: nvmem: add U-Boot environment variables binding   Michal Simek
• Unable to select a different ENV location due env_get_location on zynqmp   Michal Simek
• [PATCH 0/5] xilinx: Fix issues in v2022.04-rc1/2   Michal Simek
• [PATCH 1/5] xilinx: Enable OF_BOARD for zynq and zynqmp boards   Michal Simek
• [PATCH 2/5] arm64: zynqmp: Build psu_spl_init for SPL all the time   Michal Simek
• [PATCH 3/5] arm64: zynqmp: Fix dependencies around ZYNQMP_PSU_INIT_ENABLED   Michal Simek
• [PATCH 4/5] ARM: zynq: Fix debug uart initialization   Michal Simek
• [PATCH 5/5] arm64: zynqmp: Fix debug uart initialization   Michal Simek
• [PATCH 0/5] xilinx: Fix issues in v2022.04-rc1/2   Michal Simek
• [PATCH] arm64: zynqmp: Remove additional gpio header from dlc21   Michal Simek
• [GIT PULL] xilinx patches for v2022.04-rc3   Michal Simek
• [GIT PULL] xilinx patches for v2022.04-rc3   Michal Simek
• [PATCH 0/4] xilinx: Fru tool update   Michal Simek
• [PATCH 1/4] fru: ops: Clear fru table before storing data   Michal Simek
• [PATCH 2/4] fru: ops: Return error from checksum if data is all zero's   Michal Simek
• [PATCH 3/4] xilinx: common: Optimise updating ethaddr from eeprom   Michal Simek
• [PATCH 4/4] fru: ops: Add support to read mac addresses from multirecord   Michal Simek
• [PATCH] Revert "board: zynqmp: Fix for wrong AMS setting by ROM"   Michal Simek
• [PATCH] dm: pinctrl: Use explicit values for enums   Michal Simek
• [PATCH 0/2] nand: zynq: Sync up with Linux   Michal Simek
• [PATCH 1/2] mtd: nand: Update driver to match new DT binding   Michal Simek
• [PATCH 2/2] ARM: dts: zynq: add NAND flash controller node   Michal Simek
• [PATCH 0/3] mmc: zynqmp_sdhci: Driver fixes   Michal Simek
• [PATCH 1/3] mmc: zynq_sdhci: Fix timeout issue   Michal Simek
• [PATCH 2/3] mmc: zynq_sdhci: Change granularity of timeout to 1us   Michal Simek
• [PATCH 3/3] mmc: zynq_sdhci: Enable card detect workaround for ZynqMP   Michal Simek
• [PATCH 1/2] pinctrl: Increase length of pinmux status buffer   Michal Simek
• [PATCH 2/2] pinctrl: zynqmp: Add pinctrl driver   Michal Simek
• [PATCH 0/4] mmc: zynq_sdhci: Add support for dynamic IP configuration   Michal Simek
• [PATCH 1/4] firmware: zynqmp: Add and update firmware enums   Michal Simek
• [PATCH 2/4] firmware: zynqmp: Add support for set sd config and is function supported   Michal Simek
• [PATCH 3/4] lib: div64: Add support for round up of div64_u64   Michal Simek
• [PATCH 4/4] mmc: zynq_sdhci: Add support for dynamic configuration   Michal Simek
• [PATCH 0/3] net: phy: Add support for ethernet-phy-id   Michal Simek
• [PATCH 1/3] net: phy: Add new read ethernet phy id function   Michal Simek
• [PATCH 2/3] net: phy: Remove static return type for phy_device_create()   Michal Simek
• [PATCH 3/3] net: phy: Add support for ethernet-phy-id with gpio reset   Michal Simek
• [PATCH 0/2] xilinx: video: add skeleton drivers for zynqmp DP   Michal Simek
• [PATCH 1/2] video: Add skeleton driver for ZynqMP Display port driver   Michal Simek
• [PATCH 2/2] dma: xilinx: Add Display Port DMA driver   Michal Simek
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH] usb: dwc3: Add support to reset usb ULPI phy   Michal Simek
• [PATCH 0/6] arm64: zynqmp: Update SOM boards   Michal Simek
• [PATCH 1/6] arm64: zynqmp: Move usb hub from i2c to usb node   Michal Simek
• [PATCH 2/6] arm64: zynqmp: Setup clock for DP and DPDMA   Michal Simek
• [PATCH 3/6] arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM   Michal Simek
• [PATCH 4/6] arm64: zynqmp: Switch to ethernet-phy-id in kv260   Michal Simek
• [PATCH 5/6] arm64: zynqmp: Enable DP driver for SOMs   Michal Simek
• [PATCH 6/6] arm64: zynqmp: Fix level of gpio reset for usb on kv260 boards   Michal Simek
• [PATCH] gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander   Michal Simek
• [PATCH 1/1] cmd: pwm: fix typo 'eisable' -> 'disable'   Michal Simek
• [PATCH] gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander   Michal Simek
• [PATCH] arm64: zynqmp: Add resets property to sdhci nodes   Michal Simek
• [PATCH] firmware: zynqmp: Do not bind PD driver in SPL if disabled   Michal Simek
• [RFC PATCH] mtd: spi-nor-core: Set dummy buswidth equal to data buswidth   Ashok Reddy Soma
• hi   Neuber Sousa
• [PATCH] U-Boot ENV in EXT4 support for Espressobin   Rogier Stam
• [PATCH] U-Boot ENV in EXT4 support for Espressobin   Rogier Stam
• [PATCH 0/2] U-Boot ENV in EXT4 support for Expressobin (revised)   Rogier Stam
• [PATCH 1/2] Fix Espressobin build for configs where ENV is not in SPI   Rogier Stam
• [PATCH 2/2] Add SCSI scan for ENV in EXT4 or FAT   Rogier Stam
• [PATCH] sandbox: fix build failure with musl and SDL   Milan P. Stanić
• [PATCH v1 2/9] clk: nuvoton: Add support for NPCM845   Stanley
• [PATCH] ram: aspeed: Rework kconfig options   Joel Stanley
• [PATCH v4] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
• [PATCH v5] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
• [PATCH v4 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Oleksandr Suvorov
• [PATCH 1/1] cmd: pwm: fix typo 'eisable' -> 'disable'   Sébastien Szymanski
• [PATCH] rpi: always set fdt_addr to the correct value   Marek Szyprowski
• [PATCH] rpi: always set fdt_addr to the correct value   Marek Szyprowski
• [PATCH v10 0/9] efi_loader: capsule: improve capsule authentication support   AKASHI Takahiro
• [PATCH v10 1/9] tools: build mkeficapsule with tools-only_defconfig   AKASHI Takahiro
• [PATCH v10 2/9] tools: mkeficapsule: add firmware image signing   AKASHI Takahiro
• [PATCH v10 3/9] tools: mkeficapsule: add man page   AKASHI Takahiro
• [PATCH v10 4/9] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v10 5/9] test/py: efi_capsule: add image authentication test   AKASHI Takahiro
• [PATCH v10 6/9] tools: mkeficapsule: allow for specifying GUID explicitly   AKASHI Takahiro
• [PATCH v10 7/9] test/py: efi_capsule: align with the syntax change of mkeficapsule   AKASHI Takahiro
• [PATCH v10 8/9] test/py: efi_capsule: add a test for "--guid" option   AKASHI Takahiro
• [PATCH v10 9/9] test/py: efi_capsule: check the results in case of CAPSULE_AUTHENTICATE   AKASHI Takahiro
• [PATCH] Dockerfile: Add libgnutls package for building mkeficapsule command   AKASHI Takahiro
• [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk   AKASHI Takahiro
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   AKASHI Takahiro
• [PATCH v2 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   AKASHI Takahiro
• [PATCH 00/19] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH 01/19] scsi: call device_probe() after scanning   AKASHI Takahiro
• [PATCH 02/19] usb: storage: call device_probe() after scanning   AKASHI Takahiro
• [PATCH 03/19] mmc: call device_probe() after scanning   AKASHI Takahiro
• [PATCH 04/19] nvme: call device_probe() after scanning   AKASHI Takahiro
• [PATCH 05/19] sata: call device_probe() after scanning   AKASHI Takahiro
• [PATCH 06/19] block: ide: call device_probe() after scanning   AKASHI Takahiro
• [PATCH 07/19] virtio: call device_probe() in scanning   AKASHI Takahiro
• [PATCH 08/19] dm: add event notification   AKASHI Takahiro
• [PATCH 09/19] dm: add tag support   AKASHI Takahiro
• [PATCH 10/19] dm: tag: add some document   AKASHI Takahiro
• [PATCH 11/19] test: dm: add tests for tag support   AKASHI Takahiro
• [PATCH 12/19] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH 13/19] dm: blk: add a device-probe hook for scanning disk partitions   AKASHI Takahiro
• [PATCH 14/19] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH 15/19] efi_loader: disk: a helper function to delete efi_disk objects   AKASHI Takahiro
• [PATCH 16/19] dm: disk: add read/write interfaces with udevice   AKASHI Takahiro
• [PATCH 17/19] efi_loader: disk: use udevice instead of blk_desc   AKASHI Takahiro
• [PATCH 18/19] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH 19/19] efi_driver: align with efi_disk-dm integration   AKASHI Takahiro
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   AKASHI Takahiro
• [PATCH v2 2/2] efi_loader: Reset system after CapsuleUpdate on disk   AKASHI Takahiro
• [PATCH v10 6/9] tools: mkeficapsule: allow for specifying GUID explicitly   AKASHI Takahiro
• [PATCH v10 4/9] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v4 10/11] mkeficapsule: Add support for generating empty capsules   AKASHI Takahiro
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   AKASHI Takahiro
• [RFC] CI: enforce packages upgrade for Msys2 on Windows   AKASHI Takahiro
• [PATCH v11 0/9] efi_loader: capsule: improve capsule authentication support   AKASHI Takahiro
• [PATCH v11 1/9] tools: build mkeficapsule with tools-only_defconfig   AKASHI Takahiro
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   AKASHI Takahiro
• [PATCH v11 3/9] tools: mkeficapsule: add man page   AKASHI Takahiro
• [PATCH v11 4/9] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v11 5/9] test/py: efi_capsule: add image authentication test   AKASHI Takahiro
• [PATCH v11 6/9] tools: mkeficapsule: allow for specifying GUID explicitly   AKASHI Takahiro
• [PATCH v11 7/9] test/py: efi_capsule: align with the syntax change of mkeficapsule   AKASHI Takahiro
• [PATCH v11 8/9] test/py: efi_capsule: add a test for "--guid" option   AKASHI Takahiro
• [PATCH v11 9/9] test/py: efi_capsule: check the results in case of CAPSULE_AUTHENTICATE   AKASHI Takahiro
• [PATCH v4 10/11] mkeficapsule: Add support for generating empty capsules   AKASHI Takahiro
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [PATCH 03/19] mmc: call device_probe() after scanning   AKASHI Takahiro
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   AKASHI Takahiro
• [RFC PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [RFC PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   AKASHI Takahiro
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   AKASHI Takahiro
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [RFC PATCH 1/2] efi_loader: fix dual signed image certification   AKASHI Takahiro
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v2 01/20] scsi: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v2 02/20] usb: storage: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v2 03/20] mmc: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v2 04/20] nvme: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v2 05/20] sata: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v2 06/20] block: ide: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v2 07/20] virtio: call device_probe() in scanning   AKASHI Takahiro
• [PATCH v2 08/20] dm: add event notification   AKASHI Takahiro
• [PATCH v2 09/20] dm: add tag support   AKASHI Takahiro
• [PATCH v2 10/20] dm: tag: add some document   AKASHI Takahiro
• [PATCH v2 11/20] test: dm: add tests for tag support   AKASHI Takahiro
• [PATCH v2 12/20] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH v2 13/20] dm: blk: add a device-probe hook for scanning disk partitions   AKASHI Takahiro
• [PATCH v2 14/20] efi_loader: split efi_init_obj_list() into two stages   AKASHI Takahiro
• [PATCH v2 15/20] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH v2 16/20] efi_loader: disk: a helper function to delete efi_disk objects   AKASHI Takahiro
• [PATCH v2 17/20] dm: disk: add read/write interfaces with udevice   AKASHI Takahiro
• [PATCH v2 18/20] efi_loader: disk: use udevice instead of blk_desc   AKASHI Takahiro
• [PATCH v2 19/20] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH v2 20/20] efi_driver: align with efi_disk-dm integration   AKASHI Takahiro
• [PATCH v11 5/9] test/py: efi_capsule: add image authentication test   AKASHI Takahiro
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   AKASHI Takahiro
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   AKASHI Takahiro
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• [PATCH] tools: mkeficapsule: remove duplicated code   AKASHI Takahiro
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [PATCH 2/2] test/py: efi_secboot: adjust secure boot tests to code changes   AKASHI Takahiro
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH 1/1] tools: mkefitools: remove duplicate test   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• Boot from specified partition (or FS) UUID without knowing Device ID   AKASHI Takahiro
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   AKASHI Takahiro
• [PATCH v1 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Jesse Taube
• [PATCH v2 1/1] timer: npcm: Add driver for Nuvoton NPCM SoCs   Jesse Taube
• [PATCH v1 0/3] Add spi boot to SPL on SUNIV   Jesse Taube
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Jesse Taube
• [PATCH v1 2/3] mach-sunxi: Add spi boot for SUNIV   Jesse Taube
• [PATCH v1 3/3] mach-sunxi: Enable spi boot for SUNIV   Jesse Taube
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Jesse Taube
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Jesse Taube
• [PATCH v1 1/3] mach-sunxi: Add boot device detection for SUNIV   Jesse Taube
• [PATCH v2 0/3] Add SPI boot to SPL on SUNIV/F1C100s   Jesse Taube
• [PATCH v2 1/3] mach-sunxi: Add boot device detection for SUNIV/F1C100s   Jesse Taube
• [PATCH v2 2/3] mach-sunxi: Add SPL SPI boot for SUNIV   Jesse Taube
• [PATCH v2 3/3] mach-sunxi: Enable SPI boot for SUNIV and licheepi nano   Jesse Taube
• [PATCH v2 1/3] mach-sunxi: Add boot device detection for SUNIV/F1C100s   Jesse Taube
• [PATCH 2/7] sunxi: Kconfig: Fix up SPI configuration   Jagan Teki
• [PATCH 2/7] sunxi: Kconfig: Fix up SPI configuration   Jagan Teki
• [PATCH 7/7] sunxi: H6: Enable SPI0 in DT when no eMMC is used   Jagan Teki
• [PATCH] spi: cadence-qspi: Make reset control optinal   Jagan Teki
• [PATCH] spi: dw: Fix broken dw_spi_mem_ops()   Jagan Teki
• [PATCH v12] driver: spi: add bcm iproc qspi support   Jagan Teki
• commit leads to failure while writing env to sdcard (MMC1) on my imx8mq board   Heiko Thiery
• commit leads to failure while writing env to sdcard (MMC1) on my imx8mq board   Heiko Thiery
• [PATCH] kontron-sl-mx8mm: change kernel_addr_r and scriptaddr   Heiko Thiery
• [PATCH] kontron-sl-mx8mm: change kernel_addr_r and scriptaddr   Heiko Thiery
• [PATCH] kontron-sl-mx8mm: change environment address variables   Heiko Thiery
• [PATCH v2] kontron-sl-mx8mm: change environment address variables   Heiko Thiery
• [PATCH] kontron-pitx-imx8m: change environment address variables   Heiko Thiery
• [PATCH] kontron-pitx-imx8m: fix board_mmc_getcd()   Heiko Thiery
• [PATCH] include: configs: *imx8*: remove IMX_FEC_BASE   Heiko Thiery
• [PATCH] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Heiko Thiery
• [PATCH] imx8mn-*-evk: rename mkimage config   Heiko Thiery
• [PATCH v2] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Heiko Thiery
• [PATCH v2] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Heiko Thiery
• [PATCH v3] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Heiko Thiery
• [PATCH 1/2] ARM: imx: imx8mn-*-evk: use reset-gpios in phy node   Heiko Thiery
• [PATCH 2/2] ARM: imx: imx8mn-*-evk: add qca, disable-smarteee phy node   Heiko Thiery
• [PATCH 1/2] ARM: imx: imx8mn-evk: generate a single bootable flash.bin   Heiko Thiery
• [PATCH 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards   Heiko Thiery
• [PATCH] ARM: imx: imx8mn-evk: change environment address variables   Heiko Thiery
• [PATCH 1/2] ARM: imx: imx8mn-evk: generate a single bootable flash.bin   Heiko Thiery
• [PATCH 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards   Heiko Thiery
• [PATCH v2] ARM: imx: imx8mn-evk: change environment address variables   Heiko Thiery
• [PATCH v3] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Heiko Thiery
• [PATCH 0/2] enable DM_SERIAL on imx8mn-evk and imx8mn-ddr4-evk   Heiko Thiery
• [PATCH 1/2] ARM: imx: imx8mn-evk: enable DM_SERIAL   Heiko Thiery
• [PATCH 2/2] ARM: imx: imx8mn-ddr4-evk: enable DM_SERIAL   Heiko Thiery
• [PATCH 0/2] enable DM_SERIAL on imx8mn-evk and imx8mn-ddr4-evk   Heiko Thiery
• [PATCH v2 1/2] ARM: imx: imx8mn-evk: enable DM_SERIAL   Heiko Thiery
• [PATCH v2 2/2] ARM: imx: imx8mn-ddr4-evk: enable DM_SERIAL   Heiko Thiery
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• Problem IMX8MN booting legacy kernel and mipi display   Michael Nazzareno Trimarchi
• Problem IMX8MN booting legacy kernel and mipi display   Michael Nazzareno Trimarchi
• Problem IMX8MN booting legacy kernel and mipi display   Michael Nazzareno Trimarchi
• Problem IMX8MN booting legacy kernel and mipi display   Michael Nazzareno Trimarchi
• Problem IMX8MN booting legacy kernel and mipi display   Michael Nazzareno Trimarchi
• [PATCH v3 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Michael Nazzareno Trimarchi
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Marek Vasut
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Marek Vasut
• i.MX8M Mini Hangs at ATF when booting from USB   Marek Vasut
• i.MX8M Mini Hangs at ATF when booting from USB   Marek Vasut
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Marek Vasut
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Marek Vasut
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Marek Vasut
• [PATCH v2] console: usb: kbd: Limit poll frequency to improve performance   Marek Vasut
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Marek Vasut
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Marek Vasut
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Marek Vasut
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] dm: core: Check flags before removing devices   Marek Vasut
• [PATCH] Revert "mmc: fsl_esdhc_imx: add wait_dat0() support"   Marek Vasut
• [PATCH 1/3] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Marek Vasut
• [PATCH 2/3] mmc: fsl_esdhc_imx: remove redundant ARCH_MXC   Marek Vasut
• [PATCH 3/3] mmc: fsl_esdhc_imx: correct the actual card clock   Marek Vasut
• [PATCH 1/2] ARM: imx: imx8mn-ddr4-evk: Fix boot from SD card   Marek Vasut
• [PATCH 2/2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PATCH] usb: ehci-omap: Drop dead code   Marek Vasut
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Marek Vasut
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Marek Vasut
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Marek Vasut
• [PATCH v2] imx8m: clock_imx8mq: Add the ecspi clocks   Marek Vasut
• [PATCH] cmd: eeprom: Do not rewrite EEPROM I2C bus with DM I2C enabled   Marek Vasut
• [PATCH] usb: xhci: reset endpoint on USB stall   Marek Vasut
• [PATCH 1/2] usb: dwc3: dwc3-generic: check the parent nodes   Marek Vasut
• [PATCH 2/2] usb: dwc3: core: stop the core when it's removed   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PATCH 2/2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PATCH 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Marek Vasut
• [PATCH] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   Marek Vasut
• [PATCH] arm: socfpga: vining: Fix mtdparts for 2x256 MiB SF variant   Marek Vasut
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PATCH] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Marek Vasut
• [PATCH v2 1/2] ram: stm32mp1: Unconditionally enable ASR   Marek Vasut
• [PATCH v2 2/2] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Marek Vasut
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Marek Vasut
• [PATCH v2] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Marek Vasut
• [PATCH 5/7] usb: ehci-omap: Use PHY system to manage phy resets   Marek Vasut
• [PATCH 0/7] Migrate omap_ehci to use phy driver   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH] usb: dwc3: Add support to reset usb ULPI phy   Marek Vasut
• [PATCH v3] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Marek Vasut
• [PATCH 1/2] ARM: imx: imx8mn-*-evk: use reset-gpios in phy node   Marek Vasut
• [PATCH 2/2] ARM: imx: imx8mn-*-evk: add qca, disable-smarteee phy node   Marek Vasut
• [PATCH 1/2] ARM: imx: imx8mn-evk: generate a single bootable flash.bin   Marek Vasut
• [PATCH 1/2] ARM: imx: imx8mn-evk: generate a single bootable flash.bin   Marek Vasut
• IMX8MM 4GiB boundary issue   Marek Vasut
• IMX8MM 4GiB boundary issue   Marek Vasut
• [PATCH v2 1/2] ram: stm32mp1: Unconditionally enable ASR   Marek Vasut
• [PATCH v3 1/2] ram: stm32mp1: Unconditionally enable ASR   Marek Vasut
• [PATCH v3 2/2] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Marek Vasut
• [PATCH 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Marek Vasut
• IMX8MM 4GiB boundary issue   Marek Vasut
• [PATCH V2 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Marek Vasut
• [PATCH V2 1/2] net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string   Marek Vasut
• [PATCH] pmic: pca9450: Add PCA9450C compatible string   Marek Vasut
• [PATCH 1/2] ARM: imx: imx8m: Add 933 MHz PLL settings   Marek Vasut
• [PATCH 2/2] imx8m: ddrphy_utils: Add 3732 MT/s mode   Marek Vasut
• IMX8MM 4GiB boundary issue   Marek Vasut
• ARM: socfpga: gen5: release reset before using USB as device with ums   Marek Vasut
• ARM: socfpga: gen5: release reset before using USB as device with ums   Marek Vasut
• [PATCH] led: led_pwm: Add a driver for LEDs connected to PWM   Ivan Vozvakhov
• [PATCH v4] sf: Query write-protection status before operating the flash   Michael Walle
• [PATCH v4] sf: Query write-protection status before operating the flash   Michael Walle
• [PATCH V4] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Michael Walle
• [PATCH v4] sf: Query write-protection status before operating the flash   Michael Walle
• [PATCH 00/14] Add support for NVMEM API   Michael Walle
• [PATCH 00/14] Add support for NVMEM API   Michael Walle
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Michael Walle
• [PATCH] kontron-sl-mx8mm: change kernel_addr_r and scriptaddr   Michael Walle
• [PATCH] kontron-sl-mx8mm: change environment address variables   Michael Walle
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Michael Walle
• [PATCH] armv8: fsl-layerscape: use previous aligned address for gic_lpi_base   Michael Walle
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   Michael Walle
• [PATCH] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Michael Walle
• [PATCH v2] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration   Michael Walle
• [PATCH 1/2] fsl-layerscape: add dtb overlay feature   Michael Walle
• [PATCH v2 0/5] board: sl28: add basic PSCI implementation   Michael Walle
• [PATCH v2 1/5] armv8: include psci_update_dt() unconditionally   Michael Walle
• [PATCH v2 2/5] armv8: layerscape: get rid of smc_call()   Michael Walle
• [PATCH v2 3/5] armv8: psci: skip setup code if we are not EL3   Michael Walle
• [PATCH v2 4/5] armv8: psci: add ARMV8_PSCI_RELOCATE Kconfig option   Michael Walle
• [PATCH v2 5/5] board: sl28: add basic PSCI implementation   Michael Walle
• [PATCH] cmd: abootimg: Accept a DTB in second for index 0   Linus Walleij
• [PATCH] board: stemmy: Detect board variants and patch DTB   Linus Walleij
• [PATCH v2] board: stemmy: Detect board variants and patch DTB   Linus Walleij
• [PATCH] image: Control FIT signature verification at runtime   ChiaWei Wang
• [PATCH] crypto: aspeed: fix polling RSA status wrong issue   ChiaWei Wang
• [PATCH v2] console: usb: kbd: Limit poll frequency to improve performance   Thomas Watson
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Thomas Watson
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Thomas Watson
• [PATCH v3] console: usb: kbd: Limit poll frequency to improve performance   Thomas Watson
• Device Tree Overlays and FIT Images - Are they supported together fully?   Westermann, Oliver
• Device Tree Overlays and FIT Images - Are they supported together fully?   Westermann, Oliver
• [EXTERNAL] Re: Device Tree Overlays and FIT Images - Are they supported together fully?   Westermann, Oliver
• [EXTERNAL] Re: Device Tree Overlays and FIT Images - Are they supported together fully?   Westermann, Oliver
• [PATCH] image: Control FIT signature verification at runtime   Patrick Williams
• [PATCH 0/7] Migrate omap_ehci to use phy driver   Derald Woods
• [PATCH] ARM: am3517-evm: Remove more non-DM legacy ethernet reset code   Derald Woods
• [PATCH 1/2] ARM: dts: am3517-evm: Sync DTS with Linux 5.17-rc5   Derald Woods
• [PATCH 2/2] ARM: am3517_evm: Remove hard-coded pin muxing   Derald Woods
• [PATCH v3 0/5] fs/erofs: new filesystem   Gao Xiang
• [PATCH v3 0/5] fs/erofs: new filesystem   Gao Xiang
• k210 spi flash regression   Pratyush Yadav
• [PATCH] spi: dw: Fix broken dw_spi_mem_ops()   Pratyush Yadav
• [PATCH 0/5] binman: Improvements to FIT entry type   Alper Nebi Yasak
• [PATCH 1/5] binman: Fix subentry expansion for FIT entry type   Alper Nebi Yasak
• [PATCH 2/5] binman: Register and check bintools from FIT subentries   Alper Nebi Yasak
• [PATCH 3/5] binman: Check missing bintools of Section subclasses   Alper Nebi Yasak
• [PATCH 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Alper Nebi Yasak
• [PATCH 5/5] binman: Update image positions of FIT subentries   Alper Nebi Yasak
• [PATCH 0/5] binman: Improvements to FIT entry type   Alper Nebi Yasak
• [PATCH v2 0/5] binman: Improvements to FIT entry type   Alper Nebi Yasak
• [PATCH v2 1/5] binman: Fix subentry expansion for FIT entry type   Alper Nebi Yasak
• [PATCH v2 2/5] binman: Register and check bintools from FIT subentries   Alper Nebi Yasak
• [PATCH v2 3/5] binman: Check missing bintools of Section subclasses   Alper Nebi Yasak
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Alper Nebi Yasak
• [PATCH v2 5/5] binman: Update image positions of FIT subentries   Alper Nebi Yasak
• Running qemu tests on RISC-V   Alper Nebi Yasak
• [PATCH] binman: Correct the error message for a bad hash algorithm   Alper Nebi Yasak
• Running qemu tests on RISC-V   Alper Nebi Yasak
• [PATCH] binman: Skip processing "hash" subnodes of FIT subsections   Alper Nebi Yasak
• [PATCH v2] binman: Skip processing "hash" subnodes of FIT subsections   Alper Nebi Yasak
• Running qemu tests on RISC-V   Alper Nebi Yasak
• Running qemu tests on RISC-V   Alper Nebi Yasak
• [PATCH 00/24] binman: rockchip: Migrate from rockchip SPL_FIT_GENERATOR script   Alper Nebi Yasak
• [PATCH 01/24] moveconfig: Show the config name rather than the defconfig   Alper Nebi Yasak
• [PATCH 02/24] moveconfig: Allow regex matches when finding combinations   Alper Nebi Yasak
• [PATCH 03/24] spl: x86: Correct the binman symbols for SPL   Alper Nebi Yasak
• [PATCH 04/24] spl: Allow disabling binman symbols in SPL   Alper Nebi Yasak
• [PATCH 06/24] dtoc: Support adding a string list to a device tree   Alper Nebi Yasak
• [PATCH 09/24] dtoc: Support reading a list of arguments   Alper Nebi Yasak
• [PATCH 11/24] elf: Add a way to read segment information from an ELF file   Alper Nebi Yasak
• [PATCH 14/24] binman: Support a list of strings with the mkimage etype   Alper Nebi Yasak
• [PATCH 16/24] binman: Move entry-data collection into a Entry method   Alper Nebi Yasak
• [PATCH 17/24] binman: fit: Refactor to reduce function size   Alper Nebi Yasak
• [PATCH 20/24] binman: Support splitting an ELF file into multiple nodes   Alper Nebi Yasak
• [PATCH 22/24] rockchip: Support building the all output files in binman   Alper Nebi Yasak
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Alper Nebi Yasak
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Alper Nebi Yasak
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Alper Nebi Yasak
• [PATCH v2 4/5] binman: Convert FIT entry type to a subclass of Section entry type   Alper Nebi Yasak
• [PATCH v4 1/1] env: fat: Allow overriding interface, device and partition   He Yong
• [PATCH v3 1/1] env: fat: Allow overriding interface, device and partition   He Yong
• [PATCH] i2c: fix always-true condition in i2c_probe_chip()   Nikita Yushchenko
• [PATCH] ti: i2c: fix probe_chip() return value   Nikita Yushchenko
• [PATCH] spi: spi-mem: fix always-true condition in spi_mem_exec_op()   Nikita Yushchenko
• [PATCH 0/2] add and use reset_get_bulk_optional()   Nikita Yushchenko
• [PATCH 1/2] reset: introduce reset_get_bulk_optional()   Nikita Yushchenko
• [PATCH 2/2] spi: cadence_qspi: use reset_get_bulk_optional()   Nikita Yushchenko
• [PATCH v4 0/2] Add support of the FXL6408 GPIO expander   Marcel Ziswiler
• i.MX8M Mini Hangs at ATF when booting from USB   Marcel Ziswiler
• [PATCH v2 0/2] Use the complete 512kb (4 blocks) nand partition reserved for u-boot   Marcel Ziswiler
• [PATCH v2 1/2] colibri-imx6ull: improve env badblock management   Marcel Ziswiler
• [PATCH v2 2/2] colibri-imx7: improve env badblock management   Marcel Ziswiler
• make mrproper deletes lib/acpi/dsdt.c   Marcel Ziswiler
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Marcel Ziswiler
• [PATCH v3] board: toradex: add verdin imx8m plus support   Marcel Ziswiler
• [PATCH] tools/mrvl_uart.sh: Remove script   Marcel Ziswiler
• [PATCH] tools/mrvl_uart.sh: Remove script   Marcel Ziswiler
• [PATCH] tools/mrvl_uart.sh: Remove script   Marcel Ziswiler
• [PATCH] tools/mrvl_uart.sh: Remove script   Marcel Ziswiler
• [PATCH] tools/mrvl_uart.sh: Remove script   Marcel Ziswiler
• [PATCH] tools/mrvl_uart.sh: Remove script   Marcel Ziswiler
• [PATCH v3] board: toradex: add verdin imx8m plus support   Marcel Ziswiler
• [PATCH v4] board: toradex: add verdin imx8m plus support   Marcel Ziswiler
• [PATCH] lib: acpi: rename dsdt.c to acpi_write_dsdt.c   Marcel Ziswiler
• [EXTERNAL] Re: Device Tree Overlays and FIT Images - Are they supported together fully?   Marcel Ziswiler
• U-Boot Digest, Vol 165, Issue 29   Marcel Ziswiler
• [PATCH] ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string   Marcel Ziswiler
• [PATCH] include: configs: *imx8*: remove IMX_FEC_BASE   Marcel Ziswiler
• [PATCH] armv8: fsl-layerscape: use previous aligned address for gic_lpi_base   Marc Zyngier
• [PATCH] arch: arm: recode the initialization of GICv3 ITS Re-Distributor tables   Marc Zyngier
• [PATCH v2] tools/mxsimage: Remove fclose on empty FILE pointer   sbabic at denx.de
• [PATCH 2/2] imx: imx8mn_beacon: Remove redundant code   sbabic at denx.de
• [PATCH 08/20] imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest   sbabic at denx.de
• [PATCH V3] cmd_nandbcb: Support secondary boot address of imx8mn   sbabic at denx.de
• [PATCH V2 2/2] imx: imx8mm_beacon: Enable USB   sbabic at denx.de
• [PATCH v6 1/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   sbabic at denx.de
• [PATCH v1 2/2] imx: imx8qm_rm7720: adjust fdt_addr   sbabic at denx.de
• [PATCH] arm: imx: imx8mq: add support to get values for more clocks   sbabic at denx.de
• [PATCH v2 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename   sbabic at denx.de
• [PATCH] ARM: imx8m: support env in fat and ext4   sbabic at denx.de
• [PATCH 1/3] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy   sbabic at denx.de
• [PATCH 02/20] arm: imx8ulp: Allocate LPAV resources to AP domain   sbabic at denx.de
• [PATCH] imx: imx8mn_beacon: Fix USB booting   sbabic at denx.de
• [PATCH v2 3/3] mx7ulp_com: add support for SPL   sbabic at denx.de
• [PATCH 04/20] imx8ulp: clock: Support LPAV clocks in cgc and pcc   sbabic at denx.de
• [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1   sbabic at denx.de
• [PATCH 14/20] imx8ulp: Update ethernet mac to get from fuse   sbabic at denx.de
• [PATCH v2 1/4] arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties   sbabic at denx.de
• [PATCH] spl: Provide more space to be used for storing SPL on imx28 OCRAM   sbabic at denx.de
• [PATCH v2] ARM: dts: imx6ull: Use the correct name for ESAI_TX0   sbabic at denx.de
• [PATCH 20/20] imx8ulp: ddr: Fix DDR frequency request issue   sbabic at denx.de
• [PATCH v2 1/3] mx7ulp: select soc features   sbabic at denx.de
• [PATCH v2 4/4] arm: dts: Enable support for USB on XEA (imx28) board   sbabic at denx.de
• [PATCH] cmd: bcb: fix bcb struct alignment issue   sbabic at denx.de
• [PATCH 2/3] arm64: dts: imx8mm: Add the pcie phy support   sbabic at denx.de
• [PATCH 19/20] imx8ulp:ddr: saving the dram config timing data into sram   sbabic at denx.de
• [PATCH 2/2] arm: imx8m: imx8mm-cl-iot-gate: detect extension board   sbabic at denx.de
• [PATCH] imx8mm-venice-gw7902: fix M2_RST# gpio pinmux   sbabic at denx.de
• [PATCH 2/2] ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12   sbabic at denx.de
• [PATCH 11/20] imx8ulp: Workaround LPOSC_TRIM fuse load issue   sbabic at denx.de
• [PATCH 1/2] ARM: imx: imx8m: Align PLL 1.2 GHz option with Linux   sbabic at denx.de
• [PATCH] imx: nandbcb: Fix printf format in write_fcb   sbabic at denx.de
• [PATCH 1/2] imx: imx8mm_beacon: Remove redundant code   sbabic at denx.de
• [PATCH] imx8m: lock id_swap_bypass bit in tzc380 enable   sbabic at denx.de
• [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig   sbabic at denx.de
• [PATCH v3] arm: xea: Modify board code to generate single binary u-boot   sbabic at denx.de
• [PATCH] imx: ventana: correct splashimage load address   sbabic at denx.de
• [RESEND PATCH 2/2] mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ   sbabic at denx.de
• [PATCH 12/20] imx8ulp: clock: Reset DDR controller before clock enable   sbabic at denx.de
• [PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names   sbabic at denx.de
• [PATCH 10/20] imx8ulp: Remove freescale name from CPU revision   sbabic at denx.de
• [PATCH v9] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   sbabic at denx.de
• [PATCH v2] imx8mq_evk: configs: add/cleanup variables for distro boot   sbabic at denx.de
• [RESEND PATCH 1/2] imx: mx6ull: fix REFTOP_VBGADJ setting   sbabic at denx.de
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10{20|50}   sbabic at denx.de
• [PATCH 3/3] arm64: dts: imx8mm: Add the pcie support   sbabic at denx.de
• [PATCH 13/20] imx8ulp: clock: Support to reset DCNano and MIPI DSI   sbabic at denx.de
• [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export   sbabic at denx.de
• [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export   sbabic at denx.de
• [PATCH 1/1] configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin   sbabic at denx.de
• [PATCH 01/20] imx8ulp: soc: Check the DBD_EN fuse before setting RDC   sbabic at denx.de
• [PATCH] mx6: Use imx6_src_get_boot_mode() to check boot device   sbabic at denx.de
• [PATCH 18/20] imx8ulp: implement to obtain the SoC current temperature   sbabic at denx.de
• [PATCH] regulator: bd718x7: Bypass bogus warnings   sbabic at denx.de
• [PATCH v2] imx: Enable ACTLR.SMP in SPL for i.MX6/7   sbabic at denx.de
• [PATCH] imx: imx8mn_beacon: Enable TrustZone   sbabic at denx.de
• [PATCH v4 2/2] colibri-imx8x: add on-module gpio expander fxl6408   sbabic at denx.de
• [PATCH] smegw01: Update DDR initialization   sbabic at denx.de
• [PATCH] mxs: power: Change sequence of enabling DCDC switches   sbabic at denx.de
• [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi   sbabic at denx.de
• [PATCH 1/2] arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays   sbabic at denx.de
• [PATCH 09/20] imx8ulp: Fix DCNANO QoS setting   sbabic at denx.de
• [PATCH] spi: mxc_spi: remove redundant code in spi_xchg_single()   sbabic at denx.de
• [PATCH] Makefile: imx: Do not call arch/arm/mach-imx flash.bin generation if BINMAN enabled   sbabic at denx.de
• [PATCH 1/2] ARM: dts: imx: Add labels to remaining anatop regulators   sbabic at denx.de
• [PATCH 15/20] imx8ulp: clock: Support to enable/disable the ADC1 clock   sbabic at denx.de
• [PATCH 03/20] imx8ulp: assign PXP/HIFI4/EPDC to APD domain   sbabic at denx.de
• [PATCH 16/20] imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock   sbabic at denx.de
• [PATCH 1/1] imx8mm-cl-iot-gate-optee: add CONFIG_SPL_MMC and CONFIG_SPL_SERIAL   sbabic at denx.de
• [PATCH] mach-imx: iomux-v3: add a define for the SION bit   sbabic at denx.de
• [PATCH] arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0   sbabic at denx.de
• [PATCH v1 2/2] colibri-imx7: improve env badblock management   sbabic at denx.de
• [PATCH 06/20] imx8ulp: rdc: allow A35 access flexspi0 mem   sbabic at denx.de
• [PATCH] arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B   sbabic at denx.de
• [PATCH v2 4/4] arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming   sbabic at denx.de
• [PATCH] ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board   sbabic at denx.de
• [PATCH v2 3/4] arm: xea: config: Provide special defconfig for a single binary u-boot   sbabic at denx.de
• [PATCH 07/20] imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display   sbabic at denx.de
• [PATCH 2/2] configs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCF   sbabic at denx.de
• [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export   sbabic at denx.de
• [PATCH] imx8mn-ddr4-evk: generate single bootable image   sbabic at denx.de
• [PATCH v7 1/2] arm: dts: add imx8mp-rsb3720-a1 dts file   sbabic at denx.de
• [PATCH 2/2] ARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options   sbabic at denx.de
• [PATCH v2 1/4] xea: dts: Update the SPI-NOR flash memory partitions description   sbabic at denx.de
• [PATCH 05/20] imx8ulp: clock: Add MIPI DSI clock and DCNano clock   sbabic at denx.de
• [PATCH v2] arm: dts: imx8mq kernel dts updates   sbabic at denx.de
• [PATCH v4 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   sbabic at denx.de
• [PATCH v1 1/2] imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MB   sbabic at denx.de
• [PATCH] imx8m: Drop unused function env_get_offset   sbabic at denx.de
• [RESEND PATCH v7 1/1] arm: imx8m: add support for Advantech RSB-3720   sbabic at denx.de
• [PATCH 2/2] mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps   sbabic at denx.de
• [PATCH v2 2/4] xea: defconfig: Update defconfig to support mtd partitions r/w by name   sbabic at denx.de
• [PATCH 2/3] mmc: fsl_esdhc_imx: remove redundant ARCH_MXC   sbabic at denx.de
• [PATCH 1/2] mmc: fsl_esdhc_imx: Fix fsl_esdhc_wait_dat0   sbabic at denx.de
• [PATCH] imx: spl: Fix typo BMODE_EMI -> BMODE_EIM   sbabic at denx.de
• [PATCH] freescale: imx8mm_evk: Use IS_ENABLED instead of #ifdef   sbabic at denx.de
• [PATCH 1/2] cmd: fuse: add a fuse comparison function   sbabic at denx.de
• [PATCH 2/2] configs/*imx8mn*: remove [SPL_]CLK_COMPOSITE_CCF   sbabic at denx.de
• [PATCH 1/2] ARM: imx: imx8mn-ddr4-evk: Fix boot from SD card   sbabic at denx.de
• [PATCH v4] board: gateworks: venice: add imx8mn-gw7902 support   sbabic at denx.de
• [PATCH v2] Enable Fastboot(UUU) for O4-iMX6ULL-NANO boards   sbabic at denx.de
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imx8mn   sbabic at denx.de
• [PATCH 2/2] cmd: fuse: Add a command to read fuses to memory   sbabic at denx.de
• [PATCH] board: gateworks: venice: config file cleanups   sbabic at denx.de
• [PATCH 3/3] mmc: fsl_esdhc_imx: correct the actual card clock   sbabic at denx.de
• [PATCH V2] imx8mm_beacon/imx8mn_beacon: Update build instructions   sbabic at denx.de
• [PATCH] kontron-pitx-imx8m: fix board_mmc_getcd()   sbabic at denx.de
• [PATCH v2 1/2] colibri-imx6ull: improve env badblock management   sbabic at denx.de
• [PATCH v2] ARM: imx: imx8mn-ddr4-evk: Add ethernet support   sbabic at denx.de
• [PATCH v2] kontron-sl-mx8mm: change environment address variables   sbabic at denx.de
• lib.a in tools/env   rich_ogrady at grayhill.com
• [PATCH v1 1/1] env: fat: Allow overriding interface, device and partition   hyyoxhk
• [PATCH v3 1/1] env: fat: Allow overriding interface, device and partition   hyyxohk
• [PATCH 2/3] dts: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH v2 2/3] dts: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH v2 2/3] dts: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH v2 2/3] dts: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH] ARM: dts: at91: sama7g5ek: disable slew rate for GMACs non MDIO pins   Eugen.Hristev at microchip.com
• [PATCH] ARM: at91: sama5d2: Enable the use of Galois Tables from ROM   Eugen.Hristev at microchip.com
• [PATCH 1/3] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   haibo.chen at nxp.com
• [PATCH 2/3] mmc: fsl_esdhc_imx: remove redundant ARCH_MXC   haibo.chen at nxp.com
• [PATCH 3/3] mmc: fsl_esdhc_imx: correct the actual card clock   haibo.chen at nxp.com
• [PATCH v2] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   haibo.chen at nxp.com
• [PATCH] drivers: rtc: fix null pointer access in armada38x_rtc_reset   fberder at outlook.fr
• [PATCH] Replace echo -n's used in environment processing with touch   qthedev
• [PATCH 2/2] common: drop CONFIG_SYS_RESET_ADDR   thomas at wytron.com.tw