[PATCHv2] arm64: zynqmp: Print the secure boot status information
Michal Simek
michal.simek at xilinx.com
Fri Feb 4 13:18:53 CET 2022
On 10/13/21 19:04, Jorge Ramirez-Ortiz wrote:
> Output the secure boot configuration to the console.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge at foundries.io>
> ---
>
> v2:
> Michal review 12 Aug 2021
> print information on SPL and UBOOT
> improve the print command
> add macros to mask the status
>
> arch/arm/mach-zynqmp/include/mach/hardware.h | 6 +++++-
> board/xilinx/zynqmp/zynqmp.c | 14 ++++++++++++++
> 2 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
> index eebf38551c..c6b1464a9f 100644
> --- a/arch/arm/mach-zynqmp/include/mach/hardware.h
> +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
> @@ -141,8 +141,12 @@ struct apu_regs {
> #define ZYNQMP_SILICON_VER_MASK 0xF
> #define ZYNQMP_SILICON_VER_SHIFT 0
>
> +#define ZYNQMP_CSU_STATUS_AUTHENTICATED BIT(0)
> +#define ZYNQMP_CSU_STATUS_ENCRYPTED BIT(1)
> +
> struct csu_regs {
> - u32 reserved0[4];
> + u32 status;
> + u32 reserved0[3];
> u32 multi_boot;
> u32 reserved1[11];
> u32 idcode;
> diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
> index 000a7cde8d..3e7ca2e9c6 100644
> --- a/board/xilinx/zynqmp/zynqmp.c
> +++ b/board/xilinx/zynqmp/zynqmp.c
> @@ -358,6 +358,18 @@ static int multi_boot(void)
> return multiboot;
> }
>
> +static void print_secure_boot(void)
> +{
> + u32 status = 0;
> +
> + if (zynqmp_mmio_read((ulong)&csu_base->status, &status))
> + return;
> +
> + printf("Secure Boot:\t%sauthenticated, %sencrypted\n",
> + status & ZYNQMP_CSU_STATUS_AUTHENTICATED ? "" : "not ",
> + status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not ");
> +}
> +
> #define PS_SYSMON_ANALOG_BUS_VAL 0x3210
> #define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914
>
> @@ -394,6 +406,8 @@ int board_init(void)
> fpga_add(fpga_xilinx, &zynqmppl);
> #endif
>
> + /* display secure boot information */
> + print_secure_boot();
> if (current_el() == 3)
> printf("Multiboot:\t%d\n", multi_boot());
>
Applied.
M
More information about the U-Boot
mailing list