[PATCH V3 10/16] arm: dts: k3-j721e-sk: Add initial A72 specific dts support

[Tom Rini]

On Wed, Feb 09, 2022 at 03:06:55PM +0530, Sinthu Raja wrote:

> From: Sinthu Raja <sinthu.raja at ti.com>
> 
> J721E Starter Kit (SK)[1] is a low cost, small form factor board designed
> for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
> performance vision accelerators, video codec accelerators, latest C71x
> and C66x DSP, high bandwidth real-time IPs for capture and display, GPU,
> dedicated safety island and security accelerators. The SoC is power
> optimized to provide best in class performance for industrial and
> automotive applications.
> 
>     J721E SK supports the following interfaces:
>     * 4 GB LPDDR4 RAM
>     * x1 Gigabit Ethernet interface
>     * x1 USB 3.0 Type-C port
>     * x3 USB 3.0 Type-A ports
>     * x1 PCIe M.2 E Key
>     * x1 PCIe M.2 M Key
>     * 512 Mbit OSPI flash
>     * x2 CSI2 Camera interface (RPi and TI Camera connector)
>     * 40-pin Raspberry Pi GPIO header
> 
> Add A72 specific dts for J721E-SK.
> 
> [1] https://www.ti.com/tool/SK-TDA4VM
> 
> Signed-off-by: Sinthu Raja <sinthu.raja at ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220217/1f82e46b/attachment.sig>