[PATCH u-boot-marvell 1/2] arm: mvebu: spl: Add option to reset the board on DDR training failure

[Marek Behún]

From: Marek Behún <marek.behun at nic.cz>

Some boards may occacionally fail DDR training. Currently we hang() in
this case. Add an option that makes the board do an immediate reset in
such a case, so that a new training is tried as soon as possible,
instead of hanging and possibly waiting for watchdog to reset the board.

Signed-off-by: Marek Behún <marek.behun at nic.cz>
---
 arch/arm/mach-mvebu/Kconfig | 9 +++++++++
 arch/arm/mach-mvebu/spl.c   | 6 +++++-
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index d23cc0c760..ed957be6e1 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -213,6 +213,15 @@ config DDR_LOG_LEVEL
 	  At level 3, rovides the windows margin of each DQ as a results of
 	  DQS centeralization.
 
+config DDR_RESET_ON_TRAINING_FAILURE
+	bool "Reset the board on DDR training failure instead of hanging"
+	depends on ARMADA_38X || ARMADA_XP
+	help
+	  If DDR training fails in SPL, reset the board instead of hanging.
+	  Some boards are known to fail DDR training occasionally and an
+	  immediate reset may be preferable to waiting until the board is
+	  reset by watchdog (if there even is one).
+
 config SYS_BOARD
 	default "clearfog" if TARGET_CLEARFOG
 	default "helios4" if TARGET_HELIOS4
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 273ecb8bd6..d3c3bdc74d 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <cpu_func.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <hang.h>
@@ -330,7 +331,10 @@ void board_init_f(ulong dummy)
 	ret = ddr3_init();
 	if (ret) {
 		printf("ddr3_init() failed: %d\n", ret);
-		hang();
+		if (IS_ENABLED(CONFIG_DDR_RESET_ON_TRAINING_FAILURE))
+			reset_cpu();
+		else
+			hang();
 	}
 #endif
 
-- 
2.34.1