[PATCH 06/27] imx: imx8ulp_evk: Remove PMIC Bucks PWM mode settings

Peng Fan (OSS) peng.fan at oss.nxp.com
Mon Feb 14 13:47:14 CET 2022


From: Ye Li <ye.li at nxp.com>

This workaround is not needed on i.MX8ULP proto-1B EVK as board has
fixed the problem. Because we don't support proto-1A any longer,
remove the PMIC settings.

Reviewed-by: Peng Fan <peng.fan at nxp.com>
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/imx8ulp_evk/spl.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/board/freescale/imx8ulp_evk/spl.c b/board/freescale/imx8ulp_evk/spl.c
index c17d5eff7d..b314901409 100644
--- a/board/freescale/imx8ulp_evk/spl.c
+++ b/board/freescale/imx8ulp_evk/spl.c
@@ -35,24 +35,6 @@ u32 spl_boot_device(void)
 
 int power_init_board(void)
 {
-	u32 pmic_reg;
-
-	/* PMIC set bucks1-4 to PWM mode */
-	upower_pmic_i2c_read(0x10, &pmic_reg);
-	upower_pmic_i2c_read(0x14, &pmic_reg);
-	upower_pmic_i2c_read(0x21, &pmic_reg);
-	upower_pmic_i2c_read(0x2e, &pmic_reg);
-
-	upower_pmic_i2c_write(0x10, 0x3d);
-	upower_pmic_i2c_write(0x14, 0x7d);
-	upower_pmic_i2c_write(0x21, 0x7d);
-	upower_pmic_i2c_write(0x2e, 0x3d);
-
-	upower_pmic_i2c_read(0x10, &pmic_reg);
-	upower_pmic_i2c_read(0x14, &pmic_reg);
-	upower_pmic_i2c_read(0x21, &pmic_reg);
-	upower_pmic_i2c_read(0x2e, &pmic_reg);
-
 	/* Set buck3 to 1.1v OD */
 	upower_pmic_i2c_write(0x22, 0x28);
 	return 0;
-- 
2.30.0



More information about the U-Boot mailing list