[PATCH v2 24/25] rockchip: Convert all boards to use binman

[Simon Glass]

Instead of the bash script, use binman to generate the FIT for arm64.

For 32-bit boards, use binman for all images, dropping the intermediate
files.

With this change, only Zynq is now using SPL_FIT_GENERATOR so update the
Kconfig rule accordingly.

Clean up the Makefile to the extent possible. Unfortunately, two boards
do not use SPL_FRAMEWORK so don't enable the u-boot.img rule:

   evb-rk3036
   kylin-rk3036

So a small remnant remains.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 Makefile     | 39 ++-------------------------------------
 boot/Kconfig |  2 +-
 2 files changed, 3 insertions(+), 38 deletions(-)

diff --git a/Makefile b/Makefile
index 697cc51d67..7a4f95b898 100644
--- a/Makefile
+++ b/Makefile
@@ -976,19 +976,8 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
 INPUTS-y += u-boot-with-dtb.bin
 endif
 
-ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
-# On ARM64 this target is produced by binman so we don't need this dep
-ifeq ($(CONFIG_ARM64),y)
-ifeq ($(CONFIG_SPL),y)
-# TODO: Get binman to generate this too
-INPUTS-y += u-boot-rockchip.bin
-endif
-else
-ifeq ($(CONFIG_SPL),y)
-# Generate these inputs for binman which will create the output files
-INPUTS-y += idbloader.img u-boot.img
-endif
-endif
+ifeq ($(CONFIG_ARCH_ROCKCHIP)_$(CONFIG_SPL_FRAMEWORK),y_)
+INPUTS-y += u-boot.img
 endif
 
 INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
@@ -1473,30 +1462,6 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
 
-ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
-
-# TPL + SPL
-ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
-MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
-tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
-	$(call if_changed,mkimage)
-idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
-	$(call if_changed,cat)
-else
-MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
-idbloader.img: spl/u-boot-spl.bin FORCE
-	$(call if_changed,mkimage)
-endif
-
-ifeq ($(CONFIG_ARM64),y)
-OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
-	--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
-	$(call if_changed,pad_cat)
-endif # CONFIG_ARM64
-
-endif # CONFIG_ARCH_ROCKCHIP
-
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
 
diff --git a/boot/Kconfig b/boot/Kconfig
index b83a4e8400..ae1a37ae92 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -275,7 +275,7 @@ config SPL_FIT_SOURCE
 
 config USE_SPL_FIT_GENERATOR
 	bool "Use a script to generate the .its script"
-	default y if SPL_FIT && (!ARCH_SUNXI && !RISCV)
+	default y if SPL_FIT && ARCH_ZYNQMP
 
 config SPL_FIT_GENERATOR
 	string ".its file generator script for U-Boot FIT image"
-- 
2.35.1.574.g5d30c73bfb-goog