[PATCH] imx: imx8mm/imx8mn_beacon: Remove redundant code

[Adam Ford]

The Ethernet controller and PHY use the device tree info to
configure themselves, so it's not necessary to manually do it
in the board file.  This permits the removal of a bunch of headers
as well.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/board/beacon/imx8mm/imx8mm_beacon.c b/board/beacon/imx8mm/imx8mm_beacon.c
index c228bbf777..204235a3f8 100644
--- a/board/beacon/imx8mm/imx8mm_beacon.c
+++ b/board/beacon/imx8mm/imx8mm_beacon.c
@@ -1,52 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2020 Compass Electronics Group, LLC
+ * Copyright 2022 Logic PD, Inc. dba Beacon EmbeddedWorks
  */
 
-#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
 #include <asm/global_data.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-
 DECLARE_GLOBAL_DATA_PTR;
 
-#if IS_ENABLED(CONFIG_FEC_MXC)
-static int setup_fec(void)
-{
-	struct iomuxc_gpr_base_regs *gpr =
-		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
-
-	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
-	clrsetbits_le32(&gpr->gpr[1], 0x2000, 0);
-
-	return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-	/* enable rgmii rxc skew and phy mode select to RGMII copper */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
-
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
-
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-	return 0;
-}
-#endif
-
 int board_init(void)
 {
-	if (IS_ENABLED(CONFIG_FEC_MXC))
-		setup_fec();
-
 	return 0;
 }
diff --git a/board/beacon/imx8mn/imx8mn_beacon.c b/board/beacon/imx8mn/imx8mn_beacon.c
index 6397dac872..204235a3f8 100644
--- a/board/beacon/imx8mn/imx8mn_beacon.c
+++ b/board/beacon/imx8mn/imx8mn_beacon.c
@@ -1,52 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2020 Compass Electronics Group, LLC
+ * Copyright 2022 Logic PD, Inc. dba Beacon EmbeddedWorks
  */
 
-#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
 #include <asm/global_data.h>
-#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if IS_ENABLED(CONFIG_FEC_MXC)
-static int setup_fec(void)
-{
-	struct iomuxc_gpr_base_regs *gpr =
-		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
-
-	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
-	clrsetbits_le32(&gpr->gpr[1], 0x2000, 0);
-
-	return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-	/* enable rgmii rxc skew and phy mode select to RGMII copper */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
-
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
-
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-	return 0;
-}
-#endif
-
 int board_init(void)
 {
-	if (IS_ENABLED(CONFIG_FEC_MXC))
-		setup_fec();
-
 	return 0;
 }
-- 
2.34.1