[PATCH 22/24] rockchip: Support building the all output files in binman

[Simon Glass]

Add the required binman images to replace the Makefile rules which are
currently used. This includes subsuming:

   - tpl/u-boot-tpl-rockchip.bin if TPL is enabled
   - idbloader.img if either or both of SPL and TPL are enabled
   - u-boot.itb2 if SPL_FIT is enabled
   - u-boot-rockchip.bin if SPL is used, either using u-boot.itb2 when
     SPL_FIT is enabled or u-boot.img when it isn't

For now u-boot.itb2 is used as the FIT filename to avoid conflicting with
the current u-boot.itb file. This will be updated in a future patch.

Note that the intermediate files are dropped with binman, since it
producing everything in one pass. This means that
tpl/u-boot-tpl-rockchip.bin is not created, for example.

Note that for some 32-bit rk3288 boards, rockchip-optee.dtsi is included.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/dts/rockchip-u-boot.dtsi | 84 ++++++++++++++++++++++++++++++-
 1 file changed, 82 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index eae3ee715d..6246ca12b7 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -17,13 +17,93 @@
 		filename = "u-boot-rockchip.bin";
 		pad-byte = <0xff>;
 
-		blob {
-			filename = "idbloader.img";
+#ifdef CONFIG_TPL
+		mkimage {
+			args = "-n", CONFIG_SYS_SOC, "-T rksd";
+
+			u-boot-tpl {
+			};
+		};
+
+		u-boot-spl {
 		};
+#elif defined(CONFIG_SPL) /* SPL only */
+		mkimage {
+			args = "-n", CONFIG_SYS_SOC, "-T rksd";
+
+			u-boot-spl {
+			};
+		};
+#endif
+#if defined(CONFIG_SPL_FIT) && defined(CONFIG_ARM64)
+		fit: fit {
+			description = "FIT image for U-Boot with bl31 (TF-A)";
+			#address-cells = <1>;
+			fit,fdt-list = "of-list";
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+			images {
+				u-boot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					os = "U-Boot";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+					u-boot-nodtb {
+					};
+				};
 
+				@atf-SEQ {
+					fit,operation = "split-elf";
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					os = "arm-trusted-firmware";
+					compression = "none";
+					fit,load;
+					fit,entry;
+					fit,data;
+
+					atf-bl31 {
+					};
+				};
+				@tee-SEQ {
+					fit,operation = "split-elf";
+					description = "TEE";
+					type = "tee";
+					arch = "arm64";
+					os = "tee";
+					compression = "none";
+					fit,load;
+					fit,entry;
+					fit,data;
+
+					op-tee {
+					};
+				};
+
+				@fdt-SEQ {
+					description = "fdt-NAME";
+					compression = "none";
+					type = "flat_dt";
+				};
+			};
+
+			configurations {
+				default = "@config-DEFAULT-SEQ";
+				@config-SEQ {
+					description = "NAME.dtb";
+					fdt = "fdt-SEQ";
+					firmware = "u-boot";
+					fit,loadables;
+				};
+			};
+		};
+#else
 		u-boot-img {
 			offset = <CONFIG_SPL_PAD_TO>;
 		};
+#endif /* CONFIG_ARM64 */
 	};
 };
 #endif
-- 
2.35.0.263.gb82422642f-goog