[PATCH] arm: pdu001: Setup pinmux for console UART as early as possible
trini at konsulko.com
Mon Feb 21 15:09:24 CET 2022
On Mon, Feb 21, 2022 at 02:50:19PM +0100, Felix Brack wrote:
> Hi Tom,
> On 21.02.22 14:34, Tom Rini wrote:
> > On Mon, Feb 21, 2022 at 02:26:05PM +0100, Felix Brack wrote:
> >> To make sure we get a working console as soon as possible in the SPL the
> >> UART pins require to be configured earlier. This is especially
> >> true for the pins of UART3, since the PDU001 board uses this UART for
> >> the console by default.
> >> Signed-off-by: Felix Brack <fb at ltec.ch>
> >> ---
> >> board/eets/pdu001/board.c | 30 ++++++++++++++++++++++++++++++
> >> 1 file changed, 30 insertions(+)
> > Does this replace
> > https://email@example.com/
> > or go in addition to it? Thanks!
> No it's not a replacement. It is kind of addition but not related to the
> early debugging UART, hence a second patch.
OK, thanks just confirming.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 659 bytes
Desc: not available
More information about the U-Boot