[PATCH] arm: pdu001: Setup pinmux for console UART as early as possible
trini at konsulko.com
Mon Feb 28 21:47:25 CET 2022
On Mon, Feb 21, 2022 at 02:26:05PM +0100, Felix Brack wrote:
> To make sure we get a working console as soon as possible in the SPL the
> UART pins require to be configured earlier. This is especially
> true for the pins of UART3, since the PDU001 board uses this UART for
> the console by default.
> Signed-off-by: Felix Brack <fb at ltec.ch>
Applied to u-boot/master, thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 659 bytes
Desc: not available
More information about the U-Boot