[PATCH v3 2/2] stm32mp: psci: Implement PSCI system suspend and DRAM SSR
Marek Vasut
marex at denx.de
Fri Feb 25 02:15:59 CET 2022
Implement PSCI system suspend and placement of DRAM into SSR while the
CPUs are in suspend. This saves non-trivial amount of power in suspend,
on 2x W632GU6NB-15 ~710mW.
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
---
V2: - Lowercase all the hex values
- Sort bit macros in descending order
- Use GENMASK even though it seems to only obfuscate the macros
- Rename SYSCFG_CMPCR_MPUEN to SYSCFG_CMPENR_MPUEN
- Use ARM CP15 timer in secure_udelay() and secure_waitbits()
- Restore DDRC PWRCTL after return from SSR
- Call ISB/DSB before WFI
- Test on STM32MP157C DK2, saves ~420mW here per USB-C power meter
V3: Add RB by Patrice
---
arch/arm/mach-stm32mp/include/mach/stm32.h | 3 +
arch/arm/mach-stm32mp/psci.c | 527 ++++++++++++++++++++-
2 files changed, 519 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index c11a9903f20..47e88fc3dcd 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -16,8 +16,11 @@
*/
#define STM32_RCC_BASE 0x50000000
#define STM32_PWR_BASE 0x50001000
+#define STM32_SYSCFG_BASE 0x50020000
#define STM32_DBGMCU_BASE 0x50081000
#define STM32_FMC2_BASE 0x58002000
+#define STM32_DDRCTRL_BASE 0x5A003000
+#define STM32_DDRPHYC_BASE 0x5A004000
#define STM32_TZC_BASE 0x5C006000
#define STM32_ETZPC_BASE 0x5C007000
#define STM32_STGEN_BASE 0x5C008000
diff --git a/arch/arm/mach-stm32mp/psci.c b/arch/arm/mach-stm32mp/psci.c
index 155aa79cd5e..86c160987a9 100644
--- a/arch/arm/mach-stm32mp/psci.c
+++ b/arch/arm/mach-stm32mp/psci.c
@@ -11,19 +11,152 @@
#include <asm/io.h>
#include <asm/psci.h>
#include <asm/secure.h>
+#include <hang.h>
#include <linux/bitops.h>
-#define BOOT_API_A7_CORE0_MAGIC_NUMBER 0xCA7FACE0
-#define BOOT_API_A7_CORE1_MAGIC_NUMBER 0xCA7FACE1
-
-#define MPIDR_AFF0 GENMASK(7, 0)
-
-#define RCC_MP_GRSTCSETR (STM32_RCC_BASE + 0x0404)
-#define RCC_MP_GRSTCSETR_MPUP1RST BIT(5)
-#define RCC_MP_GRSTCSETR_MPUP0RST BIT(4)
-#define RCC_MP_GRSTCSETR_MPSYSRST BIT(0)
-
-#define STM32MP1_PSCI_NR_CPUS 2
+/* PWR */
+#define PWR_CR3 0x0c
+#define PWR_MPUCR 0x10
+
+#define PWR_CR3_DDRSREN BIT(10)
+#define PWR_CR3_DDRRETEN BIT(12)
+
+#define PWR_MPUCR_PDDS BIT(0)
+#define PWR_MPUCR_CSTDBYDIS BIT(3)
+#define PWR_MPUCR_CSSF BIT(9)
+
+/* RCC */
+#define RCC_DDRITFCR 0xd8
+
+#define RCC_DDRITFCR_DDRC1EN BIT(0)
+#define RCC_DDRITFCR_DDRC1LPEN BIT(1)
+#define RCC_DDRITFCR_DDRC2EN BIT(2)
+#define RCC_DDRITFCR_DDRC2LPEN BIT(3)
+#define RCC_DDRITFCR_DDRPHYCEN BIT(4)
+#define RCC_DDRITFCR_DDRPHYCLPEN BIT(5)
+#define RCC_DDRITFCR_DDRCAPBEN BIT(6)
+#define RCC_DDRITFCR_DDRCAPBLPEN BIT(7)
+#define RCC_DDRITFCR_AXIDCGEN BIT(8)
+#define RCC_DDRITFCR_DDRPHYCAPBEN BIT(9)
+#define RCC_DDRITFCR_DDRPHYCAPBLPEN BIT(10)
+#define RCC_DDRITFCR_DDRCKMOD_MASK GENMASK(22, 20)
+#define RCC_DDRITFCR_GSKPCTRL BIT(24)
+
+#define RCC_MP_SREQSETR 0x104
+#define RCC_MP_SREQCLRR 0x108
+
+#define RCC_MP_CIER 0x414
+#define RCC_MP_CIFR 0x418
+#define RCC_MP_CIFR_WKUPF BIT(20)
+
+/* SYSCFG */
+#define SYSCFG_CMPCR 0x20
+#define SYSCFG_CMPCR_SW_CTRL BIT(2)
+#define SYSCFG_CMPENSETR 0x24
+#define SYSCFG_CMPENCLRR 0x28
+#define SYSCFG_CMPENR_MPUEN BIT(0)
+
+/* DDR Controller registers offsets */
+#define DDRCTRL_STAT 0x004
+#define DDRCTRL_PWRCTL 0x030
+#define DDRCTRL_PWRTMG 0x034
+#define DDRCTRL_HWLPCTL 0x038
+#define DDRCTRL_DFIMISC 0x1b0
+#define DDRCTRL_SWCTL 0x320
+#define DDRCTRL_SWSTAT 0x324
+#define DDRCTRL_PSTAT 0x3fc
+#define DDRCTRL_PCTRL_0 0x490
+#define DDRCTRL_PCTRL_1 0x540
+
+/* DDR Controller Register fields */
+#define DDRCTRL_STAT_OPERATING_MODE_MASK GENMASK(2, 0)
+#define DDRCTRL_STAT_OPERATING_MODE_NORMAL 0x1
+#define DDRCTRL_STAT_OPERATING_MODE_SR 0x3
+#define DDRCTRL_STAT_SELFREF_TYPE_MASK GENMASK(5, 4)
+#define DDRCTRL_STAT_SELFREF_TYPE_ASR (0x3 << 4)
+#define DDRCTRL_STAT_SELFREF_TYPE_SR (0x2 << 4)
+
+#define DDRCTRL_PWRCTL_SELFREF_EN BIT(0)
+#define DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE BIT(3)
+#define DDRCTRL_PWRCTL_SELFREF_SW BIT(5)
+
+#define DDRCTRL_PWRTMG_SELFREF_TO_X32_MASK GENMASK(23, 16)
+#define DDRCTRL_PWRTMG_SELFREF_TO_X32_0 BIT(16)
+
+#define DDRCTRL_HWLPCTL_HW_LP_EN BIT(0)
+
+#define DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN BIT(0)
+
+#define DDRCTRL_SWCTL_SW_DONE BIT(0)
+
+#define DDRCTRL_SWSTAT_SW_DONE_ACK BIT(0)
+
+#define DDRCTRL_PSTAT_RD_PORT_BUSY_0 BIT(0)
+#define DDRCTRL_PSTAT_RD_PORT_BUSY_1 BIT(1)
+#define DDRCTRL_PSTAT_WR_PORT_BUSY_0 BIT(16)
+#define DDRCTRL_PSTAT_WR_PORT_BUSY_1 BIT(17)
+
+#define DDRCTRL_PCTRL_N_PORT_EN BIT(0)
+
+/* DDR PHY registers offsets */
+#define DDRPHYC_PIR 0x004
+#define DDRPHYC_PGSR 0x00c
+#define DDRPHYC_ACDLLCR 0x014
+#define DDRPHYC_ACIOCR 0x024
+#define DDRPHYC_DXCCR 0x028
+#define DDRPHYC_DSGCR 0x02c
+#define DDRPHYC_ZQ0CR0 0x180
+#define DDRPHYC_DX0DLLCR 0x1cc
+#define DDRPHYC_DX1DLLCR 0x20c
+#define DDRPHYC_DX2DLLCR 0x24c
+#define DDRPHYC_DX3DLLCR 0x28c
+
+/* DDR PHY Register fields */
+#define DDRPHYC_PIR_INIT BIT(0)
+#define DDRPHYC_PIR_DLLSRST BIT(1)
+#define DDRPHYC_PIR_DLLLOCK BIT(2)
+#define DDRPHYC_PIR_ITMSRST BIT(4)
+
+#define DDRPHYC_PGSR_IDONE BIT(0)
+
+#define DDRPHYC_ACDLLCR_DLLSRST BIT(30)
+#define DDRPHYC_ACDLLCR_DLLDIS BIT(31)
+
+#define DDRPHYC_ACIOCR_ACOE BIT(1)
+#define DDRPHYC_ACIOCR_ACPDD BIT(3)
+#define DDRPHYC_ACIOCR_ACPDR BIT(4)
+#define DDRPHYC_ACIOCR_CKPDD_MASK GENMASK(10, 8)
+#define DDRPHYC_ACIOCR_CKPDD_0 BIT(8)
+#define DDRPHYC_ACIOCR_CKPDR_MASK GENMASK(13, 11)
+#define DDRPHYC_ACIOCR_CKPDR_0 BIT(11)
+#define DDRPHYC_ACIOCR_CSPDD_MASK GENMASK(20, 18)
+#define DDRPHYC_ACIOCR_CSPDD_0 BIT(18)
+
+#define DDRPHYC_DXCCR_DXPDD BIT(2)
+#define DDRPHYC_DXCCR_DXPDR BIT(3)
+
+#define DDRPHYC_DSGCR_CKEPDD_MASK GENMASK(19, 16)
+#define DDRPHYC_DSGCR_CKEPDD_0 BIT(16)
+#define DDRPHYC_DSGCR_ODTPDD_MASK GENMASK(23, 20)
+#define DDRPHYC_DSGCR_ODTPDD_0 BIT(20)
+#define DDRPHYC_DSGCR_NL2PD BIT(24)
+#define DDRPHYC_DSGCR_CKOE BIT(28)
+
+#define DDRPHYC_ZQ0CRN_ZQPD BIT(31)
+
+#define DDRPHYC_DXNDLLCR_DLLDIS BIT(31)
+
+#define BOOT_API_A7_CORE0_MAGIC_NUMBER 0xca7face0
+#define BOOT_API_A7_CORE1_MAGIC_NUMBER 0xca7face1
+
+#define MPIDR_AFF0 GENMASK(7, 0)
+
+#define RCC_MP_GRSTCSETR (STM32_RCC_BASE + 0x0404)
+#define RCC_MP_GRSTCSETR_MPSYSRST BIT(0)
+#define RCC_MP_GRSTCSETR_MPUP0RST BIT(4)
+#define RCC_MP_GRSTCSETR_MPUP1RST BIT(5)
+
+#define STM32MP1_PSCI_NR_CPUS 2
#if STM32MP1_PSCI_NR_CPUS > CONFIG_ARMV7_PSCI_NR_CPUS
#error "invalid value for CONFIG_ARMV7_PSCI_NR_CPUS"
#endif
@@ -98,6 +231,7 @@ s32 __secure psci_features(u32 function_id, u32 psci_fid)
case ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE:
case ARM_PSCI_0_2_FN_SYSTEM_OFF:
case ARM_PSCI_0_2_FN_SYSTEM_RESET:
+ case ARM_PSCI_1_0_FN_SYSTEM_SUSPEND:
return 0x0;
}
return ARM_PSCI_RET_NI;
@@ -222,3 +356,374 @@ void __secure psci_system_off(void)
while (1)
wfi();
}
+
+static void __secure secure_udelay(unsigned int delay)
+{
+ u32 freq = cp15_read_cntfrq() / 1000000;
+ u64 start, end;
+
+ delay *= freq;
+
+ asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
+ for (;;) {
+ asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
+ if ((end - start) > delay)
+ break;
+ }
+}
+
+static int __secure secure_waitbits(u32 reg, u32 mask, u32 val)
+{
+ u32 freq = cp15_read_cntfrq() / 1000000;
+ u32 delay = 500 * freq; /* 500 us */
+ u64 start, end;
+ u32 tmp;
+
+ asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
+ for (;;) {
+ tmp = readl(reg);
+ tmp &= mask;
+ if ((tmp & val) == val)
+ return 0;
+ asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
+ if ((end - start) > delay)
+ return -ETIMEDOUT;
+ }
+}
+
+static void __secure ddr_sr_mode_ssr(u32 *saved_pwrctl)
+{
+ setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
+ RCC_DDRITFCR_DDRC1LPEN | RCC_DDRITFCR_DDRC1EN |
+ RCC_DDRITFCR_DDRC2LPEN | RCC_DDRITFCR_DDRC2EN |
+ RCC_DDRITFCR_DDRCAPBLPEN | RCC_DDRITFCR_DDRPHYCAPBLPEN |
+ RCC_DDRITFCR_DDRCAPBEN | RCC_DDRITFCR_DDRPHYCAPBEN |
+ RCC_DDRITFCR_DDRPHYCEN);
+
+ clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
+ RCC_DDRITFCR_AXIDCGEN | RCC_DDRITFCR_DDRCKMOD_MASK);
+
+ /* Disable HW LP interface of uMCTL2 */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_HWLPCTL,
+ DDRCTRL_HWLPCTL_HW_LP_EN);
+
+ /* Configure Automatic LP modes of uMCTL2 */
+ clrsetbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRTMG,
+ DDRCTRL_PWRTMG_SELFREF_TO_X32_MASK,
+ DDRCTRL_PWRTMG_SELFREF_TO_X32_0);
+
+ /* Save PWRCTL register to restart ASR after suspend (if applicable) */
+ *saved_pwrctl = readl(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL);
+
+ /*
+ * Disable Clock disable with LP modes
+ * (used in RUN mode for LPDDR2 with specific timing).
+ */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL,
+ DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE);
+
+ /* Disable automatic Self-Refresh mode */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL,
+ DDRCTRL_PWRCTL_SELFREF_EN);
+}
+
+static void __secure ddr_sr_mode_restore(u32 saved_pwrctl)
+{
+ saved_pwrctl &= DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE |
+ DDRCTRL_PWRCTL_SELFREF_EN;
+
+ /* Restore ASR mode in case it was enabled before suspend. */
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL, saved_pwrctl);
+}
+
+static int __secure ddr_sw_self_refresh_in(void)
+{
+ int ret;
+
+ clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);
+
+ /* Blocks AXI ports from taking anymore transactions */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_0,
+ DDRCTRL_PCTRL_N_PORT_EN);
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_1,
+ DDRCTRL_PCTRL_N_PORT_EN);
+
+ /*
+ * Waits unit all AXI ports are idle
+ * Poll PSTAT.rd_port_busy_n = 0
+ * Poll PSTAT.wr_port_busy_n = 0
+ */
+ ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_PSTAT,
+ DDRCTRL_PSTAT_RD_PORT_BUSY_0 |
+ DDRCTRL_PSTAT_RD_PORT_BUSY_1 |
+ DDRCTRL_PSTAT_WR_PORT_BUSY_0 |
+ DDRCTRL_PSTAT_WR_PORT_BUSY_1, 0);
+ if (ret)
+ goto pstat_failed;
+
+ /* SW Self-Refresh entry */
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL, DDRCTRL_PWRCTL_SELFREF_SW);
+
+ /*
+ * Wait operating mode change in self-refresh mode
+ * with STAT.operating_mode[1:0]==11.
+ * Ensure transition to self-refresh was due to software
+ * by checking also that STAT.selfref_type[1:0]=2.
+ */
+ ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_STAT,
+ DDRCTRL_STAT_OPERATING_MODE_MASK |
+ DDRCTRL_STAT_SELFREF_TYPE_MASK,
+ DDRCTRL_STAT_OPERATING_MODE_SR |
+ DDRCTRL_STAT_SELFREF_TYPE_SR);
+ if (ret)
+ goto selfref_sw_failed;
+
+ /* IOs powering down (PUBL registers) */
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACPDD);
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACPDR);
+
+ clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR,
+ DDRPHYC_ACIOCR_CKPDD_MASK,
+ DDRPHYC_ACIOCR_CKPDD_0);
+
+ clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR,
+ DDRPHYC_ACIOCR_CKPDR_MASK,
+ DDRPHYC_ACIOCR_CKPDR_0);
+
+ clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR,
+ DDRPHYC_ACIOCR_CSPDD_MASK,
+ DDRPHYC_ACIOCR_CSPDD_0);
+
+ /* Disable command/address output driver */
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACOE);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDD);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDR);
+
+ clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR,
+ DDRPHYC_DSGCR_ODTPDD_MASK,
+ DDRPHYC_DSGCR_ODTPDD_0);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_NL2PD);
+
+ clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR,
+ DDRPHYC_DSGCR_CKEPDD_MASK,
+ DDRPHYC_DSGCR_CKEPDD_0);
+
+ /* Disable PZQ cell (PUBL register) */
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ZQ0CR0, DDRPHYC_ZQ0CRN_ZQPD);
+
+ /* Set latch */
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_CKOE);
+
+ /* Additional delay to avoid early latch */
+ secure_udelay(10);
+
+ /* Activate sw retention in PWRCTRL */
+ setbits_le32(STM32_PWR_BASE + PWR_CR3, PWR_CR3_DDRRETEN);
+
+ /* Switch controller clocks (uMCTL2/PUBL) to DLL ref clock */
+ setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
+
+ /* Disable all DLLs: GLITCH window */
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR, DDRPHYC_ACDLLCR_DLLDIS);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX0DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX1DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX2DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX3DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ /* Switch controller clocks (uMCTL2/PUBL) to DLL output clock */
+ clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
+
+ /* Deactivate all DDR clocks */
+ clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
+ RCC_DDRITFCR_DDRC1EN | RCC_DDRITFCR_DDRC2EN |
+ RCC_DDRITFCR_DDRCAPBEN | RCC_DDRITFCR_DDRPHYCAPBEN);
+
+ return 0;
+
+selfref_sw_failed:
+ /* This bit should be cleared to restore DDR in its previous state */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL,
+ DDRCTRL_PWRCTL_SELFREF_SW);
+
+pstat_failed:
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_0,
+ DDRCTRL_PCTRL_N_PORT_EN);
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_1,
+ DDRCTRL_PCTRL_N_PORT_EN);
+
+ return -EINVAL;
+};
+
+static void __secure ddr_sw_self_refresh_exit(void)
+{
+ int ret;
+
+ /* Enable all clocks */
+ setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
+ RCC_DDRITFCR_DDRC1EN | RCC_DDRITFCR_DDRC2EN |
+ RCC_DDRITFCR_DDRPHYCEN | RCC_DDRITFCR_DDRPHYCAPBEN |
+ RCC_DDRITFCR_DDRCAPBEN);
+
+ /* Handshake */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
+
+ /* Mask dfi_init_complete_en */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_DFIMISC,
+ DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
+
+ /* Ack */
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
+ ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_SWSTAT,
+ DDRCTRL_SWSTAT_SW_DONE_ACK,
+ DDRCTRL_SWSTAT_SW_DONE_ACK);
+ if (ret)
+ hang();
+
+ /* Switch controller clocks (uMCTL2/PUBL) to DLL ref clock */
+ setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
+
+ /* Enable all DLLs: GLITCH window */
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR,
+ DDRPHYC_ACDLLCR_DLLDIS);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX0DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX1DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX2DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX3DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
+
+ /* Additional delay to avoid early DLL clock switch */
+ secure_udelay(50);
+
+ /* Switch controller clocks (uMCTL2/PUBL) to DLL ref clock */
+ clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR, DDRPHYC_ACDLLCR_DLLSRST);
+
+ secure_udelay(10);
+
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR, DDRPHYC_ACDLLCR_DLLSRST);
+
+ /* PHY partial init: (DLL lock and ITM reset) */
+ writel(DDRPHYC_PIR_DLLSRST | DDRPHYC_PIR_DLLLOCK |
+ DDRPHYC_PIR_ITMSRST | DDRPHYC_PIR_INIT,
+ STM32_DDRPHYC_BASE + DDRPHYC_PIR);
+
+ /* Need to wait at least 10 clock cycles before accessing PGSR */
+ secure_udelay(1);
+
+ /* Pool end of init */
+ ret = secure_waitbits(STM32_DDRPHYC_BASE + DDRPHYC_PGSR,
+ DDRPHYC_PGSR_IDONE, DDRPHYC_PGSR_IDONE);
+ if (ret)
+ hang();
+
+ /* Handshake */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
+
+ /* Unmask dfi_init_complete_en to uMCTL2 */
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_DFIMISC, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
+
+ /* Ack */
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
+ ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_SWSTAT,
+ DDRCTRL_SWSTAT_SW_DONE_ACK,
+ DDRCTRL_SWSTAT_SW_DONE_ACK);
+ if (ret)
+ hang();
+
+ /* Deactivate sw retention in PWR */
+ clrbits_le32(STM32_PWR_BASE + PWR_CR3, PWR_CR3_DDRRETEN);
+
+ /* Enable PZQ cell (PUBL register) */
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ZQ0CR0, DDRPHYC_ZQ0CRN_ZQPD);
+
+ /* Enable pad drivers */
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACPDD);
+
+ /* Enable command/address output driver */
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACOE);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_CKPDD_MASK);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_CSPDD_MASK);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDD);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDR);
+
+ /* Release latch */
+ setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_CKOE);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_ODTPDD_MASK);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_NL2PD);
+
+ clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_CKEPDD_MASK);
+
+ /* Remove selfrefresh */
+ clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL, DDRCTRL_PWRCTL_SELFREF_SW);
+
+ /* Wait operating_mode == normal */
+ ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_STAT,
+ DDRCTRL_STAT_OPERATING_MODE_MASK,
+ DDRCTRL_STAT_OPERATING_MODE_NORMAL);
+ if (ret)
+ hang();
+
+ /* AXI ports are no longer blocked from taking transactions */
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_0, DDRCTRL_PCTRL_N_PORT_EN);
+ setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_1, DDRCTRL_PCTRL_N_PORT_EN);
+
+ setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);
+}
+
+void __secure psci_system_suspend(u32 __always_unused function_id,
+ u32 ep, u32 context_id)
+{
+ u32 saved_pwrctl, reg;
+
+ /* Disable IO compensation */
+
+ /* Place current APSRC/ANSRC into RAPSRC/RANSRC */
+ reg = readl(STM32_SYSCFG_BASE + SYSCFG_CMPCR);
+ reg >>= 8;
+ reg &= 0xff << 16;
+ reg |= SYSCFG_CMPCR_SW_CTRL;
+ writel(reg, STM32_SYSCFG_BASE + SYSCFG_CMPCR);
+ writel(SYSCFG_CMPENR_MPUEN, STM32_SYSCFG_BASE + SYSCFG_CMPENCLRR);
+
+ writel(RCC_MP_CIFR_WKUPF, STM32_RCC_BASE + RCC_MP_CIFR);
+ setbits_le32(STM32_RCC_BASE + RCC_MP_CIER, RCC_MP_CIFR_WKUPF);
+
+ setbits_le32(STM32_PWR_BASE + PWR_MPUCR,
+ PWR_MPUCR_CSSF | PWR_MPUCR_CSTDBYDIS | PWR_MPUCR_PDDS);
+
+ psci_v7_flush_dcache_all();
+ ddr_sr_mode_ssr(&saved_pwrctl);
+ ddr_sw_self_refresh_in();
+ setbits_le32(STM32_PWR_BASE + PWR_CR3, PWR_CR3_DDRSREN);
+ writel(0x3, STM32_RCC_BASE + RCC_MP_SREQSETR);
+
+ /* Zzz, enter stop mode */
+ asm volatile(
+ "isb\n"
+ "dsb\n"
+ "wfi\n");
+
+ writel(0x3, STM32_RCC_BASE + RCC_MP_SREQCLRR);
+ ddr_sw_self_refresh_exit();
+ ddr_sr_mode_restore(saved_pwrctl);
+
+ writel(SYSCFG_CMPENR_MPUEN, STM32_SYSCFG_BASE + SYSCFG_CMPENSETR);
+ clrbits_le32(STM32_SYSCFG_BASE + SYSCFG_CMPCR, SYSCFG_CMPCR_SW_CTRL);
+}
--
2.34.1
More information about the U-Boot
mailing list