[PATCH 1/2] ARM: imx: imx8mn-*-evk: use reset-gpios in phy node

[Marek Vasut]

On 2/23/22 10:48, Heiko Thiery wrote:
> To be in sync with the linux devicetree change the 'phy-reset-gpios' in
> the fec node to 'reset-gpios' in the phy node. The PHY reset will be
> done by the eth-phy-uclass driver while probing the PHY. This is ok
> since it is done before probing the fec.
> 
> Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>

Tested-by: Marek Vasut <marex at denx.de> # 8MNANOD4-EVK