[PATCH 1/2] ARM: imx: imx8mn-*-evk: use reset-gpios in phy node

[Fabio Estevam]

On Wed, Feb 23, 2022 at 6:48 AM Heiko Thiery <heiko.thiery at gmail.com> wrote:
>
> To be in sync with the linux devicetree change the 'phy-reset-gpios' in
> the fec node to 'reset-gpios' in the phy node. The PHY reset will be
> done by the eth-phy-uclass driver while probing the PHY. This is ok
> since it is done before probing the fec.
>
> Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>

Reviewed-by: Fabio Estevam <festevam at gmail.com>