[PATCH] arm: kirkwood: iConnect : Add Ethernet support

Stefan Roese sr at denx.de
Thu Feb 10 09:18:32 CET 2022


On 2/2/22 06:59, Tony Dinh wrote:
> - Currently, CONFIG_RESET_PHY_R symbol is used in
> arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
> boards with mv8831116 PHY, with each board defines the function
> reset_phy(). Undefine it for this board.
> - Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
> to bring up Ethernet.
> - Miscellaneous changes: Move constants to .c file and remove header file
> board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
> and cleanup comments.
> 
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
> 
>   board/iomega/iconnect/iconnect.c | 17 ++++++++++++++---
>   board/iomega/iconnect/iconnect.h | 24 ------------------------
>   configs/iconnect_defconfig       |  6 +++++-
>   include/configs/iconnect.h       | 21 +++++++--------------
>   4 files changed, 26 insertions(+), 42 deletions(-)
>   delete mode 100644 board/iomega/iconnect/iconnect.h
> 
> diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
> index 9e123aab00..0387160200 100644
> --- a/board/iomega/iconnect/iconnect.c
> +++ b/board/iomega/iconnect/iconnect.c
> @@ -1,5 +1,6 @@
>   // SPDX-License-Identifier: GPL-2.0+
>   /*
> + * Copyright (C) 2022 Tony Dinh <mibodhi at gmail.com>
>    * Copyright (C) 2009-2012
>    * Wojciech Dubowik <wojciech.dubowik at neratec.com>
>    * Luka Perkov <luka at openwrt.org>
> @@ -7,15 +8,20 @@
>   
>   #include <common.h>
>   #include <init.h>
> -#include <miiphy.h>
> +#include <netdev.h>
>   #include <asm/arch/cpu.h>
>   #include <asm/arch/soc.h>
>   #include <asm/arch/mpp.h>
>   #include <asm/global_data.h>
> -#include "iconnect.h"
> +#include <linux/bitops.h>
>   
>   DECLARE_GLOBAL_DATA_PTR;
>   
> +#define ICONNECT_OE_LOW                 (~BIT(7))
> +#define ICONNECT_OE_HIGH                (~BIT(10))
> +#define ICONNECT_OE_VAL_LOW             (0)
> +#define ICONNECT_OE_VAL_HIGH            BIT(10)
> +
>   int board_early_init_f(void)
>   {
>   	/*
> @@ -85,9 +91,14 @@ int board_early_init_f(void)
>   	return 0;
>   }
>   
> +int board_eth_init(struct bd_info *bis)
> +{
> +	return cpu_eth_init(bis);
> +}
> +
>   int board_init(void)
>   {
> -	/* adress of boot parameters */
> +	/* address of boot parameters */
>   	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
>   
>   	return 0;
> diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
> deleted file mode 100644
> index 4f0be71918..0000000000
> --- a/board/iomega/iconnect/iconnect.h
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2009-2012
> - * Wojciech Dubowik <wojciech.dubowik at neratec.com>
> - * Luka Perkov <luka at openwrt.org>
> - */
> -
> -#ifndef __ICONNECT_H
> -#define __ICONNECT_H
> -
> -#define ICONNECT_OE_LOW			(~(1 << 7))
> -#define ICONNECT_OE_HIGH		(~(1 << 10))
> -#define ICONNECT_OE_VAL_LOW		(0)
> -#define ICONNECT_OE_VAL_HIGH		(1 << 10)
> -
> -/* PHY related */
> -#define MV88E1116_LED_FCTRL_REG		10
> -#define MV88E1116_CPRSP_CR3_REG		21
> -#define MV88E1116_MAC_CTRL_REG		21
> -#define MV88E1116_PGADR_REG		22
> -#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
> -#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
> -
> -#endif /* __ICONNECT_H */
> diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
> index 1c9c77a292..336fae270a 100644
> --- a/configs/iconnect_defconfig
> +++ b/configs/iconnect_defconfig
> @@ -20,7 +20,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi
>   CONFIG_USE_PREBOOT=y
>   # CONFIG_DISPLAY_BOARDINFO is not set
>   CONFIG_BOARD_LATE_INIT=y
> -CONFIG_SYS_PROMPT="iconnect => "
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="iConnect> "
>   # CONFIG_CMD_FLASH is not set
>   CONFIG_CMD_NAND=y
>   CONFIG_CMD_PCI=y
> @@ -39,11 +40,14 @@ CONFIG_OF_CONTROL=y
>   CONFIG_ENV_OVERWRITE=y
>   CONFIG_ENV_IS_IN_NAND=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
>   CONFIG_NETCONSOLE=y
>   CONFIG_DM=y
>   # CONFIG_MMC is not set
>   CONFIG_MTD=y
>   CONFIG_MTD_RAW_NAND=y
> +CONFIG_PHY_MARVELL=y
> +CONFIG_DM_ETH=y
>   CONFIG_MVGBE=y
>   CONFIG_MII=y
>   CONFIG_PCI=y
> diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
> index f1aad1efde..44a4b4409f 100644
> --- a/include/configs/iconnect.h
> +++ b/include/configs/iconnect.h
> @@ -1,5 +1,6 @@
>   /* SPDX-License-Identifier: GPL-2.0+ */
>   /*
> + * Copyright (C) 2022 Tony Dinh <mibodhi at gmail.com>
>    * (C) Copyright 2009-2012
>    * Wojciech Dubowik <wojciech.dubowik at neratec.com>
>    * Luka Perkov <luka at openwrt.org>
> @@ -10,32 +11,24 @@
>   
>   #include "mv-common.h"
>   
> -/*
> - * Environment variables configuration
> - */
> -
> -/*
> - * Default environment variables
> - */
> -
>   #define CONFIG_EXTRA_ENV_SETTINGS \
>   	"console=console=ttyS0,115200\0"	\
>   	"mtdids=nand0=orion_nand\0"		\
> -	"mtdparts="CONFIG_MTDPARTS_DEFAULT	\
> +	"mtdparts=" CONFIG_MTDPARTS_DEFAULT	\
>   	"kernel=/boot/uImage\0"			\
>   	"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
>   
>   /*
>    * Ethernet driver configuration
> + *
> + * This board has PCIe Wifi card, so allow Ethernet to be disabled
>    */
>   #ifdef CONFIG_CMD_NET
>   #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
>   #define CONFIG_PHY_BASE_ADR	11
> -#undef CONFIG_RESET_PHY_R
> +#ifdef CONFIG_RESET_PHY_R
> +#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
> +#endif
>   #endif /* CONFIG_CMD_NET */
>   
> -/*
> - * File system
> - */
> -
>   #endif /* _CONFIG_ICONNECT_H */

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list