[PATCH] arm: dts: stm32mp15: alignment with v5.17

Patrice CHOTARD patrice.chotard at foss.st.com
Wed Feb 23 10:05:04 CET 2022


Hi Patrick

On 1/31/22 16:07, Patrick Delaunay wrote:
> Device tree alignment with Linux kernel v5.17-rc1
> - ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins
>   on STM32MP15 DKx boards
> - ARM: dts: stm32: clean uart4_idle_pins_a node for stm32mp15
> - ARM: dts: stm32: tune the HS USB PHYs on stm32mp15xx-dkx
> - ARM: dts: stm32: tune the HS USB PHYs on stm32mp157c-ev1
> - ARM: dts: stm32: fix stusb1600 pinctrl used on stm32mp157c-dk
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/dts/stm32mp15-pinctrl.dtsi | 32 ++++++++++++++---------------
>  arch/arm/dts/stm32mp157c-ev1.dts    | 22 ++++++++++++++++++++
>  arch/arm/dts/stm32mp15xx-dkx.dtsi   | 16 +++++++++++++++
>  3 files changed, 54 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> index d3553e0f01..6161f5906e 100644
> --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
> @@ -1718,7 +1718,7 @@
>  
>  	stusb1600_pins_a: stusb1600-0 {
>  		pins {
> -			pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
> +			pinmux = <STM32_PINMUX('I', 11, GPIO)>;
>  			bias-pull-up;
>  		};
>  	};
> @@ -1737,20 +1737,20 @@
>  	};
>  
>  	uart4_idle_pins_a: uart4-idle-0 {
> -		   pins1 {
> -			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
> -		   };
> -		   pins2 {
> -			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> -			 bias-disable;
> -		   };
> +		pins1 {
> +			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> +			bias-disable;
> +		};
>  	};
>  
>  	uart4_sleep_pins_a: uart4-sleep-0 {
> -		   pins {
> +		pins {
>  			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
>  				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
> -		    };
> +		};
>  	};
>  
>  	uart4_pins_b: uart4-1 {
> @@ -1816,7 +1816,7 @@
>  		};
>  		pins2 {
>  			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
> -			bias-disable;
> +			bias-pull-up;
>  		};
>  	};
>  
> @@ -1826,7 +1826,7 @@
>  		};
>  		pins2 {
>  			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
> -			bias-disable;
> +			bias-pull-up;
>  		};
>  	};
>  
> @@ -1971,7 +1971,7 @@
>  		pins2 {
>  			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
>  				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
> -			bias-disable;
> +			bias-pull-up;
>  		};
>  	};
>  
> @@ -1988,7 +1988,7 @@
>  		};
>  		pins3 {
>  			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
> -			bias-disable;
> +			bias-pull-up;
>  		};
>  	};
>  
> @@ -2012,7 +2012,7 @@
>  		pins2 {
>  			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
>  				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
> -			bias-disable;
> +			bias-pull-up;
>  		};
>  	};
>  
> @@ -2029,7 +2029,7 @@
>  		};
>  		pins3 {
>  			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
> -			bias-disable;
> +			bias-pull-up;
>  		};
>  	};
>  
> diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
> index 5c5b1ddf7b..e222d2d2cb 100644
> --- a/arch/arm/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/dts/stm32mp157c-ev1.dts
> @@ -375,3 +375,25 @@
>  &usbphyc {
>  	status = "okay";
>  };
> +
> +&usbphyc_port0 {
> +	st,tune-hs-dc-level = <2>;
> +	st,enable-fs-rftime-tuning;
> +	st,enable-hs-rftime-reduction;
> +	st,trim-hs-current = <15>;
> +	st,trim-hs-impedance = <1>;
> +	st,tune-squelch-level = <3>;
> +	st,tune-hs-rx-offset = <2>;
> +	st,no-lsfs-sc;
> +};
> +
> +&usbphyc_port1 {
> +	st,tune-hs-dc-level = <2>;
> +	st,enable-fs-rftime-tuning;
> +	st,enable-hs-rftime-reduction;
> +	st,trim-hs-current = <15>;
> +	st,trim-hs-impedance = <1>;
> +	st,tune-squelch-level = <3>;
> +	st,tune-hs-rx-offset = <2>;
> +	st,no-lsfs-sc;
> +};
> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> index 5502eec94b..f8130bf445 100644
> --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> @@ -702,10 +702,26 @@
>  
>  &usbphyc_port0 {
>  	phy-supply = <&vdd_usb>;
> +	st,tune-hs-dc-level = <2>;
> +	st,enable-fs-rftime-tuning;
> +	st,enable-hs-rftime-reduction;
> +	st,trim-hs-current = <15>;
> +	st,trim-hs-impedance = <1>;
> +	st,tune-squelch-level = <3>;
> +	st,tune-hs-rx-offset = <2>;
> +	st,no-lsfs-sc;
>  };
>  
>  &usbphyc_port1 {
>  	phy-supply = <&vdd_usb>;
> +	st,tune-hs-dc-level = <2>;
> +	st,enable-fs-rftime-tuning;
> +	st,enable-hs-rftime-reduction;
> +	st,trim-hs-current = <15>;
> +	st,trim-hs-impedance = <1>;
> +	st,tune-squelch-level = <3>;
> +	st,tune-hs-rx-offset = <2>;
> +	st,no-lsfs-sc;
>  };
>  
>  &vrefbuf {


Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice


More information about the U-Boot mailing list