[PATCH 1/7] k210: use the board vendor name rather than the marketing name
Niklas Cassel
Niklas.Cassel at wdc.com
Tue Feb 15 17:16:35 CET 2022
From: Damien Le Moal <damien.lemoal at opensource.wdc.com>
"kendryte" is the marketing name for the K210 RISC-V SoC produced by
Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210"
vendor,SoC compatibility string format in the device tree files and
use the SoC name for file names.
With these changes, the device tree files are more in sync with the
Linux kernel DTS and drivers, making uboot device tree usable by the
kernel.
Signed-off-by: Damien Le Moal <damien.lemoal at opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel at wdc.com>
---
MAINTAINERS | 10 +-
arch/riscv/dts/k210-maix-bit.dts | 3 +-
arch/riscv/dts/k210.dtsi | 98 +++++++++----------
board/sipeed/maix/maix.c | 2 +-
...k210-sysctl.txt => canaan,k210-sysctl.txt} | 8 +-
...e,k210-fpioa.txt => canaan,k210-fpioa.txt} | 12 +--
.../spi/snps,dw-apb-ssi.txt | 4 +-
drivers/clk/Makefile | 2 +-
drivers/clk/{clk_kendryte.c => clk_k210.c} | 4 +-
drivers/pinctrl/Makefile | 2 +-
.../{pinctrl-kendryte.c => pinctrl-k210.c} | 6 +-
drivers/spi/designware_spi.c | 4 +-
include/configs/sipeed-maix.h | 2 +-
include/{kendryte => k210}/pll.h | 0
test/dm/k210_pll.c | 2 +-
15 files changed, 80 insertions(+), 79 deletions(-)
rename doc/device-tree-bindings/mfd/{kendryte,k210-sysctl.txt => canaan,k210-sysctl.txt} (78%)
rename doc/device-tree-bindings/pinctrl/{kendryte,k210-fpioa.txt => canaan,k210-fpioa.txt} (91%)
rename drivers/clk/{clk_kendryte.c => clk_k210.c} (99%)
rename drivers/pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} (98%)
rename include/{kendryte => k210}/pll.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c98029754..6347b57d67 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1117,11 +1117,11 @@ F: tools/prelink-riscv.c
RISC-V KENDRYTE
M: Sean Anderson <seanga2 at gmail.com>
S: Maintained
-F: doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
-F: doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
-F: drivers/clk/clk_kendryte.c
-F: drivers/pinctrl/pinctrl-kendryte.c
-F: include/kendryte/
+F: doc/device-tree-bindings/mfd/canaan,k210-sysctl.txt
+F: doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
+F: drivers/clk/clk_k210.c
+F: drivers/pinctrl/pinctrl-k210.c
+F: include/k210/
RNG
M: Sughosh Ganu <sughosh.ganu at linaro.org>
diff --git a/arch/riscv/dts/k210-maix-bit.dts b/arch/riscv/dts/k210-maix-bit.dts
index 902dcfd08a..c4bbf6b018 100644
--- a/arch/riscv/dts/k210-maix-bit.dts
+++ b/arch/riscv/dts/k210-maix-bit.dts
@@ -12,7 +12,8 @@
/ {
model = "Sipeed Maix Bit 2.0";
- compatible = "sipeed,maix-bitm", "sipeed,maix-bit", "kendryte,k210";
+ compatible = "sipeed,maix-bitm", "sipeed,maix-bit",
+ "canaan,kendryte-k210";
chosen {
stdout-path = "serial0:115200";
diff --git a/arch/riscv/dts/k210.dtsi b/arch/riscv/dts/k210.dtsi
index 8bcd3cebde..7dc2785a3e 100644
--- a/arch/riscv/dts/k210.dtsi
+++ b/arch/riscv/dts/k210.dtsi
@@ -15,7 +15,7 @@
*/
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210";
+ compatible = "canaan,kendryte-k210";
aliases {
cpu0 = &cpu0;
@@ -46,7 +46,7 @@
timebase-frequency = <7800000>;
cpu0: cpu at 0 {
device_type = "cpu";
- compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+ compatible = "canaan,k210", "sifive,rocket0", "riscv";
reg = <0>;
riscv,isa = "rv64imafdgc";
mmu-type = "sv39";
@@ -63,7 +63,7 @@
};
cpu1: cpu at 1 {
device_type = "cpu";
- compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+ compatible = "canaan,k210", "sifive,rocket0", "riscv";
reg = <1>;
riscv,isa = "rv64imafdgc";
mmu-type = "sv39";
@@ -82,7 +82,7 @@
sram: memory at 80000000 {
device_type = "memory";
- compatible = "kendryte,k210-sram";
+ compatible = "canaan,k210-sram";
reg = <0x80000000 0x400000>,
<0x80400000 0x200000>,
<0x80600000 0x200000>;
@@ -106,12 +106,12 @@
soc {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210-soc", "simple-bus";
+ compatible = "canaan,k210-soc", "simple-bus";
ranges;
interrupt-parent = <&plic0>;
debug0: debug at 0 {
- compatible = "kendryte,k210-debug", "riscv,debug";
+ compatible = "canaan,k210-debug", "riscv,debug";
reg = <0x0 0x1000>;
};
@@ -122,7 +122,7 @@
clint0: clint at 2000000 {
#interrupt-cells = <1>;
- compatible = "kendryte,k210-clint", "riscv,clint0";
+ compatible = "canaan,k210-clint", "sifive,clint0", "riscv,clint0";
reg = <0x2000000 0xC000>;
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
<&cpu1_intc 3>, <&cpu1_intc 7>;
@@ -131,7 +131,7 @@
plic0: interrupt-controller at C000000 {
#interrupt-cells = <1>;
- compatible = "kendryte,k210-plic", "riscv,plic0";
+ compatible = "canaan,k210-plic", "sifive,plic-1.0.0", "riscv,plic0";
reg = <0xC000000 0x4000000>;
interrupt-controller;
interrupts-extended = <&cpu0_intc 9>, <&cpu0_intc 11>,
@@ -141,7 +141,7 @@
};
uarths0: serial at 38000000 {
- compatible = "kendryte,k210-uarths", "sifive,uart0";
+ compatible = "canaan,k210-uarths", "sifive,uart0";
reg = <0x38000000 0x1000>;
interrupts = <33>;
clocks = <&sysclk K210_CLK_CPU>;
@@ -151,7 +151,7 @@
gpio0: gpio-controller at 38001000 {
#interrupt-cells = <2>;
#gpio-cells = <2>;
- compatible = "kendryte,k210-gpiohs", "sifive,gpio0";
+ compatible = "canaan,k210-gpiohs", "sifive,gpio0";
reg = <0x38001000 0x1000>;
interrupt-controller;
interrupts = <34 35 36 37 38 39 40 41
@@ -164,7 +164,7 @@
};
kpu0: kpu at 40800000 {
- compatible = "kendryte,k210-kpu";
+ compatible = "canaan,k210-kpu";
reg = <0x40800000 0xc00000>;
interrupts = <25>;
clocks = <&sysclk K210_CLK_AI>;
@@ -172,7 +172,7 @@
};
fft0: fft at 42000000 {
- compatible = "kendryte,k210-fft";
+ compatible = "canaan,k210-fft";
reg = <0x42000000 0x400000>;
interrupts = <26>;
clocks = <&sysclk K210_CLK_FFT>;
@@ -181,7 +181,7 @@
};
dmac0: dma-controller at 50000000 {
- compatible = "kendryte,k210-dmac", "snps,axi-dma-1.01a";
+ compatible = "canaan,k210-dmac", "snps,axi-dma-1.01a";
reg = <0x50000000 0x1000>;
interrupts = <27 28 29 30 31 32>;
clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
@@ -199,14 +199,14 @@
apb0: bus at 50200000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210-apb", "simple-pm-bus";
+ compatible = "canaan,k210-apb", "simple-pm-bus";
ranges;
clocks = <&sysclk K210_CLK_APB0>;
gpio1: gpio-controller at 50200000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "kendryte,k210-gpio",
+ compatible = "canaan,k210-gpio",
"snps,dw-apb-gpio";
reg = <0x50200000 0x80>;
clocks = <&sysclk K210_CLK_GPIO>;
@@ -226,7 +226,7 @@
};
uart1: serial at 50210000 {
- compatible = "kendryte,k210-uart",
+ compatible = "canaan,k210-uart",
"snps,dw-apb-uart";
reg = <0x50210000 0x100>;
interrupts = <11>;
@@ -242,7 +242,7 @@
};
uart2: serial at 50220000 {
- compatible = "kendryte,k210-uart",
+ compatible = "canaan,k210-uart",
"snps,dw-apb-uart";
reg = <0x50220000 0x100>;
interrupts = <12>;
@@ -258,7 +258,7 @@
};
uart3: serial at 50230000 {
- compatible = "kendryte,k210-uart",
+ compatible = "canaan,k210-uart",
"snps,dw-apb-uart";
reg = <0x50230000 0x100>;
interrupts = <13>;
@@ -274,7 +274,7 @@
};
spi2: spi at 50240000 {
- compatible = "canaan,kendryte-k210-spi",
+ compatible = "canaan,k210-spi",
"snps,dw-apb-ssi-4.01",
"snps,dw-apb-ssi";
spi-slave;
@@ -287,7 +287,7 @@
};
i2s0: i2s at 50250000 {
- compatible = "kendryte,k210-i2s",
+ compatible = "canaan,k210-i2s",
"snps,designware-i2s";
reg = <0x50250000 0x200>;
interrupts = <5>;
@@ -298,13 +298,13 @@
};
apu0: sound at 520250200 {
- compatible = "kendryte,k210-apu";
+ compatible = "canaan,k210-apu";
reg = <0x50250200 0x200>;
status = "disabled";
};
i2s1: i2s at 50260000 {
- compatible = "kendryte,k210-i2s",
+ compatible = "canaan,k210-i2s",
"snps,designware-i2s";
reg = <0x50260000 0x200>;
interrupts = <6>;
@@ -315,7 +315,7 @@
};
i2s2: i2s at 50270000 {
- compatible = "kendryte,k210-i2s",
+ compatible = "canaan,k210-i2s",
"snps,designware-i2s";
reg = <0x50270000 0x200>;
interrupts = <7>;
@@ -326,7 +326,7 @@
};
i2c0: i2c at 50280000 {
- compatible = "kendryte,k210-i2c",
+ compatible = "canaan,k210-i2c",
"snps,designware-i2c";
reg = <0x50280000 0x100>;
interrupts = <8>;
@@ -336,7 +336,7 @@
};
i2c1: i2c at 50290000 {
- compatible = "kendryte,k210-i2c",
+ compatible = "canaan,k210-i2c",
"snps,designware-i2c";
reg = <0x50290000 0x100>;
interrupts = <9>;
@@ -346,7 +346,7 @@
};
i2c2: i2c at 502A0000 {
- compatible = "kendryte,k210-i2c",
+ compatible = "canaan,k210-i2c",
"snps,designware-i2c";
reg = <0x502A0000 0x100>;
interrupts = <10>;
@@ -356,12 +356,12 @@
};
fpioa: pinmux at 502B0000 {
- compatible = "kendryte,k210-fpioa";
+ compatible = "canaan,k210-fpioa";
reg = <0x502B0000 0x100>;
clocks = <&sysclk K210_CLK_FPIOA>;
resets = <&sysrst K210_RST_FPIOA>;
- kendryte,sysctl = <&sysctl>;
- kendryte,power-offset = <K210_SYSCTL_POWER_SEL>;
+ canaan,k210-sysctl = <&sysctl>;
+ canaan,k210-power-offset = <K210_SYSCTL_POWER_SEL>;
pinctrl-0 = <&fpioa_jtag>;
pinctrl-names = "default";
status = "disabled";
@@ -375,7 +375,7 @@
};
sha256: sha256 at 502C0000 {
- compatible = "kendryte,k210-sha256";
+ compatible = "canaan,k210-sha256";
reg = <0x502C0000 0x100>;
clocks = <&sysclk K210_CLK_SHA>;
resets = <&sysrst K210_RST_SHA>;
@@ -383,7 +383,7 @@
};
timer0: timer at 502D0000 {
- compatible = "kendryte,k210-timer",
+ compatible = "canaan,k210-timer",
"snps,dw-apb-timer";
reg = <0x502D0000 0x100>;
interrupts = <14 15>;
@@ -394,7 +394,7 @@
};
timer1: timer at 502E0000 {
- compatible = "kendryte,k210-timer",
+ compatible = "canaan,k210-timer",
"snps,dw-apb-timer";
reg = <0x502E0000 0x100>;
interrupts = <16 17>;
@@ -405,7 +405,7 @@
};
timer2: timer at 502F0000 {
- compatible = "kendryte,k210-timer",
+ compatible = "canaan,k210-timer",
"snps,dw-apb-timer";
reg = <0x502F0000 0x100>;
interrupts = <18 19>;
@@ -419,12 +419,12 @@
apb1: bus at 50400000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210-apb", "simple-pm-bus";
+ compatible = "canaan,k210-apb", "simple-pm-bus";
ranges;
clocks = <&sysclk K210_CLK_APB1>;
wdt0: watchdog at 50400000 {
- compatible = "kendryte,k210-wdt", "snps,dw-wdt";
+ compatible = "canaan,k210-wdt", "snps,dw-wdt";
reg = <0x50400000 0x100>;
interrupts = <21>;
clocks = <&sysclk K210_CLK_WDT0>;
@@ -432,7 +432,7 @@
};
wdt1: watchdog at 50410000 {
- compatible = "kendryte,k210-wdt", "snps,dw-wdt";
+ compatible = "canaan,k210-wdt", "snps,dw-wdt";
reg = <0x50410000 0x100>;
interrupts = <22>;
clocks = <&sysclk K210_CLK_WDT1>;
@@ -443,7 +443,7 @@
otp0: nvmem at 50420000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210-otp";
+ compatible = "canaan,k210-otp";
reg = <0x50420000 0x100>,
<0x88000000 0x20000>;
reg-names = "reg", "mem";
@@ -480,18 +480,18 @@
};
dvp0: camera at 50430000 {
- compatible = "kendryte,k210-dvp";
+ compatible = "canaan,k210-dvp";
reg = <0x50430000 0x100>;
interrupts = <24>;
clocks = <&sysclk K210_CLK_DVP>;
resets = <&sysrst K210_RST_DVP>;
- kendryte,sysctl = <&sysctl>;
- kendryte,misc-offset = <K210_SYSCTL_MISC>;
+ canaan,k210-sysctl = <&sysctl>;
+ canaan,k210-misc-offset = <K210_SYSCTL_MISC>;
status = "disabled";
};
sysctl: syscon at 50440000 {
- compatible = "kendryte,k210-sysctl",
+ compatible = "canaan,k210-sysctl",
"syscon", "simple-mfd";
reg = <0x50440000 0x100>;
reg-io-width = <4>;
@@ -499,7 +499,7 @@
sysclk: clock-controller {
#clock-cells = <1>;
- compatible = "kendryte,k210-clk";
+ compatible = "canaan,k210-clk";
clocks = <&in0>;
assigned-clocks = <&sysclk K210_CLK_PLL1>;
assigned-clock-rates = <390000000>;
@@ -507,7 +507,7 @@
};
sysrst: reset-controller {
- compatible = "kendryte,k210-rst",
+ compatible = "canaan,k210-rst",
"syscon-reset";
#reset-cells = <1>;
regmap = <&sysctl>;
@@ -526,7 +526,7 @@
};
aes0: aes at 50450000 {
- compatible = "kendryte,k210-aes";
+ compatible = "canaan,k210-aes";
reg = <0x50450000 0x100>;
clocks = <&sysclk K210_CLK_AES>;
resets = <&sysrst K210_RST_AES>;
@@ -534,7 +534,7 @@
};
rtc: rtc at 50460000 {
- compatible = "kendryte,k210-rtc";
+ compatible = "canaan,k210-rtc";
reg = <0x50460000 0x100>;
clocks = <&in0>;
resets = <&sysrst K210_RST_RTC>;
@@ -546,14 +546,14 @@
apb2: bus at 52000000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210-apb", "simple-pm-bus";
+ compatible = "canaan,k210-apb", "simple-pm-bus";
ranges;
clocks = <&sysclk K210_CLK_APB2>;
spi0: spi at 52000000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "canaan,kendryte-k210-spi",
+ compatible = "canaan,k210-spi",
"snps,dw-apb-ssi-4.01",
"snps,dw-apb-ssi";
reg = <0x52000000 0x100>;
@@ -570,7 +570,7 @@
spi1: spi at 53000000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "canaan,kendryte-k210-spi",
+ compatible = "canaan,k210-spi",
"snps,dw-apb-ssi-4.01",
"snps,dw-apb-ssi";
reg = <0x53000000 0x100>;
@@ -587,7 +587,7 @@
spi3: spi at 54000000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "canaan,kendryte-k210-ssi",
+ compatible = "canaan,k210-ssi",
"snps,dwc-ssi-1.01a";
reg = <0x54000000 0x200>;
interrupts = <4>;
diff --git a/board/sipeed/maix/maix.c b/board/sipeed/maix/maix.c
index 52e4fee2f0..a218278cb3 100644
--- a/board/sipeed/maix/maix.c
+++ b/board/sipeed/maix/maix.c
@@ -22,7 +22,7 @@ static int sram_init(void)
struct clk clk;
/* Enable RAM clocks */
- memory = ofnode_by_compatible(ofnode_null(), "kendryte,k210-sram");
+ memory = ofnode_by_compatible(ofnode_null(), "canaan,k210-sram");
if (ofnode_equal(memory, ofnode_null()))
return -ENOENT;
diff --git a/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt b/doc/device-tree-bindings/mfd/canaan,k210-sysctl.txt
similarity index 78%
rename from doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
rename to doc/device-tree-bindings/mfd/canaan,k210-sysctl.txt
index 5b24abcb62..e48b164fc0 100644
--- a/doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
+++ b/doc/device-tree-bindings/mfd/canaan,k210-sysctl.txt
@@ -6,7 +6,7 @@ be reference by other bindings which need a phandle to the K210 sysctl regmap.
Required properties:
- compatible: should be
- "kendryte,k210-sysctl", "syscon", "simple-mfd"
+ "canaan,k210-sysctl", "syscon", "simple-mfd"
- reg: address and length of the sysctl registers
- reg-io-width: must be <4>
@@ -15,18 +15,18 @@ Clock sub-node
This node is a binding for the clock tree driver
Required properties:
-- compatible: should be "kendryte,k210-clk"
+- compatible: should be "canaan,k210-clk"
- clocks: phandle to the "in0" external oscillator
- #clock-cells: must be <1>
Example:
sysctl: syscon at 50440000 {
- compatible = "kendryte,k210-sysctl", "syscon", "simple-mfd";
+ compatible = "canaan,k210-sysctl", "syscon", "simple-mfd";
reg = <0x50440000 0x100>;
reg-io-width = <4>;
sysclk: clock-controller {
- compatible = "kendryte,k210-clk";
+ compatible = "canaan,k210-clk";
clocks = <&in0>;
#clock-cells = <1>;
};
diff --git a/doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt b/doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
similarity index 91%
rename from doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
rename to doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
index 73871f5930..deca0cfab7 100644
--- a/doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
+++ b/doc/device-tree-bindings/pinctrl/canaan,k210-fpioa.txt
@@ -5,10 +5,10 @@ in Kendryte K210 SoCs. Any of the 256 functions can be mapped to any of the 48
pins.
Required properties:
-- compatible: should be "kendryte,k210-fpioa"
+- compatible: should be "canaan,k210-fpioa"
- reg: address and length of the FPIOA registers
-- kendryte,sysctl: phandle to the "sysctl" register map node
-- kendryte,power-offset: offset in the register map of the power bank control
+- canaan,sysctl: phandle to the "sysctl" register map node
+- canaan,k210-power-offset: offset in the register map of the power bank control
register (in bytes)
Configuration nodes
@@ -54,10 +54,10 @@ Notes on specific properties include:
Example:
fpioa: pinmux at 502B0000 {
- compatible = "kendryte,k210-fpioa";
+ compatible = "canaan,k210-fpioa";
reg = <0x502B0000 0x100>;
- kendryte,sysctl = <&sysctl>;
- kendryte,power-offset = <K210_SYSCTL_POWER_SEL>;
+ canaan,k210-sysctl = <&sysctl>;
+ canaan,k210-power-offset = <K210_SYSCTL_POWER_SEL>;
/* JTAG running at 3.3V and driven at 11 mA */
fpioa_jtag: jtag {
diff --git a/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt b/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt
index 8d2888fbe3..7a0f11c53b 100644
--- a/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt
+++ b/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt
@@ -5,8 +5,8 @@ Required properties:
- compatible : One of
"altr,socfpga-spi",
"altr,socfpga-arria10-spi",
- "canaan,kendryte-k210-spi",
- "canaan,kendryte-k210-ssi",
+ "canaan,k210-spi",
+ "canaan,k210-ssi",
"intel,stratix10-spi",
"intel,agilex-spi",
"mscc,ocelot-spi",
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 711ae5bc29..bf7e4904f3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
obj-$(CONFIG_CLK_EXYNOS) += exynos/
obj-$(CONFIG_$(SPL_TPL_)CLK_INTEL) += intel/
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-cgu.o
-obj-$(CONFIG_CLK_K210) += clk_kendryte.o
+obj-$(CONFIG_CLK_K210) += clk_k210.o
obj-$(CONFIG_CLK_MPC83XX) += mpc83xx_clk.o
obj-$(CONFIG_CLK_MPFS) += microchip/
obj-$(CONFIG_CLK_OCTEON) += clk_octeon.o
diff --git a/drivers/clk/clk_kendryte.c b/drivers/clk/clk_k210.c
similarity index 99%
rename from drivers/clk/clk_kendryte.c
rename to drivers/clk/clk_k210.c
index 97efda5b6f..1961efaa5e 100644
--- a/drivers/clk/clk_kendryte.c
+++ b/drivers/clk/clk_k210.c
@@ -14,7 +14,7 @@
#include <serial.h>
#include <dt-bindings/clock/k210-sysctl.h>
#include <dt-bindings/mfd/k210-sysctl.h>
-#include <kendryte/pll.h>
+#include <k210/pll.h>
#include <linux/bitfield.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -1271,7 +1271,7 @@ static int k210_clk_probe(struct udevice *dev)
}
static const struct udevice_id k210_clk_ids[] = {
- { .compatible = "kendryte,k210-clk" },
+ { .compatible = "canaan,k210-clk" },
{ },
};
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index fd736a7f64..df37c32033 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
obj-$(CONFIG_PINCTRL_PIC32) += pinctrl_pic32.o
obj-$(CONFIG_PINCTRL_EXYNOS) += exynos/
-obj-$(CONFIG_PINCTRL_K210) += pinctrl-kendryte.o
+obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o
obj-$(CONFIG_PINCTRL_MESON) += meson/
obj-$(CONFIG_PINCTRL_MTK) += mediatek/
obj-$(CONFIG_PINCTRL_MSCC) += mscc/
diff --git a/drivers/pinctrl/pinctrl-kendryte.c b/drivers/pinctrl/pinctrl-k210.c
similarity index 98%
rename from drivers/pinctrl/pinctrl-kendryte.c
rename to drivers/pinctrl/pinctrl-k210.c
index 09d51ca676..bb5153c673 100644
--- a/drivers/pinctrl/pinctrl-kendryte.c
+++ b/drivers/pinctrl/pinctrl-k210.c
@@ -692,13 +692,13 @@ static int k210_pc_probe(struct udevice *dev)
if (ret && ret != -ENOSYS && ret != -ENOTSUPP)
goto err;
- priv->sysctl = syscon_regmap_lookup_by_phandle(dev, "kendryte,sysctl");
+ priv->sysctl = syscon_regmap_lookup_by_phandle(dev, "canaan,k210-sysctl");
if (IS_ERR(priv->sysctl)) {
ret = -ENODEV;
goto err;
}
- ret = dev_read_u32(dev, "kendryte,power-offset", &priv->power_offset);
+ ret = dev_read_u32(dev, "canaan,k210-power-offset", &priv->power_offset);
if (ret)
goto err;
@@ -726,7 +726,7 @@ err:
}
static const struct udevice_id k210_pc_ids[] = {
- { .compatible = "kendryte,k210-fpioa" },
+ { .compatible = "canaan,k210-fpioa" },
{ }
};
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index fc22f540fe..9200efced9 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -758,8 +758,8 @@ static const struct udevice_id dw_spi_ids[] = {
*/
{ .compatible = "altr,socfpga-spi", .data = (ulong)dw_spi_apb_init },
{ .compatible = "altr,socfpga-arria10-spi", .data = (ulong)dw_spi_apb_init },
- { .compatible = "canaan,kendryte-k210-spi", .data = (ulong)dw_spi_apb_init },
- { .compatible = "canaan,kendryte-k210-ssi", .data = (ulong)dw_spi_dwc_init },
+ { .compatible = "canaan,k210-spi", .data = (ulong)dw_spi_apb_init },
+ { .compatible = "canaan,k210-ssi", .data = (ulong)dw_spi_dwc_init },
{ .compatible = "intel,stratix10-spi", .data = (ulong)dw_spi_apb_init },
{ .compatible = "intel,agilex-spi", .data = (ulong)dw_spi_apb_init },
{ .compatible = "mscc,ocelot-spi", .data = (ulong)dw_spi_apb_init },
diff --git a/include/configs/sipeed-maix.h b/include/configs/sipeed-maix.h
index 1f74702ea7..1cc2992c80 100644
--- a/include/configs/sipeed-maix.h
+++ b/include/configs/sipeed-maix.h
@@ -20,7 +20,7 @@
"fdt_addr_r=0x80400000\0" \
"scriptaddr=0x80020000\0" \
"kernel_addr_r=0x80060000\0" \
- "fdtfile=kendryte/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ "fdtfile=k210/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"k210_bootcmd=load mmc 0:1 $loadaddr /uImage && " \
"load mmc 0:1 $fdt_addr_r /k210.dtb && " \
"bootm $loadaddr - $fdt_addr_r\0"
diff --git a/include/kendryte/pll.h b/include/k210/pll.h
similarity index 100%
rename from include/kendryte/pll.h
rename to include/k210/pll.h
diff --git a/test/dm/k210_pll.c b/test/dm/k210_pll.c
index f55379f336..a0cc84c396 100644
--- a/test/dm/k210_pll.c
+++ b/test/dm/k210_pll.c
@@ -7,7 +7,7 @@
/* For DIV_ROUND_DOWN_ULL, defined in linux/kernel.h */
#include <div64.h>
#include <dm/test.h>
-#include <kendryte/pll.h>
+#include <k210/pll.h>
#include <test/ut.h>
static int dm_test_k210_pll_calc_config(u32 rate, u32 rate_in,
--
2.35.1
More information about the U-Boot
mailing list