[PATCH 22/27] imx: imx8ulp: enable wdog_ad interrupt in CMC1

Peng Fan (OSS) peng.fan at oss.nxp.com
Mon Feb 14 13:47:30 CET 2022


From: Peng Fan <peng.fan at nxp.com>

Enable wdog_ad interrupt being triggered by CMC1 to CM33 to let CM33
know A35 reset and reinitialize rpmsg.
Clear wdog_ad and AD_PERIPH reset interrupt after A35 up, otherwise
M33 will always receive interrupt.

Reviewed-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/imx8ulp/soc.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c
index b0ddaef222..86ca4ffad9 100644
--- a/arch/arm/mach-imx/imx8ulp/soc.c
+++ b/arch/arm/mach-imx/imx8ulp/soc.c
@@ -570,6 +570,19 @@ int arch_cpu_init(void)
 		int ret;
 		bool rdc_en = true; /* Default assume DBD_EN is set */
 
+		/* Enable System Reset Interrupt using WDOG_AD */
+		setbits_le32(CMC1_BASE_ADDR + 0x8C, BIT(13));
+		/* Clear AD_PERIPH Power switch domain out of reset interrupt flag */
+		setbits_le32(CMC1_BASE_ADDR + 0x70, BIT(4));
+
+		if (readl(CMC1_BASE_ADDR + 0x90) & BIT(13)) {
+			/* Clear System Reset Interrupt Flag Register of WDOG_AD */
+			setbits_le32(CMC1_BASE_ADDR + 0x90, BIT(13));
+			/* Reset WDOG to clear reset request */
+			pcc_reset_peripheral(3, WDOG3_PCC3_SLOT, true);
+			pcc_reset_peripheral(3, WDOG3_PCC3_SLOT, false);
+		}
+
 		/* Disable wdog */
 		init_wdog();
 
-- 
2.30.0



More information about the U-Boot mailing list