[PATCH V2 2/2] arm: rmobile: rzg2_beacon: Enable proper Ethernet PHY

[Adam Ford]

The wrong phy was being enabled, because it worked and the proper
PHY did not.  After the Renesas maintainer made some adjustments
to the device tree, Linux was able to use the proper driver, and
when that device tree was ported to Linux, the ethernet stopped
working due to the lack of rgmii-rxid support.  Now that
rgmii-rxid is supported, enable the proper driver to restore
ethernet function.

Fixes: 1eaf61c84db6 ("arm: dts: beacon-rzg2: Resync device trees with Linux 5.16-rc3")
Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V2:  No change

diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig
index e6a0d68962..91b3fa2948 100644
--- a/configs/rzg2_beacon_defconfig
+++ b/configs/rzg2_beacon_defconfig
@@ -62,7 +62,7 @@ CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_BITBANGMII=y
-CONFIG_PHY_REALTEK=y
+CONFIG_PHY_ATHEROS=y
 CONFIG_DM_ETH=y
 CONFIG_RENESAS_RAVB=y
 CONFIG_DM_REGULATOR=y
-- 
2.34.1