[PATCH V3 00/16] Add support for J721E SK

[Sinthu Raja]

From: Sinthu Raja <sinthu.raja at ti.com>

Hi All,
This series adds support for J721E SK [1]. Below is the detailed description
of the J721E SoC and the SK board supporting features.
The arch/arm/dts/k3-j721e-r5-sk.dts been queued up in linux-next [2].

Changes in V3:
Addressed review comments such as
* Removed board_info in the SPL build.
 https://patchwork.ozlabs.org/project/uboot/patch/20210626145602.15702-2-sinthu.raja@ti.com/
* Removed K3-generic function call from mach-k3/j721e_init.c
* Updated the conditional check to be a positive check for the board(s) which 
may have daugther cards
* Re-order the code in board/ti/j721e/evm.c so that everything is under a single #ifdef

Changes in V2:
Board name updated from EAIK to SK.
* So changed the occurrences of EAIK to SK.
* Rename files from eaik to sk.

[1]  https://www.ti.com/tool/SK-TDA4VM
[2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/ti/k3-j721e-sk.dts

V2: https://patchwork.ozlabs.org/project/uboot/cover/20211102140558.32460-1-sinthu.raja@ti.com/
V1: https://patchwork.ozlabs.org/project/uboot/cover/20210626145602.15702-1-sinthu.raja@ti.com/

Sinthu Raja (16):
  drivers: power: pmic: Add support for tps659412 PMIC
  drivers: power: regulator: tps65941_regulator: Add support for 3Phase
    buck
  board: ti: j721e: Guard functions with right #ifdef to avoid build
    warnings
  board: ti: j721e: Enable support for reading EEPROM at next alternate
    address
  board: ti: j721e: Add support to update board_name for j721e-sk
  board: ti: j721e: Disable probing of daughtercards
  board: ti: j721e: Add support for detecting multiple device trees
  arm: j721e: Add support for selecting DT based on board name
  arm: dts: k3-j721e-r5-common-proc-board: Do not use power-domains for
    I2C
  arm: dts: k3-j721e-sk: Add initial A72 specific dts support
  arm: dts: k3-j721e-r5-sk: Add initial R5 specific dts support for
    j721e-sk
  configs: j721e_evm_r5: Enable support for building multiple dtbs into
    FIT
  configs: j721e_evm_a72: Add SK dtb as part of DTB FIT
  configs: j721e_evm_a72: Align OSPI partitions on erase block boundary
  configs: j721e_evm: Store env in MMC FAT partition
  include: configs: Update env for selecting right dtb

 arch/arm/dts/Makefile                         |   4 +-
 .../arm/dts/k3-j721e-r5-common-proc-board.dts |   5 +
 arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi       |  31 +
 arch/arm/dts/k3-j721e-r5-sk.dts               | 646 ++++++++++++++
 arch/arm/dts/k3-j721e-sk-u-boot.dtsi          | 280 +++++++
 arch/arm/dts/k3-j721e-sk.dts                  | 791 ++++++++++++++++++
 arch/arm/mach-k3/j721e_init.c                 |  58 ++
 board/ti/j721e/evm.c                          | 122 +--
 configs/j721e_evm_a72_defconfig               |  11 +-
 configs/j721e_evm_r5_defconfig                |   4 +
 drivers/power/pmic/tps65941.c                 |   1 +
 drivers/power/regulator/tps65941_regulator.c  |   2 +
 include/configs/j721e_evm.h                   |   4 +
 13 files changed, 1907 insertions(+), 52 deletions(-)
 create mode 100644 arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-j721e-r5-sk.dts
 create mode 100644 arch/arm/dts/k3-j721e-sk-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-j721e-sk.dts

-- 
2.35.0