[PATCH v1 3/3] mach-sunxi: Enable spi boot for SUNIV

[Jesse Taube]

Enable spi boot in spl on suniv architecture.

Signed-off-by: Jesse Taube <Mr.Bossman075 at gmail.com>
---
 arch/arm/mach-sunxi/Kconfig     | 2 +-
 configs/licheepi_nano_defconfig | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 205fe3c9d3..d1c60d2408 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1038,7 +1038,7 @@ config SPL_STACK_R_ADDR
 
 config SPL_SPI_SUNXI
 	bool "Support for SPI Flash on Allwinner SoCs in SPL"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 || MACH_SUNIV
 	help
 	  Enable support for SPI Flash. This option allows SPL to read from
 	  sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig
index 2ac0ef4285..9fd1dcc995 100644
--- a/configs/licheepi_nano_defconfig
+++ b/configs/licheepi_nano_defconfig
@@ -9,3 +9,4 @@ CONFIG_MACH_SUNIV=y
 CONFIG_DRAM_CLK=156
 CONFIG_DRAM_ZQ=0
 # CONFIG_VIDEO_SUNXI is not set
+CONFIG_SPL_SPI_SUNXI=y
-- 
2.34.1