[PATCH 19/24] binman: Allow different operations in FIT generator nodes
Simon Glass
sjg at chromium.org
Tue Feb 8 19:50:03 CET 2022
At present we only support expanding out FDT nodes. Make the operation
into an @operation property, so that others can be supported.
Re-arrange and tidy up the documentation so that it has separate
headings for each topic.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
tools/binman/entries.rst | 85 +++++++++++-----
tools/binman/etype/fit.py | 136 ++++++++++++++++++++-----
tools/binman/ftest.py | 7 ++
tools/binman/test/220_fit_bad_oper.dts | 27 +++++
4 files changed, 206 insertions(+), 49 deletions(-)
create mode 100644 tools/binman/test/220_fit_bad_oper.dts
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst
index d4a1f333dc..d483169712 100644
--- a/tools/binman/entries.rst
+++ b/tools/binman/entries.rst
@@ -553,6 +553,68 @@ For example, this creates an image containing a FIT with U-Boot SPL::
};
};
+More complex setups can be created, with generated nodes, as described
+below.
+
+Properties (in the 'fit' node itself)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Special properties have a `fit,` prefix, indicating that they should be
+processed but not included in the final FIT.
+
+The top-level 'fit' node supports the following special properties:
+
+ fit,external-offset
+ Indicates that the contents of the FIT are external and provides the
+ external offset. This is passed to mkimage via the -E and -p flags.
+
+ fit,fdt-list
+ Indicates the entry argument which provides the list of device tree
+ files for the gen-fdt-nodes operation (as below). This is often
+ `of-list` meaning that `-a of-list="dtb1 dtb2..."` should be passed
+ to binman.
+
+Substitutions
+~~~~~~~~~~~~~
+
+Node names and property values support a basic string-substitution feature.
+Available substitutions for '@' nodes (and property values) are:
+
+SEQ:
+ Sequence number of the generated fdt (1, 2, ...)
+NAME
+ Name of the dtb as provided (i.e. without adding '.dtb')
+
+The `default` property, if present, will be automatically set to the name
+if of configuration whose devicetree matches the `default-dt` entry
+argument, e.g. with `-a default-dt=sun50i-a64-pine64-lts`.
+
+Available substitutions for property values in these nodes are:
+
+DEFAULT-SEQ:
+ Sequence number of the default fdt, as provided by the 'default-dt'
+ entry argument
+
+Available operations
+~~~~~~~~~~~~~~~~~~~~
+
+You can add an operation to an '@' node to indicate which operation is
+required::
+
+ @fdt-SEQ {
+ fit,operation = "gen-fdt-nodes";
+ ...
+ };
+
+Available operations are:
+
+gen-fdt-nodes
+ Generate FDT nodes as above. This is the default if there is no
+ `fit,operation` property.
+
+Generating nodes from an FDT list (gen-fdt-nodes)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
U-Boot supports creating fdt and config nodes automatically. To do this,
pass an `of-list` property (e.g. `-a of-list=file1 file2`). This tells
binman that you want to generates nodes for two files: `file1.dtb` and
@@ -590,32 +652,9 @@ You can create config nodes in a similar way::
This tells binman to create nodes `config-1` and `config-2`, i.e. a config
for each of your two files.
-Available substitutions for '@' nodes are:
-
-SEQ:
- Sequence number of the generated fdt (1, 2, ...)
-NAME
- Name of the dtb as provided (i.e. without adding '.dtb')
-
Note that if no devicetree files are provided (with '-a of-list' as above)
then no nodes will be generated.
-The 'default' property, if present, will be automatically set to the name
-if of configuration whose devicetree matches the 'default-dt' entry
-argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'.
-
-Available substitutions for '@' property values are
-
-DEFAULT-SEQ:
- Sequence number of the default fdt,as provided by the 'default-dt' entry
- argument
-
-Properties (in the 'fit' node itself):
- fit,external-offset: Indicates that the contents of the FIT are external
- and provides the external offset. This is passsed to mkimage via
- the -E and -p flags.
-
-
Entry: fmap: An entry which contains an Fmap section
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
index bf84246904..6210deeef7 100644
--- a/tools/binman/etype/fit.py
+++ b/tools/binman/etype/fit.py
@@ -13,6 +13,12 @@ from dtoc import fdt_util
from dtoc.fdt import Fdt
from patman import tools
+# Supported operations, with the fit,operation property
+OP_GEN_FDT_NODES = range(1)
+OPERATIONS = {
+ 'gen-fdt-nodes': OP_GEN_FDT_NODES,
+ }
+
class Entry_fit(Entry):
"""Flat Image Tree (FIT)
@@ -46,6 +52,68 @@ class Entry_fit(Entry):
};
};
+ More complex setups can be created, with generated nodes, as described
+ below.
+
+ Properties (in the 'fit' node itself)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ Special properties have a `fit,` prefix, indicating that they should be
+ processed but not included in the final FIT.
+
+ The top-level 'fit' node supports the following special properties:
+
+ fit,external-offset
+ Indicates that the contents of the FIT are external and provides the
+ external offset. This is passed to mkimage via the -E and -p flags.
+
+ fit,fdt-list
+ Indicates the entry argument which provides the list of device tree
+ files for the gen-fdt-nodes operation (as below). This is often
+ `of-list` meaning that `-a of-list="dtb1 dtb2..."` should be passed
+ to binman.
+
+ Substitutions
+ ~~~~~~~~~~~~~
+
+ Node names and property values support a basic string-substitution feature.
+ Available substitutions for '@' nodes (and property values) are:
+
+ SEQ:
+ Sequence number of the generated fdt (1, 2, ...)
+ NAME
+ Name of the dtb as provided (i.e. without adding '.dtb')
+
+ The `default` property, if present, will be automatically set to the name
+ if of configuration whose devicetree matches the `default-dt` entry
+ argument, e.g. with `-a default-dt=sun50i-a64-pine64-lts`.
+
+ Available substitutions for property values in these nodes are:
+
+ DEFAULT-SEQ:
+ Sequence number of the default fdt, as provided by the 'default-dt'
+ entry argument
+
+ Available operations
+ ~~~~~~~~~~~~~~~~~~~~
+
+ You can add an operation to an '@' node to indicate which operation is
+ required::
+
+ @fdt-SEQ {
+ fit,operation = "gen-fdt-nodes";
+ ...
+ };
+
+ Available operations are:
+
+ gen-fdt-nodes
+ Generate FDT nodes as above. This is the default if there is no
+ `fit,operation` property.
+
+ Generating nodes from an FDT list (gen-fdt-nodes)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
U-Boot supports creating fdt and config nodes automatically. To do this,
pass an `of-list` property (e.g. `-a of-list=file1 file2`). This tells
binman that you want to generates nodes for two files: `file1.dtb` and
@@ -83,31 +151,8 @@ class Entry_fit(Entry):
This tells binman to create nodes `config-1` and `config-2`, i.e. a config
for each of your two files.
- Available substitutions for '@' nodes are:
-
- SEQ:
- Sequence number of the generated fdt (1, 2, ...)
- NAME
- Name of the dtb as provided (i.e. without adding '.dtb')
-
Note that if no devicetree files are provided (with '-a of-list' as above)
then no nodes will be generated.
-
- The 'default' property, if present, will be automatically set to the name
- if of configuration whose devicetree matches the 'default-dt' entry
- argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'.
-
- Available substitutions for '@' property values are
-
- DEFAULT-SEQ:
- Sequence number of the default fdt,as provided by the 'default-dt' entry
- argument
-
- Properties (in the 'fit' node itself):
- fit,external-offset: Indicates that the contents of the FIT are external
- and provides the external offset. This is passsed to mkimage via
- the -E and -p flags.
-
"""
def __init__(self, section, etype, node):
"""
@@ -141,6 +186,26 @@ class Entry_fit(Entry):
self.ReadEntries()
super().ReadNode()
+ def _get_operation(self, subnode):
+ """Get the operation referenced by a subnode
+
+ Args:
+ subnode (Node): Subnode (of the FIT) to check
+
+ Returns:
+ int: Operation to perform
+
+ Raises:
+ ValueError: Invalid operation name
+ """
+ oper_name = subnode.props.get('fit,operation')
+ if not oper_name:
+ return OP_GEN_FDT_NODES
+ oper = OPERATIONS.get(oper_name.value)
+ if not oper:
+ self.Raise(f"Unknown operation '{oper_name.value}'")
+ return oper
+
def ReadEntries(self):
def _process_prop(pname, prop):
"""Process special properties
@@ -171,8 +236,8 @@ class Entry_fit(Entry):
return
fsw.property(pname, prop.bytes)
- def _generate_node(subnode, depth, in_images):
- """Generate nodes from a template
+ def _scan_gen_fdt_nodes(subnode, depth, in_images):
+ """Generate FDT nodes
This creates one node for each member of self._fdts using the
provided template. If a property value contains 'NAME' it is
@@ -212,6 +277,25 @@ class Entry_fit(Entry):
else:
self.Raise("Generator node requires 'fit,fdt-list' property")
+ def _scan_node(subnode, depth, in_images):
+ """Generate nodes from a template
+
+ This creates one node for each member of self._fdts using the
+ provided template. If a property value contains 'NAME' it is
+ replaced with the filename of the FDT. If a property value contains
+ SEQ it is replaced with the node sequence number, where 1 is the
+ first.
+
+ Args:
+ subnode (None): Generator node to process
+ depth: Current node depth (0 is the base 'fit' node)
+ in_images: True if this is inside the 'images' node, so that
+ 'data' properties should be generated
+ """
+ oper = self._get_operation(subnode)
+ if oper == OP_GEN_FDT_NODES:
+ _scan_gen_fdt_nodes(subnode, depth, in_images)
+
def _AddNode(base_node, depth, node):
"""Add a node to the FIT
@@ -250,7 +334,7 @@ class Entry_fit(Entry):
# fsw.add_node() or _AddNode() for it.
pass
elif self.GetImage().generate and subnode.name.startswith('@'):
- _generate_node(subnode, depth, in_images)
+ _scan_node(subnode, depth, in_images)
else:
with fsw.add_node(subnode.name):
_AddNode(base_node, depth + 1, subnode)
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 5400f76c67..5a0dc70ed9 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -5118,6 +5118,13 @@ fdt fdtmap Extract the devicetree blob from the fdtmap
finally:
shutil.rmtree(tmpdir)
+ def testFitFdtBadOper(self):
+ """Check handling of an FDT map when the section cannot be found"""
+ with self.assertRaises(ValueError) as exc:
+ self._DoReadFileDtb('220_fit_bad_oper.dts')
+ self.assertIn("Node '/binman/fit': Unknown operation 'unknown'",
+ str(exc.exception))
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/220_fit_bad_oper.dts b/tools/binman/test/220_fit_bad_oper.dts
new file mode 100644
index 0000000000..cee801e2ea
--- /dev/null
+++ b/tools/binman/test/220_fit_bad_oper.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ fit {
+ description = "test-desc";
+ #address-cells = <1>;
+ fit,fdt-list = "of-list";
+
+ images {
+ @fdt-SEQ {
+ fit,operation = "unknown";
+ description = "fdt-NAME.dtb";
+ type = "flat_dt";
+ compression = "none";
+ };
+ };
+ };
+ fdtmap {
+ };
+ };
+};
--
2.35.0.263.gb82422642f-goog
More information about the U-Boot
mailing list