[PATCH v2] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT

[Christian Gmeiner]

We only want to call do_board_detect() if CONFIG_TI_I2C_BOARD_DETECT
is set. Same as done for am64.

This makes it possible to add a custom am65 based board design to
U-Boot that does not use this board detection mechanism.

Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
---
 arch/arm/mach-k3/am6_init.c |  3 ++-
 board/ti/am65x/evm.c        | 26 +++++++++++++++-----------
 2 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index ffb7aaded2..8a6b1de764 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -251,7 +251,8 @@ void board_init_f(ulong dummy)
 	k3_sysfw_print_ver();
 
 	/* Perform EEPROM-based board detection */
-	do_board_detect();
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+		do_board_detect();
 
 #if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
 	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs),
diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c
index fbe33cbea5..7182a8cad1 100644
--- a/board/ti/am65x/evm.c
+++ b/board/ti/am65x/evm.c
@@ -129,6 +129,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 }
 #endif
 
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
 int do_board_detect(void)
 {
 	int ret;
@@ -353,23 +354,26 @@ static int probe_daughtercards(void)
 
 	return 0;
 }
+#endif
 
 int board_late_init(void)
 {
-	struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) {
+		struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
 
-	setup_board_eeprom_env();
+		setup_board_eeprom_env();
 
-	/*
-	 * The first MAC address for ethernet a.k.a. ethernet0 comes from
-	 * efuse populated via the am654 gigabit eth switch subsystem driver.
-	 * All the other ones are populated via EEPROM, hence continue with
-	 * an index of 1.
-	 */
-	board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt);
+		/*
+		 * The first MAC address for ethernet a.k.a. ethernet0 comes from
+		 * efuse populated via the am654 gigabit eth switch subsystem driver.
+		 * All the other ones are populated via EEPROM, hence continue with
+		 * an index of 1.
+		 */
+		board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt);
 
-	/* Check for and probe any plugged-in daughtercards */
-	probe_daughtercards();
+		/* Check for and probe any plugged-in daughtercards */
+		probe_daughtercards();
+	}
 
 	return 0;
 }
-- 
2.34.1