[PATCH v1 14/15] arm: dts: rockchip: sync rk3288-veyron DT from Linux

Johan Jonker jbx6244 at gmail.com
Mon Feb 7 04:47:26 CET 2022


Sync rk3288-veyron DT from Linux version 5.17.

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 arch/arm/dts/rk3288-veyron-analog-audio.dtsi  |  99 +++
 .../dts/rk3288-veyron-broadcom-bluetooth.dtsi |  22 +
 arch/arm/dts/rk3288-veyron-chromebook.dtsi    | 115 ++--
 arch/arm/dts/rk3288-veyron-edp.dtsi           | 141 ++++
 arch/arm/dts/rk3288-veyron-jerry.dts          | 512 ++++++++++----
 arch/arm/dts/rk3288-veyron-mickey.dts         | 343 +++++++---
 arch/arm/dts/rk3288-veyron-minnie.dts         | 441 +++++++-----
 arch/arm/dts/rk3288-veyron-sdmmc.dtsi         |  89 +++
 arch/arm/dts/rk3288-veyron-speedy.dts         | 303 ++++++--
 arch/arm/dts/rk3288-veyron.dtsi               | 644 ++++++------------
 10 files changed, 1799 insertions(+), 910 deletions(-)
 create mode 100644 arch/arm/dts/rk3288-veyron-analog-audio.dtsi
 create mode 100644 arch/arm/dts/rk3288-veyron-broadcom-bluetooth.dtsi
 create mode 100644 arch/arm/dts/rk3288-veyron-edp.dtsi
 create mode 100644 arch/arm/dts/rk3288-veyron-sdmmc.dtsi

diff --git a/arch/arm/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/dts/rk3288-veyron-analog-audio.dtsi
new file mode 100644
index 00000000..51208d16
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-analog-audio.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Veyron (and derivatives) fragment for the  max98090 audio
+ * codec and analog headphone jack.
+ *
+ * Copyright 2016 Google, Inc
+ */
+
+/ {
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_det>, <&hp_det>;
+		rockchip,model = "VEYRON-I2S";
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,audio-codec = <&max98090>;
+		rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
+		rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
+		rockchip,headset-codec = <&headsetcodec>;
+		rockchip,hdmi-codec = <&hdmi>;
+	};
+};
+
+&i2c2 {
+	max98090: max98090 at 10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&int_codec>;
+	};
+};
+
+&i2c4 {
+	headsetcodec: ts3a227e at 3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_int_l>;
+		ti,micbias = <7>;		/* MICBIAS = 2.8V */
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc18_codec>;
+};
+
+&rk808 {
+	vcc10-supply = <&vcc33_sys>;
+
+	regulators {
+		vcc18_codec: LDO_REG6 {
+			regulator-name = "vcc18_codec";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	codec {
+		hp_det: hp-det {
+			rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/*
+		 * HACK: We're going to _pull down_ this _active low_ interrupt
+		 * so that it never fires.  We don't need this interrupt because
+		 * we've got a ts3a227e chip but the driver requires it.
+		 */
+		int_codec: int-codec {
+			rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		mic_det: mic-det {
+			rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headset {
+		ts3a227e_int_l: ts3a227e-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/dts/rk3288-veyron-broadcom-bluetooth.dtsi
new file mode 100644
index 00000000..a10d25ac
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
+ * chip.
+ *
+ * Copyright 2019 Google, Inc
+ */
+
+&uart0 {
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
+			    <&bt_dev_wake>;
+
+		compatible = "brcm,bcm43540-bt";
+		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		max-speed		= <3000000>;
+		brcm,bt-pcm-int-params	= [01 02 00 01 01];
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
index 143eaae2..05112c25 100644
--- a/arch/arm/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/dts/rk3288-veyron-chromebook.dtsi
@@ -1,39 +1,45 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron (and derivatives) board device tree source
+ * Chromebook specific parts
  *
- * Copyright 2014 Google, Inc
+ * Copyright 2015 Google, Inc
  */
 
 #include <dt-bindings/clock/rockchip,rk808.h>
 #include <dt-bindings/input/input.h>
 #include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-analog-audio.dtsi"
+#include "rk3288-veyron-edp.dtsi"
+#include "rk3288-veyron-sdmmc.dtsi"
 
 / {
 	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
-		video0 = &vopl;
-		video1 = &vopb;
-	};
-
-	gpio_keys: gpio-keys {
-		pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
-		lid {
-			label = "Lid";
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <0>; /* SW_LID */
-			linux,input-type = <5>; /* EV_SW */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-                };
 	};
 
 	gpio-charger {
 		compatible = "gpio-charger";
-		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		charger-type = "mains";
+		gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ac_present_ap>;
-		charger-type = "mains";
+	};
+
+	lid_switch: lid-switch {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_lid_int_l>;
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <1>;
+		};
 	};
 
 	/* A non-regulated voltage from power supply or battery */
@@ -56,7 +62,7 @@
 	vcc5_host1: vcc5-host1-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&host1_pwr_en>;
 		regulator-name = "vcc5_host1";
@@ -68,7 +74,7 @@
 	vcc5v_otg: vcc5v-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usbotg_pwren_h>;
 		regulator-name = "vcc5_host2";
@@ -78,34 +84,34 @@
 };
 
 &rk808 {
+	vcc11-supply = <&vcc_5v>;
+
 	regulators {
 		vcc33_ccd: LDO_REG8 {
+			regulator-name = "vcc33_ccd";
 			regulator-always-on;
 			regulator-boot-on;
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			regulator-name = "vcc33_ccd";
-			regulator-suspend-mem-disabled;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
 		};
 	};
 };
 
 &spi0 {
 	status = "okay";
-	spi-activate-delay = <100>;
-	spi-max-frequency = <3000000>;
-	spi-deactivate-delay = <200>;
 
 	cros_ec: ec at 0 {
 		compatible = "google,cros-ec-spi";
-		spi-max-frequency = <3000000>;
+		reg = <0>;
+		google,cros-ec-spi-pre-delay = <30>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		ec-interrupt = <&gpio7 7 GPIO_ACTIVE_LOW>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_int>;
-		reg = <0>;
-		google,cros-ec-spi-pre-delay = <30>;
+		spi-max-frequency = <3000000>;
 
 		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
@@ -118,86 +124,59 @@
 
 &i2c4 {
 	trackpad at 15 {
-		compatible = "elan,i2c_touchpad";
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&trackpad_int>;
-		reg = <0x15>;
 		vcc-supply = <&vcc33_io>;
 		wakeup-source;
 	};
 };
 
 &pinctrl {
-	pinctrl-0 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Wake only */
-		&suspend_l_wake
-		&bt_dev_wake_awake
-	>;
-	pinctrl-1 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Sleep only */
-		&suspend_l_sleep
-		&bt_dev_wake_sleep
-	>;
-
 	buttons {
 		ap_lid_int_l: ap-lid-int-l {
-			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	charger {
 		ac_present_ap: ac-present-ap {
-			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	cros-ec {
 		ec_int: ec-int {
-			rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		sdmmc_wp_gpio: sdmmc-wp-gpio {
-			rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	suspend {
 		suspend_l_wake: suspend-l-wake {
-			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
 		};
 
 		suspend_l_sleep: suspend-l-sleep {
-			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
 	trackpad {
 		trackpad_int: trackpad-int {
-			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb-host {
 		host1_pwr_en: host1-pwr-en {
-			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		usbotg_pwren_h: usbotg-pwren-h {
-			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
diff --git a/arch/arm/dts/rk3288-veyron-edp.dtsi b/arch/arm/dts/rk3288-veyron-edp.dtsi
new file mode 100644
index 00000000..32c0f107
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-edp.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the edp displays
+ *
+ * Copyright 2019 Google LLC
+ */
+
+/ {
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 0>;
+		post-pwm-on-delay-ms = <10>;
+		pwm-off-delay-ms = <10>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	panel: panel {
+		compatible = "innolux,n116bge";
+		status = "okay";
+		power-supply = <&panel_regulator>;
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <74250000>;
+			hactive = <1366>;
+			hfront-porch = <136>;
+			hback-porch = <60>;
+			hsync-len = <30>;
+			hsync-active = <0>;
+			vactive = <768>;
+			vfront-porch = <8>;
+			vback-porch = <12>;
+			vsync-len = <12>;
+			vsync-active = <0>;
+		};
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+
+	ports {
+		edp_out: port at 1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_out_panel: endpoint at 0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-veyron-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts
index ff7669eb..2c916c50 100644
--- a/arch/arm/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/dts/rk3288-veyron-jerry.dts
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Jerry Rev 3+ board device tree source
  *
- * Copyright 2014 Google, Inc
+ * Copyright 2015 Google, Inc
  */
 
 /dts-v1/;
@@ -11,168 +11,454 @@
 
 / {
 	model = "Google Jerry";
-	compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+	compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14",
+		     "google,veyron-jerry-rev13", "google,veyron-jerry-rev12",
+		     "google,veyron-jerry-rev11", "google,veyron-jerry-rev10",
+		     "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
 		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
 		     "google,veyron-jerry-rev3", "google,veyron-jerry",
 		     "google,veyron", "rockchip,rk3288";
-
-        chosen {
-                stdout-path = &uart2;
-        };
-
-	panel_regulator: panel-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_enable_h>;
-		regulator-name = "panel_regulator";
-		vin-supply = <&vcc33_sys>;
-	};
-
-	vcc18_lcd: vcc18-lcd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&avdd_1v8_disp_en>;
-		regulator-name = "vcc18_lcd";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc18_wl>;
-	};
-
-	backlight_regulator: backlight-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_pwr_en>;
-		regulator-name = "backlight_regulator";
-		vin-supply = <&vcc33_sys>;
-		startup-delay-us = <15000>;
-	};
-
-	sound {
-		compatible = "rockchip,audio-max98090-jerry";
-
-		cpu {
-			sound-dai = <&i2s 0>;
-		};
-
-		codec {
-			sound-dai = <&max98090 0>;
-		};
-	};
-};
-
-&gpio_keys {
-	power {
-		gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&backlight {
-	power-supply = <&backlight_regulator>;
-};
-
-&panel {
-	power-supply= <&panel_regulator>;
 };
 
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
-	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
-		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
 
 	regulators {
 		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
 			regulator-always-on;
 			regulator-boot-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
-			regulator-name = "mic_vcc";
-			regulator-suspend-mem-disabled;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
 		};
 	};
 };
 
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mwifiex: wifi at 1 {
+		compatible = "marvell,sd8897";
+		reg = <1>;
+
+		marvell,caldata-txpwrlimit-2g = /bits/ 8 <
+0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x01 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x02 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x03 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x04 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x05 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x06 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x07 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x08 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x09 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0a 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x0b 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0c 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x0d 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09>;
+
+		marvell,caldata-txpwrlimit-5g-sub0 = /bits/ 8 <
+0x01 0x00 0x06 0x00 0xf0 0x01 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x24 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09
+0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x28 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09
+0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05
+0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x2c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09
+0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09
+0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x30
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05
+0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05
+0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x34 0x01 0x0c
+0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09
+0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05
+0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05
+0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x38 0x01 0x0c 0x02 0x0c
+0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a
+0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05
+0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05
+0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x3c 0x01 0x0c 0x02 0x0c 0x03 0x0c
+0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a
+0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05
+0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05
+0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x40 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a
+0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05
+0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>;
+
+		marvell,caldata-txpwrlimit-5g-sub1 = /bits/ 8 <
+0x01 0x00 0x06 0x00 0xaa 0x02 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x64 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09
+0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x68 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09
+0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05
+0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x6c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09
+0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09
+0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x70
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05
+0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05
+0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x74 0x01 0x0c
+0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09
+0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05
+0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05
+0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x78 0x01 0x0c 0x02 0x0c
+0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a
+0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05
+0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05
+0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x7c 0x01 0x0c 0x02 0x0c 0x03 0x0c
+0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a
+0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05
+0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05
+0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x80 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a
+0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05
+0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x84 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09
+0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x88 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08
+0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04
+0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x8c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08
+0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08
+0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>;
+
+		marvell,caldata-txpwrlimit-5g-sub2 = /bits/ 8 <
+0x01 0x00 0x06 0x00 0x36 0x01 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x95 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08
+0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x99 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08
+0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04
+0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x9d 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08
+0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08
+0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa1
+0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08
+0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04
+0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05
+0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa5 0x01 0x0b
+0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08
+0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04
+0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05
+0x1a 0x05 0x1b 0x05>;
+	};
+};
+
 &sdmmc {
+	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
-	disable-wp;
 };
 
 &vcc_5v {
 	enable-active-high;
-	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&drv_5v>;
 };
 
 &vcc50_hdmi {
 	enable-active-high;
-	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
-&edp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&edp_hpd>;
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFAULT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "",
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFAULT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
 };
 
 &pinctrl {
-	backlight {
-		bl_pwr_en: bl_pwr_en {
-			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
 
-	buck-5v {
-		drv_5v: drv-5v {
-			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
 
-	edp {
-		edp_hpd: edp_hpd {
-			rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
-		};
-	};
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
 
-	emmc {
-		/* Make sure eMMC is not in reset */
-		emmc_deassert_reset: emmc-deassert-reset {
-			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	hdmi {
 		vcc50_hdmi_en: vcc50-hdmi-en {
-			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	lcd {
-		lcd_enable_h: lcd-en {
-			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		avdd_1v8_disp_en: avdd-1v8-disp-en {
-			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		dvs_1: dvs-1 {
-			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		dvs_2: dvs-2 {
-			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 };
@@ -188,24 +474,18 @@
 	pinctrl-0 = <&i2c4_xfer &trackpad_int>;
 
 	trackpad at 15 {
-		compatible = "elan,i2c_touchpad";
-		interrupt-parent = <&gpio7>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 		/*
 		 * Remove the inherited pinctrl settings to avoid clashing
 		 * with bus-wide ones.
 		 */
 		/delete-property/pinctrl-names;
 		/delete-property/pinctrl-0;
-		reg = <0x15>;
-		vcc-supply = <&vcc33_io>;
-		wakeup-source;
 	};
 
 	trackpad at 2c {
 		compatible = "hid-over-i2c";
 		interrupt-parent = <&gpio7>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
 		vcc-supply = <&vcc33_io>;
diff --git a/arch/arm/dts/rk3288-veyron-mickey.dts b/arch/arm/dts/rk3288-veyron-mickey.dts
index 0521d9e0..ffd1121d 100644
--- a/arch/arm/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/dts/rk3288-veyron-mickey.dts
@@ -1,49 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Mickey Rev 0 board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Mickey";
@@ -65,6 +29,13 @@
 		regulator-boot-on;
 		vin-supply = <&vcc33_sys>;
 	};
+
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		rockchip,model = "VEYRON-HDMI";
+		rockchip,hdmi-codec = <&hdmi>;
+		rockchip,i2s-controller = <&i2s>;
+	};
 };
 
 &cpu_thermal {
@@ -112,14 +83,18 @@
 	cooling-maps {
 		/*
 		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
-		 * and don't let the GPU go faster than 400 MHz.  Note that we
-		 * won't throttle the GPU lower than 400 MHz due to CPU
-		 * heat--we'll let the GPU do the rest itself.
+		 * and don't let the GPU go faster than 400 MHz.
 		 */
 		cpu_warm_limit_cpu {
 			trip = <&cpu_alert_warm>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT 4>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT 4>,
+					 <&cpu1 THERMAL_NO_LIMIT 4>,
+					 <&cpu2 THERMAL_NO_LIMIT 4>,
+					 <&cpu3 THERMAL_NO_LIMIT 4>;
+		};
+		cpu_warm_limit_gpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device = <&gpu 1 1>;
 		};
 
 		/*
@@ -140,29 +115,100 @@
 		 */
 		cpu_almost_hot_limit_cpu {
 			trip = <&cpu_alert_almost_hot>;
-			cooling-device =
-				<&cpu0 5 6>;
+			cooling-device = <&cpu0 5 6>, <&cpu1 5 6>, <&cpu2 5 6>,
+					 <&cpu3 5 6>;
 		};
 		cpu_hot_limit_cpu {
 			trip = <&cpu_alert_hot>;
-			cooling-device =
-				<&cpu0 7 7>;
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>,
+					 <&cpu3 7 7>;
 		};
 		cpu_hotter_limit_cpu {
 			trip = <&cpu_alert_hotter>;
-			cooling-device =
-				<&cpu0 7 8>;
+			cooling-device = <&cpu0 7 8>, <&cpu1 7 8>, <&cpu2 7 8>,
+					 <&cpu3 7 8>;
 		};
 		cpu_very_hot_limit_cpu {
 			trip = <&cpu_alert_very_hot>;
-			cooling-device =
-				<&cpu0 8 THERMAL_NO_LIMIT>;
+			cooling-device = <&cpu0 8 THERMAL_NO_LIMIT>,
+					 <&cpu1 8 THERMAL_NO_LIMIT>,
+					 <&cpu2 8 THERMAL_NO_LIMIT>,
+					 <&cpu3 8 THERMAL_NO_LIMIT>;
+		};
+
+		/* At very hot, don't let GPU go over 300 MHz */
+		cpu_very_hot_limit_gpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device = <&gpu 2 2>;
 		};
 	};
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
+&gpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		gpu_alert_warmish: gpu_alert_warmish {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_warm: gpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_hotter: gpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_very_very_hot: gpu_alert_very_very_hot {
+			temperature = <86000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/* After 1st level throttle the GPU down to as low as 400 MHz */
+		gpu_warmish_limit_gpu {
+			trip = <&gpu_alert_warmish>;
+			cooling-device = <&gpu THERMAL_NO_LIMIT 1>;
+		};
+
+		/*
+		 * Slightly after we throttle the GPU, we'll also make sure that
+		 * the CPU can't go faster than 1.4 GHz.  Note that we won't
+		 * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll
+		 * let the CPU do the rest itself.
+		 */
+		gpu_warm_limit_cpu {
+			trip = <&gpu_alert_warm>;
+			cooling-device = <&cpu0 4 4>,
+					 <&cpu1 4 4>,
+					 <&cpu2 4 4>,
+					 <&cpu3 4 4>;
+		};
+
+		/* When hot, GPU goes down to 300 MHz */
+		gpu_hotter_limit_gpu {
+			trip = <&gpu_alert_hotter>;
+			cooling-device = <&gpu 2 2>;
+		};
+
+		/* When really hot, don't let GPU go _above_ 300 MHz */
+		gpu_very_very_hot_limit_gpu {
+			trip = <&gpu_alert_very_very_hot>;
+			cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+		};
+	};
 };
 
 &i2c2 {
@@ -175,15 +221,13 @@
 
 &i2s {
 	status = "okay";
-	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
 };
 
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
-	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
-		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
 
 	/delete-property/ vcc6-supply;
 	/delete-property/ vcc12-supply;
@@ -216,40 +260,183 @@
 	};
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "",
+			  "",
+			  "",
+			  "PMIC_INT_L",
+			  "POWER_BUTTON_L",
+			  "",
+			  "",
+
+			  "",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OT_RESET",
+			  "",
+			  "",
+			  "AP_WARM_RESET_H",
+			  "",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "",
+			  "nFALUT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS_L",
+			  "UART0_RTS_L",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "PWM_LOG",
+			  "",
+			  "",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "HDMI_WAKE",
+			  "POWER_HDMI_ON",
+			  "DVS1",
+			  "",
+			  "",
+			  "DVS2",
+
+			  "HDMI_CEC",
+			  "",
+			  "",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
 	hdmi {
 		power_hdmi_on: power-hdmi-on {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		dvs_1: dvs-1 {
-			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		dvs_2: dvs-2 {
-			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 };
 
-&sdmmc {
-	status = "disabled";
-};
-
-&sdio0 {
-	status = "disabled";
-};
-
-&sdmmc {
-	status = "disabled";
-};
-
-&spi0 {
-	status = "disabled";
-};
-
 &usb_host0_ehci {
 	status = "disabled";
 };
@@ -260,7 +447,7 @@
 
 &vcc50_hdmi {
 	enable-active-high;
-	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&power_hdmi_on>;
 };
diff --git a/arch/arm/dts/rk3288-veyron-minnie.dts b/arch/arm/dts/rk3288-veyron-minnie.dts
index b56a3f4f..82fc6fba 100644
--- a/arch/arm/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/dts/rk3288-veyron-minnie.dts
@@ -1,49 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Minnie Rev 0+ board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Minnie";
@@ -52,111 +16,31 @@
 		     "google,veyron-minnie-rev0", "google,veyron-minnie",
 		     "google,veyron", "rockchip,rk3288";
 
-	backlight_regulator: backlight-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_pwr_en>;
-		regulator-name = "backlight_regulator";
-		vin-supply = <&vcc33_sys>;
-		startup-delay-us = <15000>;
-	};
-
-	panel_regulator: panel-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_enable_h>;
-		regulator-name = "panel_regulator";
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc33_sys>;
-	};
-
-	vcc18_lcd: vcc18-lcd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+	volume_buttons: volume-buttons {
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&avdd_1v8_disp_en>;
-		regulator-name = "vcc18_lcd";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc18_wl>;
-	};
-
-	sound {
-		compatible = "rockchip,audio-max98090-jerry";
+		pinctrl-0 = <&volum_down_l &volum_up_l>;
 
-		cpu {
-			sound-dai = <&i2s 0>;
+		volum_down {
+			label = "Volum_down";
+			gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <100>;
 		};
 
-		codec {
-			sound-dai = <&max98090 0>;
+		volum_up {
+			label = "Volum_up";
+			gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <100>;
 		};
 	};
 };
 
 &backlight {
 	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
-	brightness-levels = <
-			  0   3   4   5   6   7
-			  8   9  10  11  12  13  14  15
-			 16  17  18  19  20  21  22  23
-			 24  25  26  27  28  29  30  31
-			 32  33  34  35  36  37  38  39
-			 40  41  42  43  44  45  46  47
-			 48  49  50  51  52  53  54  55
-			 56  57  58  59  60  61  62  63
-			 64  65  66  67  68  69  70  71
-			 72  73  74  75  76  77  78  79
-			 80  81  82  83  84  85  86  87
-			 88  89  90  91  92  93  94  95
-			 96  97  98  99 100 101 102 103
-			104 105 106 107 108 109 110 111
-			112 113 114 115 116 117 118 119
-			120 121 122 123 124 125 126 127
-			128 129 130 131 132 133 134 135
-			136 137 138 139 140 141 142 143
-			144 145 146 147 148 149 150 151
-			152 153 154 155 156 157 158 159
-			160 161 162 163 164 165 166 167
-			168 169 170 171 172 173 174 175
-			176 177 178 179 180 181 182 183
-			184 185 186 187 188 189 190 191
-			192 193 194 195 196 197 198 199
-			200 201 202 203 204 205 206 207
-			208 209 210 211 212 213 214 215
-			216 217 218 219 220 221 222 223
-			224 225 226 227 228 229 230 231
-			232 233 234 235 236 237 238 239
-			240 241 242 243 244 245 246 247
-			248 249 250 251 252 253 254 255>;
-	power-supply = <&backlight_regulator>;
-};
-
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
-};
-
-&gpio_keys {
-	pinctrl-0 = <&pwr_key_h &ap_lid_int_l &volum_down_l &volum_up_l>;
-
-	volum_down {
-		label = "Volum_down";
-		gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-		linux,code = <KEY_VOLUMEDOWN>;
-		debounce-interval = <100>;
-	};
-
-	volum_up {
-		label = "Volum_up";
-		gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-		linux,code = <KEY_VOLUMEUP>;
-		debounce-interval = <100>;
-	};
+	brightness-levels = <3 255>;
+	num-interpolated-steps = <252>;
 };
 
 &i2c_tunnel {
@@ -177,18 +61,31 @@
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_int &touch_rst>;
-		reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
 		vcc33-supply = <&vcc33_touch>;
 		vccio-supply = <&vcc33_touch>;
 	};
 };
 
 &panel {
-	compatible = "auo,b101ean01", "simple-panel";
-	power-supply= <&panel_regulator>;
+	compatible = "auo,b101ean01";
+
+	/delete-node/ panel-timing;
+
+	panel-timing {
+		clock-frequency = <66666667>;
+		hactive = <1280>;
+		hfront-porch = <18>;
+		hback-porch = <21>;
+		hsync-len = <32>;
+		vactive = <800>;
+		vfront-porch = <4>;
+		vback-porch = <8>;
+		vsync-len = <18>;
+	};
 };
 
 &rk808 {
@@ -217,86 +114,302 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 
 &vcc_5v {
 	enable-active-high;
-	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&drv_5v>;
 };
 
 &vcc50_hdmi {
 	enable-active-high;
-	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "PROCHOT#",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN",
+			  "TOUCH_INT",
+			  "TOUCH_RST",
+
+			  "I2C3_SCL_TP",
+			  "I2C3_SDA_TP";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "dev_wake",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "Volum_Up#",
+			  "Volum_Down#",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVS_OK",
+			  "SDMMC_WP",
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFALUT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
-	backlight {
-		bl_pwr_en: bl_pwr_en {
-			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
 
 	buck-5v {
 		drv_5v: drv-5v {
-			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	buttons {
 		volum_down_l: volum-down-l {
-			rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <5 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
 		volum_up_l: volum-up-l {
-			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	hdmi {
 		vcc50_hdmi_en: vcc50-hdmi-en {
-			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	lcd {
-		lcd_enable_h: lcd-en {
-			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		avdd_1v8_disp_en: avdd-1v8-disp-en {
-			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		dvs_1: dvs-1 {
-			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		dvs_2: dvs-2 {
-			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	prochot {
 		gpio_prochot: gpio-prochot {
-			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	touchscreen {
 		touch_int: touch-int {
-			rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		touch_rst: touch-rst {
-			rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
diff --git a/arch/arm/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/dts/rk3288-veyron-sdmmc.dtsi
new file mode 100644
index 00000000..27fb06ce
--- /dev/null
+++ b/arch/arm/dts/rk3288-veyron-sdmmc.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for sdmmc cards
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+&io_domains {
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_none_drv_8ma>,
+					<6 RK_PC1 1 &pcfg_pull_none_drv_8ma>,
+					<6 RK_PC2 1 &pcfg_pull_none_drv_8ma>,
+					<6 RK_PC3 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * Builtin CD line is hooked to ground to prevent JTAG at boot
+		 * (and also to get the voltage rail correct).
+		 * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
+		 * think there's a card inserted
+		 */
+		sdmmc_cd_disabled: sdmmc-cd-disabled {
+			rockchip,pins = <6 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD */
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	vcc9-supply = <&vcc_5v>;
+
+	regulators {
+		vccio_sd: LDO_REG4 {
+			regulator-name = "vccio_sd";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc33_sd: LDO_REG5 {
+			regulator-name = "vcc33_sd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
diff --git a/arch/arm/dts/rk3288-veyron-speedy.dts b/arch/arm/dts/rk3288-veyron-speedy.dts
index 58c1fe96..4a3ea934 100644
--- a/arch/arm/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/dts/rk3288-veyron-speedy.dts
@@ -7,8 +7,8 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 #include "cros-ec-sbs.dtsi"
-#include "rk3288-veyron-speedy-u-boot.dtsi"
 
 / {
 	model = "Google Speedy";
@@ -17,44 +17,6 @@
 		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
 		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
 		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
-
-	panel_regulator: panel-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_enable_h>;
-		regulator-name = "panel_regulator";
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc33_sys>;
-	};
-
-	vcc18_lcd: vcc18-lcd {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&avdd_1v8_disp_en>;
-		regulator-name = "vcc18_lcd";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc18_wl>;
-	};
-
-	backlight_regulator: backlight-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_pwr_en>;
-		regulator-name = "backlight_regulator";
-		vin-supply = <&vcc33_sys>;
-		startup-delay-us = <15000>;
-	};
-};
-
-&backlight {
-	power-supply = <&backlight_regulator>;
 };
 
 &cpu_alert0 {
@@ -65,6 +27,10 @@
 	temperature = <70000>;
 };
 
+&cpu_crit {
+	temperature = <90000>;
+};
+
 &edp {
 	/delete-property/pinctrl-names;
 	/delete-property/pinctrl-0;
@@ -72,8 +38,12 @@
 	force-hpd;
 };
 
-&panel {
-	power-supply = <&panel_regulator>;
+&gpu_alert0 {
+	temperature = <80000>;
+};
+
+&gpu_crit {
+	temperature = <90000>;
 };
 
 &rk808 {
@@ -84,7 +54,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 
@@ -102,42 +72,253 @@
 	pinctrl-0 = <&vcc50_hdmi_en>;
 };
 
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "PWRLIMIT#_CPU",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "ALS_INT",		/* not connected */
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVS_OK",
+			  "",
+			  "EDP_HOTPLUG",
+			  "DVS1",
+			  "nFALUT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
 &pinctrl {
-	backlight {
-		bl_pwr_en: bl_pwr_en {
-			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
 
 	buck-5v {
 		drv_5v: drv-5v {
-			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	hdmi {
 		vcc50_hdmi_en: vcc50-hdmi-en {
-			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	lcd {
-		lcd_enable_h: lcd-en {
-			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		avdd_1v8_disp_en: avdd-1v8-disp-en {
-			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		dvs_1: dvs-1 {
-			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		dvs_2: dvs-2 {
-			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 };
diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
index 434b0d49..bd38e6ac 100644
--- a/arch/arm/dts/rk3288-veyron.dtsi
+++ b/arch/arm/dts/rk3288-veyron.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron (and derivatives) board device tree source
  *
- * Copyright 2014 Google, Inc
+ * Copyright 2015 Google, Inc
  */
 
 #include <dt-bindings/clock/rockchip,rk808.h>
@@ -10,150 +10,83 @@
 #include "rk3288.dtsi"
 
 / {
-	memory {
-		reg = <0x0 0x80000000>;
-	};
-
 	chosen {
-		stdout-path = &uart2;
-	};
-
-	firmware {
-		chromeos {
-			pinctrl-names = "default";
-			pinctrl-0 = <&fw_wp_ap>;
-			write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>;
-		};
+		stdout-path = "serial2:115200n8";
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <
-			  0   1   2   3   4   5   6   7
-			  8   9  10  11  12  13  14  15
-			 16  17  18  19  20  21  22  23
-			 24  25  26  27  28  29  30  31
-			 32  33  34  35  36  37  38  39
-			 40  41  42  43  44  45  46  47
-			 48  49  50  51  52  53  54  55
-			 56  57  58  59  60  61  62  63
-			 64  65  66  67  68  69  70  71
-			 72  73  74  75  76  77  78  79
-			 80  81  82  83  84  85  86  87
-			 88  89  90  91  92  93  94  95
-			 96  97  98  99 100 101 102 103
-			104 105 106 107 108 109 110 111
-			112 113 114 115 116 117 118 119
-			120 121 122 123 124 125 126 127
-			128 129 130 131 132 133 134 135
-			136 137 138 139 140 141 142 143
-			144 145 146 147 148 149 150 151
-			152 153 154 155 156 157 158 159
-			160 161 162 163 164 165 166 167
-			168 169 170 171 172 173 174 175
-			176 177 178 179 180 181 182 183
-			184 185 186 187 188 189 190 191
-			192 193 194 195 196 197 198 199
-			200 201 202 203 204 205 206 207
-			208 209 210 211 212 213 214 215
-			216 217 218 219 220 221 222 223
-			224 225 226 227 228 229 230 231
-			232 233 234 235 236 237 238 239
-			240 241 242 243 244 245 246 247
-			248 249 250 251 252 253 254 255>;
-		default-brightness-level = <128>;
-		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
-		backlight-boot-off;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en>;
-		pwms = <&pwm0 0 1000000 0>;
+	/*
+	 * The default coreboot on veyron devices ignores memory at 0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	panel: panel {
-		compatible ="cnm,n116bgeea2","simple-panel";
-		status = "okay";
-		power-supply = <&vcc33_lcd>;
-		backlight = <&backlight>;
-	};
 
-	gpio_keys: gpio-keys {
+	power_button: power-button {
 		compatible = "gpio-keys";
-
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_key_h>;
+		pinctrl-0 = <&pwr_key_l>;
+
 		power {
 			label = "Power";
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	gpio-restart {
 		compatible = "gpio-restart";
-		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_warm_reset_h>;
-		priority = /bits/ 8 <200>;
+		priority = <200>;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		pinctrl-0 = <&emmc_reset>;
 		pinctrl-names = "default";
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
 	};
 
-	sound {
-		compatible = "rockchip,rockchip-audio-max98090";
-		rockchip,model = "ROCKCHIP-I2S";
-		rockchip,i2s-controller = <&i2s>;
-		rockchip,audio-codec = <&max98090>;
-		rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
-		rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-		rockchip,headset-codec = <&headsetcodec>;
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&mic_det>, <&hp_det>;
-	};
-
-	vdd_logic: pwm-regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm1 0 2000 0>;
-
-		voltage-table = <1350000 0>,
-				<1300000 10>,
-				<1250000 20>,
-				<1200000 31>,
-				<1150000 41>,
-				<1100000 52>,
-				<1050000 62>,
-				<1000000 72>,
-				< 950000 83>;
+		pinctrl-0 = <&wifi_enable_h>;
 
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-name = "vdd_logic";
-		regulator-ramp-delay = <4000>;
+		/*
+		 * Depending on the actual card populated GPIO4 D4
+		 * correspond to one of these signals on the module:
+		 *
+		 * D4:
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
 	};
 
-	vcc33_sys: vcc33-sys {
+	vcc_5v: vcc-5v {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc33_sys";
+		regulator-name = "vcc_5v";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vccsys>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
-	vcc_5v: vcc-5v {
+	vcc33_sys: vcc33-sys {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v";
+		regulator-name = "vcc33_sys";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	vcc50_hdmi: vcc50-hdmi {
@@ -164,39 +97,21 @@
 		vin-supply = <&vcc_5v>;
 	};
 
-	bt_regulator: bt-regulator {
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card pouplated):
-		 * - BT_I2S_WS_BT_RFDISABLE_L
-		 * - No connect
-		 */
-
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_enable_l>;
-		regulator-name = "bt_regulator";
-	};
+	vdd_logic: vdd-logic {
+		compatible = "pwm-regulator";
+		regulator-name = "vdd_logic";
 
-	wifi_regulator: wifi-regulator {
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
+		pwms = <&pwm1 0 1994 0>;
+		pwm-supply = <&vcc33_sys>;
 
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-		regulator-name = "wifi_regulator";
+		pwm-dutycycle-range = <0x7b 0>;
+		pwm-dutycycle-unit = <0x94>;
 
-		/* Faux input supply.  See bt_regulator description. */
-		vin-supply = <&bt_regulator>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <4000>;
 	};
 };
 
@@ -204,71 +119,62 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
-&efuse {
-	status = "okay";
+&cpu_crit {
+	temperature = <100000>;
+};
+
+/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
+&cpu_opp_table {
+	/delete-node/ opp-312000000;
+
+	opp-1512000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <1300000>;
+	};
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1400000>;
+	};
 };
 
 &emmc {
-	broken-cd;
+	status = "okay";
+
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	rockchip,default-sample-phase = <158>;
+	disable-wp;
 	mmc-hs200-1_8v;
 	mmc-pwrseq = <&emmc_pwrseq>;
-	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>;
-	status = "okay";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 };
 
-&sdio0 {
-	broken-cd;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	cap-sdio-irq;
-	card-external-vcc-supply = <&wifi_regulator>;
-	clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>,
-		 <&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>;
-	clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock";
-	keep-power-in-suspend;
-	non-removable;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+&gpu {
+	mali-supply = <&vdd_gpu>;
 	status = "okay";
-	vmmc-supply = <&vcc33_sys>;
-	vqmmc-supply = <&vcc18_wl>;
 };
 
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	card-detect-delay = <200>;
-	cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-	num-slots = <1>;
-	status = "okay";
-	vmmc-supply = <&vcc33_sd>;
-	vqmmc-supply = <&vccio_sd>;
+&gpu_alert0 {
+	temperature = <72500>;
 };
 
-&spi2 {
-	status = "okay";
+&gpu_crit {
+	temperature = <100000>;
+};
 
-	spi_flash: spiflash at 0 {
-		compatible = "spidev", "jedec,spi-nor";
-		spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */
-		reg = <0>;
-	};
+&hdmi {
+	pinctrl-names = "default", "unwedge";
+	pinctrl-0 = <&hdmi_ddc>;
+	pinctrl-1 = <&hdmi_ddc_unwedge>;
+	status = "okay";
 };
 
 &i2c0 {
@@ -280,12 +186,12 @@
 
 	rk808: pmic at 1b {
 		compatible = "rockchip,rk808";
+		reg = <0x1b>;
 		clock-output-names = "xin32k", "wifibt_32kin";
 		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int_l>;
-		reg = <0x1b>;
 		rockchip,system-power-controller;
 		wakeup-source;
 		#clock-cells = <1>;
@@ -297,39 +203,41 @@
 		vcc6-supply = <&vcc_5v>;
 		vcc7-supply = <&vcc33_sys>;
 		vcc8-supply = <&vcc33_sys>;
-		vcc9-supply = <&vcc_5v>;
-		vcc10-supply = <&vcc33_sys>;
-		vcc11-supply = <&vcc_5v>;
 		vcc12-supply = <&vcc_18>;
-
 		vddio-supply = <&vcc33_io>;
 
 		regulators {
 			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1450000>;
-				regulator-name = "vdd_arm";
 				regulator-ramp-delay = <6001>;
-				regulator-suspend-mem-disabled;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
 				regulator-ramp-delay = <6001>;
-				regulator-suspend-mem-disabled;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc135_ddr: DCDC_REG3 {
+				regulator-name = "vcc135_ddr";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc135_ddr";
-				regulator-suspend-mem-enabled;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			/*
@@ -340,12 +248,15 @@
 			 * power measurement purposes).
 			 */
 			vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
+				regulator-name = "vcc_18";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-				regulator-suspend-mem-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
 			};
 
 			/*
@@ -356,60 +267,47 @@
 			 * (such as danger) they're the same net.
 			 */
 			vcc33_io: LDO_REG1 {
+				regulator-name = "vcc33_io";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc33_io";
-				regulator-suspend-mem-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
 			};
 
 			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-				regulator-suspend-mem-microvolt = <1000000>;
-			};
-
-			vccio_sd: LDO_REG4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-				regulator-suspend-mem-disabled;
-			};
-
-			vcc33_sd: LDO_REG5 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc33_sd";
-				regulator-suspend-mem-disabled;
-			};
-
-			vcc18_codec: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_codec";
-				regulator-suspend-mem-disabled;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
 			};
 
 			vdd10_lcd_pwren_h: LDO_REG7 {
+				regulator-name = "vdd10_lcd_pwren_h";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
-				regulator-name = "vdd10_lcd_pwren_h";
-				regulator-suspend-mem-disabled;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc33_lcd: SWITCH_REG1 {
+				regulator-name = "vcc33_lcd";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc33_lcd";
-				regulator-suspend-mem-disabled;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 		};
 	};
@@ -436,24 +334,6 @@
 	clock-frequency = <100000>;
 	i2c-scl-falling-time-ns = <50>;		/* 10ns measured */
 	i2c-scl-rising-time-ns = <800>;		/* 600ns measured */
-
-	max98090: max98090 at 10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		#sound-dai-cells = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&int_codec>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
 };
 
 &i2c4 {
@@ -462,55 +342,61 @@
 	clock-frequency = <400000>;
 	i2c-scl-falling-time-ns = <50>;		/* 11ns measured */
 	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
-
-	headsetcodec: ts3a227e at 3b {
-		compatible = "ti,ts3a227e";
-		reg = <0x3b>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts3a227e_int_l>;
-		ti,micbias = <7>;		/* MICBIAS = 2.8V */
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	clock-frequency = <100000>;
-	i2c-scl-falling-time-ns = <300>;
-	i2c-scl-rising-time-ns = <1000>;
 };
 
-&i2s {
+&io_domains {
 	status = "okay";
-	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
-};
 
-&io_domains {
-	audio-supply = <&vcc18_codec>;
 	bb-supply = <&vcc33_io>;
 	dvp-supply = <&vcc_18>;
 	flash0-supply = <&vcc18_flashio>;
 	gpio1830-supply = <&vcc33_io>;
 	gpio30-supply = <&vcc33_io>;
 	lcdc-supply = <&vcc33_lcd>;
-	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc18_wl>;
+};
+
+&pwm1 {
 	status = "okay";
 };
 
-&wdt {
+&sdio0 {
 	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc33_sys>;
+	vqmmc-supply = <&vcc18_wl>;
 };
 
-&pwm0 {
+&spi2 {
 	status = "okay";
+
+	rx-sample-delay-ns = <12>;
+
+	spi_flash: flash at 0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
 };
 
-&pwm1 {
+&tsadc {
 	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-temp = <125000>;
 };
 
 &uart0 {
@@ -519,9 +405,6 @@
 	/* Pins don't include flow control by default; add that in */
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	/* We need to go faster than 24MHz, so adjust clock parents / rates */
-	assigned-clocks = <&cru SCLK_UART0>;
-	assigned-clock-rates = <48000000>;
 };
 
 &uart1 {
@@ -530,67 +413,47 @@
 
 &uart2 {
 	status = "okay";
-	reg-shift = <2>;
 };
 
-&vopb {
+&usbphy {
 	status = "okay";
 };
 
-&vopb_mmu {
+&usb_host0_ehci {
 	status = "okay";
-};
 
-&vopl {
-	status = "okay";
+	needs-reset-on-resume;
 };
 
-&vopl_mmu {
+&usb_host1 {
 	status = "okay";
+	snps,need-phy-for-wake;
 };
 
-&edp {
+&usb_otg {
 	status = "okay";
-	rockchip,panel = <&panel>;
+
+	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
+	assigned-clock-parents = <&usbphy0>;
+	dr_mode = "host";
+	snps,need-phy-for-wake;
 };
 
-&hdmi {
+&vopb {
 	status = "okay";
 };
 
-&gpu {
+&vopb_mmu {
 	status = "okay";
 };
 
-&tsadc {
-	tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
-	tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+&wdt {
 	status = "okay";
 };
 
 &pinctrl {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Wake only */
-		&bt_dev_wake_awake
-	>;
-	pinctrl-1 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Sleep only */
-		&bt_dev_wake_sleep
-	>;
-
-	/* Add this for sdmmc pins to SD card */
 	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
 		drive-strength = <8>;
 	};
 
@@ -607,33 +470,15 @@
 		output-low;
 	};
 
-	backlight {
-		bl_en: bl-en {
-			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	buttons {
-		pwr_key_h: pwr-key-h {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	codec {
-		hp_det: hp-det {
-			rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-		int_codec: int-codec {
-			rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-		mic_det: mic-det {
-			rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	emmc {
 		emmc_reset: emmc-reset {
-			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		/*
@@ -641,54 +486,59 @@
 		 * We also have external pulls, so disable the internal ones.
 		 */
 		emmc_clk: emmc-clk {
-			rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>;
 		};
 
 		emmc_cmd: emmc-cmd {
-			rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>;
 		};
 
 		emmc_bus8: emmc-bus8 {
-			rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
-		};
-	};
-
-	headset {
-		ts3a227e_int_l: ts3a227e-int-l {
-			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA4 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA5 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA6 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA7 2 &pcfg_pull_none_drv_8ma>;
 		};
 	};
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			/*
-			 * Causes jerry to hang when probing bus 0
-			 * rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
-			 */
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	reboot {
 		ap_warm_reset_h: ap-warm-reset-h {
-			rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	recovery-switch {
+		rec_mode_l: rec-mode-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	sdio0 {
 		wifi_enable_h: wifienable-h {
-			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		/* NOTE: mislabelled on schematic; should be bt_enable_h */
 		bt_enable_l: bt-enable-l {
-			rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		/*
@@ -696,100 +546,48 @@
 		 * We also have external pulls, so disable the internal ones.
 		 */
 		sdio0_bus4: sdio0-bus4 {
-			rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC5 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC6 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC7 1 &pcfg_pull_none_drv_8ma>;
 		};
 
 		sdio0_cmd: sdio0-cmd {
-			rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>;
 		};
 
 		sdio0_clk: sdio0-clk {
-			rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>;
 		};
 
 		/*
 		 * These pins are only present on very new veyron boards; on
 		 * older boards bt_dev_wake is simply always high.  Note that
-		 * gpio4_26 is a NC on old veyron boards, so it doesn't hurt
+		 * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt
 		 * to map this pin everywhere
 		 */
 		bt_dev_wake_sleep: bt-dev-wake-sleep {
-			rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>;
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>;
 		};
 
 		bt_dev_wake_awake: bt-dev-wake-awake {
-			rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>;
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
 		};
-	};
 
-	sdmmc {
-		/*
-		 * We run sdmmc at max speed; bump up drive strength.
-		 * We also have external pulls, so disable the internal ones.
-		 */
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
-		};
-
-		/*
-		 * Builtin CD line is hooked to ground to prevent JTAG at boot
-		 * (and also to get the voltage rail correct).  Make we
-		 * configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
-		 * think there's a card inserted
-		 */
-		sdmmc_cd_disabled: sdmmc-cd-disabled {
-			rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		/* This is where we actually hook up CD */
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
-			rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		bt_dev_wake: bt-dev-wake {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	tpm {
 		tpm_int_h: tpm-int-h {
-			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	write-protect {
 		fw_wp_ap: fw-wp-ap {
-			rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
-
-&usbphy {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-	needs-reset-on-resume;
-};
-
-&usb_host1 {
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
-};
-- 
2.20.1



More information about the U-Boot mailing list