[PATCH] video: stm32: stm32_ltdc: fix the check of return value of clk_set_rate()

Patrice CHOTARD patrice.chotard at foss.st.com
Wed Feb 23 08:41:10 CET 2022


Hi Patrick

On 2/1/22 14:02, Patrick Delaunay wrote:
> From: Gabriel Fernandez <gabriel.fernandez at foss.st.com>
> 
> The clk_set_rate() function returns rate as an 'ulong' not
> an 'int' and rate > 0 by default.
> 
> This patch avoids to display the associated warning when
> the set rate function returns the new frequency.
> 
> Fixes: aeaf330649e8 ("video: stm32: stm32_ltdc: add bridge to display controller")
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at foss.st.com>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  drivers/video/stm32/stm32_ltdc.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
> index 87e5fd54d9..e741e74739 100644
> --- a/drivers/video/stm32/stm32_ltdc.c
> +++ b/drivers/video/stm32/stm32_ltdc.c
> @@ -338,6 +338,7 @@ static int stm32_ltdc_probe(struct udevice *dev)
>  	struct display_timing timings;
>  	struct clk pclk;
>  	struct reset_ctl rst;
> +	ulong rate;
>  	int ret;
>  
>  	priv->regs = (void *)dev_read_addr(dev);
> @@ -375,13 +376,13 @@ static int stm32_ltdc_probe(struct udevice *dev)
>  		}
>  	}
>  
> -	ret = clk_set_rate(&pclk, timings.pixelclock.typ);
> -	if (ret)
> -		dev_warn(dev, "fail to set pixel clock %d hz\n",
> -			 timings.pixelclock.typ);
> +	rate = clk_set_rate(&pclk, timings.pixelclock.typ);
> +	if (IS_ERR_VALUE(rate))
> +		dev_warn(dev, "fail to set pixel clock %d hz, ret=%ld\n",
> +			 timings.pixelclock.typ, rate);
>  
>  	dev_dbg(dev, "Set pixel clock req %d hz get %ld hz\n",
> -		timings.pixelclock.typ, clk_get_rate(&pclk));
> +		timings.pixelclock.typ, rate);
>  
>  	ret = reset_get_by_index(dev, 0, &rst);
>  	if (ret) {

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice


More information about the U-Boot mailing list