[PATCH v4] apalis/colibri_imx6: move setting bootcmd to defconfig

[Oleksandr Suvorov]

Hi Stefano,

On Mon, Feb 7, 2022 at 1:01 PM Stefano Babic <sbabic at denx.de> wrote:
>
> Hi everybody,
>
> On 16.09.21 12:52, Oleksandr Suvorov wrote:
> > Move setting the default boot command to the
> > apalis/colibri_imx6_defconfig. It allows replacing the command
> > without code modification.
> >
> > Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at foundries.io>
> > Reviewed-by: Peng Fan <peng.fan at nxp.com>
> > Reviewed-by: Igor Opaniuk <igor.opaniuk at foundries.io>
> > Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > ---
>
> I have not applied this, not because I see issue, but because the patch
> requires to be rebased and I did not want to do this and merge without
> test. Could you just rebase it and repost, I will then merge soon.

Sure, no problem. I'll repost the rebased patch soon.

>
> Regards,
> Stefano
>
> >
> > Changes in v4:
> > - add an acked-by record.
> >
> > Changes in v3:
> > - fix Peng Fan's e-mail address.
> >
> > Changes in v2:
> > - fix spaces after semicolon.
> > - add reviewed-by records.
> >
> >   configs/apalis_imx6_defconfig  | 1 +
> >   configs/colibri_imx6_defconfig | 1 +
> >   include/configs/apalis_imx6.h  | 4 ----
> >   include/configs/colibri_imx6.h | 4 ----
> >   4 files changed, 2 insertions(+), 8 deletions(-)
> >
> > diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
> > index a0e85ba23a4..f64b1ca4378 100644
> > --- a/configs/apalis_imx6_defconfig
> > +++ b/configs/apalis_imx6_defconfig
> > @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y
> >   CONFIG_FIT=y
> >   CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> >   CONFIG_BOOTDELAY=1
> > +CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd"
> >   # CONFIG_DISPLAY_BOARDINFO is not set
> >   CONFIG_DISPLAY_BOARDINFO_LATE=y
> >   CONFIG_BOARD_EARLY_INIT_F=y
> > diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
> > index 47b1cfb1917..373d6476ddc 100644
> > --- a/configs/colibri_imx6_defconfig
> > +++ b/configs/colibri_imx6_defconfig
> > @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
> >   CONFIG_FIT=y
> >   CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> >   CONFIG_BOOTDELAY=1
> > +CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd"
> >   # CONFIG_DISPLAY_BOARDINFO is not set
> >   CONFIG_DISPLAY_BOARDINFO_LATE=y
> >   CONFIG_BOARD_EARLY_INIT_F=y
> > diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
> > index 12de0105c6c..ade479cb943 100644
> > --- a/include/configs/apalis_imx6.h
> > +++ b/include/configs/apalis_imx6.h
> > @@ -133,10 +133,6 @@
> >   #endif
> >   #define CONFIG_EXTRA_ENV_SETTINGS \
> >       BOOTENV \
> > -     "bootcmd=run distro_bootcmd ; " \
> > -             "usb start ; " \
> > -             "setenv stdout serial,vidconsole; " \
> > -             "setenv stdin serial,usbkbd\0" \
> >       "boot_file=zImage\0" \
> >       "console=ttymxc0\0" \
> >       "defargs=enable_wait_mode=off vmalloc=400M\0" \
> > diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
> > index 804a144a03e..f91d6b49ea8 100644
> > --- a/include/configs/colibri_imx6.h
> > +++ b/include/configs/colibri_imx6.h
> > @@ -115,10 +115,6 @@
> >   #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
> >   #define CONFIG_EXTRA_ENV_SETTINGS \
> >       BOOTENV \
> > -     "bootcmd=run distro_bootcmd; " \
> > -             "usb start ; " \
> > -             "setenv stdout serial,vidconsole; " \
> > -             "setenv stdin serial,usbkbd\0" \
> >       "boot_file=zImage\0" \
> >       "console=ttymxc0\0" \
> >       "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
>
>
> --
> =====================================================================
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> =====================================================================



-- 
Best regards
Oleksandr

Oleksandr Suvorov
cryosay at gmail.com