[PATCH] arm64: zynqmp: Remove SOM *u-boot.dtsi

[Michal Simek]

st 19. 1. 2022 v 12:01 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> Disable mmc from u-boot.dtsi file because it was there only for kv260
> board. With kr260 this is not needed because we will switch to full DT per
> board with SD/EMMC there too.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi  | 21 --------------------
>  arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi | 21 --------------------
>  2 files changed, 42 deletions(-)
>  delete mode 100644 arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
>  delete mode 100644 arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
>
> diff --git a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
> deleted file mode 100644
> index 467df9f23a1c..000000000000
> --- a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * dts file for Xilinx ZynqMP K26/KV260 SD wiring
> - *
> - * (C) Copyright 2020 - 2021, Xilinx, Inc.
> - *
> - * Michal Simek <michal.simek at xilinx.com>
> - */
> -
> -/* SD0 only supports 3.3V, no level shifter */
> -&sdhci1 { /* on CC - MIO 39 - 51 */
> -       status = "okay";
> -       no-1-8-v;
> -       disable-wp;
> -       broken-cd;
> -       xlnx,mio-bank = <1>;
> -       /* Do not run SD in HS mode from bootloader */
> -       sdhci-caps-mask = <0 0x200000>;
> -       sdhci-caps = <0 0>;
> -       max-frequency = <19000000>;
> -};
> diff --git a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
> deleted file mode 100644
> index 34e6328fb66f..000000000000
> --- a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * dts file for Xilinx ZynqMP Z2-VSOM
> - *
> - * (C) Copyright 2020 - 2021, Xilinx, Inc.
> - *
> - * Michal Simek <michal.simek at xilinx.com>
> - */
> -
> -/* SD0 only supports 3.3V, no level shifter */
> -&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */
> -       status = "okay";
> -       no-1-8-v;
> -       disable-wp;
> -       broken-cd;
> -       xlnx,mio-bank = <1>;
> -       /* Do not run SD in HS mode from bootloader */
> -       sdhci-caps-mask = <0 0x200000>;
> -       sdhci-caps = <0 0>;
> -       max-frequency = <19000000>;
> -};
> --
> 2.34.1
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs