[PATCH] spi: dw: Fix broken dw_spi_mem_ops()

[Jagan Teki]

On Wed, Feb 9, 2022 at 4:22 AM Niklas Cassel <Niklas.Cassel at wdc.com> wrote:
>
> From: Niklas Cassel <niklas.cassel at wdc.com>
>
> The driver is currently using sizeof(op->cmd.opcode) in the op_len
> calculation. Commit d15de623013c ("spi: spi-mem: allow specifying a
> command's extension") changed op->cmd.opcode from one byte to two.
>
> Instead, a new struct member op->cmd.nbytes is supposed to be used.
> For regular commands op->cmd.nbytes will be one.
>
> Commit d15de623013c ("spi: spi-mem: allow specifying a command's
> extension") did update some drivers that overload the generic mem_ops()
> implementation, but forgot to update dw_spi_mem_ops().
>
> Calculating op_len incorrectly causes dw_spi_mem_ops() to misbehave, since
> op_len is used to determine how many bytes that should be read/written.
>
> On the canaan k210 board, this causes the probe of the SPI flash to fail.
>
> Fix the op_len calculation in dw_spi_mem_ops(). Doing so results in
> working SPI flash on the canaan k210 board.
>
> Fixes: d15de623013c ("spi: spi-mem: allow specifying a command's extension")
> Signed-off-by: Niklas Cassel <niklas.cassel at wdc.com>
> ---

Applied to u-boot-spi/master