[PATCH 1/2] ARM: imx: imx8m: Add 933 MHz PLL settings

Marek Vasut marex at denx.de
Sat Feb 26 04:37:41 CET 2022


Add settings for operating PLL at 933 MHz. This setting is useful in
case the LPDDR4 DRAM should operate at 1866 MHz or 3733 MT/s.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at denx.de>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/mach-imx/imx8m/clock_imx8mm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 76132defc21..4db55f86081 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -48,6 +48,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 #ifdef CONFIG_SPL_BUILD
 static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = {
 	PLL_1443X_RATE(1000000000U, 250, 3, 1, 0),
+	PLL_1443X_RATE(933000000U, 311, 4, 1, 0),
 	PLL_1443X_RATE(800000000U, 300, 9, 0, 0),
 	PLL_1443X_RATE(750000000U, 250, 8, 0, 0),
 	PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
-- 
2.34.1



More information about the U-Boot mailing list