[PATCH 3/3] configs: evb-ast2[56]00: Enable GPIO control

[Andrew Jeffery]

Build in the driver for the Aspeed GPIO controller and turn on the
`gpio` shell command.

Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
 configs/evb-ast2500_defconfig | 3 +++
 configs/evb-ast2600_defconfig | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig
index ea001851cac1..26743fc8f5a6 100644
--- a/configs/evb-ast2500_defconfig
+++ b/configs/evb-ast2500_defconfig
@@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_EVB_AST2500=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ast2500-evb"
 CONFIG_PRE_CON_BUF_ADDR=0x1e720000
 CONFIG_SYS_LOAD_ADDR=0x83000000
@@ -18,6 +19,7 @@ CONFIG_PRE_CONSOLE_BUFFER=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_DHCP=y
@@ -28,6 +30,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_REGMAP=y
 CONFIG_CLK=y
+CONFIG_ASPEED_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_ASPEED=y
 CONFIG_MMC_SDHCI=y
diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
index 172b08e63ccb..1c58f34079e3 100644
--- a/configs/evb-ast2600_defconfig
+++ b/configs/evb-ast2600_defconfig
@@ -11,6 +11,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x10000
+CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x83000000
@@ -39,6 +40,7 @@ CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_DHCP=y
@@ -57,6 +59,7 @@ CONFIG_SPL_CLK=y
 CONFIG_DM_HASH=y
 CONFIG_HASH_ASPEED=y
 CONFIG_ASPEED_ACRY=y
+CONFIG_ASPEED_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_SPL_MISC=y
-- 
2.32.0