[PATCH v2 0/4] Add ESM driver support for AM64x R5 SPL/U-boot

[Hari Nagalla]

AM64x devices have a main ESM and a MCU ESM. The ESM driver enables
routing of the error events from various sources to different processors
or to reset hardware logic. Only the MCU ESM's high output can trigger
reset logic. The main RTI0 WWDT output can be routed to the MCU
highoutput to trigger reset through the main ESM. For this reset to
occur CTRLMMR_MCU_RST_CTRL:MCU_ESM_ERROR_RESET_EN_Z is set to '0'.

AM64x Technical Reference Manual - https://www.ti.com/lit/pdf/spruim2

Hari Nagalla (4):
  misc: k3_esm: Add functionality to set and route error events within
    K3SoC
  arm: dts: k3-am64: Add support for ESM device nodes
  arch: arm: mach-k3: am642_init: Probe ESM nodes
  configs: am64x_evm_r5_defconfig: Add support for ESM

 arch/arm/dts/k3-am64.dtsi        |  1 +
 arch/arm/dts/k3-am642-r5-evm.dts | 19 ++++++++++++
 arch/arm/dts/k3-am642-r5-sk.dts  | 19 ++++++++++++
 arch/arm/mach-k3/am642_init.c    | 29 ++++++++++++++---
 configs/am64x_evm_r5_defconfig   |  1 +
 drivers/misc/k3_esm.c            | 53 ++++++++++++++++++++++++++++++--
 6 files changed, 115 insertions(+), 7 deletions(-)

-- 
2.17.1