[PATCH v3] ARM: imx: imx8mn-*-evk: use DM settings for PHY configuration
marex at denx.de
Thu Feb 24 05:06:01 CET 2022
On 2/23/22 09:10, Heiko Thiery wrote:
> With the correct settings described in the device-tree the PHY settings
> in the board init are no longer required. The values are taken from the
> linux device tree.
> The PHY latency settings are derived from the phy-mode property and the
> voltage seetings are done via the regulator.
> Suggested-by: Michael Walle <michael at walle.cc>
> Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>
Tested-by: Marek Vasut <marex at denx.de> # 8MNANOD4-EVK
More information about the U-Boot