[PATCH v3 11/16] arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux

[Vladimir Oltean]

In a bit of a blunder, the blamed commit in the Fixes: tag below made
the mscc_felix switch driver look at the 'managed = "in-band-status"'
device tree property, forgetting that the U-Boot device tree had not
been updated to include that property, whereas the Linux one does.

The switch is therefore described in the device tree as not requiring
in-band autoneg, but the PHY driver for VSC8514 (drivers/net/phy/mscc.c)
still enables that feature. This results in a mismatch => no traffic.

This patch is a copy-paste of the Ethernet device tree nodes from Linux,
which resolves that issue. The device tree update also renames the
Ethernet PHY labels.

Fixes: e3789a726269 ("net: dsa: felix: configure the in-band autoneg property based on OF node info")
Cc: Ramon Fried <rfried.dev at gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain at nxp.com>
---
v1->v3: none

 arch/arm/dts/fsl-ls1028a-rdb.dts | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index 11bf7e5f627d..b5e56b1c1f15 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -45,33 +45,33 @@
 };
 
 &enetc_mdio_pf3 {
-	status = "okay";
-	rdb_phy0: phy at 2 {
-		reg = <2>;
+	sgmii_phy0: ethernet-phy at 2 {
+		reg = <0x2>;
 	};
 
-	/* VSC8514 QSGMII PHY */
-	sw_phy0: phy at 10 {
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy at 10 {
 		reg = <0x10>;
 	};
 
-	sw_phy1: phy at 11 {
+	qsgmii_phy1: ethernet-phy at 11 {
 		reg = <0x11>;
 	};
 
-	sw_phy2: phy at 12 {
+	qsgmii_phy2: ethernet-phy at 12 {
 		reg = <0x12>;
 	};
 
-	sw_phy3: phy at 13 {
+	qsgmii_phy3: ethernet-phy at 13 {
 		reg = <0x13>;
 	};
 };
 
 &enetc_port0 {
-	status = "okay";
+	phy-handle = <&sgmii_phy0>;
 	phy-mode = "sgmii";
-	phy-handle = <&rdb_phy0>;
+	managed = "in-band-status";
+	status = "okay";
 };
 
 &enetc_port2 {
@@ -158,28 +158,32 @@
 
 &mscc_felix_port0 {
 	label = "swp0";
-	phy-handle = <&sw_phy0>;
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
 	status = "okay";
 };
 
 &mscc_felix_port1 {
 	label = "swp1";
-	phy-handle = <&sw_phy1>;
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
 	status = "okay";
 };
 
 &mscc_felix_port2 {
 	label = "swp2";
-	phy-handle = <&sw_phy2>;
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
 	status = "okay";
 };
 
 &mscc_felix_port3 {
 	label = "swp3";
-	phy-handle = <&sw_phy3>;
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
 	status = "okay";
 };
-- 
2.25.1