January 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Jan 1 05:51:49 CET 2022
Ending: Mon Jan 31 23:59:30 CET 2022
Messages: 3123

• Please pull u-boot-video/next   Tom Rini
• [PATCH] imx6: Enable ACTLR.SMP in SPL   Sven Schwermer
• [PATCH v2 1/7] common: spl: move armv7m-specific code to spl_perform_fixups()   Ovidiu Panait
• [PATCH v2 2/7] common: remove bedbug debugger support   Ovidiu Panait
• [PATCH v2 3/7] common: board_r: drop initr_kgdb wrapper   Ovidiu Panait
• [PATCH v2 4/7] common: board_r: drop initr_addr_map wrapper   Ovidiu Panait
• [PATCH v2 5/7] common: board_r: move init_addr_map() to init.h   Ovidiu Panait
• [PATCH v2 6/7] common: board_r: include asm-generic/gpio.h   Ovidiu Panait
• [PATCH v2 7/7] common: board_r: drop ifdefs around header includes   Ovidiu Panait
• [PATCH v2 1/2] cmd: source: Use script from default config   Sven Schwermer
• [PATCH v2 2/2] f_sdp: Retry sourcing default FIT script   Sven Schwermer
• [RESEND PATCH] imx: Enable ACTLR.SMP in SPL for i.MX6   Sven Schwermer
• [PATCH] Makefile: imx: Do not call arch/arm/mach-imx flash.bin generation if BINMAN enabled   Marek Vasut
• [PATCH] Revert "clk: Detect failure to set defaults"   Marek Vasut
• CONFIG_SYS_SPL_ARGS_ADDR   Sven Schwermer
• [PATCH] net: eth-phy: Demote missing phy-handle log message to debug   Marek Vasut
• [RESEND PATCH] imx: Enable ACTLR.SMP in SPL for i.MX6   Fabio Estevam
• [PATCH v8 01/12] tools: mkeficapsule: rework the code a little bit   Heinrich Schuchardt
• [PATCH] Revert "clk: Detect failure to set defaults"   Sean Anderson
• [PATCH v8 02/12] tools: build mkeficapsule with tools-only_defconfig   Heinrich Schuchardt
• [PATCH v8 03/12] tools: mkeficapsule: add firmwware image signing   Heinrich Schuchardt
• kwboot: Marvell Dove UART booting   Pali Rohár
• [PATCH v8 04/12] tools: mkeficapsule: add man page   Heinrich Schuchardt
• [PATCH v8 05/12] doc: update UEFI document for usage of mkeficapsule   Heinrich Schuchardt
• [PATCH v8 06/12] test/py: efi_capsule: add image authentication test   Heinrich Schuchardt
• [PATCH v8 07/12] tools: mkeficapsule: allow for specifying GUID explicitly   Heinrich Schuchardt
• [PATCH v8 12/12] (RFC) efi_loader, dts: add public keys for capsules to device tree   Heinrich Schuchardt
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Pali Rohár
• help on udoo_neo power up on mainline uboot   Tommaso Merciai
• [PATCH 2/3] efi: ECPT add EBBRv2.0 conformance profile   Heinrich Schuchardt
• kwboot: Marvell Dove UART booting   Tony Dinh
• kwboot: Marvell Dove UART booting   Pali Rohár
• help on udoo_neo power up on mainline uboot   Fabio Estevam
• [PATCH 0/3] Add PCIe support for Iomega iConnect board   Tony Dinh
• [PATCH 1/3] arm: kirkwood: iConnect : Add PCIe related configs   Tony Dinh
• [PATCH 2/3] arm: kirkwood: iConnect : Add PCIe late init   Tony Dinh
• [PATCH 3/3] arm: kirkwood: iConnect : Update board maintainer   Tony Dinh
• [RFC v2 15/20] efi_loader: disk: a helper function to create efi_disk objects from udevice   Heinrich Schuchardt
• [RFC v2 19/20] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI) devices   Heinrich Schuchardt
• [PATCH] net: eth-phy: Demote missing phy-handle log message to debug   Ramon Fried
• [RFC v2 11/20] dm: add event notification   Heinrich Schuchardt
• [RFC v2 05/20] mmc: call device_probe() after scanning   Heinrich Schuchardt
• [PATCH v2] efi_loader: Get rid of kaslr-seed   Heinrich Schuchardt
• [PATCH] env: fat: Add new lines at the end of print statements   Peter Robinson
• [PATCH v3] phy: Track power-on and init counts in uclass   Peter Robinson
• [PATCH v2] console: usb: kbd: Limit poll frequency to improve performance   Mark Kettenis
• [PATCH v2] console: usb: kbd: Limit poll frequency to improve performance   Mark Kettenis
• [RFC Patch v2] binman: add support for creating dummy files for external blobs   Simon Glass
• help on udoo_neo power up on mainline uboot   Tommaso Merciai
• [PATCH] net: fsl_mdio: Fix busy flag polling register   Markus Koch
• help on udoo_neo power up on mainline uboot   Fabio Estevam
• [PATCH] udoo_neo: fix udoo neo UNDEFINED   Tommaso Merciai
• help on udoo_neo power up on mainline uboot   Tommaso Merciai
• [PATCH] udoo_neo: fix udoo neo UNDEFINED   Fabio Estevam
• [PATCH v2] imx: Enable ACTLR.SMP in SPL for i.MX6/7   Sven Schwermer
• [PATCH v2] efi_loader: Get rid of kaslr-seed   Ilias Apalodimas
• [PATCH v2] efi_loader: Get rid of kaslr-seed   Heinrich Schuchardt
• [PATCH v2] efi_loader: Get rid of kaslr-seed   Mark Kettenis
• [PATCH] udoo_neo: fix udoo neo UNDEFINED   Tommaso Merciai
• [PING][PATCH v3] pci: Work around PCIe link training failures   Maciej W. Rozycki
• [PATCH v2] udoo_neo: fix udoo neo UNDEFINED   Tommaso Merciai
• [PATCH] udoo_neo: fix udoo neo UNDEFINED   Tommaso Merciai
• [PATCH v1] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [PATCH v2] udoo_neo: fix udoo neo UNDEFINED   Fabio Estevam
• [PATCH v2] efi_loader: Get rid of kaslr-seed   Ilias Apalodimas
• [PATCH v2] efi_loader: Get rid of kaslr-seed   Ilias Apalodimas
• [PATCH 1/5] DFU: Do not copy the entity name over the buffer size   Ilias Apalodimas
• How should I set load_address for fdt in the .its file...   Chan Kim
• [PATCH v6 1/4] mtd: spi-nor: macronix: add support for Macronix Octal   Miquel Raynal
• [RFC v2 05/20] mmc: call device_probe() after scanning   Jaehoon Chung
• [PATCH v6 1/4] mtd: spi-nor: macronix: add support for Macronix Octal   Tudor.Ambarus at microchip.com
• [PATCH v6 3/4] mtd: spi-nor-core: Add support for Macronix Octal flash   Tudor.Ambarus at microchip.com
• [PATCH v2] riscv: cancel the limitation that NR_CPUS is less than or equal to 32   Leo Liang
• [PATCH v2] imx: Enable ACTLR.SMP in SPL for i.MX6/7   Fabio Estevam
• [PATCH v2] rockchip: puma/lion: update MAINTAINERS file   quentin.schulz at theobroma-systems.com
• [PATCH v3] efi_loader: Get rid of kaslr-seed if EFI_RNG_PROTOCOL is installed   Ilias Apalodimas
• [PATCH v2] rockchip: puma/lion: update MAINTAINERS file   Philipp Tomsich
• [PATCH] arm: dts: rk3399-puma: re-add vdd_log for uboot   Quentin Schulz
• [PATCH v3] efi_loader: Get rid of kaslr-seed if EFI_RNG_PROTOCOL is installed   Mark Kettenis
• [PATCH v3 00/16] Sync NXP LS1028A-RDB device trees between U-Boot and Linux   Vladimir Oltean
• [PATCH v3 01/16] i2c: muxes: pca954x: add PCA9847 variant   Vladimir Oltean
• [PATCH v3 02/16] rtc: pcf2127: sync with Linux compatible strings   Vladimir Oltean
• [PATCH v3 03/16] arm: dts: ls1088a-qds: use Linux compatible string for RTC   Vladimir Oltean
• [PATCH v3 04/16] arm: dts: ls1088a-rdb: use Linux compatible string for RTC   Vladimir Oltean
• [PATCH v3 05/16] arm: dts: lx2160a-qds: use Linux compatible string for RTC   Vladimir Oltean
• [PATCH v3 06/16] arm: dts: ls1028a-qds: use Linux compatible string for RTC   Vladimir Oltean
• [PATCH v3 07/16] arm: dts: ls1028a-rdb: use Linux compatible string for RTC   Vladimir Oltean
• [PATCH v3 08/16] arm: dts: lx2160a-rdb: use Linux compatible string for RTC   Vladimir Oltean
• [PATCH v3 09/16] rtc: pcf2127: remove U-Boot specific compatible string   Vladimir Oltean
• [PATCH v3 10/16] arm: dts: ls1028a-rdb: sort nodes alphabetically   Vladimir Oltean
• [PATCH v3 11/16] arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux   Vladimir Oltean
• [PATCH v3 12/16] arm: dts: ls1028a-rdb: disable DSPI nodes   Vladimir Oltean
• [PATCH v3 13/16] arm: dts: ls1028a-rdb: disable I2C buses 1 through 7   Vladimir Oltean
• [PATCH v3 14/16] arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi   Vladimir Oltean
• [PATCH v3 15/16] arm: dts: ls1028a-rdb: sync device tree with Linux   Vladimir Oltean
• [PATCH v3 16/16] arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports   Vladimir Oltean
• [PATCH v2 1/1] fastboot: fb_getvar: Add getvar_logical_blocksize for NXP mfgtool   Angus Ainslie
• [PATCH v3 01/16] i2c: muxes: pca954x: add PCA9847 variant   Michael Walle
• [PATCH v3 02/16] rtc: pcf2127: sync with Linux compatible strings   Michael Walle
• [PATCH v3 03/16] arm: dts: ls1088a-qds: use Linux compatible string for RTC   Michael Walle
• [PATCH v3 04/16] arm: dts: ls1088a-rdb: use Linux compatible string for RTC   Michael Walle
• [PATCH v3 05/16] arm: dts: lx2160a-qds: use Linux compatible string for RTC   Michael Walle
• [PATCH v3 06/16] arm: dts: ls1028a-qds: use Linux compatible string for RTC   Michael Walle
• [PATCH v3 07/16] arm: dts: ls1028a-rdb: use Linux compatible string for RTC   Michael Walle
• [PATCH v3 08/16] arm: dts: lx2160a-rdb: use Linux compatible string for RTC   Michael Walle
• [PATCH v3 09/16] rtc: pcf2127: remove U-Boot specific compatible string   Michael Walle
• [PATCH v3 14/16] arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi   Michael Walle
• [PATCH v3 15/16] arm: dts: ls1028a-rdb: sync device tree with Linux   Michael Walle
• [PATCH 1/2] udoo: neo: Fix the board model printing   Fabio Estevam
• [PATCH 2/2] udoo: neo: Do not print the Model information   Fabio Estevam
• [PATCH] arm: dts: rk3399-puma: re-add vdd_log for uboot   Heiko Stübner
• [RFC PATCH 5/5] Convert CONFIG_AT91_EFLASH to Kconfig   Patrick DELAUNAY
• [PATCH v6 0/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   Ariel D'Alessandro
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Tim Harvey
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH v3 00/12] fsl_esdhc_imx: port several patches from fsl_esdhc   Jaehoon Chung
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Tim Harvey
• [PATCH] net: fsl_mdio: Fix busy flag polling register   Ramon Fried
• [EXT] Re: [PATCH v7 05/15] i.MX6: Enable Job ring driver model in U-Boot.   Gaurav Jain
• [PATCH] dm: Fix OF_BAD_ADDR definition   Patrice CHOTARD
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Patrice Chotard
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Michael Walle
• [PATCH v2 2/7] common: remove bedbug debugger support   Thomas Huth
• [PATCH] LynxOS is no longer supported   Thomas Huth
• [PATCH v2] arm: dts: Aspeed: add Bletchley dts   Potin Lai
• [PATCH v9 0/9] efi: Improvements to U-Boot running on top of UEFI   Simon Glass
• [PATCH v9 1/9] efi: Move exit_boot_services into a function   Simon Glass
• [PATCH v9 2/9] x86: efi: Update efi_get_next_mem_desc() to avoid needing a map   Simon Glass
• [PATCH v9 3/9] efi: Support the efi command in the app   Simon Glass
• [PATCH v9 4/9] x86: efi: Tweak the code used for the 64-bit EFI app   Simon Glass
• [PATCH v9 5/9] x86: efi: Round out the link script for 64-bit EFI   Simon Glass
• [PATCH v9 6/9] x86: efi: Don't use the 64-bit link script for the EFI app   Simon Glass
• [PATCH v9 7/9] x86: efi: Set the correct link flags for the 64-bit EFI app   Simon Glass
• [PATCH v9 8/9] efi: Build the 64-bit app properly   Simon Glass
• [PATCH v9 9/9] efi: Tidy up some comments in efi header   Simon Glass
• [PATCH v8 12/25] efi: Move exit_boot_services into a function   Simon Glass
• [PATCH v8 16/25] efi: Allow easy selection of serial-only operation   Simon Glass
• [PATCH v8 19/25] x86: efi: Show the system-table revision   Simon Glass
• [RFC PATCH v3 5/5] phytec: phycore_imx8mp: override env_get_location in phycore-imx8mp.c   Teresa Remmet
• [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp   Teresa Remmet
• [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp   Michael Nazzareno Trimarchi
• [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp   Teresa Remmet
• [PATCH v1 0/5] configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig   Patrick Delaunay
• [PATCH v1 1/5] cmd: Fix up warnings in flash.c   Patrick Delaunay
• [PATCH v1 2/5] mtd: cfi: introduce CFI_FLASH_BANKS   Patrick Delaunay
• [PATCH v1 3/5] mtd: cfi: change CONFIG_SYS_MAX_FLASH_BANKS_DETECT as boolean   Patrick Delaunay
• [PATCH v1 4/5] configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig   Patrick Delaunay
• [PATCH v1 5/5] Convert CONFIG_AT91_EFLASH to Kconfig   Patrick Delaunay
• [PATCH v6 0/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   Tom Rini
• [PATCH v6 0/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   Ariel D'Alessandro
• [PATCH v2 2/7] common: remove bedbug debugger support   Simon Glass
• [RFC Patch v2] binman: add support for creating dummy files for external blobs   Heiko Thiery
• [PATCH] net: fsl_mdio: Fix busy flag polling register   Ioana Ciornei
• [PATCH u-boot-marvell] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode determination   Marek Behún
• [PATCH u-boot-marvell] board: gdsys: Drop Dirk Eibach from MAINTAINERS   Marek Behún
• [PATCH u-boot-marvell] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode determination   Marek Behún
• [PATCH v2] net: fsl_mdio: Fix busy flag polling register   Markus Koch
• [RESEND PATCH v3 01/12] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC   Sean Anderson
• [PATCH] lib: Kconfig: fix PHANDLE_CHECK_SEQ position outside of menu   Eugen Hristev
• [PATCH v2 1/1] fastboot: fb_getvar: Add getvar_logical_blocksize for NXP mfgtool   Sean Anderson
• [PATCH] patman: expand user home when looking for the alias file   Otavio Salvador
• [PATCH 1/4] i2c: at91: add compatible with microchip,sama7g5-i2c   Eugen Hristev
• [PATCH 2/4] ARM: dts: at91: sama7g5: add flx8 and required nodes   Eugen Hristev
• [PATCH 3/4] ARM: dts: at91: sama7g5ek: move eeproms to flexcom8   Eugen Hristev
• [PATCH 4/4] configs: at91: sama7g5ek: enable CONFIG_PHANDLE_CHECK_SEQ   Eugen Hristev
• [PATCH] usb: xhci: reset endpoint on USB stall   Stefan Agner
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behún
• [PATCH u-boot-marvell 0/9] mvebu: Move PCIe code from serdes to PCIe driver   Pali Rohár
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH u-boot-marvell] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode determination   Chris Packham
• mkimage_fit_atf.sh: not found   Tim Harvey
• mkimage_fit_atf.sh: not found   Fabio Estevam
• [PATCH v2] arm: dts: Aspeed: add Bletchley dts   Patrick Williams
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Jesse Taube
• [PATCH 01/11] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code   Jesse Taube
• [PATCH 02/11] arm: arm926ej-s: add sunxi code   Jesse Taube
• [PATCH 03/11] dt-bindings: clock: Add initial suniv headers   Jesse Taube
• [PATCH 04/11] dt-bindings: reset: Add initial suniv headers   Jesse Taube
• [PATCH 05/11] ARM: sunxi: Add support for F1C100s   Jesse Taube
• [PATCH 06/11] sunxi: Add F1C100s DRAM initial support   Jesse Taube
• [PATCH 07/11] sunxi: board: Add support for SUNIV   Jesse Taube
• [PATCH 08/11] configs: sunxi: Add common SUNIV header   Jesse Taube
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH 10/11] ARM: dts: suniv: Add device tree files for F1C100s   Jesse Taube
• [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano   Jesse Taube
• [PATCH V2 1/7] tools: imx8mimage: not abort when mmap fail   Ryan
• [PATCH] riscv: sifive: Fix OF_BOARD boot failure   Bin Meng
• [PATCH] usb: xhci: reset endpoint on USB stall   Bin Meng
• [PATCH v2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [PATCH] riscv: sifive: Fix OF_BOARD boot failure   Ilias Apalodimas
• [PATCH v8 12/25] efi: Move exit_boot_services into a function   Heinrich Schuchardt
• [PATCH v1 1/5] cmd: Fix up warnings in flash.c   Stefan Roese
• [PATCH v1 2/5] mtd: cfi: introduce CFI_FLASH_BANKS   Stefan Roese
• [PATCH v1 3/5] mtd: cfi: change CONFIG_SYS_MAX_FLASH_BANKS_DETECT as boolean   Stefan Roese
• [PATCH v1 4/5] configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig   Stefan Roese
• [PATCH v1 5/5] Convert CONFIG_AT91_EFLASH to Kconfig   Stefan Roese
• [PATCH u-boot-marvell] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode determination   Stefan Roese
• [PATCH u-boot-marvell] board: gdsys: Drop Dirk Eibach from MAINTAINERS   Stefan Roese
• efi bootmenu   Heinrich Schuchardt
• [PATCH v1 5/5] Convert CONFIG_AT91_EFLASH to Kconfig   Eugen.Hristev at microchip.com
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behún
• [PATCH] versal: Return ENVL_NOWHERE instead of ENVL_UNKNOWN   Michal Simek
• [PATCH] dt-bindings: versal: Add new PM_DEV_I2C_PMC macro   Michal Simek
• [PATCH v2] net: zynq: Add support for mdio bus address decoding   Michal Simek
• [PATCH v2] net: zynq: Add support for GEM reset   Michal Simek
• [PATCH v3] net: zynq: Add support for PHY configuration in SGMII mode   Michal Simek
• [PATCH] net: gem: Reduce timeout of mdio phy idle status check   Michal Simek
• [PATCH u-boot-pci] pci: iproc: Set all 24 bits of PCI class code   Pali Rohár
• [PATCH 1/4] i2c: at91: add compatible with microchip,sama7g5-i2c   Michael Walle
• [PATCH] lib: Kconfig: fix PHANDLE_CHECK_SEQ position outside of menu   Aswath Govindraju
• [PATCH 1/4] i2c: at91: add compatible with microchip,sama7g5-i2c   Eugen.Hristev at microchip.com
• [PATCH 1/4] i2c: at91: add compatible with microchip,sama7g5-i2c   Michael Walle
• [PATCH 1/4] i2c: at91: add compatible with microchip,sama7g5-i2c   Eugen.Hristev at microchip.com
• [PATCH] i2c: at91: add compatible with microchip,sam9x60-i2c   Eugen Hristev
• mkimage_fit_atf.sh: not found   ZHIZHIKIN Andrey
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Icenowy Zheng
• [PATCH v2 07/10] dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes   Amjad Ouled-Ameur
• [PATCH v2 0/3] fs/erofs: new filesystem   Gao Xiang
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Andre Przywara
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Jesse Taube
• [RFC Patch v3] binman: add support for creating dummy files for external blobs   Heiko Thiery
• mkimage_fit_atf.sh: not found   Tom Rini
• [PATCH] nitrogen6x: add missing pinctrl to fix mmc   Gary Bisson
• [PATCH] nitrogen6x: add missing pinctrl to fix mmc   Fabio Estevam
• [PATCH] riscv: sifive: Fix OF_BOARD boot failure   Simon Glass
• [PATCH v2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Simon Glass
• [PATCH] lib: Kconfig: fix PHANDLE_CHECK_SEQ position outside of menu   Simon Glass
• [RFC Patch v2] binman: add support for creating dummy files for external blobs   Simon Glass
• [RFC Patch v2] binman: add support for creating dummy files for external blobs   Heiko Thiery
• [PATCH] mtd: nand: pxa3xx: set mtd->dev   Robert Marko
• [PATCH] tools: kwbimage: Fix checksum calculation for v1 images   Stefan Roese
• [PATCH] mtd: nand: pxa3xx: set mtd->dev   Stefan Roese
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Giulio Benetti
• [RFC Patch v3] binman: add support for creating dummy files for external blobs   Simon Glass
• [PATCH v2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [RFC Patch v3] binman: add support for creating dummy files for external blobs   Simon Glass
• [PATCH u-boot-pci] pci: iproc: Set all 24 bits of PCI class code   Roman Bacik
• [PATCH] tools: kwbimage: Fix checksum calculation for v1 images   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH v4 4/6] ARM: dts: s700: add MMC/SD controller node   Tom Rini
• [PATCH] board: ast2500/ast2600: initialize LEDs   Tom Rini
• mkimage_fit_atf.sh: not found   Tim Harvey
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH] Revert "clk: Detect failure to set defaults"   Marek Vasut
• [PATCH] Revert "clk: Detect failure to set defaults"   Tom Rini
• [PATCH] Revert "clk: Detect failure to set defaults"   Marek Vasut
• [PATCH] Revert "clk: Detect failure to set defaults"   Sean Anderson
• [PATCH v2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [PATCH] Revert "clk: Detect failure to set defaults"   Fabio Estevam
• [PATCH 2/2] udoo: neo: Do not print the Model information   Tommaso Merciai
• [PATCH 2/2] udoo: neo: Do not print the Model information   Fabio Estevam
• [PATCH] Revert "clk: Detect failure to set defaults"   Tom Rini
• [PATCH 2/2] udoo: neo: Do not print the Model information   Tommaso Merciai
• mkimage_fit_atf.sh: not found   Marcel Ziswiler
• mkimage_fit_atf.sh: not found   Tom Rini
• mkimage_fit_atf.sh: not found   Marcel Ziswiler
• mkimage_fit_atf.sh: not found   Tom Rini
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH v6 1/4] mtd: spi-nor: macronix: add support for Macronix Octal   liao jaime
• [PATCH v6 1/4] mtd: spi-nor: macronix: add support for Macronix Octal   liao jaime
• efi bootmenu   AKASHI Takahiro
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH 1/2] ARM: mvebu: x530: set MPP55 to gpio   Chris Packham
• [PATCH 2/2] ARM: mvebu: x530: Add option for ECC   Chris Packham
• [PATCH] riscv: sifive: Fix OF_BOARD boot failure   Bin Meng
• [PATCH 1/2] fsl-layerscape: add dtb overlay feature   Sahil Malhotra (OSS)
• [RFC v2 19/20] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI) devices   AKASHI Takahiro
• [PATCH] Revert "clk: Detect failure to set defaults"   Simon Glass
• [PATCH v2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Simon Glass
• [RFC v2 15/20] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH 1/2] fsl-layerscape: add dtb overlay feature   Michael Walle
• [PATCH 1/2] fsl-layerscape: add dtb overlay feature   François Ozog
• [PATCH v3] phy: zynqmp: Add serdes/psgtr driver   Michal Simek
• [PATCH v8 01/12] tools: mkeficapsule: rework the code a little bit   AKASHI Takahiro
• [PATCH v8 02/12] tools: build mkeficapsule with tools-only_defconfig   AKASHI Takahiro
• mkimage_fit_atf.sh: not found   ZHIZHIKIN Andrey
• [PATCH v8 04/12] tools: mkeficapsule: add man page   AKASHI Takahiro
• efi bootmenu   Masahisa Kojima
• [PATCH v4] binman: add support for creating dummy files for external blobs   Heiko Thiery
• [PATCH v3 1/2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [PATCH v3 2/2] rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure   Johan Jonker
• [PATCH v4] binman: add support for creating dummy files for external blobs   Simon Glass
• difference between fdtdec and fdt_support ?   Marek Behún
• efi bootmenu   Mark Kettenis
• difference between fdtdec and fdt_support ?   Rasmus Villemoes
• [PATCH] usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable   Gary Bisson
• [PATCH] usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable   Neil Armstrong
• difference between fdtdec and fdt_support ?   Simon Glass
• difference between fdtdec and fdt_support ?   Marek Behún
• difference between fdtdec and fdt_support ?   Simon Glass
• Commit 6337d53fdf breaks PDU001 board   Felix Brack
• difference between fdtdec and fdt_support ?   Marek Behún
• mkimage_fit_atf.sh: not found   Tim Harvey
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• mkimage_fit_atf.sh: not found   Tom Rini
• mkimage_fit_atf.sh: not found   ZHIZHIKIN Andrey
• [PATCH] Revert "tree: imx: remove old fit generator script"   ZHIZHIKIN Andrey
• [PATCH v8 04/12] tools: mkeficapsule: add man page   Heinrich Schuchardt
• [PATCH] usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable   Marek Vasut
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tim Harvey
• mkimage_fit_atf.sh: not found   Heiko Thiery
• [PATCH v1 1/5] kconfig: allow defconfigs to live in board directory   Troy Kisky
• [PATCH v1 2/5] dts: allow dts files in board directory   Troy Kisky
• [PATCH v1 3/5] scripts: Makefile.autoconf: allow CONFIG_SYS_CONFIG_NAME file to live in board directory   Troy Kisky
• [PATCH v1 0/5] Move board specific files to board directory   Troy Kisky
• [PATCH] nitrogen6x: add missing pinctrl to fix mmc   Troy Kisky
• mkimage_fit_atf.sh: not found   Simon Glass
• [PATCH v8 05/12] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v8 04/12] tools: mkeficapsule: add man page   AKASHI Takahiro
• [PATCH] gpio: da8xx_gpio: Fix gpio name with address   chaochao2021666 at 163.com
• [EXT] Re: [PATCH v7 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH] configs: amlogic: Disable CONFIG_NET_RANDOM_ETHADDR when unnecessary   Neil Armstrong
• [PATCH v2 0/4] meson64_android: add support for vim3/vim3l boards   Neil Armstrong
• efi bootmenu   Ilias Apalodimas
• [PATCH u-boot-dm] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• [PATCH u-boot-dm] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• mkimage_fit_atf.sh: not found   Oliver Graute
• [RFC v2 09/20] dm: fix an 'undefined' error in some macros   Ilias Apalodimas
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Marek Behún
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Marek Behún
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Marek Behún
• mkimage_fit_atf.sh: not found   Adam Ford
• [PATCHv3] net: uclass: Save generated ethernet MAC addresses to the environment   Michal Simek
• [PATCH v1 0/5] Move board specific files to board directory   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20220107   Neil Armstrong
• [PATCH] usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable   Mattijs Korpershoek
• [PATCH] dm: core: Switch order of pinctrl and power domain calls   Michal Simek
• [PATCH v2] net: fsl_mdio: Fix busy flag polling register   Camelia Alexandra Groza (OSS)
• [PATCH 0/1] Add support for the Purism Librem5 Phone   Angus Ainslie
• [PATCH 1/1] board: purism: librem5: add the Librem5 phone files   Angus Ainslie
• [PATCH] configs: meson64_android: define raw parts for bootloader   Mattijs Korpershoek
• [PATCH 1/4] udoo_neo: Call gpio_request()   Tom Rini
• [PATCH 2/4] udoo_neo: Fixes for booting from the mSD card   Tom Rini
• [PATCH 3/4] udoo_neo: Fix ethernet   Tom Rini
• [PATCH 4/4] udoo_neo: Enable support for USB and storage   Tom Rini
• [PATCH] Revert "clk: Detect failure to set defaults"   Tom Rini
• [PATCH v2] rockchip: puma/lion: update MAINTAINERS file   Tom Rini
• [PATCH 1/2] udoo: neo: Fix the board model printing   Tom Rini
• [PATCH 2/2] udoo: neo: Do not print the Model information   Tom Rini
• [PATCH] riscv: sifive: Fix OF_BOARD boot failure   Tom Rini
• [PATCH v2 1/5] doc: Add documentation for the Arm VExpress64 board configs   Tom Rini
• [PATCH v2 2/5] vexpress64: Refactor header file to make it easier to add new FVPs   Tom Rini
• [PATCH v2 4/5] vexpress64: Enable OF_CONTROL and OF_BOARD for VExpress64   Tom Rini
• [PATCH v2 5/5] vexpress64: Enable VIRTIO_NET network driver   Tom Rini
• [PATCH] arm: apple: Remove CONFIG_SYS_SDRAM_BASE   Tom Rini
• [PATCH] configs: iot2050: Drop unused CONFIG_OF_LIST from defconfig   Tom Rini
• [PATCH v2] board: stemmy: Increase boot image to 64 MB   Tom Rini
• [PATCH v2 3/5] vexpress64: Clean up BASE_FVP boot configuration   Tom Rini
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tim Harvey
• [PATCH V3] cmd_nandbcb: Support secondary boot address of imx8mn   Michael Trimarchi
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• [PATCH v2] net: fsl_mdio: Fix busy flag polling register   Markus Koch
• [PATCH 1/1] i2c: mvtwsi: Add compatible string for allwinner, sun4i-a10-i2c   Chris Morgan
• [PATCH 1/1] sunxi: Add option to prevent power-on when plug in   Chris Morgan
• [PATCH] Revert "tree: imx: remove old fit generator script"   Adam Ford
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• [PATCH v1 0/5] Move board specific files to board directory   Troy Kisky
• [PATCH v1 1/2] rockchip: mmc: rockchip_dw_mmc: fix ciu clock index   Johan Jonker
• [PATCH v1 2/2] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Johan Jonker
• [PATCH 1/2] board: samsung: fix menu entries for a{3,7}y17lte   Henrik Grimler
• [PATCH 2/2] doc: board: avoid ambiguous names for axy17lte   Henrik Grimler
• Code in arch/arm/lib/image.c doing alignment incorrectly?   Glotzer, John
• [PATCH] Revert "tree: imx: remove old fit generator script"   Adam Ford
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• [RFC/DONOT MERGE PATCH] arm: mach-k3: Enable Serror exception trap at u-boot   Nishanth Menon
• [PATCH 1/6] udoo_spl: Initialize the eSDHC controller in SPL   Fabio Estevam
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tim Harvey
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tim Harvey
• [PATCH] imx8mn_beacon_2g: Switch to binman   Adam Ford
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• [PATCH] Revert "tree: imx: remove old fit generator script"   Adam Ford
• [PATCH] imx8mn_beacon_2g: Switch to binman   Fabio Estevam
• [PATCH 2/2] doc: board: avoid ambiguous names for axy17lte   Dzmitry Sankouski
• [PATCH 1/2] board: phytec: imx8mm-phycore: Remove duplicate binman node   Adam Ford
• [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: Fix binman error   Adam Ford
• [PATCH] Revert "tree: imx: remove old fit generator script"   Adam Ford
• [PATCH 1/2] imx8mm-kontron-n801x-s-u-boot.dtsi: Update for common imx8mm-u-boot.dtsi   Tom Rini
• [PATCH 2/2] phycore-imx8mm-u-boot.dtsi: Update for common imx8mm-u-boot.dtsi   Tom Rini
• [PATCH 1/2] imx8mm-kontron-n801x-s-u-boot.dtsi: Update for common imx8mm-u-boot.dtsi   Fabio Estevam
• [PATCH 1/2] board: phytec: imx8mm-phycore: Remove duplicate binman node   Fabio Estevam
• [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: Fix binman error   Fabio Estevam
• [RESEND PATCH v3] imx8mm_venice: switch to use binman to pack images   Tim Harvey
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tim Harvey
• [PATCH] Revert "tree: imx: remove old fit generator script"   Marcel Ziswiler
• [PATCH 1/2] imx8mm-kontron-n801x-s-u-boot.dtsi: Update for common imx8mm-u-boot.dtsi   Tom Rini
• [PATCH] Revert "tree: imx: remove old fit generator script"   Tom Rini
• [PATCH] Revert "tree: imx: remove old fit generator script"   Adam Ford
• [PATCH] Revert "tree: imx: remove old fit generator script"   Marcel Ziswiler
• [PATCH] patman: Support absolute and ~user-relative alias files   Brian Norris
• [PATCH v3 4/7] arm64: dts: imx8mm: use common binman configuration   Tom Rini
• [PATCH v3 7/7] arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext naming   Tom Rini
• [PATCH 1/2] board: phytec: imx8mm-phycore: Remove duplicate binman node   Tom Rini
• [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: Fix binman error   Tom Rini
• [RESEND PATCH v3] imx8mm_venice: switch to use binman to pack images   Tom Rini
• [PATCH] imx8mn_beacon: Fix booting hang and switch to binman   Tom Rini
• [PATCH V3 1/5] imx: imx8mq_evk: switch to binman   Tom Rini
• [PATCH V3 2/5] imx: imx8mq_phanbell: switch to binman   Tom Rini
• [PATCH V3 3/5] imx: pico-imx8mq: switch to use binman   Tom Rini
• [PATCH V3 4/5] imx: imx8mq use common imximage.cfg   Tom Rini
• [PATCH V3 5/5] doc: imx8mq_evk: update doc after using binman   Tom Rini
• [PATCH v2] imx8mm_beacon: Switch to binman for generating image   Tom Rini
• [PATCH v3 1/7] imx8mm-cl-iot-gate: fix imximage intermediate binary naming   Tom Rini
• [PATCH v3 2/7] arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: alphabetically re-order   Tom Rini
• [PATCH v3 3/7] arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: use common imx8mm-u-boot.dtsi   Tom Rini
• [PATCH v3 5/7] arm64: dts: imx8mm-u-boot.dtsi: alphabetically re-order properties   Tom Rini
• [PATCH v3 6/7] arm64: dts: imx8mm-u-boot.dtsi: explicitly add spl filename   Tom Rini
• [PATCH v4] binman: add support for creating dummy files for external blobs   Tom Rini
• [PATCH] Enable RaspberryPi arm64 to netboot a compressed kernel image   Georg Gast
• [PATCH 1/1] i2c: mvtwsi: Add compatible string for allwinner, sun4i-a10-i2c   Gajjar Akash
• [PATCH v2] console: usb: kbd: Limit poll frequency to improve performance   Peter Robinson
• Un-clean scripts/dtc causing buildman failure   Marcel Ziswiler
• [PATCH v3 4/7] arm64: dts: imx8mm: use common binman configuration   Marcel Ziswiler
• [PATCH v3 7/7] arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext naming   Marcel Ziswiler
• [EXT] Re: [PATCH v7 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Simon Glass
• efi bootmenu   Simon Glass
• [RFC PATCH v1 01/21] test: Add framework to test hush behavior.   Simon Glass
• [RFC PATCH v1 02/21] test: hush: Test hush if/else.   Simon Glass
• [RFC PATCH v1 03/21] test/py: hush_if_test: Remove the test file.   Simon Glass
• [RFC PATCH v1 04/21] test: hush: Test hush variable expansion.   Simon Glass
• [RFC PATCH v1 05/21] test: hush: Test hush commands list.   Simon Glass
• Un-clean scripts/dtc causing buildman failure   Simon Glass
• [PATCH] imx8mq: Generate a single bootable flash.bin again   Patrick Wildt
• [PATCH] imx8mq: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH v4 0/2] Add MNT Reform 2 board support   Patrick Wildt
• [PATCH v4 1/2] arm: dts: imx8mq: add MNT Reform 2   Patrick Wildt
• [PATCH v4 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Patrick Wildt
• [PATCH] imx8mq: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH] imx8mq: Generate a single bootable flash.bin again   Patrick Wildt
• [PATCH] imx8mq: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH v2] imx8mq: Generate a single bootable flash.bin again   Patrick Wildt
• [PATCH] imx8mq: Generate a single bootable flash.bin again   Patrick Wildt
• [PATCH v2] imx8mq: Generate a single bootable flash.bin again   Fabio Estevam
• [PATCH 2/2] udoo: neo: Do not print the Model information   Tommaso Merciai
• [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp   Tommaso Merciai
• [PATCH v2] imx8mq_evk: switch board to use binman for images   ZHIZHIKIN Andrey
• [PATCH] mtd: spi-nor-ids: Add support for W25Q512JV   Dhananjay Phadke
• [PATCH v2] imx8mq_evk: switch board to use binman for images   Tom Rini
• [PATCH] mtd: spi-nor-ids: Add support for W25Q512JV   Dhananjay Phadke
• Un-clean scripts/dtc causing buildman failure   Marcel Ziswiler
• [PATCH 1/6] udoo_spl: Initialize the eSDHC controller in SPL   Tom Rini
• [PATCH 2/6] ARM: dts: imx6qdl-udoo: Properly describe the SD card detect   Tom Rini
• [PATCH 3/6] udoo: Call gpio_request()   Tom Rini
• [PATCH 4/6] udoo: Adjust the SD card device numbering   Tom Rini
• [PATCH 5/6] udoo: Increase CONFIG_ENV_OFFSET   Tom Rini
• [PATCH 6/6] udoo: Select CMD_DM   Tom Rini
• [PATCH] nitrogen6x: add missing pinctrl to fix mmc   Tom Rini
• [PATCH] usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable   Tom Rini
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Heinrich Schuchardt
• [PATCH v1 1/3] rockchip: serial: restyle the serial_rockchip.c driver   Johan Jonker
• [PATCH v1 2/3] rockchip: serial: move driver alias to serial_rockchip.c   Johan Jonker
• [PATCH v1 3/3] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL   Johan Jonker
• [PATCH 0/6] armv8: fixes and cleanups   Andre Przywara
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH 2/6] armv8: Always unmask SErrors   Andre Przywara
• [PATCH 3/6] armv8: Force SP_ELx stack pointer usage   Andre Przywara
• [PATCH 4/6] arm: Clean up asm/io.h   Andre Przywara
• [PATCH 5/6] armv8: Simplify switch_el macro   Andre Przywara
• [PATCH 6/6] armv8: Fix and simplify branch_if_master/branch_if_slave   Andre Przywara
• [PATCH 1/1] riscv: revert Complete efi header for RV32/64   Heinrich Schuchardt
• [PATCH] .mailmap: add Atish Patra, Anup Patel   Heinrich Schuchardt
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Heinrich Schuchardt
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Heinrich Schuchardt
• [PATCH 0/6] armv8: fixes and cleanups   Michael Walle
• [PATCH] Revert "clk: Detect failure to set defaults"   Sean Anderson
• [PATCH] Revert "clk: Detect failure to set defaults"   Fabio Estevam
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH 4/6] arm: Clean up asm/io.h   Andre Przywara
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Heinrich Schuchardt
• SYS_MMC_ENV_DEV wrong depend?   Nuno Gonçalves
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH v8 05/12] doc: update UEFI document for usage of mkeficapsule   Heinrich Schuchardt
• [PATCH v8 04/12] tools: mkeficapsule: add man page   Heinrich Schuchardt
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Mark Kettenis
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Heinrich Schuchardt
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH 0/8] video: improve UEFI experience on DM_VIDEO   Andre Przywara
• [PATCH 1/8] video: Add cursor support for DM_VIDEO consoles   Andre Przywara
• [PATCH 2/8] video: vidconsole: Support wider bitmap fonts   Andre Przywara
• [PATCH 3/8] video: Kconfig: convert CONFIG_VIDEO_FONT_4X6 to Kconfig   Andre Przywara
• [PATCH 4/8] video: Add sun12x22 framebuffer front   Andre Przywara
• [PATCH 5/8] video: Add Terminus 16x32 font   Andre Przywara
• [PATCH 6/8] efi-selftest: Add international characters test   Andre Przywara
• [PATCH 7/8] efi_selftest: Add box drawing character selftest   Andre Przywara
• [PATCH 8/8] video: Convert UTF-8 input stream to the 437 code page   Andre Przywara
• [PULL u-boot] Please pull u-boot-amlogic-20220107   Tom Rini
• [PATCH 1/1] sunxi: Add option to prevent power-on when plug in   Andre Przywara
• [PATCH v2 00/38] binman: Add support for bintools and missing tools   Simon Glass
• [PATCH v2 01/38] Makefile: Fake external blobs by default with binman   Simon Glass
• [PATCH v2 02/38] binman: Tweak elf tests for a toolchain change   Simon Glass
• [PATCH v2 03/38] mkimage: Show the external-offset error   Simon Glass
• [PATCH v2 04/38] binman: Expand the external FIT test a little   Simon Glass
• [PATCH v2 05/38] patman: Allow running a tool and returning the full result   Simon Glass
• [PATCH v2 06/38] buildman: Move the download function to tools   Simon Glass
• [PATCH v2 07/38] patman: Tidy up the download function a little   Simon Glass
• [PATCH v2 08/38] patman: Add a function to find a tool on the path   Simon Glass
• [PATCH v2 09/38] binman: Write fake blobs to the output directory   Simon Glass
• [PATCH v2 10/38] binman: Drop the image name from the fake-blob message   Simon Glass
• [PATCH v2 11/38] binman: Allow faked blobs in blob-ext-list   Simon Glass
• [PATCH v2 12/38] binman: Correct path for fip_util   Simon Glass
• [PATCH v2 13/38] binman: Add installation instructions   Simon Glass
• [PATCH v2 14/38] binman: Add support for bintools   Simon Glass
• [PATCH v2 15/38] binman: Plumb in support for bintools   Simon Glass
• [PATCH v2 16/38] binman: Add tests for bintool   Simon Glass
• [PATCH v2 17/38] binman: Add a bintool implementation for cbfstool   Simon Glass
• [PATCH v2 18/38] binman: Add a bintool implementation for fiptool   Simon Glass
• [PATCH v2 19/38] binman: Add a bintool implementation for futility   Simon Glass
• [PATCH v2 20/38] binman: Add a bintool implementation for ifwitool   Simon Glass
• [PATCH v2 21/38] binman: Add a bintool implementation for mkimage   Simon Glass
• [PATCH v2 22/38] binman: Enable bintool tests including cmdline processing   Simon Glass
• [PATCH v2 23/38] binman: Convert to using the CBFS bintool   Simon Glass
• [PATCH v2 24/38] binman: Convert to using the FIP bintool   Simon Glass
• [PATCH v2 25/38] binman: Convert to using the futility bintool   Simon Glass
• [PATCH v2 26/38] binman: Convert to using the ifwitool bintool   Simon Glass
• [PATCH v2 27/38] binman: Convert to using the mkimage bintool   Simon Glass
• [PATCH v2 28/38] binman: Move compression into binman   Simon Glass
• [PATCH v2 29/38] binman: Tidy up pylint warnings in comp_util   Simon Glass
• [PATCH v2 30/38] binman: Add a bintool implementation for lz4   Simon Glass
• [PATCH v2 31/38] binman: Convert to using the lz4 bintool   Simon Glass
• [PATCH v2 32/38] binman: Add a bintool implementation for lzma_alone   Simon Glass
• [PATCH v2 33/38] binman: Convert to using the lzma_alone bintool   Simon Glass
• [PATCH v2 34/38] binman: Plumb in support for missing bintools   Simon Glass
• [PATCH v2 35/38] binman: Complete test coverage of comp_util   Simon Glass
• [PATCH v2 36/38] binman: Add a command to generate bintool docs   Simon Glass
• [PATCH v2 37/38] binman: Add documentation for bintools   Simon Glass
• [PATCH v2 38/38] RFC: Move Odroid-C2 to use binman to produce the image   Simon Glass
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Tnze Jdao
• [PATCH v6 1/4] mtd: spi-nor: macronix: add support for Macronix Octal   Pratyush Yadav
• [PATCH v6 3/4] mtd: spi-nor-core: Add support for Macronix Octal flash   Pratyush Yadav
• [PATCH] i2c: at91: add compatible with microchip,sam9x60-i2c   Heiko Schocher
• [PATCH 1/2] ARM: mvebu: x530: set MPP55 to gpio   Stefan Roese
• [PATCH 2/2] ARM: mvebu: x530: Add option for ECC   Stefan Roese
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Stefan Roese
• [PATCH v7 1/2] arm: dts: imx8mq: Add Kontron pitx-imx8m   Heiko Thiery
• [PATCH v7 2/2] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Heiko Thiery
• [PATCH u-boot-dm] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Stefan Roese
• In arm64 case, how is fdt address passed to x0 before switching to linux?   Chan Kim
• [PATCH u-boot-dm] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Stefan Roese
• [PATCH 2/2] ARM: mvebu: x530: Add option for ECC   Chris Packham
• [PATCH 8/8] video: Convert UTF-8 input stream to the 437 code page   Heinrich Schuchardt
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Pali Rohár
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Stefan Roese
• [PATCH 7/8] efi_selftest: Add box drawing character selftest   Heinrich Schuchardt
• [PATCH 6/8] efi-selftest: Add international characters test   Heinrich Schuchardt
• [PATCH 1/8] video: Add cursor support for DM_VIDEO consoles   Heinrich Schuchardt
• [RFC] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [PATCH u-boot-dm v2] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Marek Behún
• [PATCH 8/8] video: Convert UTF-8 input stream to the 437 code page   Andre Przywara
• [PATCH 7/8] efi_selftest: Add box drawing character selftest   Andre Przywara
• [PATCH v7 2/2] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Fabio Estevam
• [PATCH v7 1/2] arm: dts: imx8mq: Add Kontron pitx-imx8m   Fabio Estevam
• [PATCH 1/8] video: Add cursor support for DM_VIDEO consoles   Andre Przywara
• [PATCH v8 00/15] Add CAAM driver model support   Gaurav Jain
• [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH v8 02/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [PATCH v8 03/15] crypto/fsl: i.MX8M: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 04/15] mx6sabre: Remove unnecessary SPL configs   Gaurav Jain
• [PATCH v8 05/15] i.MX6: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 06/15] i.MX7: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 07/15] i.MX7ULP: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 08/15] i.MX8: Add crypto node in device tree   Gaurav Jain
• [PATCH v8 09/15] crypto/fsl: i.MX8: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 10/15] crypto/fsl: Improve hwrng performance in kernel   Gaurav Jain
• [PATCH v8 11/15] Layerscape: Add crypto node in device tree   Gaurav Jain
• [PATCH v8 12/15] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 13/15] PPC: Add crypto node in device tree   Gaurav Jain
• [PATCH v8 14/15] PPC: Enable Job ring driver model.   Gaurav Jain
• [PATCH v8 15/15] update CAAM MAINTAINER   Gaurav Jain
• [PATCH v8 12/15] Layerscape: Enable Job ring driver model.   Michael Walle
• [RFC PATCH] dts: automatically build necessary .dtb files   Rasmus Villemoes
• [RESEND PATCH v1] net: emaclite: fix underflow bug   Tianrui Wei
• [PATCH v8 10/15] crypto/fsl: Improve hwrng performance in kernel   ZHIZHIKIN Andrey
• SYS_MMC_ENV_DEV wrong depend?   Tom Rini
• [PATCHv3] net: uclass: Save generated ethernet MAC addresses to the environment   Tom Rini
• [PATCHv3] net: uclass: Save generated ethernet MAC addresses to the environment   Michal Simek
• [RFC] imx: imx8qm-rom7720: switch to binman   ZHIZHIKIN Andrey
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Alex G.
• Save bootargs from 1st stage bootloader like linux does   Dzmitry Sankouski
• [PATCH 1/2] board: sl28: disable random MAC address generation   Michael Walle
• [PATCH 2/2] board: sl28: use fit image generator   Michael Walle
• [PATCH v6 0/2] arm: imx8m: add support for Advantech RSB-3720   Ying-Chun Liu
• [PATCH v6 1/2] arm: dts: add imx8mp-rsb3720-a1 dts file   Ying-Chun Liu
• [PATCH v6 2/2] arm: imx8m: add support for Advantech RSB-3720   Ying-Chun Liu
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Tom Rini
• Save bootargs from 1st stage bootloader like linux does   Dzmitry Sankouski
• [RFC] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [RFC] imx: imx8qm-rom7720: switch to binman   Marcel Ziswiler
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Heinrich Schuchardt
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Tom Rini
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Heinrich Schuchardt
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Tom Rini
• [RFC] imx: imx8qm-rom7720: switch to binman   Adam Ford
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Heinrich Schuchardt
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Simon Glass
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Heinrich Schuchardt
• [PATCH v2] net: fsl_mdio: Fix busy flag polling register   Camelia Alexandra Groza (OSS)
• [PATCH 0/2] fix dumpimage for fit images   Stefan Eichenberger
• [PATCH 1/2] tools/fitimage: remove redundant format check   Stefan Eichenberger
• [PATCH 2/2] tools/fitimage: make sure dumpimage still works when "@" are detected   Stefan Eichenberger
• [PATCH] lib/rsa: avoid -Wdiscarded-qualifiers   Tom Rini
• [PATCH] .mailmap: add Atish Patra, Anup Patel   Tom Rini
• [ANN] U-Boot v2022.01 released   Tom Rini
• [PATCH v3 0/3] Apple M1 power management controller support   Mark Kettenis
• [PATCH v3 1/3] arm: dts: apple: Update Apple M1 device trees   Mark Kettenis
• [PATCH v3 2/3] arm: dts: apple: Add u-boot,dm-pre-reloc properties   Mark Kettenis
• [PATCH v3 3/3] power: domain: Add Apple pmgr driver   Mark Kettenis
• [PATCH 0/2] fw_env: two minor code cleanups   Rafał Miłecki
• [PATCH 1/2] fw_env: make flash_io() take buffer as an argument   Rafał Miłecki
• [PATCH 2/2] fw_env: simplify logic & code paths in the fw_env_open()   Rafał Miłecki
• [PATCH 0/4] Apple M1 watchdog timer   Mark Kettenis
• [RESEND PATCH v2] board: gateworks: venice: add imx8mn-gw7902 support   Tim Harvey
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Mark Kettenis
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Heinrich Schuchardt
• [PATCH 1/1] doc: Building on Alpine Linux   Heinrich Schuchardt
• [PATCH 1/1] sandbox: compatibility of os_get_filesize()   Heinrich Schuchardt
• [RESEND PATCH v3 01/12] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC   Jaehoon Chung
• [PATCH 2/2] ARM: mvebu: x530: Add option for ECC   Chris Packham
• [PATCH 2/2] ARM: mvebu: x530: Add option for ECC   Tom Rini
• [PATCH V8] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH v2] ARM: mvebu: x530: Add option for ECC   Chris Packham
• [EXT] Re: [PATCH v8 12/15] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [EXT] RE: [PATCH v8 10/15] crypto/fsl: Improve hwrng performance in kernel   Gaurav Jain
• [PATCH 2/2] ARM: mvebu: x530: Add option for ECC   Stefan Roese
• [PATCH 0/4] Apple M1 watchdog timer   Stefan Roese
• [PATCH] omap: timer: implement timer_get_boot_us   Christian Gmeiner
• imx: imx8mm: imx8mm-kontron-n801x-s: does not start work   Heiko Thiery
• [EXT] Re: [PATCH v8 12/15] Layerscape: Enable Job ring driver model.   Michael Walle
• [PATCH v2 00/20] J721S2: Add initial support   Aswath Govindraju
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Aswath Govindraju
• [PATCH v2 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance   Aswath Govindraju
• [PATCH v2 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems   Aswath Govindraju
• [PATCH v2 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple DDR subsystems   Aswath Govindraju
• [PATCH v2 05/20] arm: K3: Add basic support for J721S2 SoC definition   Aswath Govindraju
• [PATCH v2 06/20] drivers: dma: Add support for J721S2   Aswath Govindraju
• [PATCH v2 07/20] clk: clk-k3: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v2 08/20] power: domain: ti: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v2 09/20] ram: k3-ddrss: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v2 10/20] soc: ti: k3-socinfo: Add entry for J721S2 SoC   Aswath Govindraju
• [PATCH v2 11/20] board: ti: j721s2: Add board support for J721S2   Aswath Govindraju
• [PATCH v2 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC   Aswath Govindraju
• [PATCH v2 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2   Aswath Govindraju
• [PATCH v2 14/20] arm: dts: Add initial support for J721S2 SoC   Aswath Govindraju
• [PATCH v2 15/20] arm: dts: Add initial support for J721S2 System on Module   Aswath Govindraju
• [PATCH v2 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board   Aswath Govindraju
• [PATCH v2 17/20] arm: dts: k3-j721s2: Add r5 specific dt support   Aswath Govindraju
• [PATCH v2 18/20] arm: dts: k3-j721s2-ddr: Add DDR support   Aswath Govindraju
• [PATCH v2 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig   Aswath Govindraju
• [PATCH v2 20/20] configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig   Aswath Govindraju
• [PATCH 1/3] watchdog: Add a driver for the Apple watchdog   Stefan Roese
• [PATCH 2/3] arm: dts: apple: Add watchdog timer node   Stefan Roese
• [PATCH 3/3] arm: apple: Use watchdog timer for system reset   Stefan Roese
• [PATCH 1/2] ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12   Patrick DELAUNAY
• [PATCH 2/2] ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12   Patrick DELAUNAY
• [PATCH v4] net: uclass: Save generated ethernet MAC addresses to the environment   Michal Simek
• [PATCHv3] net: uclass: Save generated ethernet MAC addresses to the environment   Michal Simek
• [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp   Teresa Remmet
• [PATCH] mmc: dw_mmc: Fixes timeout issue for FIFO mode   hmz007
• [PATCH 1/6] cmd: exception: arm64: fix undefined, add faults   Andre Przywara
• [PATCH] mmc: dw_mmc: Fixes timeout issue for FIFO mode   Jaehoon Chung
• [PATCH v2] imx8mq_evk: configs: add/cleanup variables for distro boot   Andrey Zhizhikin
• [PATCH] mmc: dw_mmc: Fixes timeout issue for FIFO mode   gtXfined H.
• [PATCH 1/1] cmd: enable UEFI commands by default   Heinrich Schuchardt
• [PATCH v9 00/14] Add CAAM driver model support   Gaurav Jain
• [PATCH v9 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH v9 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [PATCH v9 03/14] crypto/fsl: i.MX8M: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 04/14] mx6sabre: Remove unnecessary SPL configs   Gaurav Jain
• [PATCH v9 05/14] i.MX6: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 06/14] i.MX7: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 07/14] i.MX7ULP: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 08/14] i.MX8: Add crypto node in device tree   Gaurav Jain
• [PATCH v9 09/14] crypto/fsl: i.MX8: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 10/14] Layerscape: Add crypto node in device tree   Gaurav Jain
• [PATCH v9 11/14] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 12/14] PPC: Add crypto node in device tree   Gaurav Jain
• [PATCH v9 13/14] PPC: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 14/14] update CAAM MAINTAINER   Gaurav Jain
• [EXT] Re: [PATCH v8 12/15] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [PATCH v9 11/14] Layerscape: Enable Job ring driver model.   Michael Walle
• [EXT] Re: [PATCH v9 11/14] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [EXT] Re: [PATCH v9 11/14] Layerscape: Enable Job ring driver model.   Michael Walle
• [PATCH] .mailmap: add Atish Patra, Anup Patel   Anup Patel
• [PATCH 0/7] sunxi: Fix U-Boot proper SPI operation   Andre Przywara
• [PATCH 1/7] sunxi: SPI: fix pinmuxing for Allwinner H6 SoCs   Andre Przywara
• [PATCH 2/7] sunxi: Kconfig: Fix up SPI configuration   Andre Przywara
• [PATCH 3/7] env: sunxi: Define location in SPI flash   Andre Przywara
• [PATCH 4/7] sunxi: use boot source for determining environment location   Andre Przywara
• [PATCH 5/7] env: sunxi: enable ENV_IS_IN_SPI_FLASH   Andre Przywara
• [PATCH 6/7] sunxi: boards: Enable SPI flash support in U-Boot proper   Andre Przywara
• [PATCH 7/7] sunxi: H6: Enable SPI0 in DT when no eMMC is used   Andre Przywara
• [PATCH] serial: zynq: Add missing xlnx,zynqmp-uart compatible   Michal Simek
• [EXT] Re: [PATCH v9 11/14] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [EXT] Re: [PATCH v9 11/14] Layerscape: Enable Job ring driver model.   Michael Walle
• [PATCH] arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI   Adam Ford
• [PATCH v2 0/4] rockchip: sdhci: Fix reinit and add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v2 1/4] mmc: sdhci: Add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v2 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Alper Nebi Yasak
• [PATCH v2 3/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399   Alper Nebi Yasak
• [PATCH v2 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Alper Nebi Yasak
• [PATCH] imx8mm_beacon/imx8mn_beacon: Update build instructions   Adam Ford
• [PATCH 1/2] fw_env: make flash_io() take buffer as an argument   Rafał Miłecki
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH] arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI   Adam Ford
• [PATCH] imx8mm_beacon/imx8mn_beacon: Update build instructions   ZHIZHIKIN Andrey
• [PATCH 1/1] disk: gpt: print all partitions   Heinrich Schuchardt
• [PATCH 1/1] stm32mp: fix board_get_alt_info_mmc()   Heinrich Schuchardt
• [PATCH 1/1] cmd: part: list all 128 GPT partitions   Heinrich Schuchardt
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Marek Vasut
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Michael Walle
• [PATCH] genboardscfg: limit to 240 jobs   Andre Przywara
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Pali Rohár
• [PATCH] board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivated   Patrick Delaunay
• [PATCH] genboardscfg: limit to 240 jobs   Heinrich Schuchardt
• [PATCH 0/2] get sdm845 boards u-boot usable as a secondary bootloader   Dzmitry Sankouski
• [PATCH 1/2] soc: sdm845: implement ABL info collecting, add bootcommand and usage doc   Dzmitry Sankouski
• [PATCH 2/2] board: starqltechn: get board usable - fix defconfig and strip config options   Dzmitry Sankouski
• [RESEND PATCH v3 01/12] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC   Sean Anderson
• [PATCH] mmc: dwmmc: return a proper error code when busy   John Keeping
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Tom Rini
• [RFC] nvme: Split out PCI support   Tom Rini
• CONFIG_SYS_SPL_ARGS_ADDR   Tom Rini
• [PATCH 2/2] board: starqltechn: get board usable - fix defconfig and strip config options   Tom Rini
• [PATCH 0/3] sandox: test: activate tests for the command LOG   Patrick Delaunay
• [PATCH 1/3] dm: fix up documentation for uclass_get_by_name_len   Patrick Delaunay
• [PATCH 2/3] dm: compare full name in uclass_get_by_name   Patrick Delaunay
• [PATCH 3/3] sandox: test: activate tests for the command LOG   Patrick Delaunay
• [PATCH 1/1] doc: Building on Alpine Linux   Sean Anderson
• [PATCH 0/1] configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin   Ying-Chun Liu
• [PATCH 1/1] configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin   Ying-Chun Liu
• [PATCH 1/1] configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin   Fabio Estevam
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH] misc: mark write buffer const   John Keeping
• [PATCH] cmd: bcb: fix bcb struct alignment issue   Gary Bisson
• [PATCH 1/2] board: samsung: fix menu entries for a{3,7}y17lte   Dzmitry Sankouski
• [PATCH 3/3] misc: atsha204a: fix i2c address readout from DTS   Adrian Fiergolski
• [PATCH 0/2] get sdm845 boards u-boot usable as a secondary bootloader   Dzmitry Sankouski
• [PATCH 1/2 v2] soc: sdm845: implement ABL info collecting, add bootcommand and usage doc   Dzmitry Sankouski
• [PATCH 2/2 v2] board: starqltechn: get board usable - fix defconfig and strip config options   Dzmitry Sankouski
• [PATCH v2 0/3] misc: atsha204a: bug fixes   Adrian Fiergolski
• [PATCH v2 1/3] misc: atsha204a: return timeout from wakeup function   Adrian Fiergolski
• [PATCH v2 2/3] misc: atsha204a: add delay after sending the message   Adrian Fiergolski
• [PATCH v2 3/3] misc: atsha204a: fix i2c address readout from DTS   Adrian Fiergolski
• [PATCH v2 1/2] board: samsung: fix menu entries for a{3,7}y17lte   Henrik Grimler
• [PATCH v2 2/2] doc: board: avoid ambiguous names for axy17lte   Henrik Grimler
• [PATCH 1/1] sandbox: compatibility of os_get_filesize()   Milan P. Stanić
• [PATCH 1/1] sandbox: compatibility of os_get_filesize()   Simon Glass
• [PATCH v3] net: fsl: Fix busy flag polling register   Markus Koch
• [PATCH v2 1/3] misc: atsha204a: return timeout from wakeup function   Marek Behún
• [PATCH v2 2/3] misc: atsha204a: add delay after sending the message   Marek Behún
• [PATCH v2 3/3] misc: atsha204a: fix i2c address readout from DTS   Marek Behún
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Marek Vasut
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Tom Rini
• imx: imx8mm: imx8mm-kontron-n801x-s: does not start work   Adam Ford
• [PATCH] mkimage: fix segfault on MacOS arm64   Jessica Clarke
• [RFC PATCH v3 1/5] imx8m: drop env_get_location for imx8mn and imx8mp   Tommaso Merciai
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Alex G.
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Pali Rohár
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Tom Rini
• [PATCH v7 00/19] Add Rikomagic MK808 board   Johan Jonker
• [PATCH v7 01/19] rockchip: rk3066-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v7 02/19] rockchip: rk3066: add grf header file   Johan Jonker
• [PATCH v7 03/19] rockchip: include: add GRF_GPIO3B_IOMUX to grf_rk3066.h   Johan Jonker
• [PATCH v7 04/19] rockchip: rk3066: add clock driver for rk3066 soc   Johan Jonker
• [PATCH v7 05/19] rockchip: clk: add SCLK_TIMER[0..2] to clk_rk3066.c   Johan Jonker
• [PATCH v7 06/19] rockchip: clk: add SCLK_UART[0..3] to clk_rk3066.c   Johan Jonker
• [PATCH v7 07/19] rockchip: rk3066: fix assigned-clocks rk3066_clk_set_rate   Johan Jonker
• [PATCH v7 08/19] rockchip: rk3066: add rk3066 pinctrl driver   Johan Jonker
• [PATCH v7 09/19] rockchip: rk3066: add sdram driver   Johan Jonker
• [PATCH v7 10/19] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v7 11/19] arm: dts: rockchip: add rk3066a.dtsi   Johan Jonker
• [PATCH v7 12/19] arm: dts: rockchip: add rk3066a-mk808.dts   Johan Jonker
• [PATCH v7 13/19] rockchip: rk3066: add include   Johan Jonker
• [PATCH v7 14/19] rockchip: rk3066: add rk3066_common.h include   Johan Jonker
• [PATCH v7 15/19] rockchip: rk3066: add core support   Johan Jonker
• [PATCH v7 16/19] rockchip: rk3066: add Rikomagic MK808 board   Johan Jonker
• [PATCH v7 17/19] rockchip: rk3066: add mk808_defconfig   Johan Jonker
• [PATCH v7 18/19] rockchip: tools: add rk3066 support to rkcommon.c   Johan Jonker
• [PATCH v7 19/19] doc: rockchip: add rk3066 Rikomagic MK808   Johan Jonker
• [PATCH] tools: Do not build kwbimage if CONFIG_TOOLS_LIBCRYPTO=n   Marek Vasut
• [PATCH] mmc: dwmmc: return a proper error code when busy   Jaehoon Chung
• [PATCH] mmc: dw_mmc: Fixes timeout issue for FIFO mode   Jaehoon Chung
• [PATCH v2 1/2] board: samsung: fix menu entries for a{3,7}y17lte   Jaehoon Chung
• [PATCH v2 2/2] doc: board: avoid ambiguous names for axy17lte   Jaehoon Chung
• [RESEND PATCH v3 01/12] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC   Jaehoon Chung
• IMX8MM SD UHS support   Adam Ford
• [PATCH] mmc: dwmmc: return a proper error code when busy   Jaehoon Chung
• [PATCH 1/4] ci: azure: Update to use stages   Tom Rini
• [PATCH 2/4] CI, Dockerfile: Update to latest "focal" tag   Tom Rini
• [PATCH 3/4] binman: Have faked binaries live in the output directory.   Tom Rini
• [PATCH 4/4] .readthedocs.yml: Set our requirements file   Tom Rini
• [PATCH 2/4] CI, Dockerfile: Update to latest "focal" tag   Fabio Estevam
• [PATCH 2/4] CI, Dockerfile: Update to latest "focal" tag   Tom Rini
• [PATCH v2 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   赵仪峰
• [PATCH 4/4] .readthedocs.yml: Set our requirements file   Heinrich Schuchardt
• [PATCH 1/1] .readthedocs.yml: update the requirements   Heinrich Schuchardt
• [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [RESEND PATCH v3 01/12] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC   Minkyu Kang
• imx: imx8mm: imx8mm-kontron-n801x-s: does not start work   Heiko Thiery
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Stefan Roese
• How to use add-symbol-file in gdb after the program jumped to linux? (both when PC is physical and virtual)   Chan Kim
• imx: imx8mm: imx8mm-kontron-n801x-s: does not start work   Frieder Schrempf
• [PATCH] cmd: bcb: fix bcb struct alignment issue   Mattijs Korpershoek
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Michael Walle
• How to use add-symbol-file in gdb after the program jumped to linux? (both when PC is physical and virtual)   Chan Kim
• [PATCH] configs: amlogic: Disable CONFIG_NET_RANDOM_ETHADDR for android   Mattijs Korpershoek
• net: smsc95xx: ARP Retry count exceeded problem   Lars Michael
• [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig   Heiko Thiery
• [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi   Heiko Thiery
• [PATCH] configs: amlogic: Disable CONFIG_NET_RANDOM_ETHADDR for android   Neil Armstrong
• [PATCH] configs: meson64_android: define raw parts for bootloader   Neil Armstrong
• [RFC] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [PATCH 0/3] sandox: test: activate tests for the command LOG   Marcel Ziswiler
• [PATCH] imx8mm_beacon/imx8mn_beacon: Update build instructions   Marcel Ziswiler
• [PATCH 0/3] sandox: test: activate tests for the command LOG   Marcel Ziswiler
• imx8mq hangs when reset board with button   Belisko Marek
• [PATCH v4] net: uclass: Save generated ethernet MAC addresses to the environment   Michal Simek
• [PATCH] serial: zynq: Add missing xlnx,zynqmp-uart compatible   Michal Simek
• [PATCH v3] phy: zynqmp: Add serdes/psgtr driver   Michal Simek
• [PATCH 1/9] doc: add include/dm/uclass.h to the HTML documentation   Patrick Delaunay
• [PATCH 2/9] doc: add include/dm/root.h to the HTML documentation   Patrick Delaunay
• [PATCH 3/9] doc: add include/dm/lists.h to the HTML documentation   Patrick Delaunay
• [PATCH 4/9] doc: add include/dm/platdata.h to the HTML documentation   Patrick Delaunay
• [PATCH 5/9] doc: add include/dm/device.h to the HTML documentation   Patrick Delaunay
• [PATCH 6/9] doc: add include/dm/devres.h to the HTML documentation   Patrick Delaunay
• [PATCH 7/9] doc: add include/dm/read.h to the HTML documentation   Patrick Delaunay
• [PATCH 8/9] doc: add include/dm/of*.h to the HTML documentation   Patrick Delaunay
• [PATCH 8/9] doc: add include/dm/of*.h to the HTML documentation   Patrick Delaunay
• [PATCH 9/9] doc: add include/dm/fdtaddr.h to the HTML documentation   Patrick Delaunay
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Pali Rohár
• [PATCH v3] net: fsl: Fix busy flag polling register   Camelia Alexandra Groza (OSS)
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Stefan Roese
• [PATCH] spi: Add spi_get_bus_and_cs() new use_dt param   Patrice Chotard
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Stefan Roese
• [PATCH] imx8mm_beacon/imx8mn_beacon: Update build instructions   ZHIZHIKIN Andrey
• [PATCH] mmc: dwmmc: return a proper error code when busy   John Keeping
• [PATCH] mmc: dw_mmc: Fixes timeout issue for FIFO mode   Jaehoon Chung
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Pali Rohár
• [PATCH V2 0/2] fw_env: two minor code cleanups   Rafał Miłecki
• [PATCH V2 1/2] fw_env: make flash_io() take buffer as an argument   Rafał Miłecki
• [PATCH V2 2/2] fw_env: simplify logic & code paths in the fw_env_open()   Rafał Miłecki
• [PATCH V3 0/2] fw_env: two minor code cleanups   Rafał Miłecki
• [PATCH V3 1/2] fw_env: make flash_io() take buffer as an argument   Rafał Miłecki
• [PATCH V3 2/2] fw_env: simplify logic & code paths in the fw_env_open()   Rafał Miłecki
• [PATCH] imx8mm_beacon/imx8mn_beacon: Update build instructions   Adam Ford
• [PATCH] mmc: dw_mmc: Fixes timeout issue for FIFO mode   gtXfined H.
• [PATCH 1/2] imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig   Frieder Schrempf
• [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi   Frieder Schrempf
• [PATCH v10 00/14] Add CAAM driver model support   Gaurav Jain
• [PATCH v10 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH v10 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [PATCH v10 03/14] crypto/fsl: i.MX8M: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 04/14] mx6sabre: Remove unnecessary SPL configs   Gaurav Jain
• [PATCH v10 05/14] i.MX6: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 06/14] i.MX7: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 07/14] i.MX7ULP: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 08/14] i.MX8: Add crypto node in device tree   Gaurav Jain
• [PATCH v10 09/14] crypto/fsl: i.MX8: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 10/14] Layerscape: Add crypto node in device tree   Gaurav Jain
• [PATCH v10 11/14] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 12/14] PPC: Add crypto node in device tree   Gaurav Jain
• [PATCH v10 13/14] PPC: Enable Job ring driver model.   Gaurav Jain
• [PATCH v10 14/14] update CAAM MAINTAINER   Gaurav Jain
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Stefan Roese
• [PATCH 0/2] mmc: fsl_esdhc_imx: Auto-detect higher speeds   Adam Ford
• [PATCH 1/2] mmc: fsl_esdhc_imx: Fix fsl_esdhc_wait_dat0   Adam Ford
• [PATCH 2/2] mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps   Adam Ford
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Pali Rohár
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Stefan Roese
• [PATCH u-boot-marvell 00/16] tools: kwbimage: Load address fixes   Pali Rohár
• [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [PATCH v10 11/14] Layerscape: Enable Job ring driver model.   Michael Walle
• [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behún
• [PATCH] rockchip: ram: sdram_rk3x88: replace comma by semicolon   Johan Jonker
• [PATCH u-boot-marvell v2 00/20] tools: kwbimage: Load address fixes   Pali Rohár
• [PATCH u-boot-marvell v2 01/20] tools: kwbimage: Mark all local functions as static   Pali Rohár
• [PATCH u-boot-marvell v2 02/20] tools: kwbimage: Deduplicate v1 regtype header finishing   Pali Rohár
• [PATCH u-boot-marvell v2 03/20] tools: kwbimage: Fix generating image with multiple DATA_DELAY commands   Pali Rohár
• [PATCH u-boot-marvell v2 04/20] tools: kwbimage: Preserve order of BINARY, DATA and DATA_DELAY commands   Pali Rohár
• [PATCH u-boot-marvell v2 05/20] arm: mvebu: Generate kwbimage.cfg with $(call cmd, ...)   Pali Rohár
• [PATCH u-boot-marvell v2 06/20] tools: kwbimage: Add support for specifying CPU core   Pali Rohár
• [PATCH u-boot-marvell v2 07/20] tools: kwbimage: Add support for specifying LOAD_ADDRESS for BINARY command   Pali Rohár
• [PATCH u-boot-marvell v2 08/20] tools: kwbimage: Check the return value of image_headersz_v1()   Pali Rohár
• [PATCH u-boot-marvell v2 09/20] tools: kwbimage: Check for maximal kwbimage header size   Pali Rohár
• [PATCH u-boot-marvell v2 10/20] arm: mvebu: Set CPU for U-Boot SPL binary in kwbimage   Pali Rohár
• [PATCH u-boot-marvell v2 11/20] arm: mvebu: Correctly set LOAD_ADDRESS for U-Boot SPL binary in kwbimage   Pali Rohár
• [PATCH u-boot-marvell v2 12/20] tools: kwbimage: Enforce 128-bit boundary alignment only for Sheeva CPU   Pali Rohár
• [PATCH u-boot-marvell v2 13/20] arm: mvebu: Enable BootROM output on A38x   Pali Rohár
• [PATCH u-boot-marvell v2 14/20] tools: kwbimage: Add missing check for maximal value for DATA_DELAY   Pali Rohár
• [PATCH u-boot-marvell v2 15/20] tools: kwbimage: Show binary image offset in mkimage -l, in addition to size   Pali Rohár
• [PATCH u-boot-marvell v2 16/20] tools: kwbimage: Dump kwbimage config file on '-p -1' option   Pali Rohár
• [PATCH u-boot-marvell v2 17/20] tools: kwbimage: Do not cast const pointers to non-const pointers   Pali Rohár
• [PATCH u-boot-marvell v2 18/20] tools: kwbimage/kwboot: Check ext field for non-zero value   Pali Rohár
• [PATCH u-boot-marvell v2 19/20] tools: kwbimage: Extract main data image without -p arg for dumpimage   Pali Rohár
• [PATCH u-boot-marvell v2 20/20] tools: kwbimage: Fix mkimage/dumpimage -l argument   Pali Rohár
• [PATCH] arm: mvebu: db-88f6720: Fix CONFIG_SPL_TEXT_BASE and remove wrong memory layout   Pali Rohár
• [PATCH] arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation   Pali Rohár
• [PATCH v8] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Heiko Thiery
• [PATCH 1/3] watchdog: Add a driver for the Apple watchdog   Mark Kettenis
• [PATCH v2 0/3] Apple M1 watchdog timer   Mark Kettenis
• [PATCH v2 1/3] watchdog: Add a driver for the Apple watchdog   Mark Kettenis
• [PATCH v2 2/3] arm: dts: apple: Add watchdog timer node   Mark Kettenis
• [PATCH v2 3/3] arm: apple: Use watchdog timer for system reset   Mark Kettenis
• [PATCH v3] pci: Work around PCIe link training failures   Tom Rini
• [PATCH 3/4] binman: Have faked binaries live in the output directory.   Simon Glass
• [PATCH] misc: mark write buffer const   Simon Glass
• [PATCH 3/4] binman: Have faked binaries live in the output directory.   Tom Rini
• [PATCH v2 2/4] rockchip: tpl: change call condition rockchip_stimer_init()   Simon Glass
• [PATCH] spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig   Simon Glass
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Simon Glass
• [PATCH v3 2/6] rockchip: move CONFIG_SYS_ARCH_TIMER to Kconfig   Simon Glass
• [PATCH v3 4/6] rockchip: tpl: change call condition rockchip_stimer_init()   Simon Glass
• [PATCH v3 3/6] rockchip: spl: change call condition rockchip_stimer_init()   Simon Glass
• [PATCH v3 5/6] rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition   Simon Glass
• [PATCH v3 6/6] rockchip: tpl: use IS_ENABLED for timer_init() call condition   Simon Glass
• [RFC PATCH v1 06/21] test: hush: Test hush loops.   Simon Glass
• [RFC PATCH v1 09/21] cli: Add choice for hush parser.   Simon Glass
• [RFC PATCH v1 10/21] cli: Add HUSH_2021_PARSER to hush parser choice .   Simon Glass
• [RFC PATCH v1 08/21] cli: Port Busybox 2021 hush to U-Boot.   Simon Glass
• [RFC PATCH v1 11/21] cli: Enables using hush 2021 parser as command line parser.   Simon Glass
• [RFC PATCH v1 12/21] cli: hush_2021: Enable variables expansion for hush 2021.   Simon Glass
• [RFC PATCH v1 14/21] cli: Modify run_command() to add hush 2021 as parser.   Simon Glass
• [RFC PATCH v1 13/21] cli: hush_2021: Add functions to be called from run_command().   Simon Glass
• [RFC PATCH v1 15/21] test: hush: Fix instructions list tests for hush 2021.   Simon Glass
• [RFC PATCH v1 16/21] test: hush: Fix variable expansion tests for hush 2021.   Simon Glass
• [RFC PATCH v1 07/21] cli: Add Busybox upstream hush.c file.   Simon Glass
• [RFC PATCH v1 17/21] cli: hush_2021: Enable using \< and \> as string compare operators.   Simon Glass
• [RFC PATCH v1 18/21] cli: hush_2021: Enable if keyword.   Simon Glass
• [RFC PATCH v1 19/21] test: hush: Fix if tests for hush 2021.   Simon Glass
• [RFC PATCH v1 21/21] test: hush: Fix loop tests for hush 2021.   Simon Glass
• [RFC PATCH v1 20/21] cli: hush_2021: Enable loops.   Simon Glass
• [PATCH v10 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Simon Glass
• [PATCH 1/1] .readthedocs.yml: update the requirements   Simon Glass
• [PATCH] rockchip: ram: sdram_rk3x88: replace comma by semicolon   Simon Glass
• [PATCH] Makefile: imx: Do not call arch/arm/mach-imx flash.bin generation if BINMAN enabled   Simon Glass
• [PATCH v8 02/12] tools: build mkeficapsule with tools-only_defconfig   Simon Glass
• [PATCH v8 12/12] (RFC) efi_loader, dts: add public keys for capsules to device tree   Simon Glass
• [PATCH v3 1/2] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Simon Glass
• [PATCH v3 2/2] rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure   Simon Glass
• [PATCH v1 1/3] rockchip: serial: restyle the serial_rockchip.c driver   Simon Glass
• [PATCH v1 3/3] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL   Simon Glass
• [PATCH v1 2/3] rockchip: serial: move driver alias to serial_rockchip.c   Simon Glass
• [PATCH 2/8] video: vidconsole: Support wider bitmap fonts   Simon Glass
• [PATCH 3/8] video: Kconfig: convert CONFIG_VIDEO_FONT_4X6 to Kconfig   Simon Glass
• [PATCH 4/8] video: Add sun12x22 framebuffer front   Simon Glass
• [PATCH 5/8] video: Add Terminus 16x32 font   Simon Glass
• [PATCH u-boot-dm v2] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Simon Glass
• [PATCH] genboardscfg: limit to 240 jobs   Simon Glass
• [PATCH v2 1/2] binman: Renumber the fake blob dts   Simon Glass
• [PATCH v2 2/2] binman: Write fake blobs to the output directory   Simon Glass
• [PATCH 3/4] binman: Have faked binaries live in the output directory.   Simon Glass
• [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export   Fabio Estevam
• [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export   Fabio Estevam
• [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export   Fabio Estevam
• [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export   Patrick Wildt
• [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export   Patrick Wildt
• [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export   Patrick Wildt
• [PATCH 0/4] arm64: imx8mq/imx8mm: cleanup binman configuration   Patrick Wildt
• [PATCH 1/4] arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties   Patrick Wildt
• [PATCH] patman: expand user home when looking for the alias file   Simon Glass
• [PATCH 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename   Patrick Wildt
• [PATCH 3/4] arm64: dts: imx8mm-u-boot.dtsi: fix typo in ddr blob name   Patrick Wildt
• [PATCH] patman: Support absolute and ~user-relative alias files   Simon Glass
• [PATCH 4/4] arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming   Patrick Wildt
• [PATCH 02/31] kconfig: Add support for conditional values   Simon Glass
• [PATCH v4 0/2] Add MNT Reform 2 board support   Patrick Wildt
• [PATCH v4 1/2] arm: dts: imx8mq: add MNT Reform 2   Fabio Estevam
• [PATCH v4 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Fabio Estevam
• [PATCH 02/31] kconfig: Add support for conditional values   Tom Rini
• [PATCH v4 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Tom Rini
• [PATCH v4 0/2] Add MNT Reform 2 board support   Tom Rini
• [PATCH v4 0/2] Add MNT Reform 2 board support   Patrick Wildt
• [PATCH 1/4] ci: azure: Update to use stages   Tom Rini
• [PATCH 02/31] kconfig: Add support for conditional values   Simon Glass
• [PATCH u-boot-dm v2] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• [PATCH] arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation   Marek Behún
• [PATCH] arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation   Pali Rohár
• [PATCH v3] pci: Work around PCIe link training failures   Maciej W. Rozycki
• [PATCH 02/31] kconfig: Add support for conditional values   Tom Rini
• [PATCH] mmc: dwmmc: return a proper error code when busy   Jaehoon Chung
• [PATCH u-boot-next 1/4] vexpress64: Remove unused macro XR3PCI_ECAM_OFFSET   Tom Rini
• [PATCH u-boot-next 2/4] pci: pcie-brcmstb: Use PCIE_ECAM_OFFSET() macro   Tom Rini
• [PATCH u-boot-next 3/4] pci: pcie_iproc: Use PCIE_ECAM_OFFSET() macro   Tom Rini
• [PATCH u-boot-next 4/4] pci: pci_octeontx: Use PCIE_ECAM_OFFSET() macro   Tom Rini
• [PATCH] pci: Fix register for determining type of IO base address   Tom Rini
• [PATCH] pci: Disable I/O forwarding during autoconfiguration if unsupported   Tom Rini
• [PATCH] pci: When disabling pref MEM set all base bits   Tom Rini
• [PATCH u-boot-next 01/12] pci: Add standard PCI Config Address macros   Tom Rini
• [PATCH u-boot-next 02/12] pci: gt64120: Use PCI_CONF1_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 03/12] pci: mpc85xx: Use PCI_CONF1_EXT_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 04/12] pci: msc01: Use PCI_CONF1_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 05/12] pci: mvebu: Use PCI_CONF1_EXT_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 06/12] pci: tegra: Use PCI_CONF1_EXT_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 07/12] pci: fsl: Use PCI_CONF1_EXT_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 08/12] pci: mediatek: Use PCI_CONF1_EXT_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 09/12] pci: sh7780: Use PCI_CONF1_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 10/12] x86: pci: Use PCI_CONF1_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 11/12] m68k: mcf5445x: pci: Use PCI_CONF1_ADDRESS() macro   Tom Rini
• [PATCH u-boot-next 12/12] pci: sh7751: Fix access to config space via PCI_CONF1_ADDRESS() macro   Tom Rini
• [PATCH v2 00/12] bloblist: Enhancements for standard passage   Simon Glass
• [PATCH v2 01/12] stddef: Avoid warning with clang with offsetof()   Simon Glass
• [PATCH v2 02/12] fdt: Drop SPL_BUILD macro   Simon Glass
• [PATCH v2 03/12] bloblist: Put the magic number first   Simon Glass
• [PATCH v2 04/12] bloblist: Rename the SPL tag   Simon Glass
• [PATCH v2 05/12] bloblist: Drop unused tags   Simon Glass
• [PATCH v2 06/12] bloblist: Use explicit numbering for the tags   Simon Glass
• [PATCH v2 07/12] bloblist: Use LOG_CATEGORY to simply logging   Simon Glass
• [PATCH v2 08/12] bloblist: Use 'phase' consistently for bloblists   Simon Glass
• [PATCH v2 09/12] bloblist: Refactor Kconfig to support alloc or fixed   Simon Glass
• [PATCH v2 10/12] bloblist: Add functions to obtain base address and size   Simon Glass
• [PATCH v2 11/12] bloblist: doc: Bring in the API documentation   Simon Glass
• [PATCH v2 12/12] bloblist: Relicense to allow BSD-3-Clause   Simon Glass
• [PATCH v2 1/2] board: samsung: fix menu entries for a{3,7}y17lte   Minkyu Kang
• [PATCH v2 2/2] doc: board: avoid ambiguous names for axy17lte   Minkyu Kang
• [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Stefan Roese
• [PATCH u-boot-marvell v2 01/20] tools: kwbimage: Mark all local functions as static   Stefan Roese
• [PATCH u-boot-marvell v2 02/20] tools: kwbimage: Deduplicate v1 regtype header finishing   Stefan Roese
• [PATCH u-boot-marvell v2 03/20] tools: kwbimage: Fix generating image with multiple DATA_DELAY commands   Stefan Roese
• [PATCH u-boot-marvell v2 04/20] tools: kwbimage: Preserve order of BINARY, DATA and DATA_DELAY commands   Stefan Roese
• [PATCH u-boot-marvell v2 05/20] arm: mvebu: Generate kwbimage.cfg with $(call cmd, ...)   Stefan Roese
• [PATCH u-boot-marvell v2 06/20] tools: kwbimage: Add support for specifying CPU core   Stefan Roese
• [PATCH u-boot-marvell v2 07/20] tools: kwbimage: Add support for specifying LOAD_ADDRESS for BINARY command   Stefan Roese
• [PATCH u-boot-marvell v2 08/20] tools: kwbimage: Check the return value of image_headersz_v1()   Stefan Roese
• [PATCH u-boot-marvell v2 09/20] tools: kwbimage: Check for maximal kwbimage header size   Stefan Roese
• [PATCH u-boot-marvell v2 10/20] arm: mvebu: Set CPU for U-Boot SPL binary in kwbimage   Stefan Roese
• [PATCH u-boot-marvell v2 11/20] arm: mvebu: Correctly set LOAD_ADDRESS for U-Boot SPL binary in kwbimage   Stefan Roese
• [PATCH u-boot-marvell v2 12/20] tools: kwbimage: Enforce 128-bit boundary alignment only for Sheeva CPU   Stefan Roese
• [PATCH 1/1] riscv: revert Complete efi header for RV32/64   Leo Liang
• [PATCH u-boot-marvell v2 13/20] arm: mvebu: Enable BootROM output on A38x   Stefan Roese
• [PATCH u-boot-marvell v2 14/20] tools: kwbimage: Add missing check for maximal value for DATA_DELAY   Stefan Roese
• [PATCH u-boot-marvell v2 15/20] tools: kwbimage: Show binary image offset in mkimage -l, in addition to size   Stefan Roese
• [PATCH u-boot-marvell v2 16/20] tools: kwbimage: Dump kwbimage config file on '-p -1' option   Stefan Roese
• [PATCH 4/6] arm: Clean up asm/io.h   Leo Liang
• [PATCH u-boot-marvell v2 17/20] tools: kwbimage: Do not cast const pointers to non-const pointers   Stefan Roese
• [PATCH u-boot-marvell v2 18/20] tools: kwbimage/kwboot: Check ext field for non-zero value   Stefan Roese
• [PATCH u-boot-marvell v2 19/20] tools: kwbimage: Extract main data image without -p arg for dumpimage   Stefan Roese
• [PATCH u-boot-marvell v2 20/20] tools: kwbimage: Fix mkimage/dumpimage -l argument   Stefan Roese
• [PATCH] arm: mvebu: db-88f6720: Fix CONFIG_SPL_TEXT_BASE and remove wrong memory layout   Stefan Roese
• [PATCH] arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation   Stefan Roese
• [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Stefan Roese
• [PATCH V3] sf: Querying write-protect status before operating the flash   Jan Kiszka
• [PATCH] net: fastboot: make UDP port net: configurable   Christian Gmeiner
• [PATCH 02/31] kconfig: Add support for conditional values   Rasmus Villemoes
• [PATCH 04/31] stddef: Avoid warning with clang with offsetof()   Rasmus Villemoes
• [PATCH v2 0/3] Apple M1 watchdog timer   Stefan Roese
• Please pull u-boot-marvell/master (watchdog related)   Stefan Roese
• [RFC 0/6] Exynos5: Update devicetree files from linux kernel   Jaehoon Chung
• [RFC 1/6] ARM: exynos5: sync devicetree files from linux kernel   Jaehoon Chung
• [RFC 2/6] board: exynos5-dt-type: add hardkernel,odroid-xu3 compatible   Jaehoon Chung
• [RFC 3/6] mmc: exynos_dw_mmc: add exynos5420 compatible   Jaehoon Chung
• [RFC 4/6] mmc: exynos_dw_mmc: remove the error message and not return   Jaehoon Chung
• [RFC 5/6] i2c: exynos_hs_i2c: add samsung,exynos5250-hsi2c compatible   Jaehoon Chung
• [RFC 6/6] power: s2pms11: change the subnode name to regulators   Jaehoon Chung
• How to use add-symbol-file in gdb after the program jumped to linux? (both when PC is physical and virtual)   Chan Kim
• [PATCH] i2c: at91: add compatible with microchip,sam9x60-i2c   Eugen.Hristev at microchip.com
• [PATCH] board: sama7g5ek: set blue led on at boot time   Eugen.Hristev at microchip.com
• [PATCH] arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation   Pali Rohár
• [PATCH 0/4] arm64: imx8mq/imx8mm: cleanup binman configuration   Frieder Schrempf
• [PATCH 3/4] arm64: dts: imx8mm-u-boot.dtsi: fix typo in ddr blob name   Michael Walle
• [PATCH] net: fastboot: make UDP port net: configurable   Heiko Schocher
• [PATCH] patman: Support absolute and ~user-relative alias files   Otavio Salvador
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Pali Rohár
• [PATCH 0/3] mkimage: allow to specify signing algorithm   Jan Kiszka
• [PATCH 02/31] kconfig: Add support for conditional values   Tom Rini
• [PATCH] LynxOS is no longer supported   Tom Rini
• [PATCH v4] timer: Add a migration message   Tom Rini
• [PATCH] Makefile: Add more files to clean list   Tom Rini
• [PATCH 1/4] ci: azure: Update to use stages   Tom Rini
• [PATCH 2/4] CI, Dockerfile: Update to latest "focal" tag   Tom Rini
• [PATCH v2 1/2] binman: Renumber the fake blob dts   Tom Rini
• [PATCH v2 2/2] binman: Write fake blobs to the output directory   Tom Rini
• [PATCH v3] pci: Work around PCIe link training failures   Stefan Roese
• [PATCH 04/31] stddef: Avoid warning with clang with offsetof()   Tom Rini
• [PATCH 3/4] arm64: dts: imx8mm-u-boot.dtsi: fix typo in ddr blob name   Patrick Wildt
• [PATCH 1/3] arm: kirkwood: iConnect : Add PCIe related configs   Stefan Roese
• [PATCH 2/3] arm: kirkwood: iConnect : Add PCIe late init   Stefan Roese
• [PATCH 3/3] arm: kirkwood: iConnect : Update board maintainer   Stefan Roese
• [PATCH] pci: pci_mvebu: Add support for Kirkwood PCIe controllers   Pali Rohár
• [PATCH] squashfs: show an error message if the inode_table can't be, allocated   Lars Weber
• [PATCH 3/4] arm64: dts: imx8mm-u-boot.dtsi: fix typo in ddr blob name   Michael Walle
• [PATCH v2 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file   Stefan Roese
• [PATCH v2 1/8] arm: kirkwood: Pogoplug-V4 : Add DTS files   Stefan Roese
• [PATCH v2 2/8] arm: kirkwood: Pogoplug V4 : Add board defconfig file   Stefan Roese
• [PATCH v2 3/8] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Stefan Roese
• [PATCH v2 5/8] arm: kirkwood: Pogoplug-V4 : Add board kwbimage file   Stefan Roese
• [PATCH v2 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file   Tom Rini
• [PATCH v2 6/8] arm: kirkwood: Pogoplug-V4 : Add board Make file   Stefan Roese
• [PATCH 04/31] stddef: Avoid warning with clang with offsetof()   Simon Glass
• [PATCH v2 7/8] arm: kirkwood: Pogoplug-V4 : Add board implementation   Stefan Roese
• [PATCH 0/3] mkimage: allow to specify signing algorithm   Simon Glass
• [PATCH 3/4] arm64: dts: imx8mm-u-boot.dtsi: fix typo in ddr blob name   Fabio Estevam
• [PATCH v2 8/8] arm: kirkwood: Pogoplug-V4 : Add board maintainer   Stefan Roese
• [PATCH u-boot-dm v2] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Simon Glass
• [PATCH 0/3] Add PCIe support for Iomega iConnect board   Pali Rohár
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Simon Glass
• [PATCH] dm: core: Switch order of pinctrl and power domain calls   Simon Glass
• [PATCH 04/31] stddef: Avoid warning with clang with offsetof()   Tom Rini
• [PATCH] configs: fsl: add missing FMAN/QE_FW_ADDR defines   Camelia Groza
• [PATCH v3 01/12] stddef: Avoid warning with clang with offsetof()   Simon Glass
• [PATCH 04/31] stddef: Avoid warning with clang with offsetof()   Simon Glass
• [PATCH 02/31] kconfig: Add support for conditional values   Simon Glass
• [PATCH v2 14/20] arm: dts: Add initial support for J721S2 SoC   Tom Rini
• [PATCH v2 17/20] arm: dts: k3-j721s2: Add r5 specific dt support   Tom Rini
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Tom Rini
• [PATCH v2 05/20] arm: K3: Add basic support for J721S2 SoC definition   Tom Rini
• [PATCH v2 09/20] ram: k3-ddrss: Add support for J721S2 SoC   Tom Rini
• [PATCH v2 14/20] arm: dts: Add initial support for J721S2 SoC   Aswath Govindraju
• [PATCH v2 11/20] board: ti: j721s2: Add board support for J721S2   Tom Rini
• [PATCH v2 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC   Tom Rini
• [PATCH 3/4] arm64: dts: imx8mm-u-boot.dtsi: fix typo in ddr blob name   Patrick Wildt
• [PATCH v2 0/4] arm64: imx8mq/imx8mm: cleanup binman configuration   Patrick Wildt
• [PATCH v2 1/4] arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties   Patrick Wildt
• [PATCH v2 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename   Patrick Wildt
• [PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names   Patrick Wildt
• [PATCH v2 4/4] arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming   Patrick Wildt
• [PATCH v2 14/20] arm: dts: Add initial support for J721S2 SoC   Tom Rini
• [PATCH] treewide: invaild -> invalid   Tom Rini
• [PATCH 01/11] arch/arm/mach-bcm283x/msg.c: Fix spelling of "Failed".   Tom Rini
• [PATCH 02/11] drivers/mtd/ubispl/ubispl.c: Fix spelling of "mismatched".   Tom Rini
• [PATCH 03/11] drivers/usb/musb/musb_udc.c: Fix spelling of "mismatch".   Tom Rini
• [PATCH 04/11] arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c: Fix spelling of "resetting".   Tom Rini
• [PATCH 05/11] cmd/Kconfig: Fix spelling of "resetting".   Tom Rini
• [PATCH 06/11] drivers/net/fec_mxc.c: Fix spelling of "resetting".   Tom Rini
• [PATCH 07/11] common/fdt_support.c: Fix spelling of "shouldn't".   Tom Rini
• [PATCH 08/11] drivers/core/of_addr.c: Fix spelling of "shouldn't".   Tom Rini
• [PATCH 09/11] arch/arm/mach-keystone/ddr3.c: Fix spelling of "resetting".   Tom Rini
• [PATCH 10/11] drivers/ddr/altera/sequencer.c: Fix spelling of "resetting".   Tom Rini
• [PATCH 11/11] drivers/usb/gadget/dwc2_udc_otg.c: Fix spelling of "resetting".   Tom Rini
• Please pull u-boot-marvell/master (watchdog related)   Tom Rini
• [PATCH u-boot-marvell v3 0/9] More verifications for kwbimage in SPL   Pali Rohár
• [RFC] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [PATCH] imx: nandbcb: Fix printf format in write_fcb   Pali Rohár
• [PATCH] mkimage: Call verify_header after writing image to disk   Pali Rohár
• [PATCH 02/31] kconfig: Add support for conditional values   Rasmus Villemoes
• [PATCH] spl: add support for custom boot method names   Heiko Thiery
• [PATCH 02/31] kconfig: Add support for conditional values   Tom Rini
• Please pull u-boot-marvell/master (watchdog related)   Stefan Roese
• [PATCH] MAINTAINERS: Add watchdog maintainers entry   Stefan Roese
• [PATCH v2 1/4] arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties   Fabio Estevam
• [PATCH v2 2/4] arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename   Fabio Estevam
• [PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names   Fabio Estevam
• [PATCH v2 4/4] arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming   Fabio Estevam
• [PATCH] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH v2] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH] spl: add support for custom boot method names   Michael Walle
• [PATCH v2 12/12] bloblist: Relicense to allow BSD-3-Clause   Simon Glass
• [PATCH v3 01/12] stddef: Avoid warning with clang with offsetof()   Simon Glass
• [PATCH v2 11/12] bloblist: doc: Bring in the API documentation   Simon Glass
• [PATCH v2 10/12] bloblist: Add functions to obtain base address and size   Simon Glass
• [PATCH v2 09/12] bloblist: Refactor Kconfig to support alloc or fixed   Simon Glass
• [PATCH v2 08/12] bloblist: Use 'phase' consistently for bloblists   Simon Glass
• [PATCH v2 07/12] bloblist: Use LOG_CATEGORY to simply logging   Simon Glass
• [PATCH v2 06/12] bloblist: Use explicit numbering for the tags   Simon Glass
• [PATCH v2 05/12] bloblist: Drop unused tags   Simon Glass
• [PATCH v2 03/12] bloblist: Put the magic number first   Simon Glass
• [PATCH v2 04/12] bloblist: Rename the SPL tag   Simon Glass
• [PATCH v2 02/12] fdt: Drop SPL_BUILD macro   Simon Glass
• [PATCH] genboardscfg: limit to 240 jobs   Simon Glass
• [PATCH] patman: Support absolute and ~user-relative alias files   Simon Glass
• [PATCH 1/1] sandbox: compatibility of os_get_filesize()   Simon Glass
• [PATCH] dm: core: Switch order of pinctrl and power domain calls   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Heinrich Schuchardt
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Simon Glass
• [PATCH v2] drivers: spi-nor: Add JEDEC id for W25Q16JV   Dhananjay Phadke
• [PATCH v2 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Alper Nebi Yasak
• [PATCH] mkimage: Call verify_header after writing image to disk   Simon Glass
• [PATCH v9 0/9] efi: Improvements to U-Boot running on top of UEFI   Simon Glass
• [PATCH v9 0/9] efi: Improvements to U-Boot running on top of UEFI   Heinrich Schuchardt
• [PATCH] scripts: setlocalversion: remove quotes around localversion from config   Nikita Maslov
• [PATCH v9 0/9] efi: Improvements to U-Boot running on top of UEFI   Simon Glass
• [PATCH 1/2] imx: mx6ull: fix REFTOP_VBGADJ setting   Dario Binacchi
• [PATCH 2/2] mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ   Dario Binacchi
• [PATCH 0/3] mkimage: allow to specify signing algorithm   Dhananjay Phadke
• [PATCH v2 8/8] arm: kirkwood: Pogoplug-V4 : Add board maintainer   Tony Dinh
• [PATCH] pci: pci_mvebu: Add support for Kirkwood PCIe controllers   Tony Dinh
• [PATCH] MAINTAINERS: Add watchdog maintainers entry   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH v2 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file   Tony Dinh
• [PATCH 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1   Adam Ford
• [PATCH 2/2] imx: imx8mm_beacon: Enable USB   Adam Ford
• [PATCH v2 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file   Tom Rini
• [PATCH v6 3/4] mtd: spi-nor-core: Add support for Macronix Octal flash   liao jaime
• IMX8MM SD UHS support   Bough Chen
• [PATCH 1/2] mmc: fsl_esdhc_imx: Fix fsl_esdhc_wait_dat0   Bough Chen
• [PATCH v2] introduce CONFIG_DEVICE_TREE_INCLUDES   Rasmus Villemoes
• [resent][PATCH 0/3] mkimage: allow to specify signing algorithm   Jan Kiszka
• [resent][PATCH 1/3] image-fit: Make string of algo parameter constant   Jan Kiszka
• [resent][PATCH 2/3] mkimage: Drop unused OPT_STRING constant   Jan Kiszka
• [resent][PATCH 3/3] mkimage: Allow to specify the signature algorithm on the command line   Jan Kiszka
• [PATCH 0/3] mkimage: allow to specify signing algorithm   Jan Kiszka
• binman generator nodes break over read-back   Jan Kiszka
• [PATCH 1/1] disk: gpt: print all partitions   Alexandre Ghiti
• [PATCH] nvme: Do not allocate 8kB buffer on stack   Pali Rohár
• [PATCH 0/8] Apple M1 NVMe storage support   Mark Kettenis
• [PATCH 1/8] nvme: Split out PCI support   Mark Kettenis
• [PATCH 2/8] mailbox: apple: Add driver for Apple IOP mailbox   Mark Kettenis
• [PATCH 3/8] arm: apple: Add RTKit support   Mark Kettenis
• [PATCH 4/8] nvme: Introduce driver ops   Mark Kettenis
• [PATCH 5/8] nvme: Add shutdown function   Mark Kettenis
• [PATCH 6/8] power: domain: apple: Add reset support   Mark Kettenis
• [PATCH 7/8] nvme: apple: Add driver for Apple NVMe storage controller   Mark Kettenis
• [PATCH 8/8] configs: apple: Add NVMe boot target   Mark Kettenis
• [PATCH] arm64: zynqmp: Change compatible strings for cadence uart   Michal Simek
• [PATCH] arm64: zynqmp: Update USB node handle from dwc3 to usb   Michal Simek
• [PATCH] arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings   Michal Simek
• [PATCH] cmd: Add Kconfig option for multiprocessor cmds   Michal Simek
• [PATCH] net: gem: Workaround gmii2rgmii bridge DT node issue   Michal Simek
• [PATCH] arm64: zynqmp: Change firmware dependency   Michal Simek
• [PATCH 1/2] lmb: Fix lmb property's defination under struct lmb   Michal Simek
• [PATCH 2/2] zynqmp: Run board_get_usable_ram_top() only on main U-Boot   Michal Simek
• [PATCH] Revert "net: gem: Disable broadcast setting"   Michal Simek
• [PATCH] zynqmp: Use the same style for macro definitions   Michal Simek
• [PATCH 0/4] zynqmp: Add support for sending pmufw config object overlay   Michal Simek
• [PATCH 1/4] xilinx: firmware: Introduce zynqmp_pmufw_node() for loading PMU fragments   Michal Simek
• [PATCH 2/4] firmware: zynqmp: Move loading message to debug   Michal Simek
• [PATCH 3/4] firmware: zynqmp: Do not report error if node is already configured   Michal Simek
• [PATCH 4/4] arm64: zynqmp: Add command for disabling loading other overlays   Michal Simek
• [ANN] U-Boot v2022.01 released   Wolfgang Denk
• [PATCH u-boot-marvell v4 0/9] More verifications for kwbimage in SPL   Pali Rohár
• [PATCH u-boot-marvell v4 1/9] arm: mvebu: Check that kwbimage offset and blocksize are valid   Pali Rohár
• [PATCH u-boot-marvell v4 2/9] SPL: Add struct spl_boot_device parameter into spl_parse_board_header()   Pali Rohár
• [PATCH u-boot-marvell v4 3/9] arm: mvebu: Check that kwbimage blockid matches boot mode   Pali Rohár
• [PATCH u-boot-marvell v4 4/9] SPL: Add support for checking board / BootROM specific image types   Pali Rohár
• [PATCH u-boot-marvell v4 5/9] arm: mvebu: Check for kwbimage data checksum   Pali Rohár
• [PATCH u-boot-marvell v4 6/9] arm: mvebu: spl: Print srcaddr in error message   Pali Rohár
• [PATCH u-boot-marvell v4 7/9] arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t   Pali Rohár
• [PATCH u-boot-marvell v4 8/9] arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible   Pali Rohár
• [PATCH u-boot-marvell v4 9/9] arm: mvebu: spl: Fix 100 column exceeds   Pali Rohár
• binman generator nodes break over read-back   Simon Glass
• [PATCH v2] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH v2 0/3] fs/erofs: new filesystem   Huang Jianan
• [PATCH 1/2] stm32mp: remove the bootcount activation   Patrice CHOTARD
• [PATCH 2/2] stm32mp: correct the dependency for bootcount configs   Patrice CHOTARD
• [PATCH 1/1] stm32mp: fix board_get_alt_info_mmc()   Patrice CHOTARD
• [PATCH] board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivated   Patrice CHOTARD
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Heiko Schocher
• [PATCH 1/2] cmd: fuse: add a fuse comparison function   Angus Ainslie
• [PATCH 2/2] cmd: fuse: Add a command to read fuses to memory   Angus Ainslie
• [PATCH u-boot-marvell 0/9] mvebu: Move PCIe code from serdes to PCIe driver   Stefan Roese
• [PATCH] mtd: nand: pxa3xx: use marvell, prefix for custom DT properties   Stefan Roese
• [PATCH 0/3] Add PCIe support for Iomega iConnect board   Stefan Roese
• [PATCH u-boot-marvell] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode determination   Stefan Roese
• [PATCH u-boot-marvell] board: gdsys: Drop Dirk Eibach from MAINTAINERS   Stefan Roese
• [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Stefan Roese
• [PATCH u-boot-marvell v2 00/20] tools: kwbimage: Load address fixes   Stefan Roese
• [PATCH v2] introduce CONFIG_DEVICE_TREE_INCLUDES   Tom Rini
• [PATCH] arm: mvebu: db-88f6720: Fix CONFIG_SPL_TEXT_BASE and remove wrong memory layout   Stefan Roese
• [PATCH] arm: mvebu: Replace hardcoded values 0x0030/0x4030 by proper calculation   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 0/3] QEMU spike machine support for U-Boot   Anup Patel
• [PATCH 1/3] serial: Add RISC-V HTIF console driver   Anup Patel
• [PATCH 2/3] riscv: qemu: Enable HTIF console support   Anup Patel
• [PATCH 3/3] riscv: qemu: Implement is_flash_available() for MTD NOR   Anup Patel
• [PATCH v2] introduce CONFIG_DEVICE_TREE_INCLUDES   Simon Glass
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Simon Glass
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Pali Rohár
• imx8mm-evk does not boot kernel 5.16   Fabio Estevam
• imx8mm-evk does not boot kernel 5.16   Marcel Ziswiler
• [PATCH v3 1/1] rsa: adds rsa3072 algorithm   Tom Rini
• [PATCH] pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2   Tom Rini
• [PATCH] arm: mach-k3: am642_init: Unlock MCU PADCFG regs   Nishanth Menon
• [PATCH] phy: nop-phy: Enable reset-gpios support   Tom Rini
• imx8mm-evk does not boot kernel 5.16   Fabio Estevam
• [PATCH] cmd: Add Kconfig option for multiprocessor cmds   Tom Rini
• [PATCH] phy: nop-phy: Enable reset-gpios support   Adam Ford
• [PATCH v3 1/3] imx: Don't define __ASSEMBLY__ in C files   Simon Glass
• [PATCH v3 2/3] kconfig: Add support for conditional values   Simon Glass
• [PATCH v3 3/3] bloblist: Update to use conditional value   Simon Glass
• imx8mm-evk does not boot kernel 5.16   Marcel Ziswiler
• [PATCH 1/1] efi_loader: fix SectionAlignment, FileAlignment   Heinrich Schuchardt
• [PATCH 1/1] configs: disable UEFI for Colibri VF610   Heinrich Schuchardt
• binman generator nodes break over read-back   Simon Glass
• [RFC 1/1] efi_loader: rename 'efidebug boot' 'bootefi'   Heinrich Schuchardt
• [PATCH] efidebug: avoid 'dfu_alt_info not defined' message   Heinrich Schuchardt
• [PATCH] MAINTAINERS: remove Alexander Graf from EFI PAYLOAD   Heinrich Schuchardt
• [PATCH] pci: pci_mvebu: Add support for Kirkwood PCIe controllers   Tony Dinh
• [PATCH 1/9] doc: add include/dm/uclass.h to the HTML documentation   Heinrich Schuchardt
• [PATCH 2/9] doc: add include/dm/root.h to the HTML documentation   Heinrich Schuchardt
• [PATCH 5/9] doc: add include/dm/device.h to the HTML documentation   Heinrich Schuchardt
• [PATCH 6/9] doc: add include/dm/devres.h to the HTML documentation   Heinrich Schuchardt
• [PATCH 7/9] doc: add include/dm/read.h to the HTML documentation   Heinrich Schuchardt
• [PATCH 9/9] doc: add include/dm/fdtaddr.h to the HTML documentation   Heinrich Schuchardt
• [PATCH 8/9] doc: add include/dm/of*.h to the HTML documentation   Heinrich Schuchardt
• [PATCH v9 9/9] efi: Tidy up some comments in efi header   Heinrich Schuchardt
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Stefan Roese
• [PATCH] pci: pci_mvebu: Add support for Kirkwood PCIe controllers   Stefan Roese
• [PATCH] net: fastboot: make UDP port net: configurable   Ramon Fried
• [PATCH v4] lib: sparse: Make CHUNK_TYPE_RAW buffer aligned   Tom Rini
• [PATCH v3] pci: Work around PCIe link training failures   Tom Rini
• [PATCH] test: test_lsblk: Mark as sandbox specific   Tom Rini
• [PATCH] nvme: Do not allocate 8kB buffer on stack   Tom Rini
• [PATCH] checkpatch: report ERROR only on disabling of fdt and initrd relocation   Tom Rini
• [PATCH] lib: export vsscanf   Tom Rini
• [PATCH] cmd: adc: Report return value on error   Tom Rini
• [PATCH] BRCMNAND: Fix reporting of uncorrectable errors on subpages during page read   Tom Rini
• [PATCH] armv8: apple: Disable PSCI reset   Tom Rini
• [PATCH] phy: nop-phy: Enable reset-gpios support   Tom Rini
• [PATCH 1/1] ARM: qemu-arm: Fix build fail with boot devices disabled   Tom Rini
• [PATCH v3] phy: Track power-on and init counts in uclass   Tom Rini
• [PATCH] env: fat: Add new lines at the end of print statements   Tom Rini
• [PATCH] lib: Kconfig: fix PHANDLE_CHECK_SEQ position outside of menu   Tom Rini
• [PATCH] gpio: mxc_gpio: Fix i.MX8M GPIO output status read   Fabio Estevam
• [PATCH] arm: imx: imx8mq: add support to get values for more clocks   Fabio Estevam
• [PATCH] imx8mm-venice-gw7902: fix M2_RST# gpio pinmux   Fabio Estevam
• [PATCH] mxs: power: Change sequence of enabling DCDC switches   Fabio Estevam
• [PATCH] imx: nandbcb: Fix printf format in write_fcb   Fabio Estevam
• [PATCH] mx6: Use imx6_src_get_boot_mode() to check boot device   Fabio Estevam
• [PATCH] imx: spl: Fix typo BMODE_EMI -> BMODE_EIM   Fabio Estevam
• [PATCH] ARM: imx8m: support env in fat and ext4   Fabio Estevam
• [PATCH 1/1] imx8mm-cl-iot-gate-optee: add CONFIG_SPL_MMC and CONFIG_SPL_SERIAL   Fabio Estevam
• [PATCH v2 1/2] imx8m: add regs used by GPMI   Fabio Estevam
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Fabio Estevam
• [PATCH] ARM: imx6: dh-imx6: Add update_sf script to install U-Boot into SF   Fabio Estevam
• [PATCH 1/1] configs: opos6uldev: update to have screen working at power on   Fabio Estevam
• [PATCH] spi: mxc_spi: remove redundant code in spi_xchg_single()   Fabio Estevam
• [PATCH 1/1] video: mxsfb: fix pixel clock polarity   Fabio Estevam
• [PATCH] arm:dts:k3-am64-sk: EMIF tool update to 0.8.0 with 1333MTs for lpddr4   Tom Rini
• [PATCH v3 2/3] kconfig: Add support for conditional values   Simon Glass
• [PATCH] net: gem: Workaround gmii2rgmii bridge DT node issue   Ramon Fried
• [PATCH] Revert "net: gem: Disable broadcast setting"   Ramon Fried
• [PATCH v2] cmd: pxe_utils: sysboot: add label override support   Ramon Fried
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Ramon Fried
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Ramon Fried
• [PATCH 2/2] net: dsa: sja1105: fix device id detection   Ramon Fried
• [PATCH 2/2] net: dsa: sja1105: fix device id detection   Ramon Fried
• [PATCH] net: phy: add TI DP83869HM ethernet driver   Ramon Fried
• [PATCH] net: eth-phy: Demote missing phy-handle log message to debug   Ramon Fried
• [PATCH v3] net: fsl: Fix busy flag polling register   Ramon Fried
• [PATCH] net: fastboot: make UDP port net: configurable   Ramon Fried
• [PATCH v7 04/19] rockchip: rk3066: add clock driver for rk3066 soc   Sean Anderson
• [PATCH v7 07/19] rockchip: rk3066: fix assigned-clocks rk3066_clk_set_rate   Sean Anderson
• [PATCH v2 3/6] clk: sunxi: v3s: fix tabs / spaces   Sean Anderson
• [PATCH v4 1/6] clk: actions: Introduce dummy get/set_rate callbacks   Sean Anderson
• [PATCH v4 2/6] clk: actions: Add SD/MMC clocks   Sean Anderson
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Simon Glass
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Heinrich Schuchardt
• [PATCH 1/1] mkimage: struct stat.st_size may not be long   Heinrich Schuchardt
• Please pull u-boot-net/next   Ramon Fried
• [PATCH 0/3] clk: Some build infrastructure cleanups   Sean Anderson
• [PATCH] clk: Remove no-op request and rfree callbacks   Sean Anderson
• [PATCH] clk: versaclock: Remove xlate function   Sean Anderson
• [PATCH v2 0/5] clk: Clean up optional helpers, and add API docs to HTML   Sean Anderson
• (subset) [PATCH v2 1/2] clk: cdce9xx: Convert .of_xlate to .request   Sean Anderson
• [PATCH v2] drivers: spi-nor: Add JEDEC id for W25Q16JV   Dhananjay Phadke
• [PATCH v3 0/1] clk: Clean up optional helpers, and add API docs to HTML   Sean Anderson
• [PATCH v3 1/1] clk: Add clk_get_by_name_optional   Sean Anderson
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Jesse Taube
• [PATCH 0/7] clk: Make clk_free return void   Sean Anderson
• [PATCH 1/7] clk: Make rfree return void   Sean Anderson
• [PATCH 2/7] dma: bcm6348: Don't check clk_free   Sean Anderson
• [PATCH 3/7] net: bcm63xx: Don't check clk_free   Sean Anderson
• [PATCH 4/7] phy: bcm63xx: Don't check clk_free   Sean Anderson
• [PATCH 5/7] spi: bcm63xx: Don't check clk_free   Sean Anderson
• [PATCH 6/7] spi: dw: Don't check clk_free   Sean Anderson
• [PATCH 7/7] clk: Make clk_free return void   Sean Anderson
• [BUG] U-Boot selftest for ESRT table: %pUl   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: implement printing GUIDs   Heinrich Schuchardt
• [PATCH 0/8] efi_loader: simplify printing GUIDs   Heinrich Schuchardt
• [PATCH 1/8] lib: compile uuid_guid_get_str if CONFIG_LIB_UUID=y   Heinrich Schuchardt
• [PATCH 2/8] lib: printf code %pUs for GUID text representation   Heinrich Schuchardt
• [PATCH 3/8] disk: simplify part_print_efi()   Heinrich Schuchardt
• [PATCH 4/8] sandbox: imply PARTITION_TYPE_GUID   Heinrich Schuchardt
• [PATCH 5/8] test: add test for %pUs   Heinrich Schuchardt
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   Heinrich Schuchardt
• [PATCH 7/8] efi_loader: user %pUs for printing GUIDs   Heinrich Schuchardt
• [PATCH 8/8] cmd: printenv: simplify printing GUIDs   Heinrich Schuchardt
• [PATCH] binman: Skip node generation for images read from files   Jan Kiszka
• [PATCH 0/2] Apple M1 laptop keyboard support   Mark Kettenis
• [PATCH 1/2] spi: apple: Add driver for Apple SPI controller   Mark Kettenis
• [PATCH 2/2] input: apple: Add support for Apple SPI keyboard   Mark Kettenis
• [RFC] nvme: Split out PCI support   Mark Kettenis
• [PATCH] spl: add support for custom boot method names   Michael Walle
• [PATCH 1/1] efi_loader: printing TCG2 protocol GUID   Heinrich Schuchardt
• [PATCH v3 0/4] rockchip: sdhci: Fix reinit and add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v3 1/4] mmc: sdhci: Add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v3 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Alper Nebi Yasak
• [PATCH v3 3/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399   Alper Nebi Yasak
• [PATCH v3 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Alper Nebi Yasak
• [PATCH v4 00/13] kconfig: Add some new macros   Simon Glass
• [PATCH v4 01/13] imx: Don't define __ASSEMBLY__ in C files   Simon Glass
• [PATCH v4 02/13] mips: Avoid using config_enabled() directly   Simon Glass
• [PATCH v4 03/13] mmc: fsl: Use brackets around if()   Simon Glass
• [PATCH v4 04/13] kconfig: Update IS_ENABLED() internals   Simon Glass
• [PATCH v4 05/13] kconfig: Add support for conditional values   Simon Glass
• [PATCH v4 06/13] bloblist: Update to use conditional value   Simon Glass
• [PATCH v4 07/13] patman: Update test_util to run doc tests   Simon Glass
• [PATCH v4 08/13] buildman: Add a flag to control the traceback   Simon Glass
• [PATCH v4 09/13] buildman: Make use of test_util   Simon Glass
• [PATCH v4 10/13] buildman: Add helper functions for updating .config files   Simon Glass
• [PATCH v4 11/13] buildman: Provide a hint on how to debug thread crashes   Simon Glass
• [PATCH v4 12/13] buildman: Allow adjusting board config on the fly   Simon Glass
• [PATCH v4 13/13] test: Add some tests for kconfig.h   Simon Glass
• [PATCH v4 03/13] mmc: fsl: Use brackets around if()   Sean Anderson
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Milan P. Stanić
• [PATCH v2] imx8mq_evk: configs: add/cleanup variables for distro boot   Andrey Zhizhikin
• [PATCH v2] imx8mq_evk: configs: add/cleanup variables for distro boot   ZHIZHIKIN Andrey
• [PATCH 1/1] drivers: octeon: get rid of Unicode in code   Heinrich Schuchardt
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Heinrich Schuchardt
• [PATCH V2] mkimage: fix segfault on MacOS arm64   Sergey V. Lobanov
• [BUG] sandbox: NO_SDL=1 gcc: error: arch/sandbox/cpu/sdl.o: No such file or directory   Milan P. Stanić
• [PATCH] mkimage: fix segfault on MacOS arm64   Sergey V. Lobanov
• [GIT PULL] Please pull u-boot-pmic master   Jaehoon Chung
• [PATCH v4 03/13] mmc: fsl: Use brackets around if()   Jaehoon Chung
• [PATCH] efidebug: avoid 'dfu_alt_info not defined' message   AKASHI Takahiro
• [RFC 1/1] efi_loader: rename 'efidebug boot' 'bootefi'   AKASHI Takahiro
• [PATCH 1/1] i2c: mvtwsi: Add compatible string for allwinner, sun4i-a10-i2c   Andre Przywara
• [PATCH] sunxi: call fdt_fixup_ethernet again to set macaddr for more aliases   Andre Przywara
• [PATCH v8 12/12] (RFC) efi_loader, dts: add public keys for capsules to device tree   AKASHI Takahiro
• [PATCH v8 06/12] test/py: efi_capsule: add image authentication test   AKASHI Takahiro
• [PATCH v8 07/12] tools: mkeficapsule: allow for specifying GUID explicitly   AKASHI Takahiro
• [PATCH] binman: Skip node generation for images read from files   Simon Glass
• [PATCH v1] serial: npcm: Add support for Nuvoton NPCM SoCs   Stanley Chu
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Aswath Govindraju
• [PATCH v2 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC   Aswath Govindraju
• [PATCH v2] binman: Skip node generation for images read from files   Jan Kiszka
• [PATCH v2 09/20] ram: k3-ddrss: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v2 11/20] board: ti: j721s2: Add board support for J721S2   Aswath Govindraju
• [EXT] [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Moti Buskila
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Aswath Govindraju
• [RFC 1/1] efi_loader: rename 'efidebug boot' 'bootefi'   Ilias Apalodimas
• [PATCH v8 03/12] tools: mkeficapsule: add firmwware image signing   AKASHI Takahiro
• [PATCH] pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2   Anthony Bagwell
• [PATCH] Revert "net: gem: Disable broadcast setting"   Michal Simek
• [PATCH] net: gem: Workaround gmii2rgmii bridge DT node issue   Michal Simek
• [PATCH] MAINTAINERS: Add watchdog maintainers entry   Harald Seiler
• [PATCH v2] cmd: Add Kconfig option for multiprocessor cmds   Michal Simek
• [PATCH] cmd: Add Kconfig option for multiprocessor cmds   Michal Simek
• [PATCH 1/4] i2c: at91: add compatible with microchip,sama7g5-i2c   Eugen.Hristev at microchip.com
• [RFC 1/1] efi_loader: rename 'efidebug boot' 'bootefi'   Heinrich Schuchardt
• [RFC 1/1] efi_loader: rename 'efidebug boot' 'bootefi'   Ilias Apalodimas
• [PATCH] env: fat: Add new lines at the end of print statements   AKASHI Takahiro
• imx8mm-evk does not boot kernel 5.16   Frieder Schrempf
• [PATCH v3] pci: Work around PCIe link training failures   Maciej W. Rozycki
• [PATCH] imx: ventana: correct splashimage load address   Andrey Zhizhikin
• [PULL] u-boot-at91-2022.04-b   Eugen.Hristev at microchip.com
• [PATCH] efidebug: avoid 'dfu_alt_info not defined' message   Heinrich Schuchardt
• [PATCH v4 01/13] imx: Don't define __ASSEMBLY__ in C files   Tom Rini
• [PATCH v2 11/20] board: ti: j721s2: Add board support for J721S2   Tom Rini
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Tom Rini
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH] spl: spl_sdp: don't call board_usb_init twice   Angus Ainslie
• [PATCH v2] spl: add support for custom boot method names   Heiko Thiery
• [PATCH] pinctrl: nxp: don't automatically select DEVRES   Angus Ainslie
• [EXT] [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Marek Behún
• [PATCH v4 03/13] mmc: fsl: Use brackets around if()   Minkyu Kang
• [RFC 0/6] Exynos5: Update devicetree files from linux kernel   Minkyu Kang
• [PATCH 6/8] configs: am64x_evm: set eth1 as boot interface   Tom Rini
• [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Tom Rini
• [PATCH v2 1/1] env: fat: Allow overriding interface, device and partition   hyyxohk
• [PATCH v2 00/16] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH v2 01/16] spl: Tidy up the header includes   Simon Glass
• [PATCH v2 02/16] arm: qemu: Add an SPL build   Simon Glass
• [PATCH v2 03/16] spl: Rename jump_to_image_no_args()   Simon Glass
• [PATCH v2 04/16] passage: Support an incoming passage   Simon Glass
• [PATCH v2 05/16] passage: Support a control devicetree   Simon Glass
• [PATCH v2 06/16] passage: arm: Accept a passage from the previous phase   Simon Glass
• [PATCH v2 07/16] passage: spl: Support adding the dtb to the passage bloblist   Simon Glass
• [PATCH v2 08/16] passage: spl: Support passing the passage to U-Boot   Simon Glass
• [PATCH v2 09/16] passage: arm: Add the arch-specific standard passage impl   Simon Glass
• [PATCH v2 10/16] passage: Add a qemu test for ARM   Simon Glass
• [PATCH v2 11/16] sandbox: Add a way of checking structs for standard passage   Simon Glass
• [PATCH v2 12/16] passage: Add documentation   Simon Glass
• [PATCH v2 13/16] passage: Add docs for spl_handoff   Simon Glass
• [PATCH v2 14/16] x86: Move Intel GNVS file into the common include directory   Simon Glass
• [PATCH v2 15/16] passage: Add checks for pre-existing blobs   Simon Glass
• [PATCH v2 16/16] WIP: RFC: Add a gitlab test   Simon Glass
• [PATCH 00/13] Add support for the Purism Librem5 Phone   Angus Ainslie
• [PATCH 01/13] MAINTAINERS: add Purism to the maintainers file   Angus Ainslie
• [PATCH 02/13] arm: dts: add the Purism devicetree files   Angus Ainslie
• [PATCH 03/13] arm: imx8m: add Purism Librem5 Kconfig   Angus Ainslie
• [PATCH 04/13] configs: add the Librem5 defconfig   Angus Ainslie
• [PATCH 05/13] include: configs: add the librem5.h include file   Angus Ainslie
• [PATCH 06/13] board: librem5: add the u-boot source for the Librem5   Angus Ainslie
• [PATCH 07/13] board: librem5: add the u-boot header for the Librem5   Angus Ainslie
• [PATCH 08/13] board: librem5: add the SPL source for the Librem5   Angus Ainslie
• [PATCH 09/13] board: librem5: add the LPDDR4 source for the Librem5   Angus Ainslie
• [PATCH 11/13] board: librem5: add Librem5 MAINTAINERS file   Angus Ainslie
• [PATCH 12/13] board: librem5: add Librem5 build files   Angus Ainslie
• [PATCH 13/13] doc: librem5: add Librem5 documentation   Angus Ainslie
• [EXT] [PATCH u-boot-marvell] ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Moti Buskila
• [PATCH 10/13] board: librem5: add SPL loader configuration   Angus Ainslie
• [PATCH v3] spl: add support for custom boot method names   Heiko Thiery
• [PATCH 0/3] sandox: test: activate tests for the command LOG   Patrick DELAUNAY
• [PATCH 0/4] pci: Extend 'pci' and 'pci regions' commands   Pali Rohár
• [PATCH 1/4] pci: Fix setting controller's last_busno   Pali Rohár
• [PATCH 2/4] pci: Extend 'pci regions' command with bus number   Pali Rohár
• [PATCH 3/4] pci: Add checks for valid cmdline arguments   Pali Rohár
• [PATCH 4/4] pci: Extend 'pci' command with bus option '*'   Pali Rohár
• [PATCH v2 0/3] sandbox: test: activate tests for the command LOG   Patrick Delaunay
• [PATCH v2 1/3] dm: fix up documentation for uclass_get_by_name_len   Patrick Delaunay
• [PATCH v2 2/3] dm: compare full name in uclass_get_by_name   Patrick Delaunay
• [PATCH v2 3/3] sandbox: test: activate tests for the command LOG   Patrick Delaunay
• [PATCH] gpio: mxc_gpio: Fix i.MX8M GPIO output status read   Harm Berntsen
• [PATCH 1/9] doc: add include/dm/uclass.h to the HTML documentation   Patrick DELAUNAY
• Please pull u-boot-net/next   Tom Rini
• [GIT PULL] Please pull u-boot-pmic master   Tom Rini
• [PULL] u-boot-at91-2022.04-b   Tom Rini
• [PATCH 1/2] lmb: Fix lmb property's defination under struct lmb   Patrick DELAUNAY
• [PATCH v2 12/16] passage: Add documentation   Mark Kettenis
• [PATCH] gpio: mxc_gpio: Fix i.MX8M GPIO output status read   Fabio Estevam
• [PATCH 00/13] Add support for the Purism Librem5 Phone   Tom Rini
• [PATCH 01/13] MAINTAINERS: add Purism to the maintainers file   Tom Rini
• [PATCH 02/13] arm: dts: add the Purism devicetree files   Tom Rini
• [PATCH 05/13] include: configs: add the librem5.h include file   Tom Rini
• [PATCH 13/13] doc: librem5: add Librem5 documentation   Tom Rini
• imx8mm-evk does not boot kernel 5.16   Tim Harvey
• [PATCH 00/13] Add support for the Purism Librem5 Phone   Angus Ainslie
• [PATCH 00/13] Add support for the Purism Librem5 Phone   Angus Ainslie
• imx8mm-evk does not boot kernel 5.16   Fabio Estevam
• [PATCH 00/13] Add support for the Purism Librem5 Phone   Tom Rini
• [PATCH 00/13] Add support for the Purism Librem5 Phone   Tom Rini
• [PATCH 02/13] arm: dts: add the Purism devicetree files   Angus Ainslie
• [PATCH V3] sf: Querying write-protect status before operating the flash   Tom Rini
• [PATCH 02/13] arm: dts: add the Purism devicetree files   Tom Rini
• [PATCH] board: ti: am335x: Choose CPSW or PRUSS configuration based on jumper setting   Tom Rini
• [PATCH] nand: gpmc: Handle bitflips in erased pages when using BCH ECC engine   Tom Rini
• [PATCH 1/1] Fix wrong QSPI clock calculation for AM4372   Tom Rini
• [PATCH] configs: am43xx_hs_evm: Add SPL_USB_STORAGE Support   Tom Rini
• [PATCH] arm: mach-k3: am642_init: Unlock MCU PADCFG regs   Tom Rini
• [PATCH] omap: timer: implement timer_get_boot_us   Tom Rini
• [PATCH] ARM: mach-k3: sysfw-loader: Copy sysfw.itb to OCRAM in OSPI/SPI bootmode   Tom Rini
• [PATCH] dma: ti: k3-udma: Fix rflow reservation for PKTDMA   Tom Rini
• [PATCH 1/8] mach-k3: common: Instantiate AM65 CPSW NUSS wrapper   Tom Rini
• [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode   Tom Rini
• [PATCH 3/8] board: ti: am64x: Init DRAM size in R5/A53 SPL   Tom Rini
• [PATCH 4/8] mach-k3: am642_init: Probe AM65 CPSW NUSS for R5/A53 SPL   Tom Rini
• [PATCH 5/8] mach-k3: am64_spl: Alias Ethernet RGMII boot to CPGMAC   Tom Rini
• [PATCH 7/8] ARM: dts: K3-am642-r5-sk: Enable Second CPSW port in R5/A53 SPL   Tom Rini
• [PATCH] gpio: da8xx_gpio: Fix gpio name with address   Tom Rini
• [PATCH 02/13] arm: dts: add the Purism devicetree files   Angus Ainslie
• [PATCH 02/13] arm: dts: add the Purism devicetree files   Tom Rini
• [PATCH v2] image-board: fix wrong implementation ram disk address setup from cmdline   Tom Rini
• [PATCH 1/1] mkimage: struct stat.st_size may not be long   Milan P. Stanić
• [PATCH 1/1] mkimage: struct stat.st_size may not be long   Mark Kettenis
• [PATCH] arm: dts: imx8mq kernel dts updates   Angus Ainslie
• [PATCH] cmd: mmc: Consider GP partitions in mmc hwpartition user enh start -   Marek Vasut
• [PATCH] imx8mn-ddr4-evk: generate single bootable image   Andrey Zhizhikin
• [PATCH V2] phy: nop-phy: Enable reset-gpios support   Adam Ford
• [PATCH V2] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH v8 00/15] Add Rikomagic MK808 board   Johan Jonker
• [PATCH v8 01/15] rockchip: rk3066-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v8 02/15] rockchip: rk3066: add grf header file   Johan Jonker
• [PATCH v8 03/15] rockchip: rk3066: add clock driver for rk3066 soc   Johan Jonker
• [PATCH v8 04/15] rockchip: rk3066: add rk3066 pinctrl driver   Johan Jonker
• [PATCH v8 05/15] rockchip: rk3066: add sdram driver   Johan Jonker
• [PATCH v8 06/15] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v8 07/15] arm: dts: rockchip: add rk3066a.dtsi   Johan Jonker
• [PATCH v8 08/15] arm: dts: rockchip: add rk3066a-mk808.dts   Johan Jonker
• [PATCH v8 09/15] rockchip: rk3066: add include   Johan Jonker
• [PATCH v8 10/15] rockchip: rk3066: add rk3066_common.h include   Johan Jonker
• [PATCH v8 11/15] rockchip: rk3066: add core support   Johan Jonker
• [PATCH v8 12/15] rockchip: rk3066: add Rikomagic MK808 board   Johan Jonker
• [PATCH v8 13/15] rockchip: rk3066: add mk808_defconfig   Johan Jonker
• [PATCH v8 14/15] rockchip: tools: add rk3066 support to rkcommon.c   Johan Jonker
• [PATCH v8 15/15] doc: rockchip: add rk3066 Rikomagic MK808   Johan Jonker
• Falcon Mode Support For Uncompressed Kernel Images   Nathan Barrett-Morrison
• Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Nathan Barrett-Morrison
• [PATCH] efidebug: avoid 'dfu_alt_info not defined' message   AKASHI Takahiro
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Tim Harvey
• imx8mm-evk does not boot kernel 5.16   Jacky Bai
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Fabio Estevam
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Adam Ford
• [PATCH 2/8] lib: printf code %pUs for GUID text representation   AKASHI Takahiro
• [PATCH v9 00/11] efi_loader: capsule: improve capsule authentication support   AKASHI Takahiro
• [PATCH v9 01/11] tools: mkeficapsule: output messages to stderr instead of stdout   AKASHI Takahiro
• [PATCH v9 02/11] tools: mkeficapsule: rework the code a little bit   AKASHI Takahiro
• [PATCH v9 03/11] tools: build mkeficapsule with tools-only_defconfig   AKASHI Takahiro
• [PATCH v9 04/11] tools: mkeficapsule: add firmware image signing   AKASHI Takahiro
• [PATCH v9 05/11] tools: mkeficapsule: add man page   AKASHI Takahiro
• [PATCH v9 06/11] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v9 07/11] test/py: efi_capsule: add image authentication test   AKASHI Takahiro
• [PATCH v9 08/11] tools: mkeficapsule: allow for specifying GUID explicitly   AKASHI Takahiro
• [PATCH v9 09/11] test/py: efi_capsule: align with the syntax change of mkeficapsule   AKASHI Takahiro
• [PATCH v9 10/11] test/py: efi_capsule: add a test for "--guid" option   AKASHI Takahiro
• [PATCH v9 11/11] test/py: efi_capsule: check the results in case of CAPSULE_AUTHENTICATE   AKASHI Takahiro
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Aswath Govindraju
• [PATCH v3 0/4] arm: kirkwood: Add support for Pogoplug V4   Tony Dinh
• [PATCH v3 1/4] arm: kirkwood: Pogoplug-V4 : Add DTS files   Tony Dinh
• [PATCH v3 2/4] arm: kirkwood: Pogoplug V4 : Add board include header and defconfig files   Tony Dinh
• [PATCH v3 3/4] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Tony Dinh
• [PATCH v3 4/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH v3 1/1] rsa: adds rsa3072 algorithm   Jamin Lin
• [PATCH v3 1/1] rsa: adds rsa3072 algorithm   Jamin Lin
• [PATCH v2] ARM: mvebu: x530: Add option for ECC   Stefan Roese
• [PATCH v3 00/20] J721S2: Add initial support   Aswath Govindraju
• [PATCH v3 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Aswath Govindraju
• [PATCH v3 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance   Aswath Govindraju
• [PATCH v3 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems   Aswath Govindraju
• [PATCH v3 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple DDR subsystems   Aswath Govindraju
• [PATCH v3 05/20] arm: K3: Add basic support for J721S2 SoC definition   Aswath Govindraju
• [PATCH v3 06/20] drivers: dma: Add support for J721S2   Aswath Govindraju
• [PATCH v3 07/20] clk: clk-k3: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v3 08/20] power: domain: ti: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v3 09/20] ram: k3-ddrss: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v3 10/20] soc: ti: k3-socinfo: Add entry for J721S2 SoC   Aswath Govindraju
• [PATCH v3 11/20] board: ti: j721s2: Add board support for J721S2   Aswath Govindraju
• [PATCH v3 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC   Aswath Govindraju
• [PATCH v3 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2   Aswath Govindraju
• [PATCH v3 14/20] arm: dts: Add initial support for J721S2 SoC   Aswath Govindraju
• [PATCH v3 15/20] arm: dts: Add initial support for J721S2 System on Module   Aswath Govindraju
• [PATCH v3 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board   Aswath Govindraju
• [PATCH v3 17/20] arm: dts: k3-j721s2: Add r5 specific dt support   Aswath Govindraju
• [PATCH v3 18/20] arm: dts: k3-j721s2-ddr: Add DDR support   Aswath Govindraju
• [PATCH v3 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig   Aswath Govindraju
• [PATCH v3 20/20] configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig   Aswath Govindraju
• [PATCH v2] image-board: fix wrong implementation ram disk address setup from cmdline   Art Nikpal
• [PATCH v2 00/20] J721S2: Add initial support   Aswath Govindraju
• [PATCH v3 4/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Stefan Roese
• [PATCH v2] ARM: mvebu: x530: Add option for ECC   Chris Packham
• [PATCH] dfu: mtd: skip empty pages when writing page for UBI partition   Patrick Delaunay
• [PATCH] stm32prog: add partition name in treat_partition_list error messages   Patrick Delaunay
• [PATCH 0/2] arm: mvebu: Remove comphy_update_map()   Pali Rohár
• [PATCH 1/2] arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()   Pali Rohár
• [PATCH 2/2] phy: marvell: Remove unused function comphy_update_map()   Pali Rohár
• [PATCH] arm: a37xx: Disable CONFIG_DEBUG_UART_ANNOUNCE   Pali Rohár
• [PATCH 0/3] QEMU spike machine support for U-Boot   Bin Meng
• [PATCH v3 00/11] dra7: bring up and support IPU load/start   Amjad Ouled-Ameur
• [PATCH v3 01/11] configs: dra7xx_evm: Increase the size of SPL_MULTI_DTB_FIT   Amjad Ouled-Ameur
• [PATCH v3 02/11] reset: dra7: Add a reset driver   Amjad Ouled-Ameur
• [PATCH v3 03/11] arm: mach-omap2: load/start remoteproc IPU1/IPU2   Amjad Ouled-Ameur
• [PATCH v3 04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Amjad Ouled-Ameur
• [PATCH v3 05/11] linux: bitmap.h: Add find_next_zero_area function   Amjad Ouled-Ameur
• [PATCH v3 06/11] remoteproc: uclass: Add remoteproc resource handling helpers   Amjad Ouled-Ameur
• [PATCH v3 07/11] remoteproc: ipu: Add driver to bring up ipu   Amjad Ouled-Ameur
• [PATCH v3 08/11] dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes   Amjad Ouled-Ameur
• [PATCH v3 09/11] arm: dts: dra7: Add ipu and related nodes   Amjad Ouled-Ameur
• [PATCH v3 10/11] arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes   Amjad Ouled-Ameur
• [PATCH v3 11/11] dts: am57xx*: Add ipu early boot DT changes   Amjad Ouled-Ameur
• [PATCH 0/3] QEMU spike machine support for U-Boot   Anup Patel
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH] arm: a37xx: Disable CONFIG_DEBUG_UART_ANNOUNCE   Stefan Roese
• [PATCH 1/2] arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()   Stefan Roese
• [PATCH 2/2] phy: marvell: Remove unused function comphy_update_map()   Stefan Roese
• [PATCH v2] ARM: mvebu: x530: Add option for ECC   Stefan Roese
• [PATCH] imx: ventana: correct splashimage load address   Fabio Estevam
• [PATCH] imx8mn-ddr4-evk: generate single bootable image   Fabio Estevam
• [PATCH] lib/crypto: Enable more algorithms in cert verification   AKASHI Takahiro
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Tom Rini
• [PATCH u-boot-dm v2] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Stefan Roese
• [PATCH v2 1/2] cmd: source: Use script from default config   Tom Rini
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Heinrich Schuchardt
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Nishanth Menon
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH u-boot-dm v3] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• [PATCH u-boot-dm v2] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• [PATCH v2 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Tom Rini
• [PATCH u-boot-dm v3] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Stefan Roese
• [PATCH 1/2] lmb: Fix lmb property's defination under struct lmb   Michal Simek
• [PATCH] gpio: mxc_gpio: Fix i.MX8M GPIO output status read   Harm Berntsen
• [PATCH 1/2] lmb: Fix lmb property's defination under struct lmb   Heinrich Schuchardt
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Heinrich Schuchardt
• [PATCH u-boot-dm v3] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Stefan Roese
• [PATCH] imx: ventana: correct splashimage load address   Tim Harvey
• [PATCH] gpio: mxc_gpio: Fix i.MX8M GPIO output status read   Fabio Estevam
• [PATCH] mxc_gpio: on imx8m read the DR instead of the PSR   Fabio Estevam
• [PATCH 1/1] i2c: mvtwsi: Add compatible string for allwinner, sun4i-a10-i2c   Chris Morgan
• [PATCH] drivers: musb_gadget: Save endpoint desc to usb_ep->desc   Tom Rini
• [PATCH] pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2   Tom Rini
• [PATCH] fs/btrfs: fix a bug that U-boot fs btrfs implementation doesn't handle NO_HOLE feature correctly   Tom Rini
• [PATCH 1/2] lib: add BLAKE2 hash support   Tom Rini
• [PATCH 2/2] fs/btrfs: add dependency on BLAKE2 hash   Tom Rini
• [PATCH v2 1/7] common: spl: move armv7m-specific code to spl_perform_fixups()   Tom Rini
• [PATCH v2 2/7] common: remove bedbug debugger support   Tom Rini
• [PATCH v2 3/7] common: board_r: drop initr_kgdb wrapper   Tom Rini
• [PATCH v2 4/7] common: board_r: drop initr_addr_map wrapper   Tom Rini
• [PATCH v2 5/7] common: board_r: move init_addr_map() to init.h   Tom Rini
• [PATCH v2 6/7] common: board_r: include asm-generic/gpio.h   Tom Rini
• [PATCH v2 7/7] common: board_r: drop ifdefs around header includes   Tom Rini
• [PATCH v2] arm: dts: Aspeed: add Bletchley dts   Tom Rini
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH] mtd: nand: pxa3xx: set mtd->dev   Tom Rini
• [PATCH v4 02/13] mips: Avoid using config_enabled() directly   Daniel Schwierzeck
• [PATCH] smegw01: Update DDR initialization   Fabio Estevam
• [PATCH v4 1/6] clk: actions: Introduce dummy get/set_rate callbacks   Tom Rini
• [PATCH v4 2/6] clk: actions: Add SD/MMC clocks   Tom Rini
• [PATCH v4 3/6] ARM: dts: sync Actions Semi S700 DT from Linux v5.16-rc3   Tom Rini
• [PATCH v4 4/6] ARM: dts: s700: add MMC/SD controller node   Tom Rini
• [PATCH v4 5/6] mmc: actions: add MMC driver for Actions OWL S700/S900   Tom Rini
• [PATCH v4 6/6] configs: Enable mmc support   Tom Rini
• [next 2/5] net: ftgmac100: Add Aspeed AST2600 support   Tom Rini
• [next 1/5] net: ftgmac100: Add DM_MDIO support   Tom Rini
• [next 3/5] ARM: dts: ast2600: Add MDIO devices   Tom Rini
• [next 4/5] configs: ast2600: enable DM_MDIO and MDIO driver   Tom Rini
• [next 5/5] clk: ast2600: Revise MII interface delay   Tom Rini
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Fabio Estevam
• [PATCH 1/1] miiphy.h: Remove CONFIG_DM_xxx guards   Tom Rini
• [PATCH 1/1] doc: printf() codes   Heinrich Schuchardt
• [PATCH 1/1] bootcount: fix printf() code   Heinrich Schuchardt
• [PATCH v3 4/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH v3 00/31] Initial implementation of standard boot   Simon Glass
• [PATCH v3 01/31] str: Move string tests to the string module   Simon Glass
• [PATCH v3 02/31] test: Add tests for trailing_strtol()   Simon Glass
• [PATCH v3 03/31] str: Fix a few bugs in trailing_strtoln()   Simon Glass
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   Simon Glass
• [PATCH v3 05/31] dm: core: Rename uclass_get_by_name_len()   Simon Glass
• [PATCH v3 06/31] dm: core: Allow finding a uclass device by partial name   Simon Glass
• [PATCH v3 07/31] test: fastboot: Avoid using mmc1   Simon Glass
• [PATCH v3 08/31] test: dm: Restart USB before assuming it is stopped   Simon Glass
• [PATCH v3 09/31] dm: blk: Add a function to return the device type   Simon Glass
• [PATCH v3 10/31] bootstd: Add the concept of a bootflow   Simon Glass
• [PATCH v3 11/31] bootstd: Add the bootstd uclass and core implementation   Simon Glass
• [PATCH v3 12/31] bootstd: Add the bootdev uclass   Simon Glass
• [PATCH v3 13/31] bootstd: Add the bootmeth uclass and helpers   Simon Glass
• [PATCH v3 14/31] bootstd: Add support for bootflows   Simon Glass
• [PATCH v3 15/31] bootstd: Add a bootdev command   Simon Glass
• [PATCH v3 16/31] bootstd: Add a bootflow command   Simon Glass
• [PATCH v3 17/31] bootstd: Add a bootmeth command   Simon Glass
• [PATCH v3 18/31] bootstd: Add an implementation of distro boot   Simon Glass
• [PATCH v3 19/31] bootstd: mmc: Add a bootdev driver   Simon Glass
• [PATCH v3 20/31] bootstd: ethernet: Add a bootdev driver   Simon Glass
• [PATCH v3 21/31] bootstd: Add an implementation of distro PXE boot   Simon Glass
• [PATCH v3 22/31] bootstd: Add an implementation of EFI boot   Simon Glass
• [PATCH v3 23/31] bootstd: Add a system bootdev for strange boot methods   Simon Glass
• [PATCH v3 24/31] bootstd: Add an implementation of EFI bootmgr   Simon Glass
• [PATCH v3 25/31] bootstd: Add a sandbox bootmeth driver   Simon Glass
• [PATCH v3 26/31] bootstd: Add an implementation of script boot   Simon Glass
• [PATCH v3 27/31] bootstd: usb: Add a bootdev driver   Simon Glass
• [PATCH v3 28/31] bootstd: Add tests for bootstd including all uclasses   Simon Glass
• [PATCH v3 29/31] bootstd: Add setup for the bootflow tests   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH 1/1] doc: printf() codes   AKASHI Takahiro
• [v2] board: ls1088a: update ifc node name to be memory-controller   Jianpeng Bu
• [PATCH] lib/crypto: Enable more algorithms in cert verification   AKASHI Takahiro
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH v3 22/31] bootstd: Add an implementation of EFI boot   Michael Walle
• [PATCH v3 00/31] Initial implementation of standard boot   Michael Walle
• [PATCH v4 0/1] rsa: adds rsa3072 algorithm   Jamin Lin
• [PATCH v4 1/1] rsa: adds rsa3072 algorithm   Jamin Lin
• [PATCH v3 1/1] rsa: adds rsa3072 algorithm   Jamin Lin
• [PATCH v2 1/1] doc: printf() codes   Heinrich Schuchardt
• Pull request: u-boot-samsung master   Minkyu Kang
• [PATCH] arm64: zynqmp: Change compatible strings for cadence uart   Michal Simek
• [PATCH] arm64: zynqmp: Update USB node handle from dwc3 to usb   Michal Simek
• [PATCH] arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings   Michal Simek
• [PATCH] arm64: zynqmp: Change firmware dependency   Michal Simek
• [PATCH v2] arm: dts: Aspeed: add Bletchley dts   Potin Lai (賴柏廷)
• [PATCH 0/4] zynqmp: Add support for sending pmufw config object overlay   Michal Simek
• [PATCH] zynqmp: Use the same style for macro definitions   Michal Simek
• [PATCH] arm64: zynqmp: Remove SOM *u-boot.dtsi   Michal Simek
• [PATCH v2] zynqmp: Use the same style for macro definitions   Michal Simek
• [PATCH] power: zynqmp: Add power domain driver for ZynqMP   Michal Simek
• [PATCH v3 01/31] str: Move string tests to the string module   Heinrich Schuchardt
• [PATCH v3 02/31] test: Add tests for trailing_strtol()   Heinrich Schuchardt
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   Heinrich Schuchardt
• [PATCH v3 05/31] dm: core: Rename uclass_get_by_name_len()   Heinrich Schuchardt
• [PATCH v3 06/31] dm: core: Allow finding a uclass device by partial name   Heinrich Schuchardt
• [PATCH v3 09/31] dm: blk: Add a function to return the device type   Heinrich Schuchardt
• [PATCH v3 30/31] bootstd: doc: Add documentation   Heinrich Schuchardt
• [PATCH v3 22/31] bootstd: Add an implementation of EFI boot   Heinrich Schuchardt
• [PATCH v3 24/31] bootstd: Add an implementation of EFI bootmgr   Heinrich Schuchardt
• [PATCH 1/2 v2] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH 2/2 v2] efi_loader: Ignore sha1 on signature verification   Ilias Apalodimas
• [PATCH] lib/crypto: Enable more algorithms in cert verification   AKASHI Takahiro
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH] socfpga: enable EFI partition support for de0-nano-soc   Matthias Brugger
• [PATCH] power: zynqmp: Add power domain driver for ZynqMP   Jerry Van Baren
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [PATCH 1/2] phy: zynqmp: Add support for sata and DP phy initialization   Michal Simek
• [PATCH 2/2] scsi: ceva: Enable PHY and reset support   Michal Simek
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Heinrich Schuchardt
• [PATCH] board: amlogic: vim3: configure serial# from ethaddr   Mattijs Korpershoek
• [PATCH 1/1] doc: printf() codes   Heinrich Schuchardt
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   Simon Glass
• [PATCH v4 01/13] imx: Don't define __ASSEMBLY__ in C files   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 4/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Stefan Roese
• [PATCH] board: amlogic: vim3: configure serial# from ethaddr   Neil Armstrong
• [PATCH] board: amlogic: vim3: configure serial# from ethaddr   Neil Armstrong
• [PATCH] lib/crypto: Enable more algorithms in cert verification   Ilias Apalodimas
• [PATCH v3 00/31] Initial implementation of standard boot   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [PATCH 2/2 v2] efi_loader: Ignore sha1 on signature verification   Ilias Apalodimas
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   Tom Rini
• Pull request: u-boot-samsung master   Tom Rini
• [PATCH v9 01/11] tools: mkeficapsule: output messages to stderr instead of stdout   Heinrich Schuchardt
• FIT image: load secure FPGA   Adrian Fiergolski
• [PATCH v9 03/11] tools: build mkeficapsule with tools-only_defconfig   Heinrich Schuchardt
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [GIT PULL] xilinx patches for v2022.04-rc1   Michal Simek
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Mark Kettenis
• FIT image: load secure FPGA   Jorge Ramirez-Ortiz, Foundries
• FIT image: load secure FPGA   Jorge Ramirez-Ortiz, Foundries
• [PATCH] doc: replace @return by Return:   Heinrich Schuchardt
• FIT image: load secure FPGA   Jorge Ramirez-Ortiz, Foundries
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   Heinrich Schuchardt
• FIT image: load secure FPGA   Oleksandr Suvorov
• [PATCH v3 05/20] arm: K3: Add basic support for J721S2 SoC definition   Suman Anna
• [RFC PATCH v3 0/9] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [RFC PATCH v3 1/9] FWU: Add FWU metadata structure and functions for accessing metadata   Sughosh Ganu
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   Sughosh Ganu
• [RFC PATCH v3 3/9] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
• [RFC PATCH v3 4/9] FWU: STM32MP1: Add support to read boot index from backup register   Sughosh Ganu
• [RFC PATCH v3 5/9] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [RFC PATCH v3 6/9] FWU: Add boot time checks as highlighted by the FWU specification   Sughosh Ganu
• [RFC PATCH v3 7/9] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [RFC PATCH v3 8/9] FWU: cmd: Add a command to read FWU metadata   Sughosh Ganu
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
• [GIT PULL] xilinx patches for v2022.04-rc1   Tom Rini
• [PATCH] MAINTAINERS: Update e-mail in Xen maintainership   Anastasiia Lukianenko
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Alistair Delva
• [PATCH] xilinx: common: change bootm_size to not go beyond ram_top   Ricardo Salveti
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Mark Kettenis
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 4/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH u-boot-dm v4] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Marek Behún
• [RESEND PATCH v3 0/4] arm: kirkwood: Add support for Pogoplug V4   Tony Dinh
• [RESEND PATCH v3 1/4] arm: kirkwood: Pogoplug-V4 : Add DTS files   Tony Dinh
• [RESEND PATCH v3 2/4] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Tony Dinh
• [RESEND PATCH v3 3/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [RESEND PATCH v3 4/4] arm: kirkwood: Pogoplug V4 : Add board include header and defconfig files   Tony Dinh
• [PATCH v8 03/15] rockchip: rk3066: add clock driver for rk3066 soc   Sean Anderson
• [PATCH 14/27] sunxi: implement clock driver for suniv f1c100s   Sean Anderson
• [PATCH v9 03/11] tools: build mkeficapsule with tools-only_defconfig   AKASHI Takahiro
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   AKASHI Takahiro
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   AKASHI Takahiro
• [RFC PATCH v3 5/9] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [RFC PATCH v3 0/9] FWU: Add support for FWU Multi Bank Update feature   AKASHI Takahiro
• [RFC PATCH v3 1/9] FWU: Add FWU metadata structure and functions for accessing metadata   Masami Hiramatsu
• [PATCH v9 01/11] tools: mkeficapsule: output messages to stderr instead of stdout   AKASHI Takahiro
• [PATCH] MAINTAINERS: Update e-mail in Xen maintainership   Oleksandr Andrushchenko
• [RFC PATCH v3 1/9] FWU: Add FWU metadata structure and functions for accessing metadata   Masami Hiramatsu
• [RFC PATCH v3 7/9] FWU: Add support for FWU Multi Bank Update feature   Masami Hiramatsu
• [PATCH] configs: stm32mp15: Enable OF_BOARD flag   Patrice Chotard
• Pull request doc-2022-04-rc1   Heinrich Schuchardt
• [PATCH v2] power: zynqmp: Add power domain driver for ZynqMP   Michal Simek
• [PATCH] xilinx: common: change bootm_size to not go beyond ram_top   Michal Simek
• [PATCH 1/3] net: xilinx: fix load access fault   Andy Chiu
• [PATCH 2/3] net: xilinx: Move setup of 1G MAC to a function   Andy Chiu
• [PATCH 3/3] net: xilinx: Force a probe failure if it cannot setup phy   Andy Chiu
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Michael Walle
• [PATCH v3 00/31] Initial implementation of standard boot   Michael Walle
• [PATCH] net: xilinx: fix the wrong dma base address issue   Andy Chiu
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   Masami Hiramatsu
• [PULL u-boot] Please pull u-boot-amlogic-20220120   Neil Armstrong
• [RFC PATCH v3 0/9] FWU: Add support for FWU Multi Bank Update feature   Heinrich Schuchardt
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Mark Kettenis
• [RFC PATCH v3 3/9] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Heinrich Schuchardt
• [PATCH] cmd: mmc: Consider GP partitions in mmc hwpartition user enh start -   Fabio Estevam
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   Heinrich Schuchardt
• UDC driver implementation   Oleh Kravchenko
• [RESEND PATCH v3 4/4] arm: kirkwood: Pogoplug V4 : Add board include header and defconfig files   Stefan Roese
• [RFC PATCH v3 1/9] FWU: Add FWU metadata structure and functions for accessing metadata   Heinrich Schuchardt
• [RFC PATCH v3 4/9] FWU: STM32MP1: Add support to read boot index from backup register   Heinrich Schuchardt
• [RFC PATCH v3 8/9] FWU: cmd: Add a command to read FWU metadata   Heinrich Schuchardt
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Jagan Teki
• [PATCH v11] driver: spi: add bcm iproc qspi support   Jagan Teki
• [PATCH v4 0/3] mtd: Support slc-mode for NTC CHIP   Jagan Teki
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Michael Walle
• [PATCH 7/7] sunxi: H6: Enable SPI0 in DT when no eMMC is used   Jagan Teki
• [PATCH 1/1] drivers: octeon: get rid of Unicode in code   Stefan Roese
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Pali Rohár
• Commit 4f2e2280862a ("RFC: arm: pci: Add PCI cam support to PCI-E ecam driver")   Pali Rohár
• [PATCH] mxc_gpio: on imx8m read the DR instead of the PSR   Angus Ainslie
• [PATCH] mxc_gpio: on imx8m read the DR instead of the PSR   Fabio Estevam
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH 7/7] sunxi: H6: Enable SPI0 in DT when no eMMC is used   Andre Przywara
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Tudor.Ambarus at microchip.com
• [PATCH 7/7] sunxi: H6: Enable SPI0 in DT when no eMMC is used   Jagan Teki
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Jagan Teki
• [PATCH v9 03/11] tools: build mkeficapsule with tools-only_defconfig   Tom Rini
• [RFC PATCH 00/14] FWU: Add FWU Multi Bank Update for DeveloerBox   Masami Hiramatsu
• [RFC PATCH 01/14] DFU: Do not copy the entity name over the buffer size   Masami Hiramatsu
• [RFC PATCH 02/14] DFU: Accept redundant spaces and tabs in dfu_alt_info   Masami Hiramatsu
• [RFC PATCH 03/14] DFU: Check the number of arguments and argument string strictly   Masami Hiramatsu
• [RFC PATCH 04/14] doc: usage: DFU: Fix dfu_alt_info document   Masami Hiramatsu
• [RFC PATCH 05/14] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB   Masami Hiramatsu
• [RFC PATCH 06/14] FWU: Calculate CRC32 in gpt_update_mdata()   Masami Hiramatsu
• [RFC PATCH 07/14] FWU: Free metadata copy if gpt_get_mdata() failed   Masami Hiramatsu
• [RFC PATCH 08/14] FWU: Move FWU metadata operation code in fwu_mdata.c   Masami Hiramatsu
• [RFC PATCH 09/14] synquacer: Update for TBBR based new FIP layout   Masami Hiramatsu
• [RFC PATCH 10/14] FWU: Reboot soon after successfully install the new firmware   Masami Hiramatsu
• [RFC PATCH 11/14] FWU: Add FWU Multi Bank Update on SPI Flash   Masami Hiramatsu
• [RFC PATCH 12/14] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Masami Hiramatsu
• [RFC PATCH 13/14] FWU: synquacer: Initialize broken metadata   Masami Hiramatsu
• [RFC PATCH 14/14] configs: synquacer: Add FWU support for DeveloperBox   Masami Hiramatsu
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Tudor.Ambarus at microchip.com
• [PATCH u-boot-dm v4] fdt_support: Add fdt_for_each_node_by_compatible() helper macro   Stefan Roese
• [PATCH u-boot-marvell v2] arm: mvebu: turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob   Stefan Roese
• [PATCH] pci: pci_mvebu: Add support for Kirkwood PCIe controllers   Stefan Roese
• [PATCH] xilinx: common: change bootm_size to not go beyond ram_top   Ricardo Salveti
• [PATCH u-boot-marvell v4 0/9] More verifications for kwbimage in SPL   Stefan Roese
• [PATCH 1/1] drivers: octeon: get rid of Unicode in code   Stefan Roese
• [PATCH 0/2] arm: mvebu: Remove comphy_update_map()   Stefan Roese
• [PATCH] arm: a37xx: Disable CONFIG_DEBUG_UART_ANNOUNCE   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• Pull request doc-2022-04-rc1   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20220120   Tom Rini
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Chris Morgan
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 00/31] Initial implementation of standard boot   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [PATCH 00/11] Add support for SUNIV and F1C100s.   Jesse Taube
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH 1/1] efi_loader: correct function comment style   Heinrich Schuchardt
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Mark Kettenis
• [PATCH v9 04/11] tools: mkeficapsule: add firmware image signing   Heinrich Schuchardt
• [PATCH v2] xilinx: common: change bootm_size to not go beyond ram_top   Ricardo Salveti
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [RESEND PATCH v3 4/4] arm: kirkwood: Pogoplug V4 : Add board include header and defconfig files   Tony Dinh
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Dhananjay Phadke
• [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode   Ramon Fried
• [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode   Tom Rini
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [RFC PATCH 10/14] FWU: Reboot soon after successfully install the new firmware   AKASHI Takahiro
• [PATCH v4 0/4] arm: kirkwood: Add support for Pogoplug V4   Tony Dinh
• [PATCH v4 1/4] arm: kirkwood: Pogoplug-V4 : Add DTS files   Tony Dinh
• [PATCH v4 2/4] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Tony Dinh
• [PATCH v4 3/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH v4 4/4] arm: kirkwood: Pogoplug V4 : Add board include header and defconfig files   Tony Dinh
• [PATCH 01/11] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code   Andre Przywara
• [PATCH 03/11] dt-bindings: clock: Add initial suniv headers   Andre Przywara
• [PATCH 04/11] dt-bindings: reset: Add initial suniv headers   Andre Przywara
• [PATCH 07/11] sunxi: board: Add support for SUNIV   Andre Przywara
• [PATCH 10/11] ARM: dts: suniv: Add device tree files for F1C100s   Andre Przywara
• [PATCH v2 00/38] binman: Add support for bintools and missing tools   Simon Glass
• [PATCH 10/11] ARM: dts: suniv: Add device tree files for F1C100s   Jesse Taube
• [RFC PATCH 11/14] FWU: Add FWU Multi Bank Update on SPI Flash   AKASHI Takahiro
• [RFC PATCH 12/14] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   AKASHI Takahiro
• [PATCH 02/11] arm: arm926ej-s: add sunxi code   Andre Przywara
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH 02/11] arm: arm926ej-s: add sunxi code   Jesse Taube
• [PATCH v3 0/4] rockchip: sdhci: Fix reinit and add HS400 Enhanced Strobe support   Simon Glass
• [PATCH v3] gitlab: x86: Add a coreboot test   Simon Glass
• [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode   Vignesh Raghavendra
• [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Vignesh Raghavendra
• [PATCH 2/8] net: ti: am65-cpsw: Add support for multi port independent MAC mode   Vignesh Raghavendra
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Tudor.Ambarus at microchip.com
• [RFC PATCH 10/14] FWU: Reboot soon after successfully install the new firmware   Masami Hiramatsu
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Tudor.Ambarus at microchip.com
• [RFC PATCH 12/14] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox   Masami Hiramatsu
• [RFC PATCH 11/14] FWU: Add FWU Multi Bank Update on SPI Flash   Masami Hiramatsu
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
• [RFC PATCH 10/14] FWU: Reboot soon after successfully install the new firmware   Masami Hiramatsu
• [RFC PATCH v3 5/9] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [RFC PATCH 10/14] FWU: Reboot soon after successfully install the new firmware   AKASHI Takahiro
• [RFC PATCH v3 0/9] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [PATCH 6/8] configs: am64x_evm: set eth1 as boot interface   Vignesh Raghavendra
• [RFC PATCH v3 0/9] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [RFC PATCH v3 7/9] FWU: Add support for FWU Multi Bank Update feature   Sughosh Ganu
• [PATCH 0/4] ARM: ti: AM64x: Clean up Ethernet boot support on AM64x SK   Vignesh Raghavendra
• [PATCH 1/4] net: ti: am65-cpsw-nuss: Fix err msg for port bind failures   Vignesh Raghavendra
• [PATCH 2/4] ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL   Vignesh Raghavendra
• [PATCH 3/4] configs: am64xx_evm: Increase BSS max size to 16K   Vignesh Raghavendra
• [PATCH 4/4] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Vignesh Raghavendra
• [PATCH] stm32prog: add partition name in treat_partition_list error messages   Patrice CHOTARD
• [PATCH v2] xilinx: common: change bootm_size to not go beyond ram_top   Michal Simek
• [PATCH v3 4/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH] configs: stm32mp15: Enable OF_BOARD flag   Patrick DELAUNAY
• [PATCH 1/1] stm32mp: fix board_get_alt_info_mmc()   Patrick DELAUNAY
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Mark Kettenis
• [PATCH v4 3/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Pali Rohár
• [RFC PATCH v3 3/9] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
• [PATCH v3 0/4] rockchip: sdhci: Fix reinit and add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   Sughosh Ganu
• [PATCH] arm: mvebu: Espressobin: Fix URLs in comments   Pali Rohár
• [RFC PATCH v3 3/9] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Ilias Apalodimas
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   Ilias Apalodimas
• [RFC PATCH v3 6/9] FWU: Add boot time checks as highlighted by the FWU specification   Ilias Apalodimas
• [PATCH v2 0/2] sunxi: Add option to prevent boot on plug-in   Andre Przywara
• [PATCH v2 1/2] pmic: axp: define ALDO_IN startup bit   Andre Przywara
• [PATCH v2 2/2] sunxi: Add option to prevent booting on power plug-in   Andre Przywara
• [PATCH v3] gitlab: x86: Add a coreboot test   Tom Rini
• [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Tom Rini
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Tom Rini
• [PATCH 1/1] sandbox: sandbox_serial_pending depends on DM_VIDEO   Heinrich Schuchardt
• [PATCH v3 30/31] bootstd: doc: Add documentation   Tom Rini
• [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Vignesh Raghavendra
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH v2 1/4] mmc: sdhci: Add HS400 Enhanced Strobe support   Simon Glass
• [PATCH v2 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Simon Glass
• [PATCH 2/2] tools/fitimage: make sure dumpimage still works when "@" are detected   Simon Glass
• [PATCH 1/2] tools/fitimage: remove redundant format check   Simon Glass
• [PATCH] spi: Add spi_get_bus_and_cs() new use_dt param   Simon Glass
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Simon Glass
• [PATCH] scripts: setlocalversion: remove quotes around localversion from config   Simon Glass
• [PATCH 1/8] lib: compile uuid_guid_get_str if CONFIG_LIB_UUID=y   Simon Glass
• [PATCH 3/8] disk: simplify part_print_efi()   Simon Glass
• [PATCH 4/8] sandbox: imply PARTITION_TYPE_GUID   Simon Glass
• [PATCH 5/8] test: add test for %pUs   Simon Glass
• [PATCH 7/8] efi_loader: user %pUs for printing GUIDs   Simon Glass
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   Simon Glass
• [PATCH v1] serial: npcm: Add support for Nuvoton NPCM SoCs   Simon Glass
• [resent][PATCH 1/3] image-fit: Make string of algo parameter constant   Simon Glass
• [resent][PATCH 2/3] mkimage: Drop unused OPT_STRING constant   Simon Glass
• [resent][PATCH 3/3] mkimage: Allow to specify the signature algorithm on the command line   Simon Glass
• [PATCH 8/8] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Tom Rini
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 31/31] RFC: Switch rpi over to use bootstd   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Tom Rini
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   Heinrich Schuchardt
• [PATCH v3 30/31] bootstd: doc: Add documentation   Mark Kettenis
• [PATCH v2 2/2] sunxi: Add option to prevent booting on power plug-in   Chris Morgan
• [PATCH] vexpress64: semi_defconfig: disable CRC32 support   Andre Przywara
• [PATCH v2 2/2] sunxi: Add option to prevent booting on power plug-in   Andre Przywara
• [PATCH] vexpress64: semi_defconfig: disable CRC32 support   Marek Vasut
• [PATCH 1/1] sandbox: sandbox_serial_pending depends on DM_VIDEO   Simon Glass
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH v3] gitlab: x86: Add a coreboot test   Simon Glass
• [PATCH] net: xilinx: fix the wrong dma base address issue   Michal Simek
• [PATCH] sandbox: fix build failure with musl and SDL   Heinrich Schuchardt
• [PATCH 1/1] sandbox: eth-raw: fix building with musl library   Heinrich Schuchardt
• [PATCH v4] gitlab/azure: x86: Add a coreboot test   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Tom Rini
• [PATCH v4] gitlab/azure: x86: Add a coreboot test   Tom Rini
• [PATCH v3 30/31] bootstd: doc: Add documentation   Mark Kettenis
• [PATCH v3 30/31] bootstd: doc: Add documentation   Tom Rini
• [PATCH v2 1/5] Convert CONFIG_KEEP_SERVERADDR to Kconfig   Tom Rini
• [PATCH v2 2/5] Convert CONFIG_UDP_CHECKSUM to Kconfig   Tom Rini
• [PATCH v2 3/5] Convert CONFIG_TIMESTAMP to Kconfig   Tom Rini
• [PATCH v2 4/5] Convert CONFIG_BOOTP_SERVERIP to Kconfig   Tom Rini
• [PATCH v2 5/5] net: Drop #ifdefs with CONFIG_BOOTP_SERVERIP   Tom Rini
• [PATCH] spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig   Tom Rini
• [PATCH v1 1/5] cmd: Fix up warnings in flash.c   Tom Rini
• [PATCH v1 2/5] mtd: cfi: introduce CFI_FLASH_BANKS   Tom Rini
• [PATCH v1 3/5] mtd: cfi: change CONFIG_SYS_MAX_FLASH_BANKS_DETECT as boolean   Tom Rini
• [PATCH v1 4/5] configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig   Tom Rini
• [PATCH v1 5/5] Convert CONFIG_AT91_EFLASH to Kconfig   Tom Rini
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Tom Rini
• [u-boot-test-hooks PATCH v2] travis-ci: Add tests for booting from coreboot   Tom Rini
• [PATCH] sandbox: fix build failure with musl and SDL   Milan P. Stanić
• [PATCH 1/1] sandbox: eth-raw: fix building with musl library   Milan P. Stanić
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH V2] phy: nop-phy: Enable reset-gpios support   Tom Rini
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Tom Rini
• [PATCH v4 3/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH v3 30/31] bootstd: doc: Add documentation   Tom Rini
• [PATCH v3 30/31] bootstd: doc: Add documentation   Heinrich Schuchardt
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH v3 30/31] bootstd: doc: Add documentation   Simon Glass
• [PATCH 1/3] efi: Add debugging to efi_set_bootdev()   Simon Glass
• [PATCH 2/3] efi: Use device_get_uclass_id() where appropriate   Simon Glass
• [PATCH 3/3] efi: Drop unnecessary calls to blk_find_device()   Simon Glass
• [PATCH v4 0/4] Fix compiler warnings for 32-bit ARM   Simon Glass
• [PATCH v4 1/4] checkpatch: Support wide strings   Simon Glass
• [PATCH v4 2/4] efi: Use 16-bit unicode strings   Simon Glass
• [PATCH v4 3/4] sandbox: Detect the host bit size automatically   Simon Glass
• [PATCH v4 4/4] treewide: Use 16-bit unicode strings   Simon Glass
• [PATCH 1/8] nvme: Split out PCI support   Simon Glass
• [PATCH 2/8] mailbox: apple: Add driver for Apple IOP mailbox   Simon Glass
• [PATCH 3/8] arm: apple: Add RTKit support   Simon Glass
• [PATCH 4/8] nvme: Introduce driver ops   Simon Glass
• [PATCH 5/8] nvme: Add shutdown function   Simon Glass
• [PATCH 6/8] power: domain: apple: Add reset support   Simon Glass
• [PATCH 7/8] nvme: apple: Add driver for Apple NVMe storage controller   Simon Glass
• [PATCH 1/2] spi: apple: Add driver for Apple SPI controller   Simon Glass
• [PATCH 2/2] input: apple: Add support for Apple SPI keyboard   Simon Glass
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Pali Rohár
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Tom Rini
• [PATCH v3 30/31] bootstd: doc: Add documentation   Mark Kettenis
• [PATCH 0/1] dm: serial: Remove old drivers and add migration deadline   Simon Glass
• [PATCH 1/1] dm: serial: Add a migration deadline for serial   Simon Glass
• [PATCH v5 00/13] kconfig: Add some new macros   Simon Glass
• [PATCH v5 01/13] imx: Don't define __ASSEMBLY__ in source files   Simon Glass
• [PATCH v5 02/13] mips: Avoid using config_enabled() directly   Simon Glass
• [PATCH v5 03/13] mmc: fsl: Use brackets around if()   Simon Glass
• [PATCH v5 04/13] kconfig: Update IS_ENABLED() internals   Simon Glass
• [PATCH v5 05/13] kconfig: Add support for conditional values   Simon Glass
• [PATCH v5 06/13] bloblist: Update to use conditional value   Simon Glass
• [PATCH v5 07/13] patman: Update test_util to run doc tests   Simon Glass
• [PATCH v5 08/13] buildman: Add a flag to control the traceback   Simon Glass
• [PATCH v5 09/13] buildman: Make use of test_util   Simon Glass
• [PATCH v5 10/13] buildman: Add helper functions for updating .config files   Simon Glass
• [PATCH v5 11/13] buildman: Provide a hint on how to debug thread crashes   Simon Glass
• [PATCH v5 12/13] buildman: Allow adjusting board config on the fly   Simon Glass
• [PATCH v5 13/13] test: Add some tests for kconfig.h   Simon Glass
• [PATCH 1/8] nvme: Split out PCI support   Mark Kettenis
• [PATCH 0/3] ide: Convert some options to Kconfig   Simon Glass
• [PATCH 1/3] ide: Drop CONFIG_IDE_AHB   Simon Glass
• [PATCH 2/3] Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig   Simon Glass
• [PATCH 3/3] Drop CONFIG_SYS_PIO_MODE   Simon Glass
• Mediatek MT8183 build instructions   Simon Glass
• [PATCH 1/8] nvme: Split out PCI support   Simon Glass
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Pali Rohár
• [PATCH 4/8] nvme: Introduce driver ops   Mark Kettenis
• [PATCH 2/8] mailbox: apple: Add driver for Apple IOP mailbox   Mark Kettenis
• [PATCH 3/8] arm: apple: Add RTKit support   Mark Kettenis
• [PATCH 6/8] power: domain: apple: Add reset support   Mark Kettenis
• [PATCH 7/8] nvme: apple: Add driver for Apple NVMe storage controller   Mark Kettenis
• [PATCH 1/8] nvme: Split out PCI support   Mark Kettenis
• [PATCH v2] Allow colon in PXE bootfile URLs   Lyle Franklin
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Tom Rini
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Pali Rohár
• [PATCH 1/2] spi: apple: Add driver for Apple SPI controller   Mark Kettenis
• [PATCH 2/2] input: apple: Add support for Apple SPI keyboard   Mark Kettenis
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Pali Rohár
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Pali Rohár
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Tom Rini
• [PATCH 2/8] mailbox: apple: Add driver for Apple IOP mailbox   Simon Glass
• [PATCH 7/8] nvme: apple: Add driver for Apple NVMe storage controller   Simon Glass
• [PATCH 6/8] power: domain: apple: Add reset support   Simon Glass
• [PATCH 4/8] nvme: Introduce driver ops   Simon Glass
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Simon Glass
• [PATCH 3/8] arm: apple: Add RTKit support   Simon Glass
• [PATCH 7/8] nvme: apple: Add driver for Apple NVMe storage controller   Mark Kettenis
• [PATCH V2] phy: nop-phy: Enable reset-gpios support   Adam Ford
• [PATCH] arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI   Adam Ford
• [PATCH V3] phy: nop-phy: Enable reset-gpios support   Adam Ford
• [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1   Adam Ford
• [PATCH V2 2/2] imx: imx8mm_beacon: Enable USB   Adam Ford
• [PATCH 7/8] nvme: apple: Add driver for Apple NVMe storage controller   Simon Glass
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Tom Rini
• [PATCH 3/8] arm: apple: Add RTKit support   Mark Kettenis
• [PATCH 6/8] power: domain: apple: Add reset support   Mark Kettenis
• [PATCH v2 0/9] Apple M1 NVMe storage support   Mark Kettenis
• [PATCH v2 1/9] nvme: Split out PCI support   Mark Kettenis
• [PATCH v2 2/9] mailbox: apple: Add driver for Apple IOP mailbox   Mark Kettenis
• [PATCH v2 3/9] arm: apple: Change SoC name from "m1" into "apple"   Mark Kettenis
• [PATCH v2 4/9] arm: apple: Add RTKit support   Mark Kettenis
• [PATCH v2 5/9] nvme: Introduce driver ops   Mark Kettenis
• [PATCH v2 6/9] nvme: Add shutdown function   Mark Kettenis
• [PATCH v2 7/9] power: domain: apple: Add reset support   Mark Kettenis
• [PATCH v2 8/9] nvme: apple: Add driver for Apple NVMe storage controller   Mark Kettenis
• [PATCH v2 9/9] configs: apple: Add NVMe boot target   Mark Kettenis
• [PATCH 1/3] arm: dts: imx8mn-beacon: Resync dtsi with Kernel 5.17-rc1   Adam Ford
• [PATCH 2/3] imx: imx8mn_beacon: Enable USB   Adam Ford
• [PATCH 3/3] configs: imx8mn_beacon_2g_defconfig: Sync with standard model   Adam Ford
• [PATCH 2/3] imx: imx8mn_beacon: Enable USB   Fabio Estevam
• [PATCH 1/3] arm: dts: imx8mn-beacon: Resync dtsi with Kernel 5.17-rc1   Fabio Estevam
• [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1   Fabio Estevam
• Pull request for efi-2022-04-rc1-2   Heinrich Schuchardt
• [PATCH V2 2/2] imx: imx8mm_beacon: Enable USB   Fabio Estevam
• [PATCH V2 2/2] imx: imx8mm_beacon: Enable USB   Adam Ford
• [PATCH v2 1/2] cmd: source: Use script from default config   Sven Schwermer
• CONFIG_SYS_SPL_ARGS_ADDR   Sven Schwermer
• [PATCH V2] imx8mm_beacon/imx8mn_beacon: Update build instructions   Adam Ford
• [PATCH V2] imx8mm_beacon/imx8mn_beacon: Update build instructions   Fabio Estevam
• [PATCH] arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI   Marek Vasut
• [PATCH v2 3/9] arm: apple: Change SoC name from "m1" into "apple"   Simon Glass
• [PATCH 00/40] RFC: rpi: Enable ACPI booting on ARM with Raspberry Pi 4   Simon Glass
• [PATCH] arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI   Adam Ford
• [PATCH v4 3/4] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH] arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v5 25/29] image: Remove #ifdefs from select_ramdisk()   Art Nikpal
• [PATCH v2] image-board: fix wrong implementation ram disk address setup from cmdline   Art Nikpal
• [PATCH] arm: mvebu: Espressobin: Fix URLs in comments   Stefan Roese
• [PATCH 1/3] ide: Drop CONFIG_IDE_AHB   Stefan Roese
• [PATCH 2/3] Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig   Stefan Roese
• [PATCH 3/3] Drop CONFIG_SYS_PIO_MODE   Stefan Roese
• [PATCH 00/14] video: Drop old CFB code   Simon Glass
• [PATCH 01/14] video: Drop cfg_console   Simon Glass
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Simon Glass
• [PATCH 03/14] video: siemens: Drop unused video code   Simon Glass
• [PATCH 04/14] video: nexell: Drop unused and invalid code   Simon Glass
• [PATCH 05/14] video: Drop video_fb header   Simon Glass
• [PATCH 06/14] video: Drop CONFIG_VIDEO_BMP_LOGO   Simon Glass
• [PATCH 07/14] video: Drop references to CONFIG_VIDEO et al   Simon Glass
• [PATCH 08/14] video: Clean up the uclass header   Simon Glass
• [PATCH 09/14] video: Drop da8xx-fb   Simon Glass
• [PATCH 10/14] video: fsl: colibri_vf: Drop FSL DCU driver   Simon Glass
• [PATCH 11/14] video: Drop FSL DIU driver   Simon Glass
• [PATCH 12/14] video: mxs: Drop old video code   Simon Glass
• [PATCH 13/14] video: Convert CONFIG_VIDEO_BCM2835 to Kconfig   Simon Glass
• [PATCH 14/14] video: Drop formike driver   Simon Glass
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Pali Rohár
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Simon Glass
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Pali Rohár
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Tom Rini
• [PATCH v4 1/4] checkpatch: Support wide strings   Tom Rini
• Pull request for efi-2022-04-rc1-2   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Pali Rohár
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Pali Rohár
• [PATCH v2 0/2] Apple M1 laptop keyboard support   Mark Kettenis
• [PATCH v2 1/2] spi: apple: Add driver for Apple SPI controller   Mark Kettenis
• [PATCH v2 2/2] input: apple: Add support for Apple SPI keyboard   Mark Kettenis
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Simon Glass
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Pali Rohár
• [PATCH v4 1/4] checkpatch: Support wide strings   Simon Glass
• [PATCH v4 1/4] checkpatch: Support wide strings   Tom Rini
• [PATCH v4 1/4] checkpatch: Support wide strings   Joe Perches
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Tom Rini
• [PATCH v4 1/4] checkpatch: Support wide strings   Tom Rini
• [PATCH v4 1/4] checkpatch: Support wide strings   Joe Perches
• [PATCH v5 0/4] Fix compiler warnings for 32-bit ARM   Simon Glass
• [PATCH v5 1/4] scripts/checkpatch.pl: Resync with v5.16   Simon Glass
• [PATCH v5 2/4] efi: Use 16-bit unicode strings   Simon Glass
• [PATCH v5 3/4] sandbox: Detect the host bit size automatically   Simon Glass
• [PATCH v5 4/4] treewide: Use 16-bit unicode strings   Simon Glass
• [PATCH] binman: Document the __bss_size symbol error   Simon Glass
• [PATCH v4 1/4] checkpatch: Support wide strings   Simon Glass
• [PATCH 02/14] video: nokia_rx51: Drop obsolete video code   Simon Glass
• [PATCH 35/40] acpi: Add myself as maintainer   Simon Glass
• [PATCH 33/40] doc: Add usage information for the acpi command   Simon Glass
• [PATCH 34/40] acpi: Add some tables needed by ARM devices   Simon Glass
• [PATCH 32/40] acpi: Tidy up the table list   Simon Glass
• [PATCH 31/40] acpi: Tidy up the item list   Simon Glass
• [PATCH 29/40] x86: Move acpi_get_rsdp_addr() ACPI tables to the writer   Simon Glass
• [PATCH 30/40] acpi: Collect tables in the acpi_item list   Simon Glass
• [PATCH 28/40] x86: Move device-specific ACPI tables to a writer function   Simon Glass
• [PATCH 26/40] x86: Move CSRT table to a writer function   Simon Glass
• [PATCH 27/40] x86: acpi: Update acpi_fill_csrt() to use acpi_ctx   Simon Glass
• [PATCH 24/40] x86: Move MADT table to a writer function   Simon Glass
• [PATCH 25/40] x86: Move TCPA table to a writer function   Simon Glass
• [PATCH 23/40] x86: Move TPM2 table to a writer function   Simon Glass
• [PATCH 22/40] x86: Move SSDT table to a writer function   Simon Glass
• [PATCH 21/40] x86: Move FACP table into separate functions   Simon Glass
• [PATCH 20/40] x86: Move FADT table to a writer function   Simon Glass
• [PATCH 19/40] x86: Move GNVS table to a writer function   Simon Glass
• [PATCH 17/40] x86: Move FACS table to a writer function   Simon Glass
• [PATCH 18/40] x86: Move DSDT table to a writer function   Simon Glass
• [PATCH 16/40] x86: Move base tables to a writer function   Simon Glass
• [PATCH 15/40] x86: Use the ACPI table writer   Simon Glass
• [PATCH 14/40] x86: acpi: Split out context creation from base tables   Simon Glass
• [PATCH 13/40] acpi: Add a linker list for ACPI tables   Simon Glass
• [PATCH 12/40] acpi: Add a table start   Simon Glass
• [PATCH 10/40] acpi: Allow include files within the board directory   Simon Glass
• [PATCH 11/40] acpi: Move acpi_fill_header() to the generic header   Simon Glass
• [PATCH 08/40] efi: Correct address handling with ACPI tables   Simon Glass
• [PATCH 07/40] efi: Correct call to write_acpi_tables()   Simon Glass
• [PATCH 05/40] x86: Tidy up use of CONFIG_ACPIGEN   Simon Glass
• [PATCH 04/40] arm: Allow supporting ACPI-table generation   Simon Glass
• [PATCH 06/40] sandbox: Allow building with GENERATE_ACPI_TABLE   Simon Glass
• [PATCH 03/40] x86: Move the acpi table to generic global_data   Simon Glass
• [PATCH 02/40] x86: Allow any arch to generate ACPI tables   Simon Glass
• [PATCH 02/11] arm: arm926ej-s: add sunxi code   Andre Przywara
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   AKASHI Takahiro
• [RFC PATCH v3 5/9] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [RFC PATCH v3 3/9] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Masami Hiramatsu
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   Masami Hiramatsu
• [PATCH v2 1/1] serial: npcm: Add support for Nuvoton NPCM SoCs   Stanley Chu
• [PATCH v5 0/3] arm: kirkwood: Add support for Pogoplug V4   Tony Dinh
• [PATCH v5 1/3] arm: kirkwood: Pogoplug-V4 : Add DTS files   Tony Dinh
• [PATCH v5 2/3] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Tony Dinh
• [PATCH v5 3/3] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [RFC PATCH v3 5/9] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Sughosh Ganu
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   Sughosh Ganu
• [RFC PATCH v3 1/9] FWU: Add FWU metadata structure and functions for accessing metadata   Sughosh Ganu
• [RFC PATCH v3 1/9] FWU: Add FWU metadata structure and functions for accessing metadata   Sughosh Ganu
• [PATCH] binman: doc: fix typo for u-boot-tpl   Heiko Thiery
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   Masami Hiramatsu
• [RFC PATCH v3 3/9] FWU: stm32mp1: Add helper functions for accessing FWU metadata   Sughosh Ganu
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   AKASHI Takahiro
• [RFC PATCH v3 2/9] FWU: Add FWU metadata access functions for GPT partitioned block devices   AKASHI Takahiro
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   Heinrich Schuchardt
• [PATCH] net: xilinx: fix the wrong dma base address issue   Michal Simek
• [PATCH v2] image-board: fix wrong implementation ram disk address setup from cmdline   Neil Armstrong
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Merlijn Wajer
• [PATCH v5 3/3] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Stefan Roese
• [PATCH v5 2/3] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Stefan Roese
• [PATCH v5 1/3] arm: kirkwood: Pogoplug-V4 : Add DTS files   Pali Rohár
• [PATCH v5 2/3] arm: kirkwood: Pogoplug-V4 : Add Kconfig files   Pali Rohár
• [PATCH v5 3/3] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Pali Rohár
• [PATCH v5 3/3] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Rasmus Villemoes
• [PATCH 13/14] video: Convert CONFIG_VIDEO_BCM2835 to Kconfig   Matthias Brugger
• [PATCH 1/2] arm: stm32mp: Fix USB boot device report   Patrice CHOTARD
• [PATCH 2/2] ARM: dts: stm32: Add DFU support for DHCOR recovery   Patrice CHOTARD
• [PATCH 1/2] stm32mp: remove the bootcount activation   Patrice CHOTARD
• [PATCH 2/2] stm32mp: correct the dependency for bootcount configs   Patrice CHOTARD
• [PATCH 1/1] stm32mp: fix board_get_alt_info_mmc()   Patrice CHOTARD
• [PATCH] arm: dts: stm32mp15: alignment with v5.16   Patrice CHOTARD
• [PATCH 1/2] ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12   Patrice CHOTARD
• [PATCH 2/2] ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12   Patrice CHOTARD
• [PATCH 2/2] ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12   Patrice CHOTARD
• [PATCH] board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivated   Patrice CHOTARD
• [PATCH] stm32prog: add partition name in treat_partition_list error messages   Patrice CHOTARD
• [PATCH] configs: stm32mp15: Enable OF_BOARD flag   Patrice CHOTARD
• [PULL] Pull request for u-boot/master v2024.01 = u-boot-stm32-20220124   Patrice CHOTARD
• [PATCH] clk: ccf: correct the test on the parent uclass in clk_enable/clk_disable   Patrick Delaunay
• [PATCH 00/16] tools: Add support for signing devicetree blobs   Simon Glass
• [PATCH] usb: xhci: reset endpoint on USB stall   Stefan Agner
• [PATCH 17/23] video: Convert CONFIG_VIDEO_LOGO to Kconfig   Tom Rini
• [PATCH] imx: imx8mn_beacon: Enable TrustZone   Adam Ford
• [PULL] Pull request for u-boot/master v2024.01 = u-boot-stm32-20220124   Tom Rini
• [RFC PATCH] efi_loader: clean up uefi secure boot image verification logic   Ilias Apalodimas
• [RFC PATCH] dts: automatically build necessary .dtb files   Tom Rini
• [PATCH 1/2] tools/fitimage: remove redundant format check   Tom Rini
• [PATCH 2/2] tools/fitimage: make sure dumpimage still works when "@" are detected   Tom Rini
• [resent][PATCH 1/3] image-fit: Make string of algo parameter constant   Tom Rini
• [resent][PATCH 2/3] mkimage: Drop unused OPT_STRING constant   Tom Rini
• [resent][PATCH 3/3] mkimage: Allow to specify the signature algorithm on the command line   Tom Rini
• [PATCH 1/1] mkimage: struct stat.st_size may not be long   Tom Rini
• [PATCH] misc: mark write buffer const   Tom Rini
• [PATCH v2] cmd: Add Kconfig option for multiprocessor cmds   Tom Rini
• [PATCH] MAINTAINERS: Update e-mail in Xen maintainership   Tom Rini
• [PATCH] vexpress64: semi_defconfig: disable CRC32 support   Tom Rini
• [PATCH 2/7] sunxi: Kconfig: Fix up SPI configuration   Andre Przywara
• [PATCH] armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code   Andre Przywara
• [RFC PATCH] efi_loader: clean up uefi secure boot image verification logic   Heinrich Schuchardt
• [PATCH] binman: doc: fix typo for u-boot-tpl   Simon Glass
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Simon Glass
• [PATCH v2 1/1] serial: npcm: Add support for Nuvoton NPCM SoCs   Simon Glass
• [RFC PATCH] dts: automatically build necessary .dtb files   Simon Glass
• [PATCH] armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code   Michael Walle
• [PATCH v2 1/2] cmd: source: Use script from default config   Tom Rini
• [RESEND PATCH 1/3] Nokia RX-51: Update documentation about ext2/3/4   Pali Rohár
• [RESEND PATCH 2/3] Nokia RX-51: Update documentation about flashing   Pali Rohár
• [RESEND PATCH 3/3] Nokia RX-51: Convert documentation to rst format   Pali Rohár
• [PATCH v2 1/2] cmd: source: Use script from default config   Sven Schwermer
• [PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Christoph Fritz
• [PATCH] imx8m: lock id_swap_bypass bit in tzc380 enable   Andrey Zhizhikin
• [PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Fabio Estevam
• [PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Fabio Estevam
• [PATCH] scripts: setlocalversion: remove quotes around localversion from config   Tom Rini
• [RFC PATCH] dts: automatically build necessary .dtb files   Rasmus Villemoes
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Rasmus Villemoes
• [PATCH V2] mkimage: fix segfault on MacOS arm64   Sergey V. Lobanov
• [PATCH V2] mkimage: fix segfault on MacOS arm64   Jessica Clarke
• [PATCH v3] mkimage: fix segfault on MacOS arm64   Sergey V. Lobanov
• [PATCH V2] mkimage: fix segfault on MacOS arm64   Sergey V. Lobanov
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Simon Glass
• [PATCH 6/8] cmd: efidebug: simplify printing GUIDs   AKASHI Takahiro
• [PATCH v4 1/4] checkpatch: Support wide strings   Joe Perches
• [PATCH v5 3/3] arm: kirkwood: Pogoplug-V4 : Add board implementation files   Tony Dinh
• [PATCH 1/3] serial: Add RISC-V HTIF console driver   Rick Chen
• [PATCH 0/5] sunxi: remove lowlevel_init   Andre Przywara
• [PATCH 1/5] sunxi: move non-essential code out of s_init()   Andre Przywara
• [PATCH 2/5] sunxi: move Cortex SMPEN setting into start.S   Andre Przywara
• [PATCH 3/5] sunxi: move early "SRAM setup" into separate file   Andre Przywara
• [PATCH 4/5] armv8: remove no longer needed lowlevel_init.S   Andre Przywara
• [PATCH 5/5] sunxi-common.h: remove pointless #ifdefs   Andre Przywara
• [PATCH 2/3] riscv: qemu: Enable HTIF console support   Rick Chen
• [PATCH 3/3] riscv: qemu: Implement is_flash_available() for MTD NOR   Rick Chen
• [RFC PATCH] efi_loader: clean up uefi secure boot image verification logic   AKASHI Takahiro
• [PATCH 1/5] sunxi: move non-essential code out of s_init()   Samuel Holland
• [PATCH] regulator: bd718x7: Bypass bogus warnings   Marek Vasut
• [PATCH 2/5] sunxi: move Cortex SMPEN setting into start.S   Samuel Holland
• [PATCH 1/2] ARM: imx: imx8m: Align PLL 1.2 GHz option with Linux   Marek Vasut
• [PATCH 2/2] ARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options   Marek Vasut
• [PATCH] arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0   Marek Vasut
• [PATCH] arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B   Marek Vasut
• [PATCH 3/5] sunxi: move early "SRAM setup" into separate file   Samuel Holland
• [PATCH 4/5] armv8: remove no longer needed lowlevel_init.S   Samuel Holland
• [PATCH 5/5] sunxi-common.h: remove pointless #ifdefs   Samuel Holland
• [PATCH 1/3] efi: Add debugging to efi_set_bootdev()   Heinrich Schuchardt
• [PATCH 2/3] efi: Use device_get_uclass_id() where appropriate   Heinrich Schuchardt
• [PATCH 3/3] efi: Drop unnecessary calls to blk_find_device()   Heinrich Schuchardt
• [RESEND PATCH 1/3] Nokia RX-51: Update documentation about ext2/3/4   Heinrich Schuchardt
• [PATCH 1/3] serial: Add RISC-V HTIF console driver   Bin Meng
• [RESEND PATCH 2/3] Nokia RX-51: Update documentation about flashing   Heinrich Schuchardt
• [PATCH 3/3] riscv: qemu: Implement is_flash_available() for MTD NOR   Bin Meng
• [RESEND PATCH 3/3] Nokia RX-51: Convert documentation to rst format   Heinrich Schuchardt
• [PATCH 0/3] QEMU spike machine support for U-Boot   Bin Meng
• [PATCH 1/3] serial: Add RISC-V HTIF console driver   Anup Patel
• [PATCH 3/3] riscv: qemu: Implement is_flash_available() for MTD NOR   Anup Patel
• [PATCH 0/3] QEMU spike machine support for U-Boot   Anup Patel
• [RFC PATCH] efi_loader: clean up uefi secure boot image verification logic   Ilias Apalodimas
• [PATCH 1/1] configs: disable UEFI for Colibri VF610   Marcel Ziswiler
• [PATCH v2 3/4] arm64: dts: imx8mm-u-boot.dtsi: use dash for node names   Marcel Ziswiler
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Rasmus Villemoes
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Marcel Ziswiler
• [PATCH V3] usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn   Marcel Ziswiler
• [PATCH 1/1] i2c: mvtwsi: Add compatible string for allwinner, sun4i-a10-i2c   Jose Torres
• [PATCH 1/3] serial: Add RISC-V HTIF console driver   Bin Meng
• [PATCH 3/3] riscv: qemu: Implement is_flash_available() for MTD NOR   Bin Meng
• [PATCH] arm: kirkwood: Pogoplug V4 : Use Marvel network PHY driver   Tony Dinh
• [RESEND PATCH] arm: kirkwood: Pogoplug V4 : Use Marvell network PHY driver   Tony Dinh
• [PATCH] scripts: Makefile: also clean subdir dtc   Philippe Reynes
• [PATCH] regulator: bd718x7: Bypass bogus warnings   Vaittinen, Matti
• [PATCH] arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B   Fabio Estevam
• [PATCH 0/2] EFI: Add CAPSULE_FLAG_INITIATE_RESET support   Masami Hiramatsu
• [PATCH 1/2] EFI: Support CAPSULE_FLAGS_INITIATE_RESET for capsule update   Masami Hiramatsu
• [PATCH 2/2] mkeficapsule: Support "--flags reset" option   Masami Hiramatsu
• [PATCH 1/3] serial: Add RISC-V HTIF console driver   Anup Patel
• [PATCH 3/3] riscv: qemu: Implement is_flash_available() for MTD NOR   Anup Patel
• [PATCH 1/2] EFI: Support CAPSULE_FLAGS_INITIATE_RESET for capsule update   AKASHI Takahiro
• [RFC 0/2] A/B firmware update based in eMMC boot partition.   Ying-Chun Liu
• [RFC 1/2] drivers: mmc: write protect active boot area after mmc init.   Ying-Chun Liu
• [RFC 2/2] drivers: dfu: flash firmware to inactive boot area and active it   Ying-Chun Liu
• [RFC 0/2] A/B firmware update based in eMMC boot partition.   Wolfgang Denk
• [PATCH 1/1] efi_loader: clean up uefi secure boot image verification logic   Ilias Apalodimas
• [PATCH v4 00/20] J721S2: Add initial support   Aswath Govindraju
• [PATCH v4 01/20] remoteproc: k3_system_controller: Support optional boot_notification channel   Aswath Govindraju
• [PATCH v4 02/20] ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance   Aswath Govindraju
• [PATCH v4 03/20] ram: k3-ddrss: Add support for multiple instances of DDR subsystems   Aswath Govindraju
• [PATCH v4 04/20] ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple DDR subsystems   Aswath Govindraju
• [PATCH v4 05/20] arm: K3: Add basic support for J721S2 SoC definition   Aswath Govindraju
• [PATCH v4 06/20] drivers: dma: Add support for J721S2   Aswath Govindraju
• [PATCH v4 07/20] clk: clk-k3: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v4 08/20] power: domain: ti: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v4 09/20] ram: k3-ddrss: Add support for J721S2 SoC   Aswath Govindraju
• [PATCH v4 10/20] soc: ti: k3-socinfo: Add entry for J721S2 SoC   Aswath Govindraju
• [PATCH v4 11/20] board: ti: j721s2: Add board support for J721S2   Aswath Govindraju
• [PATCH v4 12/20] dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC   Aswath Govindraju
• [PATCH v4 13/20] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2   Aswath Govindraju
• [PATCH v4 14/20] arm: dts: Add initial support for J721S2 SoC   Aswath Govindraju
• [PATCH v4 15/20] arm: dts: Add initial support for J721S2 System on Module   Aswath Govindraju
• [PATCH v4 16/20] arm: dts: Add support for A72 specific J721S2 Common Processor Board   Aswath Govindraju
• [PATCH v4 17/20] arm: dts: k3-j721s2: Add r5 specific dt support   Aswath Govindraju
• [PATCH v4 18/20] arm: dts: k3-j721s2-ddr: Add DDR support   Aswath Govindraju
• [PATCH v4 19/20] configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig   Aswath Govindraju
• [PATCH v4 20/20] configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig   Aswath Govindraju
• [PATCH v3 00/20] J721S2: Add initial support   Aswath Govindraju
• [PATCH 2/5] sunxi: move Cortex SMPEN setting into start.S   Andre Przywara
• [PATCH] arm: kirkwood: Pogoplug V4 : Use Marvel network PHY driver   Stefan Roese
• [PATCH 1/4] pci: Fix setting controller's last_busno   Stefan Roese
• Compile only changed files when doing 'make'?   Grant Edwards
• [PATCH 2/4] pci: Extend 'pci regions' command with bus number   Stefan Roese
• [PATCH 3/4] pci: Add checks for valid cmdline arguments   Stefan Roese
• [PATCH 4/4] pci: Extend 'pci' command with bus option '*'   Stefan Roese
• [PATCH 5/6] Makefile: Add a pylint checker to the build   Tom Rini
• [PATCH 1/6] .gitignore: Ignore any html coverage directory   Tom Rini
• [PATCH 2/6] dtoc: Fix up a code comment that confuses pylint   Tom Rini
• [PATCH 3/6] patman: Update the list of modules   Tom Rini
• [PATCH 4/6] tools: Add init files for Python tools   Tom Rini
• [PATCH 5/6] Makefile: Add a pylint checker to the build   Tom Rini
• [PATCH 1/1] test: fix pylint warnings in test_env.py   Tom Rini
• [PATCH 1/5] moveconfig: Correct operation of the 'imply' feature   Tom Rini
• [PATCH 2/5] moveconfig: Read the database in a separate function   Tom Rini
• [PATCH 3/5] moveconfig: Sort the options   Tom Rini
• [PATCH 4/5] moveconfig: Allow adding unit tests   Tom Rini
• [PATCH 5/5] moveconfig: Allow querying board configuration   Tom Rini
• [PATCH 1/6] moveconfig: Use single quotes   Tom Rini
• [PATCH 2/6] moveconfig: Convert to ArgumentParser   Tom Rini
• [PATCH 3/6] moveconfig: Drop check for old Python   Tom Rini
• [PATCH 4/6] moveconfig: Use a function to write files   Tom Rini
• [PATCH 5/6] moveconfig: Use a function to read files   Tom Rini
• [PATCH 6/6] moveconfig: Fix some pylint errors   Tom Rini
• [PATCH u-boot-pci] pci: iproc: Set all 24 bits of PCI class code   Tom Rini
• [PATCH 2/4] pci: Extend 'pci regions' command with bus number   Pali Rohár
• [PATCH u-boot-marvell 00/14] Another set of kwboot improvements   Marek Behún
• [PATCH u-boot-marvell 01/14] tools: kwboot: Increase blk_rsp_timeo to 2s   Marek Behún
• [PATCH u-boot-marvell 02/14] tools: kwboot: Wait blk_rsp_timeo when flushing   Marek Behún
• [PATCH u-boot-marvell 03/14] tools: kwboot: Improve retrying logic for incomplete xmodem packets   Marek Behún
• [PATCH u-boot-marvell 04/14] tools: kwboot: Remove code for handling CAN byte   Marek Behún
• [PATCH u-boot-marvell 05/14] tools: kwboot: Do not change received character in kwboot_xm_recv_reply()   Marek Behún
• [PATCH u-boot-marvell 06/14] tools: kwboot: Fix handling of repeated xmodem packets   Marek Behún
• [PATCH u-boot-marvell 07/14] tools: kwboot: Show 'E' in progress output when error occurs   Marek Behún
• [PATCH u-boot-marvell 08/14] tools: kwboot: Allow to use option -b without image path   Marek Behún
• [PATCH u-boot-marvell 09/14] tools: kwboot: Force BootROM to flush input queue after boot pattern   Marek Behún
• [PATCH u-boot-marvell 10/14] tools: kwboot: Remove 2s delay before sending first xmodem packet   Marek Behún
• [PATCH u-boot-marvell 11/14] tools: kwboot: Handle EINTR in kwboot_write()   Marek Behún
• [PATCH u-boot-marvell 12/14] tools: kwboot: Handle EINTR in kwboot_tty_recv()   Marek Behún
• [PATCH u-boot-marvell 13/14] tools: kwboot: Fix usage of -D without -t   Marek Behún
• [PATCH u-boot-marvell 14/14] tools: kwboot: Set debug flag to 1   Marek Behún
• Compile only changed files when doing 'make'?   Tom Rini
• [PATCH] arm: kirkwood: Pogoplug V4 : Use Marvel network PHY driver   Tony Dinh
• [PATCH 1/2] EFI: Support CAPSULE_FLAGS_INITIATE_RESET for capsule update   Masami Hiramatsu
• [PATCH 0/5] sunxi: remove lowlevel_init   Jesse Taube
• i.MX8MN (ROMv2) fails to boot over USB   Adam Ford
• [PATCH 0/5] sunxi: remove lowlevel_init   Jesse Taube
• Bug#1003490: u-boot: FTBFS on arch:all with qemu-ppce500 target   Vagrant Cascadian
• i.MX8MN (ROMv2) fails to boot over USB   Tim Harvey
• [PATCH 05/11] ARM: sunxi: Add support for F1C100s   Andre Przywara
• [PATCH 08/11] configs: sunxi: Add common SUNIV header   Andre Przywara
• [PATCH 1/2] EFI: Support CAPSULE_FLAGS_INITIATE_RESET for capsule update   Masami Hiramatsu
• do you have plan to add kaslrseed support to extlinux.conf   张 宁
• Bug#1003490: u-boot: FTBFS on arch:all with qemu-ppce500 target   Vagrant Cascadian
• [PATCH] scripts: Makefile: also clean subdir dtc   Simon Glass
• [PATCH] arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH v3 04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Tom Rini
• [PATCH 05/11] ARM: sunxi: Add support for F1C100s   Jesse Taube
• [PATCH 1/2] EFI: Support CAPSULE_FLAGS_INITIATE_RESET for capsule update   AKASHI Takahiro
• [PATCH 07/14] video: Drop references to CONFIG_VIDEO et al   Jason Liu
• Bug#1003490: u-boot: FTBFS on arch:all with qemu-ppce500 target   Aurelien Jarno
• [RFC] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [RFC 0/2] A/B firmware update based in eMMC boot partition.   Alexander Dahl
• [PATCH 1/2] EFI: Support CAPSULE_FLAGS_INITIATE_RESET for capsule update   Masami Hiramatsu
• [PATCH] fastboot: only look up real partition names when no alias exists   Matthias Schiffer
• [PATCH 05/11] ARM: sunxi: Add support for F1C100s   Andre Przywara
• [PATCH] arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet   Pali Rohár
• [RFC PATCH 0/1] RISCV_EFI_BOOT_PROTOCOL support in U-boot   Sunil V L
• [RFC PATCH 1/1] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Sunil V L
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Michael Nazzareno Trimarchi
• [PATCH v7 0/2] arm: imx8m: add support for Advantech RSB-3720   Ying-Chun Liu
• [PATCH v7 1/2] arm: dts: add imx8mp-rsb3720-a1 dts file   Ying-Chun Liu
• [PATCH v7 2/2] arm: imx8m: add support for Advantech RSB-3720   Ying-Chun Liu
• [PATCH v2 00/12] Add support for SUNIV and F1C100s.   Jesse Taube
• [PATCH v2 01/12] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code   Jesse Taube
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Jesse Taube
• [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code   Jesse Taube
• [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers   Jesse Taube
• [PATCH v2 05/12] dt-bindings: reset: Add initial suniv headers   Jesse Taube
• [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers   Jesse Taube
• [PATCH v2 07/12] sunxi: Add F1C100s DRAM initial support   Jesse Taube
• [PATCH v2 08/12] sunxi: board: Add support for SUNIV   Jesse Taube
• [PATCH v2 09/12] configs: sunxi: Add common SUNIV header   Jesse Taube
• [PATCH v2 10/12] mach-sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s   Jesse Taube
• [PATCH v2 12/12] configs: sunxi: Add support for Lichee Pi Nano   Jesse Taube
• [RFC PATCH 1/1] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Jessica Clarke
• Early debug UART not working on AM33XX SoC   Felix Brack
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Andre Przywara
• [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano   Andre Przywara
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano   Jesse Taube
• Compile only changed files when doing 'make'?   Grant Edwards
• [PATCH] arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH u-boot-marvell 01/14] tools: kwboot: Increase blk_rsp_timeo to 2s   Stefan Roese
• [PATCH u-boot-marvell 02/14] tools: kwboot: Wait blk_rsp_timeo when flushing   Stefan Roese
• [PATCH u-boot-marvell 03/14] tools: kwboot: Improve retrying logic for incomplete xmodem packets   Stefan Roese
• [PATCH u-boot-marvell 04/14] tools: kwboot: Remove code for handling CAN byte   Stefan Roese
• [PATCH] binman: Document the __bss_size symbol error   Simon Glass
• [PATCH] binman: doc: fix typo for u-boot-tpl   Simon Glass
• [PATCH 1/1] sandbox: sandbox_serial_pending depends on DM_VIDEO   Simon Glass
• [PATCH 1/1] sandbox: eth-raw: fix building with musl library   Simon Glass
• [PATCH v2 36/38] binman: Add a command to generate bintool docs   Simon Glass
• [PATCH v2 37/38] binman: Add documentation for bintools   Simon Glass
• [PATCH v2 35/38] binman: Complete test coverage of comp_util   Simon Glass
• [PATCH v2 34/38] binman: Plumb in support for missing bintools   Simon Glass
• [PATCH v2 33/38] binman: Convert to using the lzma_alone bintool   Simon Glass
• [PATCH v2 32/38] binman: Add a bintool implementation for lzma_alone   Simon Glass
• [PATCH v2 30/38] binman: Add a bintool implementation for lz4   Simon Glass
• [PATCH v2 31/38] binman: Convert to using the lz4 bintool   Simon Glass
• [PATCH v2 29/38] binman: Tidy up pylint warnings in comp_util   Simon Glass
• [PATCH v2 28/38] binman: Move compression into binman   Simon Glass
• [PATCH v2 26/38] binman: Convert to using the ifwitool bintool   Simon Glass
• [PATCH v2 27/38] binman: Convert to using the mkimage bintool   Simon Glass
• [PATCH v2 25/38] binman: Convert to using the futility bintool   Simon Glass
• [PATCH v2 24/38] binman: Convert to using the FIP bintool   Simon Glass
• [PATCH v2 22/38] binman: Enable bintool tests including cmdline processing   Simon Glass
• [PATCH v2 23/38] binman: Convert to using the CBFS bintool   Simon Glass
• [PATCH v2 21/38] binman: Add a bintool implementation for mkimage   Simon Glass
• [PATCH v2 20/38] binman: Add a bintool implementation for ifwitool   Simon Glass
• [PATCH v2 19/38] binman: Add a bintool implementation for futility   Simon Glass
• [PATCH v2 18/38] binman: Add a bintool implementation for fiptool   Simon Glass
• [PATCH v2 16/38] binman: Add tests for bintool   Simon Glass
• [PATCH v2 17/38] binman: Add a bintool implementation for cbfstool   Simon Glass
• [PATCH v2 15/38] binman: Plumb in support for bintools   Simon Glass
• [PATCH v2 14/38] binman: Add support for bintools   Simon Glass
• [PATCH v2 13/38] binman: Add installation instructions   Simon Glass
• [PATCH v2 12/38] binman: Correct path for fip_util   Simon Glass
• [PATCH v2 11/38] binman: Allow faked blobs in blob-ext-list   Simon Glass
• [PATCH v2 10/38] binman: Drop the image name from the fake-blob message   Simon Glass
• [PATCH v2 08/38] patman: Add a function to find a tool on the path   Simon Glass
• [PATCH v2 07/38] patman: Tidy up the download function a little   Simon Glass
• [PATCH v2 06/38] buildman: Move the download function to tools   Simon Glass
• [PATCH v2 05/38] patman: Allow running a tool and returning the full result   Simon Glass
• [PATCH v2 03/38] mkimage: Show the external-offset error   Simon Glass
• [PATCH v2 04/38] binman: Expand the external FIT test a little   Simon Glass
• [PATCH v2 01/38] Makefile: Fake external blobs by default with binman   Simon Glass
• [PATCH v2 02/38] binman: Tweak elf tests for a toolchain change   Simon Glass
• [PATCH v2] dm: Fix OF_BAD_ADDR definition   Simon Glass
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Simon Glass
• [PATCH] usb: Use the first available device for ehci_gadget   Simon Glass
• [PATCH u-boot-marvell 05/14] tools: kwboot: Do not change received character in kwboot_xm_recv_reply()   Stefan Roese
• [PATCH u-boot-marvell 06/14] tools: kwboot: Fix handling of repeated xmodem packets   Stefan Roese
• [PATCH u-boot-marvell 07/14] tools: kwboot: Show 'E' in progress output when error occurs   Stefan Roese
• [PATCH u-boot-marvell 08/14] tools: kwboot: Allow to use option -b without image path   Stefan Roese
• [PATCH u-boot-marvell 09/14] tools: kwboot: Force BootROM to flush input queue after boot pattern   Stefan Roese
• [PATCH u-boot-marvell 10/14] tools: kwboot: Remove 2s delay before sending first xmodem packet   Stefan Roese
• [PATCH u-boot-marvell 11/14] tools: kwboot: Handle EINTR in kwboot_write()   Stefan Roese
• [PATCH u-boot-marvell 12/14] tools: kwboot: Handle EINTR in kwboot_tty_recv()   Stefan Roese
• [PATCH u-boot-marvell 13/14] tools: kwboot: Fix usage of -D without -t   Stefan Roese
• [PATCH u-boot-marvell 14/14] tools: kwboot: Set debug flag to 1   Stefan Roese
• [PATCH 2/4] pci: Extend 'pci regions' command with bus number   Stefan Roese
• [PATCH v1] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [PATCH v2] binman: Skip node generation for images read from files   Simon Glass
• [PATCH] doc: replace @return by Return:   Simon Glass
• [PATCH v2] binman: Skip node generation for images read from files   Jan Kiszka
• i.MX8MN (ROMv2) fails to boot over USB   Michael Nazzareno Trimarchi
• [PATCH v2 09/12] configs: sunxi: Add common SUNIV header   Jesse Taube
• i.MX8MN (ROMv2) fails to boot over USB   Adam Ford
• [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c   Adam Ford
• [PATCH] imx: imx8mn_beacon: Fix USB booting   Adam Ford
• i.MX8MN (ROMv2) fails to boot over USB   Michael Nazzareno Trimarchi
• i.MX8MN (ROMv2) fails to boot over USB   Adam Ford
• drivers: mtd: spi: Allow Quad I/O enablement for ISSI SPI flash devices alongside spi-nor-tiny.c subsystem   Nathan Barrett-Morrison
• [PATCH] drivers: mtd: spi: Use correct 4 byte mode enablement for ISSI SPI flash devices alongside spi-nor-tiny.c subsystem   Nathan Barrett-Morrison
• drivers: mtd: spi: Use correct 4 byte mode enablement for ISSI SPI flash devices alongside spi-nor-tiny.c subsystem   Nathan Barrett-Morrison
• tools: imximage: i.MXRT flash config table (questions)   Jesse Taube
• [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c   Tommaso Merciai
• U boot for Roach2   Jael Rojas Miguel
• [PATCH v1 1/2] imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Oliver Graute
• [PATCH v1 2/2] imx: imx8qm_rm7720: adjust fdt_addr   Oliver Graute
• [PATCH] soc: soc_ti_k3: update j721e revision numbering   Bryan Brattlof
• [PATCH] cmd: mmc: Consider GP partitions in mmc hwpartition user enh start -   Jaehoon Chung
• [PATCH v5 03/13] mmc: fsl: Use brackets around if()   Jaehoon Chung
• [RFC 1/2] drivers: mmc: write protect active boot area after mmc init.   Jaehoon Chung
• [PATCH v2 7/9] power: domain: apple: Add reset support   Jaehoon Chung
• [PATCH v4 08/20] power: domain: ti: Add support for J721S2 SoC   Jaehoon Chung
• [PATCH 11/16] tools: Pass public-key node through to caller   Simon Glass
• [PATCH 12/16] tools: mkimage: Show where signatures/keys are written   Simon Glass
• [PATCH 09/16] tools: Pass the key blob around   Simon Glass
• [PATCH 08/16] tools: Tidy up argument order in fit_config_check_sig()   Simon Glass
• [PATCH 07/16] tools: Avoid confusion between keys and signatures   Simon Glass
• [PATCH 04/16] tools: Avoid leaving extra data at the end of copied files   Simon Glass
• [PATCH 05/16] tools: Improve comments in signing functions   Simon Glass
• [PATCH 06/16] tools: Drop unused name in image-host   Simon Glass
• [PATCH 02/16] fit_check_sign: Update help to mention the key is in a dtb   Simon Glass
• [PATCH 03/16] tools: Move copyfile() into a common file   Simon Glass
• [PATCH 01/16] rsa: Add debugging for failure cases   Simon Glass
• [PULL] u-boot-usb/master   Marek Vasut
• [RFC 1/2] drivers: mmc: write protect active boot area after mmc init.   Paul Liu
• [RFC 1/2] drivers: mmc: write protect active boot area after mmc init.   Jaehoon Chung
• [PATCH 1/1] doc: describe MSEL settings for booting from SD card   Heinrich Schuchardt
• Please pull u-boot-dm   Simon Glass
• [PATCH v2] power: zynqmp: Add power domain driver for ZynqMP   Jaehoon Chung
• [PATCH v2 0/4] QEMU spike machine support for U-Boot   Anup Patel
• [PATCH v2 1/4] serial: Add RISC-V HTIF console driver   Anup Patel
• [PATCH v2 2/4] riscv: qemu: Enable HTIF console support   Anup Patel
• [PATCH v2 3/4] riscv: qemu: Implement is_flash_available() for MTD NOR   Anup Patel
• [PATCH v2 4/4] doc: qemu-riscv: Update documentation for QEMU spike machine   Anup Patel
• Re: [RFC PATCH 1/1] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Heinrich Schuchardt
• [PATCH] ARM: at91: sama5d2: Enable the use of Galois Tables from ROM   Tudor Ambarus
• [PATCH] include: configs: move USB first in the boot order for rk3399   Dan Johansen
• [RFC PATCH 1/1] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Heinrich Schuchardt
• [PATCH 00/25] SIERRA: Add support for MultiLink   Aswath Govindraju
• [PATCH 01/25] phy: cadence: sierra: Fix for USB3 U1/U2 state   Aswath Govindraju
• [PATCH 02/25] phy: cadence: Sierra: Fix PHY power_on sequence   Aswath Govindraju
• [PATCH 03/25] phy: cadence: Sierra: Create PHY only for "phy" or "link" sub-nodes   Aswath Govindraju
• [PATCH 04/25] phy: cadence: Sierra: Move all clk_get_*() to a separate function   Aswath Govindraju
• [PATCH 05/25] phy: cadence: Sierra: Move all reset_control_get*() to a separate function   Aswath Govindraju
• [PATCH 06/25] phy: cadence: Sierra: Add array of input clocks in "struct cdns_sierra_phy"   Aswath Govindraju
• [PATCH 07/25] phy: cadence: Sierra: Add missing clk_disable_unprepare() in .remove callback   Aswath Govindraju
• [PATCH 08/25] phy: cadence: Sierra: Add a UCLASS_PHY device for links   Aswath Govindraju
• [PATCH 09/25] phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as a clock   Aswath Govindraju
• [PATCH 10/25] phy: ti: phy-j721e-wiz.c: Fix the condition for setting P_ENABLE_FORCE   Aswath Govindraju
• [PATCH 11/25] board: ti: j721e: evm.c: Add support for probing SerDes0   Aswath Govindraju
• [PATCH 12/25] arm: dts: k3-j721e: Add support for PLL_CMNLC clocks in SerDes0   Aswath Govindraju
• [PATCH 13/25] phy: cadence: Sierra: Prepare driver to add support for multilink configurations   Aswath Govindraju
• [PATCH 14/25] dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode   Aswath Govindraju
• [PATCH 15/25] phy: cadence: Sierra: Add support to get SSC type from device tree.   Aswath Govindraju
• [PATCH 16/25] phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation   Aswath Govindraju
• [PATCH 17/25] phy: cadence: Sierra: Add PHY PCS common register configurations   Aswath Govindraju
• [PATCH 18/25] phy: cadence: Sierra: Check cmn_ready assertion during PHY power on   Aswath Govindraju
• [PATCH 19/25] phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation   Aswath Govindraju
• [PATCH 20/25] phy: cadence: Sierra: Update single link PCIe register configuration   Aswath Govindraju
• [PATCH 21/25] phy: cadence: Sierra: Add support for PHY multilink configurations   Aswath Govindraju
• [PATCH 22/25] phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration   Aswath Govindraju
• [PATCH 23/25] phy: cadence: Sierra: Add support for skipping configuration   Aswath Govindraju
• [PATCH 24/25] arm: dts: k3-j721e: Add support for multilink PCIe + QSGMII   Aswath Govindraju
• [PATCH 25/25] include: configs: j721e_evm: Add support to boot ethfw core in j721e   Aswath Govindraju
• drivers: mtd: spi: Use correct 4 byte mode enablement for ISSI SPI flash devices alongside spi-nor-tiny.c subsystem   Pratyush Yadav
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Andre Przywara
• [RFC 0/6] Exynos5: Update devicetree files from linux kernel   Jaehoon Chung
• [PATCH v2 7/9] power: domain: apple: Add reset support   Mark Kettenis
• [PATCH v4 00/11] dra7: bring up and support IPU load/start   Amjad Ouled-Ameur
• [PATCH v4 01/11] configs: dra7xx_evm: Increase the size of SPL_MULTI_DTB_FIT   Amjad Ouled-Ameur
• [PATCH v4 02/11] reset: dra7: Add a reset driver   Amjad Ouled-Ameur
• [PATCH v4 03/11] arm: mach-omap2: load/start remoteproc IPU1/IPU2   Amjad Ouled-Ameur
• [PATCH v4 04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Amjad Ouled-Ameur
• [PATCH v4 05/11] linux: bitmap.h: Add find_next_zero_area function   Amjad Ouled-Ameur
• [PATCH v4 06/11] remoteproc: uclass: Add remoteproc resource handling helpers   Amjad Ouled-Ameur
• [PATCH v4 07/11] remoteproc: ipu: Add driver to bring up ipu   Amjad Ouled-Ameur
• [PATCH v4 08/11] dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes   Amjad Ouled-Ameur
• [PATCH v4 09/11] arm: dts: dra7: Add ipu and related nodes   Amjad Ouled-Ameur
• [PATCH v4 10/11] arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes   Amjad Ouled-Ameur
• [PATCH v4 11/11] dts: am57xx*: Add ipu early boot DT changes   Amjad Ouled-Ameur
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH v3 04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Amjad Ouled-Ameur
• [PATCH 1/1] binman: add sign option for binman   Ivan Mikhaylov
• [PATCH 1/2] tools: binman: main.py: add build-sandbox in sys.path   Philippe Reynes
• [PATCH 2/2] tools: binman: main.py: add /tmp/sandbox sys.path   Philippe Reynes
• Question on running uboot_testpy with tbot   Harald Seiler
• [PATCH 1/7] clk: Make rfree return void   Simon Glass
• [PATCH v2 1/3] dm: fix up documentation for uclass_get_by_name_len   Simon Glass
• [PATCH v2 2/3] dm: compare full name in uclass_get_by_name   Simon Glass
• [PATCH v2 3/3] sandbox: test: activate tests for the command LOG   Simon Glass
• [PATCH v3 06/11] remoteproc: uclass: Add remoteproc resource handling helpers   Simon Glass
• [PATCH 1/1] bootcount: fix printf() code   Simon Glass
• [PATCH v4 1/1] rsa: adds rsa3072 algorithm   Simon Glass
• Early debug UART not working on AM33XX SoC   Simon Glass
• [RFC v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v1 1/1] env: fat: Allow overriding interface, device and partition   Simon Glass
• difference between fdtdec and fdt_support ?   Simon Glass
• Possiable memory conflict with fdt memory region   Simon Glass
• [PATCH v1] driver: fastboot: Fix getvar_get_part_info when flash nand   Simon Glass
• [PATCH 7/8 v7] doc: qemu: Add instructions for swtpm usage   Simon Glass
• two questions on verified boot   Simon Glass
• [PATCH 2/2] tools: binman: main.py: add /tmp/sandbox sys.path   Simon Glass
• [PATCH 2/2] tools: binman: main.py: add /tmp/sandbox sys.path   Philippe REYNES
• [PATCH 0/3] save prev bootloader data, when u-boot chainloaded   sankouski-dzmitry
• [PATCH 1/3] arm: init: save previous bootloader data   sankouski-dzmitry
• [PATCH 2/3] board: starqltechn: get board usable - add bootcmd and docs   sankouski-dzmitry
• [PATCH 3/3] board: axy17lte: get board usable - add bootcmd and docs   sankouski-dzmitry
• [PATCH 1/5] sunxi: move non-essential code out of s_init()   Simon Glass
• [PATCH 3/5] sunxi: move early "SRAM setup" into separate file   Simon Glass
• [PATCH 4/5] armv8: remove no longer needed lowlevel_init.S   Simon Glass
• [PATCH 5/5] sunxi-common.h: remove pointless #ifdefs   Simon Glass
• two questions on verified boot   Rasmus Villemoes
• [PATCH 1/7] clk: Make rfree return void   Sean Anderson
• [PATCH v4 06/11] remoteproc: uclass: Add remoteproc resource handling helpers   Simon Glass
• Question on running uboot_testpy with tbot   Simon Glass
• [PATCH] fastboot: only look up real partition names when no alias exists   Sean Anderson
• Early debug UART not working on AM33XX SoC   Felix Brack
• [RESEND PATCH 3/3] Nokia RX-51: Convert documentation to rst format   Pali Rohár
• How to modify defconfig file - make savedefconfig?   Grant Edwards
• [PATCH v1] driver: fastboot: Fix getvar_get_part_info when flash nand   Sean Anderson
• [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c   Adam Ford
• [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c   Michael Nazzareno Trimarchi
• Please pull u-boot-dm   Tom Rini
• [RFC 0/6] Exynos5: Update devicetree files from linux kernel   Tom Rini
• Early debug UART not working on AM33XX SoC   Simon Glass
• [RFC 0/6] Exynos5: Update devicetree files from linux kernel   Simon Glass
• [PATCH] soc: soc_ti_k3: update j721e revision numbering   Bryan Brattlof
• Please pull u-boot-dm   Simon Glass
• [PATCH] soc: soc_ti_k3: update j721e revision numbering   Tom Rini
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Jesse Taube
• [PATCH 1/2] imx: imx8mm_beacon: Remove redundant code   Adam Ford
• [PATCH 2/2] imx: imx8mn_beacon: Remove redundant code   Adam Ford
• [PATCH 1/7] clk: Make rfree return void   Simon Glass
• [PATCH] sandbox: fix build failure with musl and SDL   Simon Glass
• [PATCH 1/1] efi_loader: clean up uefi secure boot image verification logic   Ilias Apalodimas
• [PATCH 7/8 v7] doc: qemu: Add instructions for swtpm usage   Heinrich Schuchardt
• [PATCH] fastboot: only look up real partition names when no alias exists   Tom Rini
• [PATCH v2 7/9] power: domain: apple: Add reset support   Jaehoon Chung
• [PATCH] efi_loader: correctly handle mixed hashes and signatures in db   Ilias Apalodimas
• [RFC PATCH v3 4/5] beacon: imx8mn: override env_get_location in imx8mn_beacon.c   Tommaso Merciai
• [PATCH] imx: ventana: correct splashimage load address   Tim Harvey
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Tim Harvey
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Andre Przywara
• [PATCH 3/5] sunxi: move early "SRAM setup" into separate file   Andre Przywara
• [PATCH] usb: gadget: ci: Avoid null pointer dereference   Marek Vasut
• [PATCH] Revert "mmc: fsl_esdhc_imx: add wait_dat0() support"   Marek Vasut
• [PATCH 1/3] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy   Marek Vasut
• [PATCH 2/3] arm64: dts: imx8mm: Add the pcie phy support   Marek Vasut
• [PATCH 3/3] arm64: dts: imx8mm: Add the pcie support   Marek Vasut
• [PATCH] dm: core: Check flags before removing devices   Marek Vasut
• Please pull u-boot-dm   Tom Rini
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Jesse Taube
• [RFC v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [RFC PATCH 1/1] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Sunil V L
• [PATCH 3/5] sunxi: move early "SRAM setup" into separate file   Samuel Holland
• [PATCH] net: ti: am65-cpsw: Cleanup resources before jump to kernel   Vignesh Raghavendra
• converting IMX6 board to DM_ETH and DM_USB - usb_ether gadget support   Heiko Schocher
• [PATCH v2 4/4] doc: qemu-riscv: Update documentation for QEMU spike machine   Bin Meng
• [PATCH] efi_loader: correctly handle mixed hashes and signatures in db   Heinrich Schuchardt
• [PATCH] Revert "mmc: fsl_esdhc_imx: add wait_dat0() support"   Jaehoon Chung
• [PATCH v2 3/4] riscv: qemu: Implement is_flash_available() for MTD NOR   Bin Meng
• [PATCH] efi_loader: correctly handle mixed hashes and signatures in db   Ilias Apalodimas
• [PATCH v2 00/25] SIERRA: Add support for Mulitlink Configuration   Aswath Govindraju
• [PATCH v2 01/25] phy: cadence: sierra: Fix for USB3 U1/U2 state   Aswath Govindraju
• [PATCH v2 02/25] phy: cadence: Sierra: Fix PHY power_on sequence   Aswath Govindraju
• [PATCH v2 03/25] phy: cadence: Sierra: Create PHY only for "phy" or "link" sub-nodes   Aswath Govindraju
• [PATCH v2 04/25] phy: cadence: Sierra: Move all clk_get_*() to a separate function   Aswath Govindraju
• [PATCH v2 05/25] phy: cadence: Sierra: Move all reset_control_get*() to a separate function   Aswath Govindraju
• [PATCH v2 06/25] phy: cadence: Sierra: Add array of input clocks in "struct cdns_sierra_phy"   Aswath Govindraju
• [PATCH v2 07/25] phy: cadence: Sierra: Add missing clk_disable_unprepare() in .remove callback   Aswath Govindraju
• [PATCH v2 08/25] phy: cadence: Sierra: Add a UCLASS_PHY device for links   Aswath Govindraju
• [PATCH v2 09/25] phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as a clock   Aswath Govindraju
• [PATCH v2 10/25] phy: ti: phy-j721e-wiz.c: Fix the condition for setting P_ENABLE_FORCE   Aswath Govindraju
• [PATCH v2 11/25] board: ti: j721e: evm.c: Add support for probing SerDes0   Aswath Govindraju
• [PATCH v2 12/25] arm: dts: k3-j721e: Add support for PLL_CMNLC clocks in SerDes0   Aswath Govindraju
• [PATCH v2 13/25] phy: cadence: Sierra: Prepare driver to add support for multilink configurations   Aswath Govindraju
• [PATCH v2 14/25] dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode   Aswath Govindraju
• [PATCH v2 15/25] phy: cadence: Sierra: Add support to get SSC type from device tree.   Aswath Govindraju
• [PATCH v2 16/25] phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation   Aswath Govindraju
• [PATCH v2 17/25] phy: cadence: Sierra: Add PHY PCS common register configurations   Aswath Govindraju
• [PATCH v2 18/25] phy: cadence: Sierra: Check cmn_ready assertion during PHY power on   Aswath Govindraju
• [PATCH v2 19/25] phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation   Aswath Govindraju
• [PATCH v2 20/25] phy: cadence: Sierra: Update single link PCIe register configuration   Aswath Govindraju
• [PATCH v2 21/25] phy: cadence: Sierra: Add support for PHY multilink configurations   Aswath Govindraju
• [PATCH v2 22/25] phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration   Aswath Govindraju
• [PATCH v2 23/25] phy: cadence: Sierra: Add support for skipping configuration   Aswath Govindraju
• [PATCH v2 24/25] arm: dts: k3-j721e: Add support for multilink PCIe + QSGMII   Aswath Govindraju
• [PATCH v2 25/25] include: configs: j721e_evm: Add support to boot ethfw core in j721e   Aswath Govindraju
• [PATCH 00/25] SIERRA: Add support for MultiLink   Aswath Govindraju
• [PATCH] net: bootp: Make root path (option 17) length configurable   Andre Kalb
• [PATCH v2 1/1] sandbox: fix build failure with musl and SDL   Heinrich Schuchardt
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imx8mm   Heiko Thiery
• [PATCH 2/2] configs/*imx8mm*: remove [SPL_]CLK_COMPOSITE_CCF   Heiko Thiery
• How to modify defconfig file - make savedefconfig?   Alexander Dahl
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imx8mm   Marcel Ziswiler
• [PATCH 2/2] configs/*imx8mm*: remove [SPL_]CLK_COMPOSITE_CCF   Marcel Ziswiler
• [PATCH] ARM: dts: at91: sama7g5ek: disable slew rate for GMACs non MDIO pins   Codrin Ciubotariu
• [RFC v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v2 2/4] riscv: qemu: Enable HTIF console support   Bin Meng
• [PATCH] arm: pdu001: Exend the list of maintained files   Felix Brack
• [PATCH] riscv: Fix build against binutils 2.38   Alexandre Ghiti
• [PATCH v2 1/4] serial: Add RISC-V HTIF console driver   Bin Meng
• [PATCH] riscv: Fix build against binutils 2.38   Bin Meng
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Andre Przywara
• [PATCH 1/1] doc: describe MSEL settings for booting from SD card   Bin Meng
• [RFC PATCH V2 0/2] RISCV_EFI_BOOT_PROTOCOL support in U-boot   Sunil V L
• [RFC PATCH V2 1/2] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Sunil V L
• [RFC PATCH V2 2/2] efi_selftest: unit test for RISCV_EFI_BOOT_PROTOCOL   Sunil V L
• [PATCH 1/3] dfu: use pointer to pass length to dfu_write()   Tom Rini
• [PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit   Angus Ainslie
• [PATCH 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB   Tom Rini
• [PATCH] ARM: dts: at91: sama7g5ek: disable slew rate for GMACs non MDIO pins   Eugen.Hristev at microchip.com
• [PATCH] ARM: dts: at91: sama7g5ek: disable slew rate for GMACs non MDIO pins   Claudiu.Beznea at microchip.com
• [RFC PATCH V2 2/2] efi_selftest: unit test for RISCV_EFI_BOOT_PROTOCOL   Heinrich Schuchardt
• [RFC PATCH V2 1/2] efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL support   Heinrich Schuchardt
• [PATCH] Revert "mmc: fsl_esdhc_imx: add wait_dat0() support"   Marek Vasut
• [PATCH] riscv: Fix build against binutils 2.38   Heinrich Schuchardt
• [PATCH] riscv: Fix build against binutils 2.38   Aurelien Jarno
• [PATCH] riscv: Fix build against binutils 2.38   Heinrich Schuchardt
• [PATCH] riscv: Fix build against binutils 2.38   Aurelien Jarno
• [PATCH] imx: ventana: correct splashimage load address   ZHIZHIKIN Andrey
• [PATCH] ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR   Marek Vasut
• [PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID   Heinrich Schuchardt
• [PATCH] binman: Skip node generation for images read from files   Jan Kiszka
• [PATCH] fastboot: fix fastboot_set_reboot_flag()   Tom Rini
• [PATCH] dfu: handle short frame result of UPLOAD in state_dfu_idle   Tom Rini
• [PATCH] fastboot: only look up real partition names when no alias exists   Tom Rini
• [PATCH 1/2 v2] efi_loader: correctly handle mixed hashes and signatures in db   Ilias Apalodimas
• [PATCH 2/2 v2] efi_loader: hash the image once before checking against db/dbx   Ilias Apalodimas
• do you have plan to add kaslrseed support to extlinux.conf   Chris Morgan
• [PATCH v2 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Alper Nebi Yasak
• [PATCH 1/4] drivers: Introduce vibrator uclass   Tom Rini
• [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder   Jesse Taube
• [PATCH v4 0/4] rockchip: sdhci: Fix reinit and add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v4 1/4] mmc: sdhci: Add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v4 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Alper Nebi Yasak
• [PATCH v4 3/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399   Alper Nebi Yasak
• [PATCH v4 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Alper Nebi Yasak
• [PATCH] squashfs: Fix sqfsls errors when root is a ldir   Tom Rini
• i.MX8MN (ROMv2) fails to boot over USB   Tim Harvey
• i.MX8MN (ROMv2) fails to boot over USB   Adam Ford
• [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code   Andre Przywara
• [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers   Andre Przywara
• [PATCH] add kaslr-seed generation to extlinux.conf   Zhang Ning
• [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers   Andre Przywara
• [PATCH v2 09/12] configs: sunxi: Add common SUNIV header   Andre Przywara
• [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s   Andre Przywara
• [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s   Jesse Taube
• [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s   Andre Przywara
• [PATCH v2 00/12] Add support for SUNIV and F1C100s.   Andre Przywara
• [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code   Jesse Taube
• [PATCH v2 00/12] Add support for SUNIV and F1C100s.   Jesse Taube
• i.MX8MN (ROMv2) fails to boot over USB   Tim Harvey
• [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s   Jesse Taube
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• i.MX8MN (ROMv2) fails to boot over USB   Adam Ford
• [PATCH] pylint: Adjust how the output is produced   Simon Glass
• [PATCH v1 1/1] env: fat: Allow overriding interface, device and partition   何勇
• [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code   Andre Przywara
• [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s   Andre Przywara
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Andre Przywara
• [PATCH] pylint: Adjust how the output is produced   Tom Rini
• [PATCH] squashfs: show an error message if the inode_table can't be, allocated   Tom Rini
• [PATCH V3] phy: nop-phy: Enable reset-gpios support   Tom Rini
• [PATCH] add kaslr-seed generation to extlinux.conf   Ilias Apalodimas
• [PATCH V4] phy: nop-phy: Enable reset-gpios support   Adam Ford
• [PATCH v2 1/1] sandbox: fix build failure with musl and SDL   Heinrich Schuchardt
• [PATCH] moveconfig: Fix code relying on now-stripped newline characters   Alper Nebi Yasak
• [PATCH v3 00/10] Add support for SUNIV and F1C100s.   Jesse Taube
• [PATCH v3 01/10] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code   Jesse Taube
• [PATCH v3 02/10] mach-sunxi: Move timer code to mach folder   Jesse Taube
• [PATCH v3 03/10] arm: arm926ej-s: Add sunxi code   Jesse Taube
• [PATCH v3 04/10] ARM: sunxi: Add clock and uart to sunxi headers   Jesse Taube
• [PATCH v3 05/10] sunxi: Add F1C100s DRAM initial support   Jesse Taube
• [PATCH v3 06/10] sunxi: board: Add support for SUNIV   Jesse Taube
• [PATCH v3 07/10] configs: sunxi: Add common SUNIV header   Jesse Taube
• [PATCH v3 08/10] mach-sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH v3 09/10] ARM: dts: suniv: Add device tree files and bindings for F1C100s   Jesse Taube
• [PATCH v3 10/10] configs: sunxi: Add support for Lichee Pi Nano   Jesse Taube
• [PATCH] Convert CONFIG_REMAKE_ELF to Kconfig   Alper Nebi Yasak
• [PATCH] armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER   Alper Nebi Yasak
• [PATCH] rockchip: Set default LNX_KRNL_IMG_TEXT_OFFSET_BASE to SYS_TEXT_BASE   Alper Nebi Yasak
• [PATCH 1/1] test: test field truncation in snprint()   Heinrich Schuchardt
• [PATCH] add kaslr-seed generation to extlinux.conf   ning
• [PATCH 0/2] sunxi: Fix two H616 DRAM bugs   Jernej Skrabec
• [PATCH 1/2] sunxi: fix H616 DRAM ODT support   Jernej Skrabec
• [PATCH 2/2] sunxi: Fix H616 DRAM read calibration for dual rank   Jernej Skrabec
• [PATCH 0/2] lib: fix snprintf() for UTF-16 strings   Heinrich Schuchardt
• [PATCH 1/2] lib: fix snprintf() for UTF-16 strings   Heinrich Schuchardt
• [PATCH 2/2] test: test UTF-16 truncation in sprintf()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix device path to text protocol   Heinrich Schuchardt
• [PATCH v3] spl: add support for custom boot method names   Tom Rini
• [PATCH 1/4] pci: Fix setting controller's last_busno   Tom Rini
• [PATCH 2/4] pci: Extend 'pci regions' command with bus number   Tom Rini
• [PATCH 3/4] pci: Add checks for valid cmdline arguments   Tom Rini
• [PATCH 4/4] pci: Extend 'pci' command with bus option '*'   Tom Rini
• [PATCH 1/4] net: ti: am65-cpsw-nuss: Fix err msg for port bind failures   Tom Rini
• [PATCH 2/4] ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL   Tom Rini
• [PATCH 3/4] configs: am64xx_evm: Increase BSS max size to 16K   Tom Rini
• [PATCH 4/4] configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot   Tom Rini
• [PATCH v4] gitlab/azure: x86: Add a coreboot test   Tom Rini
• [PATCH 1/1] dm: serial: Add a migration deadline for serial   Tom Rini
• [PATCH v4 1/1] rsa: adds rsa3072 algorithm   Tom Rini
• [PATCH] dfu: mtd: skip empty pages when writing page for UBI partition   Tom Rini
• [PATCH 1/1] bootcount: fix printf() code   Tom Rini
• [PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit   Fabio Estevam
• [PATCH] imx: imx8mn_beacon: Fix USB booting   Fabio Estevam
• [PATCH] dm: Use parenthesis for the device_get_ops macro argument   Sughosh Ganu
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH 1/1] cmd: add serial console support for the cls command   Heinrich Schuchardt
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Giulio Benetti
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Samuel Holland
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID   Simon Glass
• [PATCH] moveconfig: Fix code relying on now-stripped newline characters   Simon Glass
• [PATCH 00/17] patman: Convert camel case   Simon Glass
• [PATCH 01/17] patman: Convert camel case in tools.py   Simon Glass
• [PATCH 02/17] patman: Convert camel case in command.py   Simon Glass
• [PATCH 03/17] patman: Convert camel case in checkpatch.py   Simon Glass
• [PATCH 04/17] patman: Convert camel case in commit.py   Simon Glass
• [PATCH 05/17] patman: Convert camel case in cros_subprocess.py   Simon Glass
• [PATCH 06/17] patman: Convert camel case in func_test.py   Simon Glass
• [PATCH 07/17] patman: Convert camel case in get_maintainer.py   Simon Glass
• [PATCH 08/17] patman: Convert camel case in gitutil.py   Simon Glass
• [PATCH 09/17] patman: Convert camel case in project.py   Simon Glass
• [PATCH 10/17] patman: Convert camel case in test_checkpatch.py   Simon Glass
• [PATCH 11/17] patman: Convert camel case in test_util.py   Simon Glass
• [PATCH 12/17] patman: Convert camel case in tout.py   Simon Glass
• [PATCH 13/17] patman: Rename Print() to Tprint()   Simon Glass
• [PATCH 14/17] patman: Rename Color() method to build()   Simon Glass
• [PATCH 15/17] patman: Convert camel case in terminal.py   Simon Glass
• [PATCH 16/17] patman: Update with new pylint scores   Simon Glass
• [PATCH 17/17] RFC: tools: Add a camel-case conversion script   Simon Glass
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Giulio Benetti
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Giulio Benetti
• [PATCH 09/11] sunxi: Add support for SUNIV architecture   Jesse Taube
• [BUG] efi_loader: ESRT table not correctly built   Heinrich Schuchardt
• [PATCH] acpi: Move acpi_write_tables() to a generic header   Simon Glass
• [PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID   Heinrich Schuchardt
• [PATCH 1/3] efi: Add debugging to efi_set_bootdev()   Simon Glass
• [PATCH 3/3] efi: Drop unnecessary calls to blk_find_device()   Simon Glass
• [PATCH v2 1/3] efi: Add debugging to efi_set_bootdev()   Simon Glass
• [PATCH v2 2/3] efi: Use device_get_uclass_id() where appropriate   Simon Glass
• [PATCH v2 3/3] efi: Drop unnecessary calls to blk_find_device()   Simon Glass
• [PATCH v4 1/4] checkpatch: Support wide strings   Simon Glass
• [PATCH v3 02/10] mach-sunxi: Move timer code to mach folder   Andre Przywara
• [PATCH v3 08/10] mach-sunxi: Add support for SUNIV architecture   Andre Przywara
• [PATCH v3 09/10] ARM: dts: suniv: Add device tree files and bindings for F1C100s   Andre Przywara
• [PATCH v3 10/10] configs: sunxi: Add support for Lichee Pi Nano   Andre Przywara
• [PATCH v3 30/31] bootstd: doc: Add documentation   Ilias Apalodimas
• [PATCH 2/4] sunxi: gpio: Add per-bank drive and pull setters   Andre Przywara
• [PATCH 3/4] gpio: sunxi: Implement .set_flags   Andre Przywara
• [PATCH] [v2] add kaslr-seed generation to extlinux.conf   Zhang Ning
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imx8mn   Heiko Thiery
• [PATCH 2/2] configs/*imx8mn*: remove [SPL_]CLK_COMPOSITE_CCF   Heiko Thiery
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10{20|50}   Heiko Thiery
• [PATCH 2/2] configs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCF   Heiko Thiery
• [PATCH 0/3] save prev bootloader data, when u-boot chainloaded   Dzmitry Sankouski
• [PATCH 1/3 v2] arm: init: save previous bootloader data   Dzmitry Sankouski
• [PATCH 2/3 v2] board: starqltechn: get board usable - add bootcmd and docs   Dzmitry Sankouski
• [PATCH 3/3 v2] board: axy17lte: get board usable - add bootcmd and docs   Dzmitry Sankouski
• [PATCH 2/2] board: starqltechn: get board usable - fix defconfig and strip config options   Dzmitry Sankouski
• [PATCH 2/2] configs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCF   Giulio Benetti
• [PATCH 1/2] clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10{20|50}   Giulio Benetti
• [PATCH] [v2] add kaslr-seed generation to extlinux.conf   Zhang Ning
• [PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit   Angus Ainslie
• [PATCH] arm: dts: imx8mq-pinfunc: add a define for the SION bit   Fabio Estevam
• [PATCH 0/3] sunxi: H6/H616: PRCM updates   Jernej Skrabec
• [PATCH 1/3] sunxi: prcm: Add a few registers   Jernej Skrabec
• [PATCH 2/3] sunxi: clock: H6/H616: Add resistor calibration   Jernej Skrabec
• [PATCH 3/3] sunxi: clock: H6: Adjust PLL LDO before clock setup   Jernej Skrabec
• [PATCH v2 1/2] Makefile: Create a file to indicate the config   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH 1/3] sunxi: prcm: Add a few registers   Samuel Holland
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Michal Simek
• [PATCH] moveconfig: Fix code relying on now-stripped newline characters   Alper Nebi Yasak
• Pull request: u-boot-sunxi/master for 2022.04   Andre Przywara
• [PATCH 1/2] sunxi: fix H616 DRAM ODT support   Andre Przywara
• [PATCH 2/2] sunxi: Fix H616 DRAM read calibration for dual rank   Andre Przywara
• [PATCH] arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH] moveconfig: Fix code relying on now-stripped newline characters   Simon Glass
• [PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID   Simon Glass
• [PATCH v1 0/5] Move board specific files to board directory   Simon Glass
• [PATCH v1 3/5] scripts: Makefile.autoconf: allow CONFIG_SYS_CONFIG_NAME file to live in board directory   Simon Glass
• [PATCH] dm: Use parenthesis for the device_get_ops macro argument   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH] binman: Skip node generation for images read from files   Simon Glass
• [PATCH 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB   Masami Hiramatsu
• Please test U-Boot Allwinner F1C100s support   Andre Przywara
• Please test U-Boot Allwinner F1C100s support   Jesse Taube
• Pull request: u-boot-sunxi/master for 2022.04   Tom Rini
• [PATCH v2 0/5] DFU: Update dfu_alt_info parser etc.   Masami Hiramatsu
• [PATCH v2 1/5] DFU: Do not copy the entity name over the buffer size   Masami Hiramatsu
• [PATCH v2 2/5] DFU: Accept redundant spaces and tabs in dfu_alt_info   Masami Hiramatsu
• [PATCH v2 3/5] DFU: Check the number of arguments and argument string strictly   Masami Hiramatsu
• [PATCH v2 4/5] doc: usage: DFU: Fix dfu_alt_info document   Masami Hiramatsu
• [PATCH v2 5/5] cmd/dfu: Enable 'dfu list' command without DFU_OVER_USB   Masami Hiramatsu
• [PATCH] gpio: Add gpio_request_by_line_name()   Andrew Jeffery
• [PATCH] image: Control FIT signature verification at runtime   Andrew Jeffery
• [PATCH] spl: ymodem: Fix buffer overflow during Image copy   Vignesh Raghavendra
• [PATCH 0/4] Zynq qspi updates   Ashok Reddy Soma
• [PATCH 1/4] spi: zynq_qspi: Typecast rxbuf properly   Ashok Reddy Soma
• [PATCH 2/4] spi: zynq_qspi: Read only one byte at a time from txbuf   Ashok Reddy Soma
• [PATCH 3/4] spi: zynq_qspi: Add a check for baudrate and set default if not in limits   Ashok Reddy Soma
• [PATCH 4/4] spi: zynq_qspi: Add SPI memory operations to zynq qspi   Ashok Reddy Soma
• [PATCH v10 00/14] Add CAAM driver model support   Gaurav Jain
• [PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID   Heinrich Schuchardt
• [PATCH] arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH 1/2] powerpc: mpc8xx: drop CONFIG_SYS_RESET_ADDRESS   Ovidiu Panait
• [PATCH 2/2] common: drop CONFIG_SYS_RESET_ADDR   Ovidiu Panait
• [RESEND PATCH 1/2] imx: mx6ull: fix REFTOP_VBGADJ setting   Dario Binacchi
• [RESEND PATCH 2/2] mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ   Dario Binacchi
• [PATCH 00/10] board: sl28: add sl28cpld support and board cleanups   Michael Walle
• [EXT] Re: Re: [PATCH 1/2] fsl-layerscape: add dtb overlay feature   Sahil Malhotra (OSS)
• [PATCH 1/2] powerpc: mpc8xx: drop CONFIG_SYS_RESET_ADDRESS   Stefan Roese
• [PATCH 2/2] common: drop CONFIG_SYS_RESET_ADDR   Stefan Roese
• [PATCH] ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR   Patrice CHOTARD
• [PATCH 0/2] EFI: Reset system after capsule-on-disk   Masami Hiramatsu
• [PATCH 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Masami Hiramatsu
• [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• Early debug UART not working on AM33XX SoC   Felix Brack
• [PATCH 2/2] scsi: ceva: Enable PHY and reset support   Vladimir Oltean
• [PATCH v3 03/31] str: Fix a few bugs in trailing_strtoln()   Rasmus Villemoes
• [PATCH 1/2] powerpc: mpc8xx: drop CONFIG_SYS_RESET_ADDRESS   Christophe Leroy
• Please test U-Boot Allwinner F1C100s support   Giulio Benetti
• [RESEND PATCH 1/2] imx: mx6ull: fix REFTOP_VBGADJ setting   Fabio Estevam
• [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Grant Likely
• [PATCH] arm: mvebu: Espressobin: Fix URLs in comments   Stefan Roese
• [PATCH v5 0/3] arm: kirkwood: Add support for Pogoplug V4   Stefan Roese
• [PATCH] arm: kirkwood: Pogoplug V4 : Use Marvel network PHY driver   Stefan Roese
• [PATCH u-boot-marvell 00/14] Another set of kwboot improvements   Stefan Roese
• [PATCH] arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Heinrich Schuchardt
• Please test U-Boot Allwinner F1C100s support   Giulio Benetti
• [PATCH] arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Pali Rohár
• [PATCH 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• Please test U-Boot Allwinner F1C100s support   Andre Przywara
• [RESEND PATCH 2/2] mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ   Fabio Estevam
• Please test U-Boot Allwinner F1C100s support   Giulio Benetti
• [RFC PATCH v3 9/9] mkeficapsule: Add support for generating empty capsules   Sughosh Ganu
• [PATCH v6 0/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   Ariel D'Alessandro
• [PATCH v2 0/2] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• Please pull u-boot-dm   Simon Glass
• [PATCH v6 0/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   Stefano Babic
• [PATCH v6 0/1] imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board   Ariel D'Alessandro
• Please test U-Boot Allwinner F1C100s support   Andre Przywara
• Please test U-Boot Allwinner F1C100s support   Giulio Benetti
• [PATCH v2 1/2] Makefile: Create a file to indicate the config   Tom Rini
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• Please test U-Boot Allwinner F1C100s support   Andre Przywara
• [PATCH] [v3] add kaslr-seed generation to extlinux.conf   Zhang Ning
• [PATCH] [v3] add kaslr-seed generation to extlinux.conf   Zhang Ning
• [PATCH 0/8] scsi: Convert some options to Kconfig   Simon Glass
• [PATCH 1/8] sata: Drop Silicon Image SIL3114 SATA driver   Simon Glass
• [PATCH 2/8] sata: Only support BLK   Simon Glass
• [PATCH 3/8] sata: Rearrange Kconfig for SATA   Simon Glass
• [PATCH 4/8] sata: sata_sil: Only support BLK   Simon Glass
• [PATCH 5/8] ahci: Make ahci drivers depend on AHCI   Simon Glass
• [PATCH 6/8] scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE   Simon Glass
• [PATCH 7/8] Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig   Simon Glass
• [PATCH 8/8] dm: scsi: Add a migration deadline for scsi   Simon Glass
• [PATCH] [v3] add kaslr-seed generation to extlinux.conf   Tom Rini
• [PATCH v4 00/18] image: add a stage pre-load   Philippe Reynes
• [PATCH v4 01/18] arch: sandbox: add an config SANDBOX_BINMAN   Philippe Reynes
• [PATCH v4 02/18] arch: sandbox: dts: sandbox.dts: add empty binman node   Philippe Reynes
• [PATCH v4 03/18] configs: sandbox_defconfig: enable SANDBOX_BINMAN   Philippe Reynes
• [PATCH v4 04/18] lib: Kconfig: enhance help for ASN1   Philippe Reynes
• [PATCH v4 05/18] lib: Kconfig: enhance the help of OID_REGISTRY   Philippe Reynes
• [PATCH v4 06/18] lib: allow to build asn1 decoder and oid registry in SPL   Philippe Reynes
• [PATCH v4 07/18] lib: crypto: allow to build crypyo in SPL   Philippe Reynes
• [PATCH v4 08/18] lib: rsa: allow rsa verify with pkey in SPL   Philippe Reynes
• [PATCH v4 09/18] boot: image: add a stage pre-load   Philippe Reynes
• [PATCH v4 10/18] cmd: bootm: add a stage pre-load   Philippe Reynes
• [PATCH v4 11/18] common: spl: fit_ram: allow to use image pre load   Philippe Reynes
• [PATCH v4 12/18] mkimage: add public key for image pre-load stage   Philippe Reynes
• [PATCH v4 13/18] Makefile: provide sah-key to binman   Philippe Reynes
• [PATCH v4 14/18] tools: binman: add support for pre-load header   Philippe Reynes
• [PATCH v4 15/18] configs: sandbox_defconfig: enable stage pre-load in bootm   Philippe Reynes
• [PATCH v4 16/18] test: py: vboot: add test for global image signature   Philippe Reynes
• [PATCH v4 17/18] cmd: verify: initial import   Philippe Reynes
• [PATCH v4 18/18] configs: sandbox_defconfig: enable config CMD_VERIFY   Philippe Reynes
• [PATCH] arm: dts: stm32mp15: alignment with v5.17   Patrick Delaunay
• Falcon Mode Support For Uncompressed Kernel Images   Tom Rini
• Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Tom Rini
• Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Nathan Barrett-Morrison
• [PATCH] clk: update clk_clean_rate_cache to use private clk struct   Patrick Delaunay
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH] pylint: Adjust how the output is produced   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH v3] mkimage: fix segfault on MacOS arm64   Tom Rini
• Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Tom Rini
• Falcon Mode Support For Uncompressed Kernel Images   Nathan Barrett-Morrison
• [PATCH 00/10] board: sl28: add sl28cpld support and board cleanups   Tom Rini
• [PATCH] ram: stm32mp1: Unconditionally enable ASR   Marek Vasut
• Falcon Mode Support For Uncompressed Kernel Images   Tom Rini
• [PATCH 6/8] scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE   Heinrich Schuchardt
• [PATCH 6/8] scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE   Tom Rini
• [PATCH] gpio: Add gpio_request_by_line_name()   Fabio Estevam
• Early debug UART not working on AM33XX SoC   Simon Glass
• [PATCH 1/1] lib: allow printing RISC-V EFI Boot Protocol GUID   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH v2 1/2] Makefile: Create a file to indicate the config   Simon Glass
• [PATCH v3 03/31] str: Fix a few bugs in trailing_strtoln()   Simon Glass
• [PATCH 6/8] scsi: Drop CONFIG_SYS_SCSI_MAX_DEVICE   Simon Glass
• [PATCH 0/2] lib: fix snprintf() for UTF-16 strings   Simon Glass
• [PATCH] spi: Add spi_get_bus_and_cs() new use_dt param   Patrice CHOTARD
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• [PATCH 1/4] cmd: clk: test the number of argument in setfreq command   Patrick Delaunay
• [PATCH v2 1/2] Makefile: Create a file to indicate the config   Tom Rini
• [PATCH 2/4] cmd: clk: replace clk_lookup by uclass_get_device_by_name   Patrick Delaunay
• [PATCH 3/4] cmd: clk: update result of do_clk_setfreq   Patrick Delaunay
• [PATCH 4/4] cmd: clk: fix long help message   Patrick Delaunay
• [PATCH v9] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Heiko Thiery
• [PATCH 04/14] video: nexell: Drop unused and invalid code   Stefan Bosch
• [PATCH v4 0/4] imx8m: move env_get_location for imx8mn and imx8mp at board level   Tommaso Merciai
• [PATCH v4 1/4] imx8m: drop env_get_location for imx8mn and imx8mp   Tommaso Merciai
• [PATCH v4 2/4] imx: imx8mn_evk: override env_get_location   Tommaso Merciai
• [PATCH v4 3/4] imx: imx8mp_evk: override env_get_location   Tommaso Merciai
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Tommaso Merciai
• [PATCH v4 1/4] imx8m: drop env_get_location for imx8mn and imx8mp   Marek Vasut
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Marek Vasut
• [PATCH v4 1/4] imx8m: drop env_get_location for imx8mn and imx8mp   Adam Ford
• [PATCH v2 1/2] Makefile: Create a file to indicate the config   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• Please test U-Boot Allwinner F1C100s support   Jesse Taube
• [PATCH 1/2] efi_loader: Avoid using efi_update_capsule() from update capsule on disk   Heinrich Schuchardt
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• i.MX8M Mini Hangs at ATF when booting from USB   Michael Nazzareno Trimarchi
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• Please test U-Boot Allwinner F1C100s support   Giulio Benetti
• i.MX8M Mini Hangs at ATF when booting from USB   Michael Nazzareno Trimarchi
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• i.MX8M Mini Hangs at ATF when booting from USB   Adam Ford
• i.MX8M Mini Hangs at ATF when booting from USB   Michael Nazzareno Trimarchi
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [PATCH] gpio: Add gpio_request_by_line_name()   Andrew Jeffery
• [PATCH v10 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   ZHIZHIKIN Andrey
• [PATCH v10 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   Michael Walle
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Mark Kettenis
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Tom Rini
• [PATCH v1] mmc: fsl_esdhc_imx: fix watermark level in dma   Marcel Ziswiler
• [RFC PATCH v1 00/21] Modernize U-Boot shell   Tom Rini
• [PATCH v4 4/4] phytec: phycore_imx8mp: override env_get_location   Tommaso Merciai
• [PATCH v2 2/2] Makefile: Don't allow new boards with SPL_FIT_GENERATOR   Simon Glass
• [ANN] U-Boot v2022.04-rc1 released   Tom Rini