[PATCH v2 2/8] arm: kirkwood: Pogoplug V4 : Add board defconfig file

[Stefan Roese]

On 12/23/21 08:26, Tony Dinh wrote:
> Add board defconfig file for Pogoplug V4 board
> 
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>

There are very likely things missing here. Please see me comment to
patch 4/8 on this.

Thanks,
Stefan

> ---
> 
> Changes in v2:
> - Use canonical format for defconfig file
> 
>   configs/pogo_v4_defconfig | 73 +++++++++++++++++++++++++++++++++++++++
>   1 file changed, 73 insertions(+)
>   create mode 100644 configs/pogo_v4_defconfig
> 
> diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
> new file mode 100644
> index 0000000000..ab78dbcea2
> --- /dev/null
> +++ b/configs/pogo_v4_defconfig
> @@ -0,0 +1,73 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_SYS_DCACHE_OFF=y
> +CONFIG_ARCH_CPU_INIT=y
> +CONFIG_SYS_THUMB_BUILD=y
> +CONFIG_ARCH_KIRKWOOD=y
> +CONFIG_SYS_TEXT_BASE=0x600000
> +CONFIG_TARGET_POGO_V4=y
> +CONFIG_ENV_SIZE=0x20000
> +CONFIG_ENV_OFFSET=0xC0000
> +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4"
> +CONFIG_IDENT_STRING="\nPogoplug V4"
> +CONFIG_SYS_LOAD_ADDR=0x800000
> +CONFIG_BOOTSTAGE=y
> +CONFIG_SHOW_BOOT_PROGRESS=y
> +CONFIG_BOOTDELAY=10
> +CONFIG_USE_PREBOOT=y
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="Pogo_V4> "
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_BOOTM_PLAN9 is not set
> +# CONFIG_BOOTM_RTEMS is not set
> +# CONFIG_BOOTM_VXWORKS is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_MTD=y
> +CONFIG_CMD_NAND=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SATA=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_SNTP=y
> +CONFIG_CMD_DNS=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_JFFS2=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)"
> +CONFIG_CMD_UBI=y
> +CONFIG_ISO_PARTITION=y
> +CONFIG_EFI_PARTITION=y
> +CONFIG_PARTITION_TYPE_GUID=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_IN_NAND=y
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_NETCONSOLE=y
> +CONFIG_DM=y
> +CONFIG_SATA_MV=y
> +# CONFIG_MMC_HW_PARTITIONING is not set
> +CONFIG_MVEBU_MMC=y
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_DM_ETH=y
> +CONFIG_MVGBE=y
> +CONFIG_MII=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MVEBU=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_EMULATION=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_PCI=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_STORAGE=y
> 

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de