[PATCH v4 0/2] Add MNT Reform 2 board support
Patrick Wildt
patrick at blueri.se
Sat Jan 8 16:04:13 CET 2022
The MNT Reform 2 is a modular DIY laptop. In its initial version it
is based on the BoundaryDevices i.MX8MQ SoM. Some parts have been
lifted from BoundaryDevices official U-Boot downstream project.
This U-Boot patchset supports the serial console, the SD card and
eMMC, Gigabit Ethernet and USB.
Changes since v3:
- Adjusted to Binman changes in main branch.
- Cleaned up environment variables akin to i.MX8MM.
- Added vendor-prefix to device tree filename.
- Provided ramdisk_addr_r.
Changes since v2:
- Switched to Binman.
Changes since v1:
- Synced DTS with files in Linux git repo.
- Added support for USB host ports.
Patrick Wildt (2):
arm: dts: imx8mq: add MNT Reform 2
board: mntre: imx8mq: Add MNT Reform 2 board support
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi | 13 +
arch/arm/dts/imx8mq-mnt-reform2.dts | 214 ++++
arch/arm/dts/imx8mq-nitrogen-som.dtsi | 275 +++++
arch/arm/mach-imx/imx8m/Kconfig | 7 +
board/mntre/imx8mq_reform2/Kconfig | 15 +
board/mntre/imx8mq_reform2/MAINTAINERS | 7 +
board/mntre/imx8mq_reform2/Makefile | 12 +
board/mntre/imx8mq_reform2/imx8mq_reform2.c | 213 ++++
board/mntre/imx8mq_reform2/lpddr4_timing.c | 1014 +++++++++++++++++
.../mntre/imx8mq_reform2/lpddr4_timing_ch2.h | 95 ++
board/mntre/imx8mq_reform2/spl.c | 260 +++++
configs/imx8mq_reform2_defconfig | 85 ++
include/configs/imx8mq_reform2.h | 108 ++
14 files changed, 2319 insertions(+)
create mode 100644 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mq-mnt-reform2.dts
create mode 100644 arch/arm/dts/imx8mq-nitrogen-som.dtsi
create mode 100644 board/mntre/imx8mq_reform2/Kconfig
create mode 100644 board/mntre/imx8mq_reform2/MAINTAINERS
create mode 100644 board/mntre/imx8mq_reform2/Makefile
create mode 100644 board/mntre/imx8mq_reform2/imx8mq_reform2.c
create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing.c
create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h
create mode 100644 board/mntre/imx8mq_reform2/spl.c
create mode 100644 configs/imx8mq_reform2_defconfig
create mode 100644 include/configs/imx8mq_reform2.h
--
2.34.1
More information about the U-Boot
mailing list