[PATCH] arm64: zynqmp: Remove SOM *u-boot.dtsi

Michal Simek michal.simek at xilinx.com
Wed Jan 19 12:01:51 CET 2022


Disable mmc from u-boot.dtsi file because it was there only for kv260
board. With kr260 this is not needed because we will switch to full DT per
board with SD/EMMC there too.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi  | 21 --------------------
 arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi | 21 --------------------
 2 files changed, 42 deletions(-)
 delete mode 100644 arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
 delete mode 100644 arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi

diff --git a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
deleted file mode 100644
index 467df9f23a1c..000000000000
--- a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * dts file for Xilinx ZynqMP K26/KV260 SD wiring
- *
- * (C) Copyright 2020 - 2021, Xilinx, Inc.
- *
- * Michal Simek <michal.simek at xilinx.com>
- */
-
-/* SD0 only supports 3.3V, no level shifter */
-&sdhci1 { /* on CC - MIO 39 - 51 */
-	status = "okay";
-	no-1-8-v;
-	disable-wp;
-	broken-cd;
-	xlnx,mio-bank = <1>;
-	/* Do not run SD in HS mode from bootloader */
-	sdhci-caps-mask = <0 0x200000>;
-	sdhci-caps = <0 0>;
-	max-frequency = <19000000>;
-};
diff --git a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
deleted file mode 100644
index 34e6328fb66f..000000000000
--- a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * dts file for Xilinx ZynqMP Z2-VSOM
- *
- * (C) Copyright 2020 - 2021, Xilinx, Inc.
- *
- * Michal Simek <michal.simek at xilinx.com>
- */
-
-/* SD0 only supports 3.3V, no level shifter */
-&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */
-	status = "okay";
-	no-1-8-v;
-	disable-wp;
-	broken-cd;
-	xlnx,mio-bank = <1>;
-	/* Do not run SD in HS mode from bootloader */
-	sdhci-caps-mask = <0 0x200000>;
-	sdhci-caps = <0 0>;
-	max-frequency = <19000000>;
-};
-- 
2.34.1



More information about the U-Boot mailing list