[PATCH v4 1/4] imx8m: drop env_get_location for imx8mn and imx8mp
Adam Ford
aford173 at gmail.com
Mon Jan 31 18:06:01 CET 2022
On Mon, Jan 31, 2022 at 10:59 AM Tommaso Merciai
<tommaso.merciai at amarulasolutions.com> wrote:
>
> This function defined for two architecture is not really generic
> and can generate problem when people add a new board.
>
This actually fixes some issues I was trying to solve on the
imx8mn-beacon board, so thank you for doing this.
Tested-by: Adam Ford <aford173 at gmail.com> #imx8mn-beacon
> Signed-off-by: Tommaso Merciai <tommaso.merciai at amarulasolutions.com>
> ---
> arch/arm/mach-imx/imx8m/soc.c | 39 -----------------------------------
> 1 file changed, 39 deletions(-)
>
> diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
> index 863508776d..f0030a557a 100644
> --- a/arch/arm/mach-imx/imx8m/soc.c
> +++ b/arch/arm/mach-imx/imx8m/soc.c
> @@ -1313,45 +1313,6 @@ void do_error(struct pt_regs *pt_regs, unsigned int esr)
> #endif
>
> #if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
> -enum env_location env_get_location(enum env_operation op, int prio)
> -{
> - enum boot_device dev = get_boot_device();
> - enum env_location env_loc = ENVL_UNKNOWN;
> -
> - if (prio)
> - return env_loc;
> -
> - switch (dev) {
> -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
> - case QSPI_BOOT:
> - env_loc = ENVL_SPI_FLASH;
> - break;
> -#endif
> -#ifdef CONFIG_ENV_IS_IN_NAND
> - case NAND_BOOT:
> - env_loc = ENVL_NAND;
> - break;
> -#endif
> -#ifdef CONFIG_ENV_IS_IN_MMC
> - case SD1_BOOT:
> - case SD2_BOOT:
> - case SD3_BOOT:
> - case MMC1_BOOT:
> - case MMC2_BOOT:
> - case MMC3_BOOT:
> - env_loc = ENVL_MMC;
> - break;
> -#endif
> - default:
> -#if defined(CONFIG_ENV_IS_NOWHERE)
> - env_loc = ENVL_NOWHERE;
> -#endif
> - break;
> - }
> -
> - return env_loc;
> -}
> -
> #ifndef ENV_IS_EMBEDDED
> long long env_get_offset(long long defautl_offset)
> {
> --
> 2.25.1
>
More information about the U-Boot
mailing list