[PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export

[Patrick Wildt]

On Wed, Jan 12, 2022 at 05:49:44PM -0300, Fabio Estevam wrote:
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
> 
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>

Reviewed-by: Patrick Wildt <patrick at blueri.se>

> ---
>  doc/board/nxp/imx8mm_evk.rst | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst
> index b377c4de276d..b9e67b954fc2 100644
> --- a/doc/board/nxp/imx8mm_evk.rst
> +++ b/doc/board/nxp/imx8mm_evk.rst
> @@ -42,7 +42,6 @@ Build U-Boot
>  
>     $ export CROSS_COMPILE=aarch64-poky-linux-
>     $ make imx8mm_evk_defconfig
> -   $ export ATF_LOAD_ADDR=0x920000
>     $ make
>  
>  Burn the flash.bin to MicroSD card offset 33KB:
> -- 
> 2.25.1
>