[PATCH v2 09/12] configs: sunxi: Add common SUNIV header

[Jesse Taube]

On 1/26/22 08:53, Jesse Taube wrote:
> From: Icenowy Zheng <icenowy at aosc.io>
> 
> Adds support for SUNIV and the F1C100s.
> 
> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> Signed-off-by: Jesse Taube <Mr.Bossman075 at gmail.com>
> ---
> V1->V2:
> * Combine ifdefs
> * Fix indentation
> * Fix negative logic
> * Fix rebase artifacts
> * Remove CONFIG_SYS_LOAD_ADDR
> * Remove CONFIG_ENV_SECT_SIZE
> ---
>   include/configs/suniv.h        | 14 ++++++++
>   include/configs/sunxi-common.h | 59 +++++++++++++++++++++++++---------
>   2 files changed, 57 insertions(+), 16 deletions(-)
>   create mode 100644 include/configs/suniv.h
> 
> diff --git a/include/configs/suniv.h b/include/configs/suniv.h
> new file mode 100644
> index 0000000000..6118cd5e1a
> --- /dev/null
> +++ b/include/configs/suniv.h
> @@ -0,0 +1,14 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Configuration settings for new Allwinner F-series (suniv) CPU
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * Include common sunxi configuration where most the settings are
> + */
> +#include <configs/sunxi-common.h>
> +
> +#endif /* __CONFIG_H */
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 7260eb72a4..38c3321c4f 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -22,7 +22,12 @@
>   /* Serial & console */
>   #define CONFIG_SYS_NS16550_SERIAL
>   /* ns16550 reg in the low bits of cpu reg */
> +#ifdef CONFIG_MACH_SUNIV
> +/* suniv doesn't have apb2 and uart is connected to apb1 */
> +#define CONFIG_SYS_NS16550_CLK		100000000
> +#else
>   #define CONFIG_SYS_NS16550_CLK		24000000
> +#endif
>   #ifndef CONFIG_DM_SERIAL
>   # define CONFIG_SYS_NS16550_REG_SIZE	-4
>   # define CONFIG_SYS_NS16550_COM1		SUNXI_UART0_BASE
> @@ -49,6 +54,15 @@
>    * since it needs to fit in with the other values. By also #defining it
>    * we get warnings if the Kconfig value mismatches. */
>   #define CONFIG_SPL_BSS_START_ADDR	0x2ff80000
> +#elif defined(CONFIG_MACH_SUNIV)
> +#define SDRAM_OFFSET(x) 0x8##x
> +#define CONFIG_SYS_SDRAM_BASE		0x80000000
> +/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
> + * since it needs to fit in with the other values. By also #defining it
> + * we get warnings if the Kconfig value mismatches.
> + */
> +#define CONFIG_SPL_STACK_R_ADDR		0x81e00000
> +#define CONFIG_SPL_BSS_START_ADDR	0x81f80000
>   #else
>   #define SDRAM_OFFSET(x) 0x4##x
>   #define CONFIG_SYS_SDRAM_BASE		0x40000000
> @@ -186,21 +200,7 @@
>   #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
>   #define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(FF00000))
>   
> -#else
> -/*
> - * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
> - * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
> - * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
> - */
> -#ifndef CONFIG_MACH_SUN8I_V3S
> -#define BOOTM_SIZE        __stringify(0xa000000)
> -#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(2000000))
> -#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(3000000))
> -#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(3100000))
> -#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(3200000))
> -#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
> -#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(3400000))
> -#else
> +#elif defined(CONFIG_MACH_SUN8I_V3S)
>   /*
>    * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
>    * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
> @@ -213,7 +213,34 @@
>   #define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(1A00000))
>   #define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
>   #define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(1C00000))
> -#endif
> +
> +#elif defined(CONFIG_MACH_SUNIV)
> +/*
> + * 32M RAM minus 1MB heap + 8MB for u-boot, stack, fb, etc.
> + * 8M uncompressed kernel, 4M compressed kernel, 512K fdt,
> + * 512K script, 512K pxe and the ramdisk at the end.
> + */
> +#define BOOTM_SIZE        __stringify(0x1700000)
> +#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(0500000))
> +#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(0C00000))
> +#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(0C50000))
> +#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(0D00000))
> +#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(0D50000))
> +#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(0D60000))
> +
> +#else
> +/*
> + * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
> + * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
> + * 1M script, 1M pxe and the ramdisk at the end.
> + */
^^^^^^ I copied wrong comment I'll fix this in V3...
> +#define BOOTM_SIZE        __stringify(0xa000000)
> +#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(2000000))
> +#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(3000000))
> +#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(3100000))
> +#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(3200000))
> +#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
> +#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(3400000))
>   #endif
>   
>   #define MEM_LAYOUT_ENV_SETTINGS \