[RESEND PATCH v3 01/12] mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC

Sean Anderson sean.anderson at seco.com
Tue Jan 11 17:15:07 CET 2022



On 1/10/22 8:14 PM, Jaehoon Chung wrote:
> Dear Sean,
> 
> On 1/5/22 1:16 AM, Sean Anderson wrote:
>> [ fsl_esdhc commit 41dec2fe99512e941261594f522b2e7d485c314b ]
>> 
>> U-boot prefers DM_MMC + BLK for MMC. Now eSDHC driver has already
>> support it, so let's force to use it.
>> 
>> - Drop non-BLK support for DM_MMC introduced by below patch.
>>   66fa035 mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
>> 
>> - Support only DM_MMC + BLK (assuming BLK is always enabled for DM_MMC).
>> 
>> - Use DM_MMC instead of BLK for conditional compile.
> 
> 
> Thanks for resend this. But it can't apply your patch from patchwork directly.
> https://patchwork.ozlabs.org/project/uboot/patch/17862939-c7b1-310e-d98e-ce68f776ee40@seco.com/
> 
> If you're ok, I will apply after modified your patch.

That's fine; looks like it got mangled a bit by my mail client.

--Sean

> 
>> 
>> Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
>> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
>> ---
>> 
>> Changes in v3:
>> - Drop Kconfig BLK dependency
>> 
>>  drivers/mmc/fsl_esdhc_imx.c | 33 +--------------------------------
>>  1 file changed, 1 insertion(+), 32 deletions(-)
>> 
>> diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
>> index 4c06361bee..85cd72a796 100644
>> --- a/drivers/mmc/fsl_esdhc_imx.c
>> +++ b/drivers/mmc/fsl_esdhc_imx.c
>> @@ -39,10 +39,6 @@
>>  #include <dm/ofnode.h>
>>  #include <linux/iopoll.h>
>>  -#if !CONFIG_IS_ENABLED(BLK)
>> -#include "mmc_private.h"
>> -#endif
>> -
>>  #ifndef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
>>  #ifdef CONFIG_FSL_USDHC
>>  #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE    1
>> @@ -58,7 +54,6 @@ DECLARE_GLOBAL_DATA_PTR;
>>                  IRQSTATEN_DEBE | IRQSTATEN_BRR | IRQSTATEN_BWR | \
>>                  IRQSTATEN_DINT)
>>  #define MAX_TUNING_LOOP 40
>> -#define ESDHC_DRIVER_STAGE_VALUE 0xffffffff
>>   struct fsl_esdhc {
>>      uint    dsaddr;        /* SDMA system address register */
>> @@ -157,7 +152,7 @@ struct fsl_esdhc_priv {
>>      unsigned int clock;
>>      unsigned int mode;
>>      unsigned int bus_width;
>> -#if !CONFIG_IS_ENABLED(BLK)
>> +#if !CONFIG_IS_ENABLED(DM_MMC)
>>      struct mmc *mmc;
>>  #endif
>>      struct udevice *dev;
>> @@ -1510,9 +1505,6 @@ static int fsl_esdhc_probe(struct udevice *dev)
>>      struct esdhc_soc_data *data =
>>          (struct esdhc_soc_data *)dev_get_driver_data(dev);
>>      struct mmc *mmc;
>> -#if !CONFIG_IS_ENABLED(BLK)
>> -    struct blk_desc *bdesc;
>> -#endif
>>      int ret;
>>   #if CONFIG_IS_ENABLED(OF_PLATDATA)
>> @@ -1611,25 +1603,6 @@ static int fsl_esdhc_probe(struct udevice *dev)
>>      mmc = &plat->mmc;
>>      mmc->cfg = &plat->cfg;
>>      mmc->dev = dev;
>> -#if !CONFIG_IS_ENABLED(BLK)
>> -    mmc->priv = priv;
>> -
>> -    /* Setup dsr related values */
>> -    mmc->dsr_imp = 0;
>> -    mmc->dsr = ESDHC_DRIVER_STAGE_VALUE;
>> -    /* Setup the universal parts of the block interface just once */
>> -    bdesc = mmc_get_blk_desc(mmc);
>> -    bdesc->if_type = IF_TYPE_MMC;
>> -    bdesc->removable = 1;
>> -    bdesc->devnum = mmc_get_next_devnum();
>> -    bdesc->block_read = mmc_bread;
>> -    bdesc->block_write = mmc_bwrite;
>> -    bdesc->block_erase = mmc_berase;
>> -
>> -    /* setup initial part type */
>> -    bdesc->part_type = mmc->cfg->part_type;
>> -    mmc_list_add(mmc);
>> -#endif
>>       upriv->mmc = mmc;
>>  @@ -1740,14 +1713,12 @@ static const struct udevice_id fsl_esdhc_ids[] = {
>>      { /* sentinel */ }
>>  };
>>  -#if CONFIG_IS_ENABLED(BLK)
>>  static int fsl_esdhc_bind(struct udevice *dev)
>>  {
>>      struct fsl_esdhc_plat *plat = dev_get_plat(dev);
>>       return mmc_bind(dev, &plat->mmc, &plat->cfg);
>>  }
>> -#endif
>>   U_BOOT_DRIVER(fsl_esdhc) = {
>>      .name    = "fsl_esdhc",
>> @@ -1755,9 +1726,7 @@ U_BOOT_DRIVER(fsl_esdhc) = {
>>      .of_match = fsl_esdhc_ids,
>>      .of_to_plat = fsl_esdhc_of_to_plat,
>>      .ops    = &fsl_esdhc_ops,
>> -#if CONFIG_IS_ENABLED(BLK)
>>      .bind    = fsl_esdhc_bind,
>> -#endif
>>      .probe    = fsl_esdhc_probe,
>>      .plat_auto    = sizeof(struct fsl_esdhc_plat),
>>      .priv_auto    = sizeof(struct fsl_esdhc_priv),
> 


More information about the U-Boot mailing list