[PATCH 05/13] include: configs: add the librem5.h include file

[Tom Rini]

On Mon, Jan 17, 2022 at 07:07:27AM -0800, Angus Ainslie wrote:

> Initial commit of the librem5.h configuration
> 
> Signed-off-by: Angus Ainslie <angus at akkea.ca>

You'll want to use CI
(https://u-boot.readthedocs.io/en/latest/develop/ci_testing.html) to get
this tested for migrated symbols, or copy the CI logic out to a script
and do that manually as I suspect there's some symbols here that need to
be in the defconfig.  Also:

> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_SPL_THERM_SUPPORT
> +#define CONFIG_SPL_WATCHDOG_SUPPORT
> +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
> +#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
> +#define CONFIG_SPL_STACK		0x187FF0
> +#define CONFIG_SPL_GPIO_SUPPORT
> +#define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_BSS_START_ADDR      0x00180000
> +#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
> +#define CONFIG_SPL_STACK_R_ADDR		0x42300000
> +#define CONFIG_SPL_STACK_R
> +#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000	/* 512 KB */
> +#define CONFIG_SYS_ICACHE_OFF
> +#define CONFIG_SYS_DCACHE_OFF
> +
> +#define CONFIG_MALLOC_F_ADDR		0x182000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT */
> +
> +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */
> +
> +#undef CONFIG_SPL_DM_PMIC
> +#undef CONFIG_SPL_DM_I2C
> +#undef CONFIG_SPL_DM_PMIC_BD71837
> +#undef CONFIG_DM_USB
> +#undef CONFIG_SPL_DM_USB
> +#undef CONFIG_USB_DWC3_GENERIC
> +#undef CONFIG_DEVRES
> +
> +#define CONFIG_SYS_I2C
> +
> +#define CONFIG_POWER_BD71837
> +#define CONFIG_POWER_BD71837_I2C_BUS	0
> +#define CONFIG_POWER_BD71837_I2C_ADDR	0x4B
> +
> +#define CONFIG_SPL_DMA_SUPPORT
> +
> +#define CONFIG_SYS_FSL_USDHC_NUM	1
> +
> +#else /* CONFIG_SPL_BUILD*/
> +
> +#define CONFIG_SYS_FSL_USDHC_NUM	2
> +
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
> +
> +#define CONFIG_USBD_HS
> +
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +
> +#endif /* CONFIG_SPL_BUILD*/

You can't use CONFIG_SPL_BUILD in this way.  Symbols need to always be
set (and yes, this likely came from some other bad example).

[snip]
> +	"bootargs=u_boot_version=" PLAIN_VERSION "\0" \

Why do you need this?  It might be a problem for reproducible builds,
and also you should just be able to use ${version} from the environment?
Thanks.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220117/3f58af88/attachment.sig>