[PATCH 1/2] arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()

[Pali Rohár]

Code in board_fix_fdt() already detects connected MOX modules so there is
no need to have custom comphy_update_map() function for setting serdes
speeds.

This change sets phy-mode for MOX SFP module (when present) to sgmii.
Comphy driver then sets sgmii serdes speed for this module to 1.25G.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 board/CZ.NIC/turris_mox/turris_mox.c | 48 +++++++++-------------------
 1 file changed, 15 insertions(+), 33 deletions(-)

diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 3eb5cb425606..f0c5aa6a520b 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -21,7 +21,6 @@
 #include <linux/libfdt.h>
 #include <linux/string.h>
 #include <miiphy.h>
-#include <mvebu/comphy.h>
 #include <spi.h>
 
 #include "mox_sp.h"
@@ -49,6 +48,7 @@ int board_fix_fdt(void *blob)
 	enum fdt_status status_pcie, status_eth1;
 	u8 topology[MAX_MOX_MODULES];
 	int i, size, ret;
+	bool eth1_sgmii;
 
 	/*
 	 * SPI driver is not loaded in driver model yet, but we have to find out
@@ -69,6 +69,7 @@ int board_fix_fdt(void *blob)
 
 	status_pcie = FDT_STATUS_DISABLED;
 	status_eth1 = FDT_STATUS_DISABLED;
+	eth1_sgmii = false;
 
 	for (i = 0; i < MAX_MOX_MODULES; ++i) {
 		writel(0x0, ARMADA_37XX_SPI_DOUT);
@@ -82,6 +83,10 @@ int board_fix_fdt(void *blob)
 
 		topology[i] &= 0xf;
 
+		if (topology[i] == MOX_MODULE_SFP &&
+		    status_pcie == FDT_STATUS_DISABLED)
+			eth1_sgmii = true;
+
 		if (topology[i] == MOX_MODULE_SFP ||
 		    topology[i] == MOX_MODULE_TOPAZ ||
 		    topology[i] == MOX_MODULE_PERIDOT)
@@ -98,6 +103,15 @@ int board_fix_fdt(void *blob)
 		printf("Cannot set status for eth1 in U-Boot's device tree: %s!\n",
 		       fdt_strerror(ret));
 
+	if (eth1_sgmii) {
+		ret = fdt_path_offset(blob, "ethernet1");
+		if (ret >= 0)
+			ret = fdt_setprop_string(blob, ret, "phy-mode", "sgmii");
+		if (ret < 0)
+			printf("Cannot set phy-mode for eth1 to sgmii in U-Boot device tree: %s!\n",
+			       fdt_strerror(ret));
+	}
+
 	if (size > 1 && (topology[1] == MOX_MODULE_PCI ||
 			 topology[1] == MOX_MODULE_USB3 ||
 			 topology[1] == MOX_MODULE_PASSPCI))
@@ -199,38 +213,6 @@ static int mox_get_topology(const u8 **ptopology, int *psize, int *pis_sd)
 	return 0;
 }
 
-int comphy_update_map(struct comphy_map *serdes_map, int count)
-{
-	int ret, i, size, sfpindex = -1, swindex = -1;
-	const u8 *topology;
-
-	ret = mox_get_topology(&topology, &size, NULL);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < size; ++i) {
-		if (topology[i] == MOX_MODULE_SFP && sfpindex == -1)
-			sfpindex = i;
-		else if ((topology[i] == MOX_MODULE_TOPAZ ||
-			  topology[i] == MOX_MODULE_PERIDOT) &&
-			 swindex == -1)
-			swindex = i;
-	}
-
-	if (sfpindex >= 0 && swindex >= 0) {
-		if (sfpindex < swindex)
-			serdes_map[0].speed = COMPHY_SPEED_1_25G;
-		else
-			serdes_map[0].speed = COMPHY_SPEED_3_125G;
-	} else if (sfpindex >= 0) {
-		serdes_map[0].speed = COMPHY_SPEED_1_25G;
-	} else if (swindex >= 0) {
-		serdes_map[0].speed = COMPHY_SPEED_3_125G;
-	}
-
-	return 0;
-}
-
 #define SW_SMI_CMD_R(d, r)	(0x9800 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 #define SW_SMI_CMD_W(d, r)	(0x9400 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 
-- 
2.20.1