[PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi

[Heiko Thiery]

When using a board variant that selects the lvds specific dtb the
*.u-boot.dtsi file will not be included. To have a lvds dtb specific
u-boot.dtsi file move this part to a common board u-boot.dtsi file and
include this in the board base u-boot.dtsi and create an additional one
for the lvds variant.

Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>
---
 .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi   |   6 +
 .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi    | 124 +----------------
 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 128 ++++++++++++++++++
 3 files changed, 135 insertions(+), 123 deletions(-)
 create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi

diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
new file mode 100644
index 0000000000..4bf75722bf
--- /dev/null
+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+#include "imx8mm-kontron-n801x-u-boot.dtsi"
diff --git a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
index 22d18e6f1c..4bf75722bf 100644
--- a/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-kontron-n801x-s-u-boot.dtsi
@@ -3,126 +3,4 @@
  * Copyright (C) 2019 Kontron Electronics GmbH
  */
 
-#include "imx8mm-u-boot.dtsi"
-
-/ {
-	aliases {
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-	};
-
-	wdt-reboot {
-		compatible = "wdt-reboot";
-		wdt = <&wdog1>;
-		u-boot,dm-spl;
-	};
-
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-};
-
-&fec1 {
-	phy-mode = "rgmii-rxid";
-};
-
-&i2c1 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&i2c2 {
-	status = "okay";
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&pinctrl_ecspi1 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_i2c1 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_pmic {
-	u-boot,dm-spl;
-	fsl,pins = <
-		MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
-		/* Disable Pullup for SD_VSEL */
-		MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x41
-	>;
-};
-
-&pinctrl_uart3 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&pinctrl_usdhc1 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc1_100mhz {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc1_200mhz {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2 {
-	u-boot,dm-spl;
-};
-
-&pca9450 {
-	u-boot,dm-spl;
-};
-
-&{/soc at 0/bus at 30800000/i2c at 30a20000/pmic at 25/regulators} {
-	u-boot,dm-spl;
-};
-
-&ecspi1 {
-	u-boot,dm-spl;
-};
-
-&gpio1 {
-	u-boot,dm-spl;
-};
-
-&gpio2 {
-	u-boot,dm-spl;
-};
-
-&gpio3 {
-	u-boot,dm-spl;
-};
-
-&gpio4 {
-	u-boot,dm-spl;
-};
-
-&gpio5 {
-	u-boot,dm-spl;
-};
-
-&uart3 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&usdhc1 {
-	u-boot,dm-spl;
-};
-
-&usdhc2 {
-	u-boot,dm-spl;
-};
-
-&wdog1 {
-	u-boot,dm-spl;
-};
+#include "imx8mm-kontron-n801x-u-boot.dtsi"
diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
new file mode 100644
index 0000000000..22d18e6f1c
--- /dev/null
+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rgmii-rxid";
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&i2c2 {
+	status = "okay";
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+	fsl,pins = <
+		MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		/* Disable Pullup for SD_VSEL */
+		MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x41
+	>;
+};
+
+&pinctrl_uart3 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1_100mhz {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc1_200mhz {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pca9450 {
+	u-boot,dm-spl;
+};
+
+&{/soc at 0/bus at 30800000/i2c at 30a20000/pmic at 25/regulators} {
+	u-boot,dm-spl;
+};
+
+&ecspi1 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	u-boot,dm-spl;
+	u-boot,dm-pre-reloc;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
-- 
2.30.2