[PATCH v3 04/11] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level
Amjad Ouled-Ameur
aouledameur at baylibre.com
Tue Jan 18 11:12:42 CET 2022
From: Keerthy <j-keerthy at ti.com>
Enable fs_loader compilation at SPL Level.
Signed-off-by: Keerthy <j-keerthy at ti.com>
[Amjad: fix compilation failures for J721e platform]
Signed-off-by: Amjad Ouled-Ameur <aouledameur at baylibre.com>
---
(no changes since v1)
arch/arm/mach-k3/common.c | 10 +++-------
configs/j721e_evm_r5_defconfig | 1 +
configs/j721e_hs_evm_r5_defconfig | 1 +
drivers/misc/Kconfig | 9 +++++++++
drivers/misc/Makefile | 2 +-
5 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 39d00270b7fa..b4b75f4e6c86 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -156,13 +156,15 @@ void init_env(void)
#endif
}
-#ifdef CONFIG_FS_LOADER
int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
{
struct udevice *fsdev;
char *name = NULL;
int size = 0;
+ if (!IS_ENABLED(CONFIG_FS_LOADER))
+ return 0;
+
*loadaddr = 0;
#ifdef CONFIG_SPL_ENV_SUPPORT
switch (spl_boot_device()) {
@@ -186,12 +188,6 @@ int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
return size;
}
-#else
-int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
-{
- return 0;
-}
-#endif
__weak void release_resources_for_core_shutdown(void)
{
diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig
index b0759d1f305d..1fb13a8a707d 100644
--- a/configs/j721e_evm_r5_defconfig
+++ b/configs/j721e_evm_r5_defconfig
@@ -88,6 +88,7 @@ CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
CONFIG_ESM_K3=y
CONFIG_K3_AVS0=y
CONFIG_ESM_PMIC=y
diff --git a/configs/j721e_hs_evm_r5_defconfig b/configs/j721e_hs_evm_r5_defconfig
index 3d2bbb4844e8..1e4a93ff53fe 100644
--- a/configs/j721e_hs_evm_r5_defconfig
+++ b/configs/j721e_hs_evm_r5_defconfig
@@ -82,6 +82,7 @@ CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
CONFIG_K3_AVS0=y
CONFIG_MMC_SDHCI=y
CONFIG_SPL_MMC_SDHCI_ADMA=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a8baaeaf5cfe..0ade3e32b0ef 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -453,6 +453,15 @@ config FS_LOADER
The consumer driver would then use this loader to program whatever,
ie. the FPGA device.
+config SPL_FS_LOADER
+ bool "Enable loader driver for file system"
+ help
+ This is file system generic loader which can be used to load
+ the file image from the storage into target such as memory.
+
+ The consumer driver would then use this loader to program whatever,
+ ie. the FPGA device.
+
config GDSYS_SOC
bool "Enable gdsys SOC driver"
depends on MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f9826d2462d1..bca7b24e99ad 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,7 +37,7 @@ obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
-obj-$(CONFIG_FS_LOADER) += fs_loader.o
+obj-$(CONFIG_$(SPL_)FS_LOADER) += fs_loader.o
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
obj-$(CONFIG_GDSYS_SOC) += gdsys_soc.o
--
2.25.1
More information about the U-Boot
mailing list